Skip Nav Destination
Focus and Coverage
Nanotechnology and Precision Engineering (NPE) is a peer-reviewed, interdisciplinary research journal that covers all areas related to nanotechnology and precision engineering, which provides a forum for researchers of the related field all over the world. Published four times per year, NPE publishes original research articles, reviews, communications and discussions.
RSS feed
Most Recent
Research Article
|
August 23 2023
A. Arivarasi, D. Thiripurasundari et al.
Stroke represents a severe, widespread, and widely acknowledged health crisis on both national and international levels. It is one of the most prevalent life-threatening conditions. Despite ...
Research Article
|
August 04 2023
Wuqin Li, Yongyong Zhu et al.
Ultrasonic peen forming (UPF) is an emerging technology that exhibits great superiority in both its flexible operating modes and the deep residual stress that it produces compared with conventional ...
Research Article
|
July 20 2023
Cong Ma, Zehang Gao et al.
In this work, an automated microfluidic chip that uses negative pressure to sample and analyze solutions with high temporal resolution was developed. The chip has a T-shaped channel for mixing the ...
Featured Articles
Review Article
|
June 29 2023
Yuanming Ye, Haochao Wang et al.
Epidermal electrophysiological monitoring has garnered significant attention for its potential in medical diagnosis and healthcare, particularly in continuous signal recording. However, ...
Research Article
|
June 13 2023
Cong Zhai, Yujian Hong et al.
Microspheres can break the diffraction limit and magnify nano-structure imaging, and with its advantages of low cost and label-free operation, microsphere-assisted imaging has become an irreplaceable ...
Research Article
|
April 03 2023
Ruiyun Zhang, Xuexin Duan et al.
Microfluidic phenotyping methods have been of vital importance for cellular characterization, especially for evaluating single cells. In order to study the deformability of a single cell, we devised ...
Editor's Picks
Research Article
|
August 04 2023
Wuqin Li, Yongyong Zhu et al.
Ultrasonic peen forming (UPF) is an emerging technology that exhibits great superiority in both its flexible operating modes and the deep residual stress that it produces compared with conventional ...
Research Article
|
June 14 2023
Hanliang Liu, Guolong Zhao et al.
Conventional mechanical machining of a composite material comprising an aluminum matrix reinforced with a high volume fraction of SiC particles (hereinafter referred to as an SiCp/Al composite) faces ...
Research Article
|
May 17 2023
Mucun Li, Enxiu Wu et al.
Using hexagonal boron nitride (h-BN) to prepare resistive switching devices is a promising strategy. Various doping methods have aroused great interest in the semiconductor field in recent years, but ...