The traditional technique for the experimental characterization of the shear stress relaxation modulus by applying a step shear strain was investigated using flow visualization. A high-speed camera was employed in conjunction with cone-and-plate and parallel-disk fixtures of a Rheometric Scientific Advanced Rheometric Expansion System rheometer. In the nonlinear region the true shear strain imposed on a polyethylene melt deviates considerably from the targeted strain. The main source of the deviation is the wall slip of the polymer melt. The presence of wall slip reduces significantly the range of strains for which the strain-dependent relaxation modulus can be determined for the linear polyethylene melt. Errors associated with the control of the motion of the tool which introduces the shear strain are also documented.
Skip Nav Destination
Article navigation
March 2001
Research Article|
March 01 2001
Step strain flow: Wall slip effects and other error sources
Halil Gevgilili;
Halil Gevgilili
Chemical, Biochemical and Material Engineering Department, Stevens Institute of Technology, Castle Point Station, Hoboken, New Jersey 07030
Search for other works by this author on:
Dilhan M. Kalyon
Dilhan M. Kalyon
Chemical, Biochemical and Material Engineering Department, Stevens Institute of Technology, Castle Point Station, Hoboken, New Jersey 07030
Search for other works by this author on:
J. Rheol. 45, 467–475 (2001)
Article history
Received:
July 05 2000
Citation
Halil Gevgilili, Dilhan M. Kalyon; Step strain flow: Wall slip effects and other error sources. J. Rheol. 1 March 2001; 45 (2): 467–475. https://doi.org/10.1122/1.1339248
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Pay-Per-View Access
$40.00
Citing articles via
Evaluation of a novel multimode interfacial rheometer
Daniel Ashkenazi, Kiet Pham, et al.
Composite entanglement topology and extensional rheology of symmetric ring-linear polymer blends
Thomas C. O’Connor, Ting Ge, et al.