Skip to Main Content
Umbrella Alt Text
header search
Search
Advanced Search |Citation Search
Skip Nav Destination

Design of roll-to-roll printing equipment with multiple printing methods for multi-layer printing

Rev. Sci. Instrum. 83, 065001 (2012)
This article has been cited by the following articles in journals that are participating in CrossRef Cited-by Linking.
Image Data-Centric Visual Feature Selection on Roll-to-Roll Slot-Die Coating Systems for Edge Wave Coating Defect Detection
  • Yoonjae Lee
  • Junyoung Yun
  • Sangbin Lee
  • Changwoo Lee
Polymers 16, 1156 (2024)
Non-Destructive Elemental Analysis of Raster Roller Damage Using X-ray Fluorescence Spectroscopy
  • Edyta Małachowska
  • Aneta Lipkiewicz
  • Marcin Dubowik
  • Robert Drozd
  • Piotr Przybysz
Coatings 13, 1398 (2023)
3D printing aqueous Ti3C2Tx inks for MXene-based energy devices
  • Mofetoluwa Fagade
  • Dhanush Patil
  • Sri Vaishnavi Thummalapalli
  • Sayli Jambhulkar
  • Dharneedar Ravichandran
  • Arunachala M. Kannan
  • Kenan Song
Materials Advances 4, 4103 (2023)
Self‐Encapsulated Cu Grid for Highly Transparent Conductive Electrode for Transparent Heater and Electrochemical Supercapacitor Applications
  • Vivekanandan Raman
  • Aravindha Raja Selvaraj
  • Seong‐Won Kim
  • Kandasamy Prabakar
  • Han‐Ki Kim
Advanced Electronic Materials (2022) 8 (12)
Tension modeling and precise tension control of roll-to-roll system for flexible electronics
  • Jaehyeong Jeong
  • Anton Nailevich Gafurov
  • Pyoungwon Park
  • Inyoung Kim
  • Hyun-Chang Kim
  • Dongwoo Kang
  • Dongho Oh
  • Taik-Min Lee
Flexible and Printed Electronics 6, 015005 (2021)
Present status of the functional advanced micro-, nano-printings – a mini review
  • K. Mondal
  • M.D. McMurtrey
Materials Today Chemistry (2020) 17: 100328.
Preview control of web position in roll-to-roll printing using alignment patterns
  • Byeongcheol Lee
  • Youngjin Kim
  • Jihyeon Kim
  • Jimin Park
  • Hyeongrae Kim
  • Dongho Oh
Microsystem Technologies 26, 3315 (2020)
ITO and graphene-covered Ag grids embedded in PET substrate by thermal roll imprinting for flexible organic solar cells
  • Vivekanandan Raman
  • Jeongdai Jo
  • Han-Ki Kim
Materials Science in Semiconductor Processing (2020) 120: 105277.
Dynamic characteristics of printing cylinder with rotating dynamic load
  • Xiaofei Lei
  • Heping Hou
  • Zhaoshuan Zha
  • Shanhui Liu
  • Boyang Xu
  • Peng Liu
Mathematical Models in Engineering 6, 50 (2020)
A precise position measurement system of roll-to-roll printing using burst alignment patterns
  • Taehyeong Kim
  • Youngjin Kim
  • Jihyeon Kim
  • Byeongcheol Lee
  • Jimin Park
  • Dongho Oh
Microsystem Technologies 26, 231 (2020)
Instrument for fine control of drop-on-demand electrohydrodynamic jet printing by current measurement
  • Kai Li
  • Dazhi Wang
  • Shanshan Yi
  • Haoran Jia
  • Jianghong Qian
  • Zhiyuan Du
  • Tongqun Ren
  • Junsheng Liang
  • Sergio O. Martinez-Chapa
  • Marc Madou
Review of Scientific Instruments (2019) 90 (11)
Virtual sensing and virtual metrology for spatial error monitoring of roll-to-roll manufacturing systems
  • Xiaoning Jin
  • Huanyi Shui
  • Moshe Shpitalni
CIRP Annals 68, 491 (2019)
Reduction of Linearly Varying Term of Register Errors Using a Dancer System in Roll-to-Roll Printing Equipment for Printed Electronics
  • Cheol Kim
  • Sung Woong Jeon
  • Chung Hwan Kim
International Journal of Precision Engineering and Manufacturing 20, 1485 (2019)
Development of doctoring apparatus capable of measurement and control of doctoring angle and force in printing equipment for printed electronics
  • Sungwoong Jeon
  • Cheol Kim
  • Chung Hwan Kim
Measurement Science and Technology 29, 095006 (2018)
Roll‐to‐Roll Fabrication of Solution Processed Electronics
  • Robert Abbel
  • Yulia Galagan
  • Pim Groen
Advanced Engineering Materials (2018) 20 (8)
Development of an aerostatic bearing system for roll-to-roll printed electronics
  • Shasha Chen
  • Weihai Chen
  • Jingmeng Liu
  • Wenjie Chen
  • Yan Jin
Journal of Micromechanics and Microengineering 28, 065002 (2018)
High-speed Sintering of Ag-based Composite Ink by Nano-soldering
  • Woo Lim Choi
  • Jong-Hyun Lee
Journal of Welding and Joining 36, 7 (2018)
High-Precision Printing Force Control System for Roll-to-Roll Manufacturing
  • Young-Man Choi
  • Dongwoo Kang
  • Sungsoo Lim
  • Moon Gu Lee
  • Seung-Hyun Lee
IEEE/ASME Transactions on Mechatronics 22, 2351 (2017)
Measurement of position accuracy of engraving in plate roller and its effect on register accuracy in roll-to-roll multi-layer printing
  • Cheol Kim
  • Sung Woong Jeon
  • Chung Hwan Kim
Measurement Science and Technology 28, 125002 (2017)
Design of a novel 5-DOF flexure-based compound alignment stage for Roll-to-Roll Printed Electronics
  • Weihai Chen
  • Shang Yang
  • Jingmeng Liu
  • Wenjie Chen
  • Yan Jin
Review of Scientific Instruments (2017) 88 (2)
Recent Progress in the Development of Printed Thin‐Film Transistors and Circuits with High‐Resolution Printing Technology
  • Kenjiro Fukuda
  • Takao Someya
Advanced Materials (2017) 29 (25)
Precision measurement of Z-slide vertical error motion of an ultra-precision lathe by using three-probe method
  • Zengyuan Niu
  • Yuan-Liu Chen
  • Daiki Matsuura
  • Jung Chul Lee
  • Ryo Kobayashi
  • Yuki Shimizu
  • So Ito
  • Wei Gao
  • Jeong Seok Oh
  • Chun Hong Park
International Journal of Precision Engineering and Manufacturing 18, 651 (2017)
Bending reliability of printed conductors deposited on plastic foil with various silver pastes
  • Tuomas Happonen
  • Tapio Ritvonen
  • Pentti Korhonen
  • Juha Häkkinen
  • Tapio Fabritius
The International Journal of Advanced Manufacturing Technology 82, 1663 (2016)
The influence of distortion on enhancing the registration accuracy in roll-to-roll printing processes
  • Young Min Lee
  • Ok Jin Kim
  • Dong Kwon Choi
  • Jae-Woong Yu
Macromolecular Research 24, 1062 (2016)
Practical Design Guidelines for the Development of High-Precision Roll-to-Roll Slot-Die Coating Equipment and the Process
  • Jinwoo Seong
  • Janghoon Park
  • Jongsu Lee
  • Byoungjoon Ahn
  • Joong Hyun Yeom
  • Jaemin Kim
  • Tomi Hassinen
  • Sehun Rhee
  • Sunglim Ko
  • Dongjin Lee
  • Kee-Hyun Shin
IEEE Transactions on Components, Packaging and Manufacturing Technology 6, 1677 (2016)
Laser direct writing of 40 GHz RF components on flexible substrates
  • F. Zacharatos
  • N. Iliadis
  • J. Kanakis
  • P. Bakopoulos
  • H. Avramopoulos
  • I. Zergioti
Optics & Laser Technology (2016) 79: 108.
A robust position measurement system for precision alignment of roll-to-roll printing using alignment patterns and light quantity
  • Minkyu Jung
  • Youngjin Kim
  • Dongho Oh
Microsystem Technologies 22, 1381 (2016)
Modeling the Lifetime of Printed Silver Conductors in Cyclic Bending With the Coffin–Manson Relation
  • T. Happonen
  • T. Ritvonen
  • P. Korhonen
  • J. Hakkinen
  • T. Fabritius
IEEE Transactions on Device and Materials Reliability 16, 25 (2016)
Assessment of printability for printed electronics patterns by measuring geometric dimensions and defining assessment parameters
  • Sung Woong Jeon
  • Cheol Kim
  • Chung Hwan Kim
Journal of Mechanical Science and Technology 30, 5625 (2016)
A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors
  • Wookyu Lee
  • Hyunmo Koo
  • Junfeng Sun
  • Jinsoo Noh
  • Kye-Si Kwon
  • Chiseon Yeom
  • Younchang Choi
  • Kevin Chen
  • Ali Javey
  • Gyoujin Cho
Scientific Reports (2015) 5 (1)
Overlay accuracy on a flexible web with a roll printing process based on a roll-to-roll system
  • Jaehyuk Chang
  • Sunggun Lee
  • Ki Beom Lee
  • Seungjun Lee
  • Young Tae Cho
  • Jungwoo Seo
  • Sukwon Lee
  • Gugrae Jo
  • Ki-yong Lee
  • Hyang-Shik Kong
  • Sin Kwon
Review of Scientific Instruments (2015) 86 (5)
Cyclic Bending Reliability of Silk Screen Printed Silver Traces on Plastic and Paper Substrates
  • Tuomas Happonen
  • Juha Hakkinen
  • Tapio Fabritius
IEEE Transactions on Device and Materials Reliability 15, 394 (2015)
Commercialization & Process Optimization of Protective Film on Nano Silver Transparent Conductive Substrate by Means of Large Scale Roll-to-Roll Coating and Experimental Design
  • Kwang-Min Park
  • Ji-Hoon Lee
Journal of the Korean Institute of Electrical and Electronic Material Engineers 28, 813 (2015)
All-solid-state flexible supercapacitors by fast laser annealing of printed metal nanoparticle layers
  • Habeom Lee
  • Sukjoon Hong
  • Jinhyeong Kwon
  • Young D. Suh
  • Jinhwan Lee
  • Hyunjin Moon
  • Junyeob Yeo
  • Seung Hwan Ko
Journal of Materials Chemistry A 3, 8339 (2015)
A novel flexure-based register system for R2R electronic printing
  • Jingmeng Liu
  • Shuaike Kang
  • Weihai Chen
  • Wenjie Chen
  • Jun Jiang
Microsystem Technologies 21, 2347 (2015)
Measurement of Geometric Properties of Printed Patterns and Evaluation of their Printability
  • Sung Woong Jeon
  • Cheol Kim
  • Jong-Chan Park
  • Dong Soo Kim
  • Chung Hwan Kim
Journal of the Korean Society for Precision Engineering 31, 981 (2014)
Tension control of web of winder span using adaptive gain control method
  • Jong-Chan Park
  • Sung Woong Jeon
  • Ki Sang Nam
  • Lei Liu
  • Junfeng Sun
  • Chung Hwan Kim
Japanese Journal of Applied Physics 53, 05HC11 (2014)
Lateral control system for roll-to-roll fabrication process of organic photovoltaic
  • Hwiyong Choi
  • Dae-Hun Kang
  • Jaewon Lee
  • Sangyoon Lee
Japanese Journal of Applied Physics 53, 05HC09 (2014)
Improvement of Recognition of Register Errors and Register Control in Roll-to-roll Printing Equipment by Data Compensation
  • Sung Woong Jeon
  • Jong-Chan Park
  • Ki-Sang Nam
  • Cheol Kim
  • Dong Soo Kim
  • Chung Hwan Kim
Journal of the Korean Society for Precision Engineering 31, 987 (2014)
Flexible supercapacitor fabrication by room temperature rapid laser processing of roll-to-roll printed metal nanoparticle ink for wearable electronics application
  • Junyeob Yeo
  • Geonwoong Kim
  • Sukjoon Hong
  • Min Su Kim
  • Daewon Kim
  • Jinhwan Lee
  • Ha Beom Lee
  • Jinhyeong Kwon
  • Young Duk Suh
  • Hyun Wook Kang
  • Hyung Jin Sung
  • Jun-Ho Choi
  • Won-Hwa Hong
  • Jang Myoun Ko
  • Seung-Hyun Lee
  • Sung-Hoon Choa
  • Seung Hwan Ko
Journal of Power Sources (2014) 246: 562.
In situmonitoring of a flash light sintering process using silver nano-ink for producing flexible electronics
  • Wan-Ho Chung
  • Hyun-Jun Hwang
  • Seung-Hyun Lee
  • Hak-Sung Kim
Nanotechnology 24, 035202 (2013)
Key factors to improve the efficiency of roll-to-roll printed organic photovoltaics
  • Christos Koidis
  • Stergios Logothetidis
  • Apostolos Ioakeimidis
  • Argiris Laskarakis
  • Christos Kapnopoulos
Organic Electronics 14, 1744 (2013)
Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics
  • C. Koidis
  • S. Logothetidis
  • S. Kassavetis
  • C. Kapnopoulos
  • P.G. Karagiannidis
  • D. Georgiou
  • A. Laskarakis
Solar Energy Materials and Solar Cells (2013) 112: 36.
Variable PID Gain Control of Winder Tension of Roll-to-Roll Printing System using Estimation of Winder-Roll Radius
  • Jong-Chan Park
  • Sung Woong Jeon
  • Ki Sang Nam
  • Chung Hwan Kim
Journal of manufacturing engineering & technology 22, 755 (2013)
Roll‐to‐Roll fabrication of large area functional organic materials
  • Roar R. Søndergaard
  • Markus Hösel
  • Frederik C. Krebs
Journal of Polymer Science Part B: Polymer Physics 51, 16 (2013)
  • Online ISSN 1089-7623
  • Print ISSN 0034-6748

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

  • © Copyright AIP Publishing LLC
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal