Evaluation of 3D printed buckyball-shaped cathodes of titanium and stainless-steel for IEC fusion system

Skip Nav Destination

Phys. Plasmas 28, 012706 (2021)

This article has been cited by the following articles in journals that are participating in CrossRef Cited-by Linking.

Nondestructive and active interrogation system for special nuclear material: proof of principle and initial results

Mahmoud Bakr
Kai Masuda
Yoshiyuki Takahashi
Tsuyoshi Misawa
Norio Yamakawa
Tomas Scott

Nuclear Science and Techniques (2024) 35 (5)

A systematic approach to the modelling and comparison of the geometries of spherical electrodes in inertial electrostatic confinement fusion devices

Jan-Philipp Wulfkühler
Hai-Dang Nguyen
Leo Peiffer
Martin Tajmar

Scientific Reports (2024) 14 (1)

Influence of the Hydrogen Isotope Affinity of the Cathode Coating Material on the Neutron Production Rate in the Glow Discharge–Type Fusion Neutron Source

Toshiro Sakabe
Yasuyuki Ogino
Keisuke Mukai
Juro Yagi
Mahmoud Bakr

Fusion Science and Technology 80, 653 (2024)

Radiation shielding for inertial electrostatic confinement fusion system utilizing concrete and water

Mahmoud Bakr
Rawheya Ahmed
Tom Wallace Smith
Talmon Firston
Thomas B. Scott

Journal of Radiation Research and Applied Sciences 17, 100908 (2024)

Cathode cooling effects on the neutron production rate in the glow discharge type of fusion neutron source

Toshiro Sakabe
Takaya Ishii
Keisuke Mukai
Juro Yagi

Journal of Applied Physics (2024) 136 (4)

Improvement in ion confinement time with multigrid configuration in an inertial electrostatic confinement fusion device

L. Saikia
S. Adhikari
S. R. Mohanty
D. Bhattacharjee

Physical Review E (2024) 110 (1)

Studies on ion flow dynamics in a disk-shaped inertial electrostatic confinement fusion device under the influence of a triple grid arrangement

L. Saikia
D. Bhattacharjee
S. R. Mohanty
S. Adhikari

Physics of Plasmas (2023) 30 (2)

Influence of electrodes' geometrical properties on the neutron production rate of a discharge fusion neutron source

M. Bakr
T. Sakabe
J.-P. Wulfkühler
K. Mukai
T. W. Smith
Y. Ogino
M. Tajmar
T. Scott
S. Konishi

Physics of Plasmas (2023) 30 (3)

Investigating the effect of changing parameters in the IEC device in comparative study

H. Ghammas
M.N. Nasrabadi

Nuclear Engineering and Technology (2023)

Assessment of Five Concrete Types as Candidate Shielding Materials for a Compact Radiation Source Based on the IECF

Rawheya Ahmed
Galal Saad Hassan
Thomas Scott
Mahmoud Bakr

Materials 16, 2845 (2023)

Employing of ZrCo as a fuel source in a discharge-type fusion neutron source operated in self-sufficient mode

Shunsuke Kenjo
Yasuyuki Ogino
Keisuke Mukai
Mahmoud Bakr
Juro Yagi
Satoshi Konishi

International Journal of Hydrogen Energy 47, 3054 (2022)

Effects of Metal Hydride Coatings at the Electrodes on Neutron Production Rate in a Discharge-Type Fusion Neutron Source

T. Sakabe
S. Kenjo
Y. Ogino
K. Mukai
M. Bakr
J. Yagi
S. Konishi

IEEE Transactions on Plasma Science 50, 4500 (2022)

Electric potential in a magnetically confined virtual cathode fusion device

Richard Bowden-Reid
Joe Khachan

Physics of Plasmas (2021) 28 (4)

Characterization of an ultra-compact neutron source based on an IEC fusion device and its prospective applications in radiography

Mahmoud Bakr
Keisuke Mukai
Kai Masuda
Juro Yagi
Satoshi Konishi

Fusion Engineering and Design (2021) 167: 112346.

Evaluation of 3D printed buckyball-shaped cathodes of titanium and stainless-steel for IEC fusion system

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

Evaluation of 3D printed buckyball-shaped cathodes of titanium and stainless-steel for IEC fusion system

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only