How most glass is manufactured today is similar to how it was made in ancient times. During the process, large volumes of silica particles are heated in a binding resin to around 1100 °C and then compacted to form a solid mass of material. Not only is the method energy-intensive, but it also prevents manufacturers from using glass in various optoelectrical systems: Other compounds that are necessary in advanced electronics have much lower melting points. This micrograph shows novel parabolic glass lenses that were manufactured at a temperature 500 °C lower than that of the usual method of making glass. These optical-grade lenses are just a few tens of micrometers in diameter. They could be used, for example, to precisely focus light onto individual pixels of camera sensors.
Jens Bauer, of the Karlsruhe Institute of Technology in Germany, and colleagues developed a 3D-printing protocol to make the microlenses and many...
