Presently, there is a growing demand from the industry for microprocessing of materials. In particular, for applications in the field of microsystems technology it is necessary to produce structures with dimensions down to the micrometer scale especially in materials that could not or not good processed by conventional microelectronic technologies.

We have been investigating the drilling of anodic bondable PYREX glass by means of laser microprocessing using the excimer laser mask projection technique (248 nm or 193 nm wavelength, 10 ns pulse duration, 8 mJ pulse energy, 500 Hz repetition rate). We will show the dependence of the processing results on the laser parameters. The diameter of the holes ranges from 30 to 100 micron at the front side and from 1 to 50 micron at the rear side of the 500 micron thick wafer.

We observed the formation of cracks in the laser processed region. Accordingly, we found distinct relations between the process parameters and the quality of the walls of the drilled holes. Especially the change from 248 to 193 nm Wavelength led to a distinct decrease of crack formation but the wall at the rear side of the wafer shows still a break off of some material. As solution the drilling of the wafer from both sides of the wafer allows us to produce crack free holes.

1.
B.
Wolff
,
P.
Simon
.
Nanosecond and Femtosecond Excimer Laser Ablation of Fused Silica
.
Applied Physics A
54
, (
1992
) pp.
363
368
2.
R.
Nowak
,
S.
Metev
,
G.
Sepold
.
Excimer laser processing of BK7 and BGG31 glasses
.
Glastechnische Berichte
,
66
(
1993
) No.
4
, pp.
227
233
3.
C.
Buerhop
;
N.
Lutz
;
R.
Weißmann;
G.
Tomandi
.
Surface treatment of glass and ceramics using XeCl excimer laser radiation
.
Glastechnische Berichte
,
66
(
1993
) No.
3
, pp.
61
67
4.
Horst
Exner
,
Bernd
Keiper
,
Peter
Meja
. Microstructuring of materials by pulsed laser focusing and projection technique. Presented at Photonics West ’99, 23.-29.
January
1999,
San Jose
,
California
, published in “
Laser Applications in Microelectronic and Optoelectronic Manufacturing IV
“ ed. by
Jan J.
Dubowski
,
H.
Helvajian
,
E. W.
Kreutz
,
K.
Sugioka
, SPIE Proceedings Series, Volume
3618
, (
1999
)
340
347
.
This content is only available via PDF.
You do not currently have access to this content.