Volumes | LIA Conference Proceedings

Skip Nav Destination

ICALEO® 2006: 25th International Congress on Laser Materials Processing and Laser Microfabrication

LASER MATERIALS PROCESSING MANUSCRIPTS

Laser Cladding

Effect of increment and single-track geometry on the formation of multi-track laser cladding

Shoujin Sun; Milan Brandt; James Harris; Yvonne Durandet

LIACP 2010; 104-109https://doi.org/10.2351/1.5056908

Abstract

View Articletitled, Effect of increment and single-track geometry on the formation of multi-track laser cladding

PDF

Residual stresses in Al7075 alloy plate laser clad with Al-12Si alloy powder

Y. Durandet; R. Deam; P. Bendeich; M. Ripley; M. Brandt; Qianchu Liu; P. Baburamani

LIACP 2010; 110-115https://doi.org/10.2351/1.5056910

Abstract

View Articletitled, Residual stresses in Al7075 alloy plate laser clad with Al-12Si alloy powder

PDF

Study of melting characteristics of wire in laser cladding process

Nazmul Alam; Laurie Jarvis

LIACP 2010; 116-121https://doi.org/10.2351/1.5056911

Abstract

View Articletitled, Study of melting characteristics of wire in laser cladding process

PDF

Microstructural features and cracking of laser cladding on 7xxx aluminium alloys with Al-12%Si powder

Qianchu Liu; Milan Brandt; Yvonne Durandet

LIACP 2010; 122-127https://doi.org/10.2351/1.5056912

Abstract

View Articletitled, Microstructural features and cracking of laser cladding on 7xxx aluminium alloys with Al-12%Si powder

PDF

Laser cladding repair of LP steam turbine blades

James Harris; Brian Dempster; Shojin Sun; Milan Brandt

LIACP 2010; 86-91https://doi.org/10.2351/1.5056982

Abstract

View Articletitled, Laser cladding repair of LP steam turbine blades

PDF

Laser cladding and laser-induced foaming of titanium for biomedical applications

G. Hohenhoff; H. Haferkamp; A. Ostendorf; O. Meier; S. Czerner; C. Hurschler; S. Ostermeier; C. Stukenborg-Colsman

LIACP 2010; 92-97https://doi.org/10.2351/1.5056983

Abstract

View Articletitled, Laser cladding and laser-induced foaming of titanium for biomedical applications

PDF

Continuous wave Nd:YAG laser cladding of stellite 6 multi-track layers on mild and AISI 4016 steel

M. Franklin; S. W. Huang; M. Brandt; T. Chandra; A. K. Tieu

LIACP 2010; 98-103https://doi.org/10.2351/1.5056984

Abstract

View Articletitled, Continuous wave Nd:YAG laser cladding of stellite 6 multi-track layers on mild and AISI 4016 steel

PDF

Modelling and Beam Interaction

Basic understanding on beam - Plasma interaction in laser welding

Akira Matsunawa; Jong-Do Kim

LIACP 2010; 128-133https://doi.org/10.2351/1.5056913

Abstract

View Articletitled, Basic understanding on beam - Plasma interaction in laser welding

PDF

Convection of energy in partially ionised vapour in laser keyhole welding

John Dowden

LIACP 2010; 134-139https://doi.org/10.2351/1.5056914

Abstract

View Articletitled, Convection of energy in partially ionised vapour in laser keyhole welding

PDF

The reflectance of steels and non-ferrous alloys to Nd:YAG and Nd:YLF laser light

David Bergström; John Powell; Alexander Kaplan

LIACP 2010; 140-145https://doi.org/10.2351/1.5056915

Abstract

View Articletitled, The reflectance of steels and non-ferrous alloys to Nd:YAG and Nd:YLF laser light

PDF

The role of analytic heat flow models in laser processing

R. T. Deam; Y. Durandet; C. H. J. Johnson

LIACP 2010; 146-150https://doi.org/10.2351/1.5056916

Abstract

View Articletitled, The role of analytic heat flow models in laser processing

PDF

Hybrid Welding

Hybrid laser-arc processing

W. M. Steen

LIACP 2010; 151-156https://doi.org/10.2351/1.5056917

Abstract

View Articletitled, Hybrid laser-arc processing

PDF

The influence of high power diode laser in hybrid laser-controlled dip transfer GMA welding

Justino Mulima; Marcel Hermans; John Norrish; Paul Di Pietro

LIACP 2010; 174-179https://doi.org/10.2351/1.5056921

Abstract

View Articletitled, The influence of high power diode laser in hybrid laser-controlled dip transfer GMA welding

PDF

Flux free joining of zinc coated steel as well as steel/aluminum through laser and controlled short arc technology

Johannes Wilden; Jean Pierre Bergmann; Markus Dolles; Sebastian Reich; Sven-F. Goecke

LIACP 2010; 180-185https://doi.org/10.2351/1.5056922

Abstract

View Articletitled, Flux free joining of zinc coated steel as well as steel/aluminum through laser and controlled short arc technology

PDF

Laser Systems

Diode pumped 560mJ 400Hz 10ns all-solid-state green MOPA system

Chun Tang; Qingsong Gao; Lixin Tong; Zhen Cai; Xiaolin Chen; Deyong Wu; Bin Wei; Bo Tu; Kai Zhang

LIACP 2010; 186-188https://doi.org/10.2351/1.5056923

Abstract

View Articletitled, Diode pumped 560mJ 400Hz 10ns all-solid-state green MOPA system

PDF

Laser Metal Deposition

Direct metal deposition: Environmentally friendly enabling technology

J. Mazumder; W. R. Morrow; H. Qi; S. J. Skerlos; B. Dutta

LIACP 2010; 189-195https://doi.org/10.2351/1.5056924

Abstract

View Articletitled, Direct metal deposition: Environmentally friendly enabling technology

PDF

Laser near net shape manufacturing for nickel alloy parts with complex structure

Xiaoping Huang; Yanmin Li; Yong Liu; Henry Peng; Magdi Azer

LIACP 2010; 196-200https://doi.org/10.2351/1.5056926

Abstract

View Articletitled, Laser near net shape manufacturing for nickel alloy parts with complex structure

PDF

Reconditioning of nickel base HPT blades and vanes used in aero engines and power plant gas turbines by combination of direct laser forming, laser metal deposition and laser drilling

Ingomar Kelbassa; Ernst Wolfgang Kreutz; Christoph Over; Lena Trippe; Konrad Wissenbach

LIACP 2010; 201-207https://doi.org/10.2351/1.5056928

Abstract

View Articletitled, Reconditioning of nickel base HPT blades and vanes used in aero engines and power plant gas turbines by combination of direct laser forming, laser metal deposition and laser drilling

PDF

Laser metal deposition of tial alloys

I. Kelbassa; A. Weisheit; K. Wissenbach; V. Hermes

LIACP 2010; 208-212https://doi.org/10.2351/1.5056929

Abstract

View Articletitled, Laser metal deposition of tial alloys

PDF

Development of 3D SFF system using a new selective dual-laser sintering process

Dong Soo Kim; Young Jin Ahn; Chung Hwan Kim; Byung Oh Choi; Kyung Hyun Choi

LIACP 2010; 213-218https://doi.org/10.2351/1.5056930

Abstract

View Articletitled, Development of 3D SFF system using a new selective dual-laser sintering process

PDF

Laser Surfacing and Machining

Non-conventional laser beam geometries for laser transformation hardening of mild steels

Shakeel Safdar; Lin Li; M. A. Sheikh; Zhu Liu

LIACP 2010; 219-224https://doi.org/10.2351/1.5056931

Abstract

View Articletitled, Non-conventional laser beam geometries for laser transformation hardening of mild steels

PDF

Integrated heat treatment – System for precise hardening of unique tools or parts

Steffen Bonss; Jan Hannweber; Udo Karsunke; Marko Seifert; Berndt Brenner; Eckhard Beyer

LIACP 2010; 225-230https://doi.org/10.2351/1.5056932

Abstract

View Articletitled, Integrated heat treatment – System for precise hardening of unique tools or parts

PDF

Micro hardening of carbon steels with an elliptical beam of direct diode laser

Junji Morimoto; Shinji Fukuhara; Yutaka Katoh; Nobuyuki Abe; Masahiro Tsukamoto; Shigeru Tanaka

LIACP 2010; 231-234https://doi.org/10.2351/1.5056933

Abstract

View Articletitled, Micro hardening of carbon steels with an elliptical beam of direct diode laser

PDF

Improving polymer surfaces using laser dispersion of ceramic micro and nanoparticles

M. Hustedt; S. Barcikowski; A. von Busse; H. Haferkamp; A. Ostendorf

LIACP 2010; 235-240https://doi.org/10.2351/1.5056934

Abstract

View Articletitled, Improving polymer surfaces using laser dispersion of ceramic micro and nanoparticles

PDF

Comparison of the structures of the hot-work tool steels laser modified gradient layers

M. Bonek; L. A. Dobrzański

LIACP 2010; 241-245https://doi.org/10.2351/1.5056935

Abstract

View Articletitled, Comparison of the structures of the hot-work tool steels laser modified gradient layers

PDF

Surface laser alloying with ceramic powders of the X40CrMoV5-1 tool steel

Leszek A. Dobrzański; Ewa Jonda; Adam Polok

LIACP 2010; 246-249https://doi.org/10.2351/1.5056936

Abstract

View Articletitled, Surface laser alloying with ceramic powders of the X40CrMoV5-1 tool steel

PDF

Use of electromagnetic induced forces for active forming of coating geometry

Johannes Wilden; Jean Pierre Bergmann; Markus Dolles

LIACP 2010; 250-255https://doi.org/10.2351/1.5056937

Abstract

View Articletitled, Use of electromagnetic induced forces for active forming of coating geometry

PDF

Sensing and Control

High-speed and camera based temperature measurement and control for high power laser scanning systems

Marko Seifert; Steffen Bonss; Stefan Kühn; Berndt Brenner; Eckhard Beyer

LIACP 2010; 256-261https://doi.org/10.2351/1.5056938

Abstract

View Articletitled, High-speed and camera based temperature measurement and control for high power laser scanning systems

PDF

In-process monitoring during laser beam welding

J. Müller-Borhanian; C. Deininger; F. Dausinger

LIACP 2010; 262-266https://doi.org/10.2351/1.5056939

Abstract

View Articletitled, In-process monitoring during laser beam welding

PDF

Camera based system for laser beam online monitoring

Jan Hannweber; Stefan Kühn; Steffen Bonss; Berndt Brenner; Beyer Eckhard

LIACP 2010; 267-270https://doi.org/10.2351/1.5056940

Abstract

View Articletitled, Camera based system for laser beam online monitoring

PDF

Use of electromagnetic induced forces for active forming of coating geometry

Johannes Wilden; Jean Pierre Bergmann; Markus Dolles

LIACP 2010; 271-276https://doi.org/10.2351/1.5056941

Abstract

View Articletitled, Use of electromagnetic induced forces for active forming of coating geometry

PDF

Laser Cutting Drilling and Cleaning

Study of the interplay of vaporisation, melt displacement and melt ejection mechanisms under single and multiple pulse irradiation

J. M. Fishburn; M. J. Withford; D. W. Coutts; J. A. Piper

LIACP 2010; 277-280https://doi.org/10.2351/1.5056942

Abstract

View Articletitled, Study of the interplay of vaporisation, melt displacement and melt ejection mechanisms under single and multiple pulse irradiation

PDF

High precision laser drilling with ultra short pulses – Fundamental aspects and technical applications

Christian Föhl; Friedrich Dausinger

LIACP 2010; 281-286https://doi.org/10.2351/1.5056944

Abstract

View Articletitled, High precision laser drilling with ultra short pulses – Fundamental aspects and technical applications

PDF

Laser cutting and joining of wooden materials: How both processes are determined by the heat affected zone

S. Barcikowski; A. Ostendorf

LIACP 2010; 287-292https://doi.org/10.2351/1.5056945

Abstract

View Articletitled, Laser cutting and joining of wooden materials: How both processes are determined by the heat affected zone

PDF

Laser cutting ceramics using the unstable fracture technique

Chwan-Huei Tsai; Jian-Shiun Shiu

LIACP 2010; 293-298https://doi.org/10.2351/1.5056946

Abstract

View Articletitled, Laser cutting ceramics using the unstable fracture technique

PDF

Comparison of front and back laser irradiation in laser cleaning of silica particles from silica glass

Adam M. Joyce; Deborah M. Kane

LIACP 2010; 299-304https://doi.org/10.2351/1.5056947

Abstract

View Articletitled, Comparison of front and back laser irradiation in laser cleaning of silica particles from silica glass

PDF

Cleaning oxides from copper artifacts using a frequency-doubled Nd:YAG laser

Alexander Kaplan; Göran Åberg; Johnny Grahn; Yang Sook Koh; John Powell

LIACP 2010; 305-310https://doi.org/10.2351/1.5056948

Abstract

View Articletitled, Cleaning oxides from copper artifacts using a frequency-doubled Nd:YAG laser

PDF

Laser Welding

Application potential of laser with strong focusability

Jan Weberpals; Christoph Deininger; Friedrich Dausinger

LIACP 2010; 27-31https://doi.org/10.2351/1.5056943

Abstract

View Articletitled, Application potential of laser with strong focusability

PDF

New considerations and experimental results on laser lap welding of zinc coated steel sheets

M. M. S. Gualini; A. ur-Rehman; A. K. Shakeel; R. Akhtar; F. Grassi

LIACP 2010; 32-37https://doi.org/10.2351/1.5056953

Abstract

View Articletitled, New considerations and experimental results on laser lap welding of zinc coated steel sheets

PDF

Laser welding with or without shielding gas?

Mark Faerber; Wolfgang Danzer; Joachim Berkmanns

LIACP 2010; 38-41https://doi.org/10.2351/1.5056968

Abstract

View Articletitled, Laser welding with or without shielding gas?

PDF

Laser joining of aluminum to titanium with focus on aeronautical applications

Florian Wagner; Michael Kreimeyer; Rainer Kocik; Frank Vollertsen

LIACP 2010; 42-47https://doi.org/10.2351/1.5056973

Abstract

View Articletitled, Laser joining of aluminum to titanium with focus on aeronautical applications

PDF

Enhancement of weld seam quality by appropriate laser beam guiding for contour welding of thermoplastics

Mireia Fargas; Alexander von Busse; Jens Bunte; Oliver Meier

LIACP 2010; 48-53https://doi.org/10.2351/1.5056974

Abstract

View Articletitled, Enhancement of weld seam quality by appropriate laser beam guiding for contour welding of thermoplastics

PDF

Transmission laser welding of polymers using laser additives

Simon Doe; Peter Roberts

LIACP 2010; 54-59https://doi.org/10.2351/1.5056975

Abstract

View Articletitled, Transmission laser welding of polymers using laser additives

PDF

Comparison of linear and spinning laser beam technologies for welding of thermoplastics to timber

Björn Kretschmer; Milan Brandt; Stephan Barcikowski; James Harris; Dirk Herzog; Andreas Ostendorf

LIACP 2010; 60-64https://doi.org/10.2351/1.5056976

Abstract

View Articletitled, Comparison of linear and spinning laser beam technologies for welding of thermoplastics to timber

PDF

Laser Welding Properties and Expert Systems

Analysis and digitalization of expert’s skills for laser welding using analytic hierarchy process (AHP)

Shingo Hirose; Naoki Seto; Kazuo Mori

LIACP 2010; 65-70https://doi.org/10.2351/1.5056977

Abstract

View Articletitled, Analysis and digitalization of expert’s skills for laser welding using analytic hierarchy process (AHP)

PDF

Effect of laser welding parameters on welding defects analyzed by the analytic hierarchy process

Naoki Seto; Shingo Hirose; Kazuo Mori

LIACP 2010; 71-74https://doi.org/10.2351/1.5056978

Abstract

View Articletitled, Effect of laser welding parameters on welding defects analyzed by the analytic hierarchy process

PDF

Effects of strain rate on the properties of laser welded high pressure die cast AM50 and AM60 alloys

Y. Durandet; W. Song; M. Brandt; J. Harris

LIACP 2010; 75-80https://doi.org/10.2351/1.5056979

Abstract

View Articletitled, Effects of strain rate on the properties of laser welded high pressure die cast AM50 and AM60 alloys

PDF

The effects of laser process parameters on the weldability of lap joints between aluminum alloy (AA5052) and magnesium alloy (AZ31B)

Young-Pyo Kim; Nazmul Alam; Han-Sur Bang

LIACP 2010; 81-85https://doi.org/10.2351/1.5056981

Abstract

View Articletitled, The effects of laser process parameters on the weldability of lap joints between aluminum alloy (AA5052) and magnesium alloy (AZ31B)

PDF

PLENARY SESSION MANUSCRIPTS

New Lasers and Applications

Holistic development of high power laser sources and corresponding applications

Reinhart Poprawe; Peter Loosen; Hans-Dieter Hoffmann; Dirk Petring; Konrad Wissenbach

LIACP 2010; 10-17https://doi.org/10.2351/1.5056909

Abstract

View Articletitled, Holistic development of high power laser sources and corresponding applications

PDF

Laser applications in additive manufacturing: Spanning microns to meters

James W. Sears

LIACP 2010; 18-26https://doi.org/10.2351/1.5056925

Abstract

View Articletitled, Laser applications in additive manufacturing: Spanning microns to meters

PDF

Lithography by maskless laser direct writing

Andreas Ostendorf; Juergen Koch; Frank Meyer; Boris N. Chichkov

LIACP 2010; 1-6https://doi.org/10.2351/1.5056927

Abstract

View Articletitled, Lithography by maskless laser direct writing

PDF

Femtosecond pulsed laser induced shape change of metallic nanoparticles and its application to optical data storage

James W. M. Chon; Craig Bullen; Min Gu

LIACP 2010; 7-9https://doi.org/10.2351/1.5056980

Abstract

View Articletitled, Femtosecond pulsed laser induced shape change of metallic nanoparticles and its application to optical data storage

PDF

MICRO NANO AND ULTRAFAST FABRICATION MANUSCRIPTS

Micromachining Applications

Fabrication of microchannels in PMMA by femtosecond laser pulses

Daniel Day; Min Gu

LIACP 2010; 311-316https://doi.org/10.2351/1.5056949

Abstract

View Articletitled, Fabrication of microchannels in PMMA by femtosecond laser pulses

PDF

Micro laser sintering (microls) for rapid prototyping of metal-ceramics

Stefan Czerner; Peter Stippler; Andreas Ostendorf; Paolo Matteazzi

LIACP 2010; 317-322https://doi.org/10.2351/1.5056950

Abstract

View Articletitled, Micro laser sintering (microls) for rapid prototyping of metal-ceramics

PDF

Micro joining of dissimilar metals with a pulsed Nd: YAG laser

Mohammed Naeem

LIACP 2010; 323-328https://doi.org/10.2351/1.5056951

Abstract

View Articletitled, Micro joining of dissimilar metals with a pulsed Nd: YAG laser

PDF

Laser replication process using photo-etchable glass-ceramics and polymers

Joohan Kim; Xianfan Xu

LIACP 2010; 329-333https://doi.org/10.2351/1.5056952

Abstract

View Articletitled, Laser replication process using photo-etchable glass-ceramics and polymers

PDF

A process study of laser micro-drilling vias for wafer-level chip scale packaging

H. Y. Zheng; D. K. Y. Low; X. C. Wang; G. C. Lim

LIACP 2010; 334-338https://doi.org/10.2351/1.5056954

Abstract

View Articletitled, A process study of laser micro-drilling vias for wafer-level chip scale packaging

PDF

Laser beam micro-welding with single mode fibre lasers

Florian Wagner

LIACP 2010; 339-343https://doi.org/10.2351/1.5056955

Abstract

View Articletitled, Laser beam micro-welding with single mode fibre lasers

PDF

Writing waveguide in photosensitive glass using ultrafast laser

Z. L. Li; D. K. Y. Low; K. J. Moh; S. Y. Chow; G. C. Lim

LIACP 2010; 344-346https://doi.org/10.2351/1.5056956

Abstract

View Articletitled, Writing waveguide in photosensitive glass using ultrafast laser

PDF

Femtosecond Applications

Topographical electrodes for poling lithium niobate

Benjamin Johnston; Michael Withford

LIACP 2010; 348-352https://doi.org/10.2351/1.5056957

Abstract

View Articletitled, Topographical electrodes for poling lithium niobate

PDF

Void generation and three-dimensional photonic crystal fabrication in a lithium niobate crystal by use of micro-explosion

Guangyong Zhou; Min Gu

LIACP 2010; 353-356https://doi.org/10.2351/1.5056958

Abstract

View Articletitled, Void generation and three-dimensional photonic crystal fabrication in a lithium niobate crystal by use of micro-explosion

PDF

Fibre Bragg grating fabrication in germanosilicate fibres with 244nm femtosecond laser light

A. Canagasabey; J. Canning; J. D. Mills; D. P Banks; M. Ibsen

LIACP 2010; 357-359https://doi.org/10.2351/1.5056959

Abstract

View Articletitled, Fibre Bragg grating fabrication in germanosilicate fibres with 244nm femtosecond laser light

PDF

Point by point femtosecond laser inscription of fibre and waveguide Bragg gratings for photonic device fabrication

Graham D. Marshall; Martin Ams; Michael J. Withford

LIACP 2010; 360-362https://doi.org/10.2351/1.5056960

Abstract

View Articletitled, Point by point femtosecond laser inscription of fibre and waveguide Bragg gratings for photonic device fabrication

PDF

Tilted fibre gratings for sideways light delivery

Judith M. Dawes; Graham D. Marshall; Michael J. Withford

LIACP 2010; 363-365https://doi.org/10.2351/1.5056961

Abstract

View Articletitled, Tilted fibre gratings for sideways light delivery

PDF

Chirped-pulse oscillators for micro- and nanomachining applications

A. Fuerbach; A. Isemann; A. Assion; A. Fernandez; R. Graf; A. Apolonski

LIACP 2010; 367-370https://doi.org/10.2351/1.5056962

Abstract

View Articletitled, Chirped-pulse oscillators for micro- and nanomachining applications

PDF

Optical Devices

Fabrication of c-band resonant structures in rib waveguides

Andrew J. Lee; Michael J. Withford; Judith M. Dawes; Graham D. Marshall

LIACP 2010; 371-374https://doi.org/10.2351/1.5056963

Abstract

View Articletitled, Fabrication of c-band resonant structures in rib waveguides

PDF

Active devices fabricated in bulk glass via femtosecond laser pulses

Martin Ams; Graham D. Marshall; James A. Piper; Michael J. Withford

LIACP 2010; 375-377https://doi.org/10.2351/1.5056964

Abstract

View Articletitled, Active devices fabricated in bulk glass via femtosecond laser pulses

PDF

Nano imprinting of polymer planar waveguide bragg gratings

V. Sivan; L. Bui; G. Kostovski; P. Wilksch; T. Priest; A. Holland; A. Mitchell

LIACP 2010; 378-382https://doi.org/10.2351/1.5056965

Abstract

View Articletitled, Nano imprinting of polymer planar waveguide bragg gratings

PDF

Fabrication of periodic, resonant features in optical fibres using a CO₂ laser micro-tapering system

Douglas J. Little; Graham D. Marshall; Michael J. Withford

LIACP 2010; 383-386https://doi.org/10.2351/1.5056966

Abstract

View Articletitled, Fabrication of periodic, resonant features in optical fibres using a CO2 laser micro-tapering system

PDF

Superprism phenomena in 3D photonic crystals fabricated by two-photon polymerisation

J. Serbin; M. Gu

LIACP 2010; 388-391https://doi.org/10.2351/1.5056967

Abstract

View Articletitled, Superprism phenomena in 3D photonic crystals fabricated by two-photon polymerisation

PDF

Nanostructured ZnO thin films prepared by pulsed-laser deposition

Peng Li; Henry Peng

LIACP 2010; 392-395https://doi.org/10.2351/1.5056969

Abstract

View Articletitled, Nanostructured ZnO thin films prepared by pulsed-laser deposition

PDF

Processes and Techniques

A user-friendly simulation tool to facilitate writing of complex part programs for laser micromachining

R. G. Hume; J. P. Hayes; P. G. Iovenitti

LIACP 2010; 396-399https://doi.org/10.2351/1.5056970

Abstract

View Articletitled, A user-friendly simulation tool to facilitate writing of complex part programs for laser micromachining

PDF

Micro joining and cutting with a single mode fiber laser

Mohammed Naeem; Steffan Lewis

LIACP 2010; 400-405https://doi.org/10.2351/1.5056971

Abstract

View Articletitled, Micro joining and cutting with a single mode fiber laser

PDF

Optical surface profilometry of low reflectance materials – Evaluation as a laser processing diagnostic

Adam M. Joyce; Deborah M. Kane; Richard J. Chater

LIACP 2010; 406-410https://doi.org/10.2351/1.5056972

Abstract

View Articletitled, Optical surface profilometry of low reflectance materials – Evaluation as a laser processing diagnostic

PDF

LASER MATERIALS PROCESSING CONFERENCE MANUSCRIPTS

Fundamentals of Laser Welding

Analysis of basic processes inside the keyhole during deep penetration Nd-YAG cw laser welding

Rémy Fabbro; Sonia Slimani; Frédéric Coste; Francis Briand; Bruno Dlubak; Guillaume Loisel

LIACP 2010; 101https://doi.org/10.2351/1.5060748

Abstract

View Articletitled, Analysis of basic processes inside the keyhole during deep penetration Nd-YAG cw laser welding

PDF

Holographic diffractive optical elements allow improvements in conduction laser welding of steels

James Kell; John Tyrer; Rebecca Higginson; Rachel Thomson; John Jones; Sara Noden

LIACP 2010; 102https://doi.org/10.2351/1.5060749

Abstract

View Articletitled, Holographic diffractive optical elements allow improvements in conduction laser welding of steels

PDF

The effect of welding parameters on keyhole behavior in CO₂-laser welding

Antti Salminen; Anna Fellman

LIACP 2010; 103https://doi.org/10.2351/1.5060750

Abstract

View Articletitled, The effect of welding parameters on keyhole behavior in CO2-laser welding

PDF

Effect of alloying elements on porosity formation in laser welding of heavy section steel plates

Susumu Tsukamoto; Goro Arakane; Kazuhiro Kojima; Tadayuki Otani; Shigeru Ohkita

LIACP 2010; 104https://doi.org/10.2351/1.5060751

Abstract

View Articletitled, Effect of alloying elements on porosity formation in laser welding of heavy section steel plates

PDF

Avoiding hot cracking by induction based change of thermal strains during laser welding

Gunther Göbel; Berndt Brenner

LIACP 2010; 105https://doi.org/10.2351/1.5060752

Abstract

View Articletitled, Avoiding hot cracking by induction based change of thermal strains during laser welding

PDF

Which laser process for steel to aluminium joining?

Guillaume Sierra; Patrice Peyre; Frédéric Deschaux-Beaume; David Stuart; Cyril Bordreuil; Gilles Fras

LIACP 2010; 106https://doi.org/10.2351/1.5060753

Abstract

View Articletitled, Which laser process for steel to aluminium joining?

PDF

Laser joining of steel-aluminum joints in T configuration

J. van Tienhoven; B. Pathiraj; J. Meijer

LIACP 2010; 107https://doi.org/10.2351/1.5060754

Abstract

View Articletitled, Laser joining of steel-aluminum joints in T configuration

PDF

Experimental study of magnesium and aluminium alloys absorption and keyhole evolution during laser interaction Nd:YAG interaction

Nicolas Pierron; Pierre Sallamand; Simone Matteï

LIACP 2010; P536https://doi.org/10.2351/1.5060944

Abstract

View Articletitled, Experimental study of magnesium and aluminium alloys absorption and keyhole evolution during laser interaction Nd:YAG interaction

PDF

Fibre coupled diode laser welding of lead alloy

Caroline Décombard; Olivier Amiot; Jacqueline Clémencelle; Christophe De Boyer D’Eguilles; Yvan Brunelliere

LIACP 2010; P537https://doi.org/10.2351/1.5060945

Abstract

View Articletitled, Fibre coupled diode laser welding of lead alloy

PDF

Laser Cladding for Tooling & Moulds & Laser Assisted Deposition

Hard, wear resistant metal surfaces for industrial applications through laser powder deposition

James Sears; Aaron Costello; Jerrod Roalstad; Sudip Bhattacharya; Stanley Howard

LIACP 2010; 201https://doi.org/10.2351/1.5060808

Abstract

View Articletitled, Hard, wear resistant metal surfaces for industrial applications through laser powder deposition

PDF

Laser deposition of stainless and tool steel on a copper-beryllium alloy for plastic injection mould improvement

José Greses; Jesús M. Sampedro; Vicente Climent; José A. Ramos-de-Campos

LIACP 2010; 202https://doi.org/10.2351/1.5060809

Abstract

View Articletitled, Laser deposition of stainless and tool steel on a copper-beryllium alloy for plastic injection mould improvement

PDF

Defining coating material for aluminum die casting molds using a laser cladding process

Jaby Mohammed; Suraj M. Alexander

LIACP 2010; 203https://doi.org/10.2351/1.5060810

Abstract

View Articletitled, Defining coating material for aluminum die casting molds using a laser cladding process

PDF

Advances in 3D laser processing in mold technology

Henrikki Pantsar; Reino Ruusu; Petri Laakso; Anssi Jansson

LIACP 2010; 204https://doi.org/10.2351/1.5060811

Abstract

View Articletitled, Advances in 3D laser processing in mold technology

PDF

Repair of cemented carbide tools using laser cladding

Christ P. Paul; Hamidreza Alemohammad; Ehsan Toyserkani; Amir Khajepour; Stephen Corbin

LIACP 2010; 205https://doi.org/10.2351/1.5060812

Abstract

View Articletitled, Repair of cemented carbide tools using laser cladding

PDF

Development of a laser assisted material spray process

Matthew Bray; Steven Celotto; William O’Neill

LIACP 2010; 206https://doi.org/10.2351/1.5060813

Abstract

View Articletitled, Development of a laser assisted material spray process

PDF

Laser Processing in the Aerospace, Defence & Space Industries

Microstructure and mechanical properties of laser net shape manufactured inconel 718 and Ti-6Al-4V components

Yong Liu; Xiaoping Huang; Yanmin Li; Henry Peng; Huan Qi; Magdi Azer

LIACP 2010; 301https://doi.org/10.2351/1.5060814

Abstract

View Articletitled, Microstructure and mechanical properties of laser net shape manufactured inconel 718 and Ti-6Al-4V components

PDF

Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology

Andrew J. Pinkerton; Richard Moat; Lin Li; Michael Preuss; Philip Withers

LIACP 2010; 302https://doi.org/10.2351/1.5060815

Abstract

View Articletitled, Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology

PDF

Results on laser direct manufacturing of graded materials

Patrice Peyre; Pascal Aubry; Chedly Braham; Rémy Fabbro

LIACP 2010; 303https://doi.org/10.2351/1.5060816

Abstract

View Articletitled, Results on laser direct manufacturing of graded materials

PDF

Study of porosity formation during laser welding of Ti6Al4V

Steffen Mueller; Eric Stiles; Ralph Dienemann

LIACP 2010; 304https://doi.org/10.2351/1.5060817

Abstract

View Articletitled, Study of porosity formation during laser welding of Ti6Al4V

PDF

Repair opportunities for aerospace components through laser powder deposition

Aaron Costello; James Sears

LIACP 2010; 305https://doi.org/10.2351/1.5060818

Abstract

View Articletitled, Repair opportunities for aerospace components through laser powder deposition

PDF

Beneficial pre-stress in laser fabricated, metallic, square cellular sandwich panels

Stephen Copley; Peter Vigna; Eduard Ventsel

LIACP 2010; 306https://doi.org/10.2351/1.5060819

Abstract

View Articletitled, Beneficial pre-stress in laser fabricated, metallic, square cellular sandwich panels

PDF

Laser percussion drilling of aerospace material using high peak power fiber delivered lamp-pumped pulsed Nd: YAG laser

Mohammed Naeem

LIACP 2010; 308https://doi.org/10.2351/1.5060820

Abstract

View Articletitled, Laser percussion drilling of aerospace material using high peak power fiber delivered lamp-pumped pulsed Nd: YAG laser

PDF

Drilling routine for estimating, analyzing and modeling of laser processing

Tom Eppes; Ivana M. Milanovic; Devdas Shetty; Jason Bornas

LIACP 2010; 309https://doi.org/10.2351/1.5060821

Abstract

View Articletitled, Drilling routine for estimating, analyzing and modeling of laser processing

PDF

Investigation into the influence of pulse shaping on drilling efficiency

P. W. French; M. Naeem; M. Sharp; K. G. Watkins

LIACP 2010; 310https://doi.org/10.2351/1.5060822

Abstract

View Articletitled, Investigation into the influence of pulse shaping on drilling efficiency

PDF

Laser-processing of turbine components advances in part-programming strategies

John Stackhouse; David Suttie

LIACP 2010; 311https://doi.org/10.2351/1.5060823

Abstract

View Articletitled, Laser-processing of turbine components advances in part-programming strategies

PDF

Financing strategies used by small and mid-sized firms using laser manufacturing technology to supply the aerospace industry

Susan Coleman; Devdas Shetty; Tom Eppes

LIACP 2010; P520https://doi.org/10.2351/1.5060932

Abstract

View Articletitled, Financing strategies used by small and mid-sized firms using laser manufacturing technology to supply the aerospace industry

PDF

Laser Cutting

An evaluation of the cutting potential of different types of high power lasers

Flemming Olsen

LIACP 2010; 401https://doi.org/10.2351/1.5060824

Abstract

View Articletitled, An evaluation of the cutting potential of different types of high power lasers

PDF

Inert cutting of medium section stainless steel using a 2.2kW high brightness fibre laser

Martin Sparkes; Markus Gross; Steven Celotto; Tao Zhang; William O’Neill

LIACP 2010; 402https://doi.org/10.2351/1.5060825

Abstract

View Articletitled, Inert cutting of medium section stainless steel using a 2.2kW high brightness fibre laser

PDF

Melt flow in narrow thick section kerfs

Markus S. Gross; Steven Celotto; William O’Neill

LIACP 2010; 403https://doi.org/10.2351/1.5060826

Abstract

View Articletitled, Melt flow in narrow thick section kerfs

PDF

Cutting of stainless steel with fiber and disk laser

Catherine Wandera; Antti Salminen; Flemming O. Olsen; Veli Kujanpää

LIACP 2010; 404https://doi.org/10.2351/1.5060827

Abstract

View Articletitled, Cutting of stainless steel with fiber and disk laser

PDF

A new approach to 3D laser cutting

Jochen Deile; Greg LaManna; Michael Fritz; Axel Fischer

LIACP 2010; 405https://doi.org/10.2351/1.5060828

Abstract

View Articletitled, A new approach to 3D laser cutting

PDF

Laser cutting of 2024-T3 aeronautic aluminium alloy

A. Riveiro; J. Pou; F. Lusquiños; M. Boutinguiza; F. Quintero; R. Soto; R. Comesaña; M. Pérez-Amor

LIACP 2010; 406https://doi.org/10.2351/1.5060829

Abstract

View Articletitled, Laser cutting of 2024-T3 aeronautic aluminium alloy

PDF

Investigation of laser cutting quality of aluminium

Aristidis Stournaras; Panagiotis Stavropoulos; George Chryssolouris

LIACP 2010; 407https://doi.org/10.2351/1.5060830

Abstract

View Articletitled, Investigation of laser cutting quality of aluminium

PDF

Laser cutting of variable thickness materials - Understanding the problem

M. Sobih; P. L. Crouse; L. Li

LIACP 2010; 408https://doi.org/10.2351/1.5060831

Abstract

View Articletitled, Laser cutting of variable thickness materials - Understanding the problem

PDF

Multifunctional hand-held laser processing device

Christian Hennigs; Oliver Meier; Andreas Ostendorf; Heinz Haferkamp

LIACP 2010; 410https://doi.org/10.2351/1.5060832

Abstract

View Articletitled, Multifunctional hand-held laser processing device

PDF

Laser cutting of mineral pigment coated papers

Heidi Malmberg; Antti Salminen; Veli Kujanpää

LIACP 2010; P510https://doi.org/10.2351/1.5060924

Abstract

View Articletitled, Laser cutting of mineral pigment coated papers

PDF

On the fly cutting of silicon ribbon

Rob Janoch

LIACP 2010; P533https://doi.org/10.2351/1.5060943

Abstract

View Articletitled, On the fly cutting of silicon ribbon

PDF

Laser cutting of natural stone slabs

A. Riveiro; M. Boutinguiza; R. Soto; F. Lusquiños; F. Quintero; J. Pou; M. Pérez-Amor

LIACP 2010; P544https://doi.org/10.2351/1.5060948

Abstract

View Articletitled, Laser cutting of natural stone slabs

PDF

Laser Processing in the Automotive Sector

Fault-tolerant laser welding in automotive industries

Michael Schmidt; Andreas Otto; Alexander Grimm; Christian Kägeler

LIACP 2010; 501https://doi.org/10.2351/1.5060833

Abstract

View Articletitled, Fault-tolerant laser welding in automotive industries

PDF

Effect of processing parameters on zero-gap laser welds made on multi-coated steel

Ashish Dasgupta; Jyoti Mazumder

LIACP 2010; 502https://doi.org/10.2351/1.5060834

Abstract

View Articletitled, Effect of processing parameters on zero-gap laser welds made on multi-coated steel

PDF

Nd:YAG laser welding of AZ31 sheet for car industry

Mok-Young Lee; Woong-Seong Chang; Byung-Hyun Yoon

LIACP 2010; 504https://doi.org/10.2351/1.5060835

Abstract

View Articletitled, Nd:YAG laser welding of AZ31 sheet for car industry

PDF

Laser roll welding of dissimilar metal joint of zinc coated steel and aluminum alloy

Hitoshi Ozaki; Muneharu Kutsuna

LIACP 2010; 505https://doi.org/10.2351/1.5060836

Abstract

View Articletitled, Laser roll welding of dissimilar metal joint of zinc coated steel and aluminum alloy

PDF

Induction assisted laser welding of advanced high strength steels to increase the formability of welded automotive body structures

Axel Jahn; Berndt Brenner; Eckhard Beyer

LIACP 2010; 1701https://doi.org/10.2351/1.5060784

Abstract

View Articletitled, Induction assisted laser welding of advanced high strength steels to increase the formability of welded automotive body structures

PDF

Laser beam brazing of steel-aluminium tailored hybrid blanks

Lars Engelbrecht; Oliver Meier; Andreas Ostendorf; Heinz Haferkamp

LIACP 2010; 1702https://doi.org/10.2351/1.5060785

Abstract

View Articletitled, Laser beam brazing of steel-aluminium tailored hybrid blanks

PDF

An experimental investigation of remote welding with CO₂ and Nd:YAG laser-based systems

George Tsoukantas; Aristidis Stournaras; George Chryssolouris

LIACP 2010; 1704https://doi.org/10.2351/1.5060786

Abstract

View Articletitled, An experimental investigation of remote welding with CO2 and Nd:YAG laser-based systems

PDF

Development of the laser spot welded stainless steel panel for vehicle body

Masashi Oikawa; Katsuhiro Minamida; Hiroyuki Kumehara

LIACP 2010; 1706https://doi.org/10.2351/1.5060787

Abstract

View Articletitled, Development of the laser spot welded stainless steel panel for vehicle body

PDF

Set of a high power diode laser in order to enhance wettability conditions and process speed in a controlled short arc brazing process of zinc coated steels

Johannes Wilden; Jean Pierre Bergmann; Sebastian Reich; Lars Möller; Sven-Frithjof Goecke

LIACP 2010; 1708https://doi.org/10.2351/1.5060788

Abstract

View Articletitled, Set of a high power diode laser in order to enhance wettability conditions and process speed in a controlled short arc brazing process of zinc coated steels

PDF

Laser brazing phenomena of galvanized steel and pit formation mechanism

Seita Kimura; Shinsuke Takemura; Masami Mizutani; Seiji Katayama

LIACP 2010; P528https://doi.org/10.2351/1.5060939

Abstract

View Articletitled, Laser brazing phenomena of galvanized steel and pit formation mechanism

PDF

Laser Welding of Polymers & Plastics

Through-transmission welding of polymers: Effects of particles on laser beam scattering

Mariana Ilie; Jean-Cristophe Kneip; Simone Mattei; Alexandru Nichici

LIACP 2010; 601https://doi.org/10.2351/1.5060837

Abstract

View Articletitled, Through-transmission welding of polymers: Effects of particles on laser beam scattering

PDF

Optimizing weld joint design for bond strength and functional properties in laser welding of polymers

R. E. Mueller; H. Gu

LIACP 2010; 602https://doi.org/10.2351/1.5060838

Abstract

View Articletitled, Optimizing weld joint design for bond strength and functional properties in laser welding of polymers

PDF

A novel CO₂ laser welding of plastics using a transparent solid heat sink without causing thermal damage

Yasuo Kurosaki; Tomoya Matayoshi; Kimitoshi Sato

LIACP 2010; 603https://doi.org/10.2351/1.5060839

Abstract

View Articletitled, A novel CO2 laser welding of plastics using a transparent solid heat sink without causing thermal damage

PDF

Development of direct laser joining for metal and plastic

Yousuke Kawahito; Akio Tange; Shyuji Kubota; Seiji Katayama

LIACP 2010; 604https://doi.org/10.2351/1.5060840

Abstract

View Articletitled, Development of direct laser joining for metal and plastic

PDF

Fiber laser pick-and-join tool for welding of thermoplastics

Andrei Boglea; Luedger Bosse; Alexander Olowinsky; Silvia Bou

LIACP 2010; 605https://doi.org/10.2351/1.5060841

Abstract

View Articletitled, Fiber laser pick-and-join tool for welding of thermoplastics

PDF

The use of overlapping Nd:YAG laser spot welds to butt weld steelite, a metal polymer laminate

H. L. Gower; R. R. G. M. Pieters; I. M. Richardson

LIACP 2010; P519https://doi.org/10.2351/1.5060931

Abstract

View Articletitled, The use of overlapping Nd:YAG laser spot welds to butt weld steelite, a metal polymer laminate

PDF

Process Monitoring & Control

Applicable sensor for a multivariate process controller

Simon Dietrich; Andreas Otto

LIACP 2010; 701https://doi.org/10.2351/1.5060842

Abstract

View Articletitled, Applicable sensor for a multivariate process controller

PDF

Optics evalutation for multikilowatt solid state and fiber lasers

Reinhard Kramer; Harald Schwede; Volker Brandl; Stefan Wolf; Otto Märten

LIACP 2010; 702https://doi.org/10.2351/1.5060843

Abstract

View Articletitled, Optics evalutation for multikilowatt solid state and fiber lasers

PDF

Improving the analysis of laser welding process by the reassigned time-frequency representations

Giuseppe D’Angelo; Giorgio Pasquettaz; Andrea Terreno

LIACP 2010; 703https://doi.org/10.2351/1.5060844

Abstract

View Articletitled, Improving the analysis of laser welding process by the reassigned time-frequency representations

PDF

Advanced process control in laser materials processing – Advantages in combining various sensor technologies

Markus Kogel-Hollacher; Jürgen Müller-Borhanian; Christoph Dietz; Thomas Nicolay; Axel Kattwinkel

LIACP 2010; 704https://doi.org/10.2351/1.5060845

Abstract

View Articletitled, Advanced process control in laser materials processing – Advantages in combining various sensor technologies

PDF

Using machine vision for observation of phenomena during laser hybrid welding

Anna Fellman; Henri Fennander; Antti Salminen; Ville Kyrki

LIACP 2010; 705https://doi.org/10.2351/1.5060846

Abstract

View Articletitled, Using machine vision for observation of phenomena during laser hybrid welding

PDF

Self guided laser welding

Boris Regaard; Stefan Kaierle; Reinhart Poprawe

LIACP 2010; 706https://doi.org/10.2351/1.5060847

Abstract

View Articletitled, Self guided laser welding

PDF

A novel non-intrusive technique for CO₂ laser on-line beam monitoring

Martin Sparkes; Markus Gross; William O’Neill

LIACP 2010; 1401https://doi.org/10.2351/1.5060766

Abstract

View Articletitled, A novel non-intrusive technique for CO2 laser on-line beam monitoring

PDF

Optical inspection of laser drilled cooling holes in jet engine blades

Devdas Shetty; Tom Eppes; Nikolay Nazaryan; Claudio Campana; Jun Kondo

LIACP 2010; 1402https://doi.org/10.2351/1.5060767

Abstract

View Articletitled, Optical inspection of laser drilled cooling holes in jet engine blades

PDF

Sensing and experimental based modeling of direct metal deposition

Lijun Song; Jyoti Mazumder

LIACP 2010; 1403https://doi.org/10.2351/1.5060768

Abstract

View Articletitled, Sensing and experimental based modeling of direct metal deposition

PDF

Camera based feedback control of the laser cladding process

J. T. Hofman; D. F. de Lange; J. Meijer

LIACP 2010; 1404https://doi.org/10.2351/1.5060769

Abstract

View Articletitled, Camera based feedback control of the laser cladding process

PDF

In situ evaluation of metallic coatings via laser plasma spectroscopy

Pamela Benicewicz; Pingfan Wu; Pavel Fomitchov; Bhupendra Gupta; Elena Rozier; John Viertl; Tymm Schumaker

LIACP 2010; 1405https://doi.org/10.2351/1.5060770

Abstract

View Articletitled, In situ evaluation of metallic coatings via laser plasma spectroscopy

PDF

The effect of parameter changes in CO₂ laser welding on spectra

Anna Fellman; Ville Heikkinen; Antti Salminen; Jouni Hiltunen; Birgitta Martinkauppi; Markku Hauta-Kasari

LIACP 2010; P502https://doi.org/10.2351/1.5060918

Abstract

View Articletitled, The effect of parameter changes in CO2 laser welding on spectra

PDF

Modelling of Laser Processes

Experimental verification of multi-physical modelling of the keyhole laser welding process

B. J. Aalderink; D. F. de Lange; R. G. K. M. Aarts; J. Meijer

LIACP 2010; 801https://doi.org/10.2351/1.5060848

Abstract

View Articletitled, Experimental verification of multi-physical modelling of the keyhole laser welding process

PDF

Interaction between laser beam, process effects and structural properties during welding using models based on the FEA

Loucas Papadakis; Tobias Hornfeck; Michael F. Zaeh

LIACP 2010; 802https://doi.org/10.2351/1.5060849

Abstract

View Articletitled, Interaction between laser beam, process effects and structural properties during welding using models based on the FEA

PDF

Three-dimensional finite element models for the calculation of temperature and residual stress fields in laser cladding

Augusto M. Deus; Jyoti Mazumder

LIACP 2010; 803https://doi.org/10.2351/1.5060850

Abstract

View Articletitled, Three-dimensional finite element models for the calculation of temperature and residual stress fields in laser cladding

PDF

An analytical model of the combined powder-wire deposition process

Andrew J. Pinkerton; Waheed Ul Haq Syed; Lin Li

LIACP 2010; 804https://doi.org/10.2351/1.5060851

Abstract

View Articletitled, An analytical model of the combined powder-wire deposition process

PDF

Experimental and computational investigation of fusion zone geometries during autogenous keyhole mode laser welds

R. Rai; S. M. Kelly; R. P. Martukanitz; T. DebRoy

LIACP 2010; 805https://doi.org/10.2351/1.5060852

Abstract

View Articletitled, Experimental and computational investigation of fusion zone geometries during autogenous keyhole mode laser welds

PDF

Theoretical and experimental investigation of pulsed laser grooving process

Aristidis Stournaras; Panagiotis Staropoulos; George Chryssolouris

LIACP 2010; 806https://doi.org/10.2351/1.5060853

Abstract

View Articletitled, Theoretical and experimental investigation of pulsed laser grooving process

PDF

Fibre Laser Processing

Phenomena of welding with high-power fiber laser

Keisuke Kinoshita; Masami Mizutani; Yousuke Kawahito; Seiji Katayama

LIACP 2010; 902https://doi.org/10.2351/1.5060854

Abstract

View Articletitled, Phenomena of welding with high-power fiber laser

PDF

Humping in welding with single-mode fiber lasers

Claus Thomy; Thomas Seefeld; Florian Wagner; Frank Vollertsen

LIACP 2010; 903https://doi.org/10.2351/1.5060855

Abstract

View Articletitled, Humping in welding with single-mode fiber lasers

PDF

The role of strong focusability on the welding process

Jan Weberpals; Friedrich Dausinger; Gunther Göbel; Berndt Brenner

LIACP 2010; 905https://doi.org/10.2351/1.5060856

Abstract

View Articletitled, The role of strong focusability on the welding process

PDF

Fiber laser welding of 780MPa high strength steel

Zhongjie Liu; Muneharu Kutsuna; Guojian Xu

LIACP 2010; 1101https://doi.org/10.2351/1.5060755

Abstract

View Articletitled, Fiber laser welding of 780MPa high strength steel

PDF

Optimization of parameters for effective welding of aerospace components

Adil Widaatalla; Devdas Shetty; Tom Eppes

LIACP 2010; 1104https://doi.org/10.2351/1.5060756

Abstract

View Articletitled, Optimization of parameters for effective welding of aerospace components

PDF

Applications review: Materials processing with fiber lasers under 1kW

Vijay Kancharla

LIACP 2010; 1301https://doi.org/10.2351/1.5060762

Abstract

View Articletitled, Applications review: Materials processing with fiber lasers under 1kW

PDF

High-speed fiber laser welding for fuel cell components

Stanley Ream

LIACP 2010; 1302https://doi.org/10.2351/1.5060763

Abstract

View Articletitled, High-speed fiber laser welding for fuel cell components

PDF

Integration of a flexible, pulsed high power single transverse mode Yb-doped fiber laser system

Tim Lauterborn; Stefan Heinemann; Almantas Galvanauskas

LIACP 2010; 1304https://doi.org/10.2351/1.5060764

Abstract

View Articletitled, Integration of a flexible, pulsed high power single transverse mode Yb-doped fiber laser system

PDF

High average power, low non-linearity Ytterbium fiber amplifier using spectral compression

Yoann Zaouter; Eric Cormier; Pierre Rigail; Clemens Hönninger; Eric Mottay

LIACP 2010; 1305https://doi.org/10.2351/1.5060765

Abstract

View Articletitled, High average power, low non-linearity Ytterbium fiber amplifier using spectral compression

PDF

Laser Cladding

Laser cladding of Cu-NbC nanocomposite coatings

Amélia Almeida; Sónia Eugénio; Vanessa Livramento; Maria Teresa Marques; José Brito Correia; Rui Vilar

LIACP 2010; 1001https://doi.org/10.2351/1.5060743

Abstract

View Articletitled, Laser cladding of Cu-NbC nanocomposite coatings

PDF

Laser cladding of multiple track composite NiCrBSi coatings

M. J. Tobar; J. M. Amado; J. C. Alvarez; A. Yañez

LIACP 2010; 1002https://doi.org/10.2351/1.5060744

Abstract

View Articletitled, Laser cladding of multiple track composite NiCrBSi coatings

PDF

Laser cladding in practice of valuable products; the experience of a laser cladding job shop

Wim Husslage

LIACP 2010; 1003https://doi.org/10.2351/1.5060745

Abstract

View Articletitled, Laser cladding in practice of valuable products; the experience of a laser cladding job shop

PDF

Improving laser cladding process conditions by inducing skin effect through high frequency magnetic field

Johannes Wilden; Jean-Pierre Bergmann; Markus Dolles

LIACP 2010; 1005https://doi.org/10.2351/1.5060746

Abstract

View Articletitled, Improving laser cladding process conditions by inducing skin effect through high frequency magnetic field

PDF

Comparison of laser cladding with powder and hot and cold wire techniques

Janne Nurminen; Jouko Riihimäki; Jonne Näkki; Petri Vuoristo

LIACP 2010; 1006https://doi.org/10.2351/1.5060747

Abstract

View Articletitled, Comparison of laser cladding with powder and hot and cold wire techniques

PDF

Crack behavior and characteristics of laser clad layer with powder mixture of C_O-based alloy and WC

Guojian Xu; Munaharu Kutsuna; Zhongjie Liu; Leiquan Sun

LIACP 2010; P509https://doi.org/10.2351/1.5060923

Abstract

View Articletitled, Crack behavior and characteristics of laser clad layer with powder mixture of CO-based alloy and WC

PDF

Development of laser cladding repair system for damaged alloy 600 heat exchanger tubes

Won-Jin Han; Woo-Sung Kim; Seon-Ho Lee

LIACP 2010; P522https://doi.org/10.2351/1.5060933

Abstract

View Articletitled, Development of laser cladding repair system for damaged alloy 600 heat exchanger tubes

PDF

Direct Metal Deposition

Mechanical performance of laser deposition repairing of in 738 on directionally solidified superalloy blade

Xiaofeng Zhu; Minlin Zhong; Wenjin Liu; Jinjiang He; Hongjun Zhang

LIACP 2010; 1202https://doi.org/10.2351/1.5060757

Abstract

View Articletitled, Mechanical performance of laser deposition repairing of in 738 on directionally solidified superalloy blade

PDF

Direct manufacturing of aeronautical components by laser metal deposition of Ti-6Ai-4V

Julie Maisonneuve; Christophe Colin; Yves Bienvenu; Pascal Aubry

LIACP 2010; 1203https://doi.org/10.2351/1.5060758

Abstract

View Articletitled, Direct manufacturing of aeronautical components by laser metal deposition of Ti-6Ai-4V

PDF

Absorption coefficient characterization in Ti-6Al-4V laser additive manufacturing

M. Keller; A. Chaudhary; S. Kelly; S. Medieros

LIACP 2010; 1204https://doi.org/10.2351/1.5060759

Abstract

View Articletitled, Absorption coefficient characterization in Ti-6Al-4V laser additive manufacturing

PDF

Qualification of Nd:YAG laser direct metal deposition techniques for repair of nickel superalloy components

A. A. Lugan; P. A. Hilton; G. B. Melton; C. Rinaldi

LIACP 2010; 1205https://doi.org/10.2351/1.5060760

Abstract

View Articletitled, Qualification of Nd:YAG laser direct metal deposition techniques for repair of nickel superalloy components

PDF

Laser consolidation of net-shape shells for flextensional sonar projectors

Lijue Xue; Chris Purcell

LIACP 2010; 1206https://doi.org/10.2351/1.5060761

Abstract

View Articletitled, Laser consolidation of net-shape shells for flextensional sonar projectors

PDF

Lasers in Bio-Medicine

Microstructure and mechanical properties of laser–deposited Ti–6Al–4V scaffold

Guru Prasad Dinda; Jyoti Mazumder; Lijun Song

LIACP 2010; 1501https://doi.org/10.2351/1.5060771

Abstract

View Articletitled, Microstructure and mechanical properties of laser–deposited Ti–6Al–4V scaffold

PDF

Production of biofibers by laser spinning

F. Quintero; J. Pou; F. Lusquiños; A. Riveiro; A. B. Mann

LIACP 2010; 1503https://doi.org/10.2351/1.5060772

Abstract

View Articletitled, Production of biofibers by laser spinning

PDF

Plasma spray hydroxyapatite coating on laser surface nitrided Ti6Al4V alloy

H. C. Man; Sen Yang; Xuebin Zheng

LIACP 2010; 1504https://doi.org/10.2351/1.5060773

Abstract

View Articletitled, Plasma spray hydroxyapatite coating on laser surface nitrided Ti6Al4V alloy

PDF

Laser-induced wettability characteristics modification and the effect thereof on cell response on a titanium alloy

J. Lawrence; L. Hao

LIACP 2010; 1505https://doi.org/10.2351/1.5060774

Abstract

View Articletitled, Laser-induced wettability characteristics modification and the effect thereof on cell response on a titanium alloy

PDF

CO₂ laser irradiation of a magnesia partially stabilized zirconia (MGO-PSZ) bioceramic and the subsequent improvements in human osteoblast cell adhesion

L. Hao; J. Lawrence

LIACP 2010; 1506https://doi.org/10.2351/1.5060775

Abstract

View Articletitled, CO2 laser irradiation of a magnesia partially stabilized zirconia (MGO-PSZ) bioceramic and the subsequent improvements in human osteoblast cell adhesion

PDF

3-D biomimetic micro-channel network by laser direct writing

Dong Hyuck Kam; Jyoti Mazumder

LIACP 2010; 1508https://doi.org/10.2351/1.5060776

Abstract

View Articletitled, 3-D biomimetic micro-channel network by laser direct writing

PDF

Laser surface modification of NiTi with Mo and Zr

K. W. Ng; H. C. Man; T. M. Yue

LIACP 2010; P540https://doi.org/10.2351/1.5060947

Abstract

View Articletitled, Laser surface modification of NiTi with Mo and Zr

PDF

Laser cladding from marine wastes for biomedical applications

F. Lusquiños; R. Comesaña; A. Riveiro; F. Quintero; J. Pou

LIACP 2010; P545https://doi.org/10.2351/1.5060949

Abstract

View Articletitled, Laser cladding from marine wastes for biomedical applications

PDF

Laser Surface Treatment

Optimisation of production rate in diode laser hardening

Edoardo Capello; Moreno Castelnuovo; Barbara Previtali

LIACP 2010; 1601https://doi.org/10.2351/1.5060777

Abstract

View Articletitled, Optimisation of production rate in diode laser hardening

PDF

Dual function laser surface treatment improves die casting die life

Zhiyue Xu; Claude B. Reed

LIACP 2010; 1602https://doi.org/10.2351/1.5060778

Abstract

View Articletitled, Dual function laser surface treatment improves die casting die life

PDF

Experimental analysis of laser stripping effects on thin composites

E. W. Reutzel; K. Knock; M. R. Wool; K. C. Meinert

LIACP 2010; 1603https://doi.org/10.2351/1.5060779

Abstract

View Articletitled, Experimental analysis of laser stripping effects on thin composites

PDF

Integrated heat treatment – Comparison of different machine concepts

Steffen Bonss; Jan Hannweber; Udo Karsunke; Marko Seifert; Berndt Brenner; Eckhard Beyer

LIACP 2010; 1604https://doi.org/10.2351/1.5060780

Abstract

View Articletitled, Integrated heat treatment – Comparison of different machine concepts

PDF

Empirical modelling of laser texturing of 304L stainless steel

A. Soveja; E. Cicală; G. Duffet; B. Martin; D. Grevey; J. M. Jouvard

LIACP 2010; 1605https://doi.org/10.2351/1.5060781

Abstract

View Articletitled, Empirical modelling of laser texturing of 304L stainless steel

PDF

Surface layer modification of AlSi6Cu4 aluminium alloy via CO₂ laser treatment

K. Bartkowiak; J. Borowski; A. Wołyński; L. Foltynowicz

LIACP 2010; 1606https://doi.org/10.2351/1.5060782

Abstract

View Articletitled, Surface layer modification of AlSi6Cu4 aluminium alloy via CO2 laser treatment

PDF

Study of the surface morphology and mechanical properties of yttria-stabilized zirconia (YSZ) thin films fabricated by pulsed laser deposition

Joonghan Shin; Peng Li; J. Mazumder

LIACP 2010; 1608https://doi.org/10.2351/1.5060783

Abstract

View Articletitled, Study of the surface morphology and mechanical properties of yttria-stabilized zirconia (YSZ) thin films fabricated by pulsed laser deposition

PDF

Laser bending of thin metal plate: Effects of two beams and single line beam on bending characteristics based on buckling mode

Toshiyuki Miyazaki; Tadashi Misu; Osamu Yamazaki; Masanobu Nagahama; Shunro Yoshioka; Tsuyoshi Tokunaga; Yoshihiro Tanaka

LIACP 2010; P501https://doi.org/10.2351/1.5060917

Abstract

View Articletitled, Laser bending of thin metal plate: Effects of two beams and single line beam on bending characteristics based on buckling mode

PDF

Laser peening systems for preventive maintenance against stress corrosion cracking in nuclear power reactors

Takuya Uehara; Naruhiko Mukai; Yuji Sano; Masaki Yoda; Itaru Chida; Hiromi Kato; Tetsuo Yamamoto

LIACP 2010; P503https://doi.org/10.2351/1.5060919

Abstract

View Articletitled, Laser peening systems for preventive maintenance against stress corrosion cracking in nuclear power reactors

PDF

Correction of distortion and design shape in aluminium structures using laser forming

G. Dearden; S. P. Edwardson; E. Abed; K. Bartkowiak; K. G. Watkins

LIACP 2010; P505https://doi.org/10.2351/1.5060920

Abstract

View Articletitled, Correction of distortion and design shape in aluminium structures using laser forming

PDF

An analysis of crack and porosity formation in laser surface treated magnesia partially stabilized zirconia (MgO-PSZ) and methods for alleviation

J. Lawrence; D. W. Evans; J. Kell; J. R. Tyrer

LIACP 2010; P506https://doi.org/10.2351/1.5060921

Abstract

View Articletitled, An analysis of crack and porosity formation in laser surface treated magnesia partially stabilized zirconia (MgO-PSZ) and methods for alleviation

PDF

Precision adjustment of spring contacts using laser forming

D. O. MacCallum; G. A. Knorovsky; J. A. Palmer; J. D. Arvizu

LIACP 2010; P507https://doi.org/10.2351/1.5060922

Abstract

View Articletitled, Precision adjustment of spring contacts using laser forming

PDF

Mechanism of anisotropic stress generation in laser peening process

Koji Hirano; Atsushi Sugihashi; Hirofumi Imai; Naoya Hamada

LIACP 2010; P511https://doi.org/10.2351/1.5060925

Abstract

View Articletitled, Mechanism of anisotropic stress generation in laser peening process

PDF

Spring-back control in laser assisted mechanical forming of dual phase steels

Pablo M. Romero; Germán J. Rodríguez; Jorge L. Arias; Joaquín Vázquez

LIACP 2010; P513https://doi.org/10.2351/1.5060926

Abstract

View Articletitled, Spring-back control in laser assisted mechanical forming of dual phase steels

PDF

The effects of laser forming on superelastic NiTi shape memory alloys

Andrew J. Birnbaum; Y. Lawrence Yao

LIACP 2010; P529https://doi.org/10.2351/1.5060940

Abstract

View Articletitled, The effects of laser forming on superelastic NiTi shape memory alloys

PDF

The influence of the cooling rate on structure of laser boronizing layer on nodular iron

Marta Paczkowska; Włodzimierz Waligóra

LIACP 2010; P549https://doi.org/10.2351/1.5060950

Abstract

View Articletitled, The influence of the cooling rate on structure of laser boronizing layer on nodular iron

PDF

Rapid Prototyping, Sintering & Powder Bed Technology

Development of laser-based techniques for rapid prototyping of printed wiring boards

Nicholas Dellas; Brock Golesich; Kenneth Meinert; Suzanne Mohney

LIACP 2010; 1801https://doi.org/10.2351/1.5060789

Abstract

View Articletitled, Development of laser-based techniques for rapid prototyping of printed wiring boards

PDF

Study of the process of rapid prototyping with laser beam

V. Kovalenko; M. Anyakin; P. Kondrashov; A. Mukhoid; A. Stepura; R. Zhuk

LIACP 2010; 1802https://doi.org/10.2351/1.5060790

Abstract

View Articletitled, Study of the process of rapid prototyping with laser beam

PDF

Analysis of the laser sintering process for direct manufacturing of mould

Nadine Coulon; Yorris Lafaye; Pascal Aubry

LIACP 2010; 1803https://doi.org/10.2351/1.5060791

Abstract

View Articletitled, Analysis of the laser sintering process for direct manufacturing of mould

PDF

Parametric analysis of selective laser melting technology

I. Yadroitsev; Ph. Bertrand; I. Smurov

LIACP 2010; 1805https://doi.org/10.2351/1.5060792

Abstract

View Articletitled, Parametric analysis of selective laser melting technology

PDF

A study on the selective dual laser sintering process for the solid freeform fabrication system

Dong Soo Kim; Young Jin Ahn; Sung Woo Bae; Byung Oh Choi; Kyung Hyun Choi

LIACP 2010; 1806https://doi.org/10.2351/1.5060793

Abstract

View Articletitled, A study on the selective dual laser sintering process for the solid freeform fabrication system

PDF

Development of polyamide-6 powders and its effect on the fabrication by selective laser sintering

Dong Soo Kim; Young Jin Ahn; Sung Woo Bae; Chung-Hwan Kim; Hyung-Il Kim

LIACP 2010; 1807https://doi.org/10.2351/1.5060794

Abstract

View Articletitled, Development of polyamide-6 powders and its effect on the fabrication by selective laser sintering

PDF

Three - dimensional prototyping from metallic powder: Melting by cw/pulsed Nd:YAG laser with electric heater

Teruyuki Hayashi; Toshiyuki Miyazaki; Tsuyoshi Tokunaga; Yota Mizukami

LIACP 2010; P515https://doi.org/10.2351/1.5060928

Abstract

View Articletitled, Three - dimensional prototyping from metallic powder: Melting by cw/pulsed Nd:YAG laser with electric heater

PDF

Research on sintering parameters and prototyping quality of SLS polymer powders

Pengcheng Wang; Xiaocheng Li; Junjie Xiao; Fushun Zhu; Yan Yang

LIACP 2010; P517https://doi.org/10.2351/1.5060930

Abstract

View Articletitled, Research on sintering parameters and prototyping quality of SLS polymer powders

PDF

Research on application of DSPC via SLS

Pengcheng Wang; Junjie Xiao; Xiaocheng Li; Fushun Zhu; Xiaonan Wang

LIACP 2010; P524https://doi.org/10.2351/1.5060935

Abstract

View Articletitled, Research on application of DSPC via SLS

PDF

Application of SLS technique in manufacturing alkaili-corrosive resisting valve pieces

Pengcheng Wang; Fushun Zhu; Junjie Xiao; Xiaocheng Li; Xiehan Chen

LIACP 2010; P525https://doi.org/10.2351/1.5060936

Abstract

View Articletitled, Application of SLS technique in manufacturing alkaili-corrosive resisting valve pieces

PDF

Hybrid Laser Welding

Dynamic behaviour of CO₂ laser GMA hybrid welding

Claus Thomy; Frank Vollertsen

LIACP 2010; 1901https://doi.org/10.2351/1.5060795

Abstract

View Articletitled, Dynamic behaviour of CO2 laser GMA hybrid welding

PDF

Gap tolerant joining of aluminum with steel sheets using the hybrid technique

Michael Kreimeyer; Frank Vollertsen

LIACP 2010; 1902https://doi.org/10.2351/1.5060796

Abstract

View Articletitled, Gap tolerant joining of aluminum with steel sheets using the hybrid technique

PDF

Production of sound deep-penetration hybrid weld in aluminum alloy with YAG laser and MIG arc

Seiji Katayama; Satoru Uchiumi; Francis Briand

LIACP 2010; 1903https://doi.org/10.2351/1.5060797

Abstract

View Articletitled, Production of sound deep-penetration hybrid weld in aluminum alloy with YAG laser and MIG arc

PDF

Observation of the phenomena of CO₂ laser-mag hybrid welding

Anna Fellman; Antti Salminen

LIACP 2010; 1904https://doi.org/10.2351/1.5060798

Abstract

View Articletitled, Observation of the phenomena of CO2 laser-mag hybrid welding

PDF

Hybrid laser welding and friction stir welding applied to 6056 aluminium alloy

Jo Verwimp; Jan Gedopt; Eric Geerinckx; Wim Van Haver

LIACP 2010; 1905https://doi.org/10.2351/1.5060799

Abstract

View Articletitled, Hybrid laser welding and friction stir welding applied to 6056 aluminium alloy

PDF

Continued experimental analysis of practical aspects of hybrid welding of thick sections

E. W. Reutzel; L. A. Kern; J. F. Tressler

LIACP 2010; 1906https://doi.org/10.2351/1.5060800

Abstract

View Articletitled, Continued experimental analysis of practical aspects of hybrid welding of thick sections

PDF

Failure criteria for laser and hybrid welded sandwich panels

Kenneth C. Meinert, Jr.; Richard P. Martukanitz; Donald A. Koss

LIACP 2010; 1907https://doi.org/10.2351/1.5060801

Abstract

View Articletitled, Failure criteria for laser and hybrid welded sandwich panels

PDF

Modelling of Powder Deposition Processes

Development of new material systems for direct laser freeform fabrication

Maren Petersen; Claus Emmelmann

LIACP 2010; 2002https://doi.org/10.2351/1.5060802

Abstract

View Articletitled, Development of new material systems for direct laser freeform fabrication

PDF

Fully coupled temperature-stress finite element analysis for thermal stresses in laser aided dmd process

Suhash Ghosh; Joohyun Choi

LIACP 2010; 2003https://doi.org/10.2351/1.5060803

Abstract

View Articletitled, Fully coupled temperature-stress finite element analysis for thermal stresses in laser aided dmd process

PDF

Real-time prediction of dilution for automated laser powder deposition process

Alireza Fathi; Ehsan Toyserkani; Amir Khajepour

LIACP 2010; 2004https://doi.org/10.2351/1.5060804

Abstract

View Articletitled, Real-time prediction of dilution for automated laser powder deposition process

PDF

Finite element analysis of laser powder deposition of titanium

Antonio Crespo; Augusto Deus; Rui Vilar

LIACP 2010; 2005https://doi.org/10.2351/1.5060805

Abstract

View Articletitled, Finite element analysis of laser powder deposition of titanium

PDF

Modeling of geometry and temperature during direct metal deposition

Xiuli He; Jyoti Mazumder

LIACP 2010; 2006https://doi.org/10.2351/1.5060806

Abstract

View Articletitled, Modeling of geometry and temperature during direct metal deposition

PDF

On the 3D modeling of geometrical formation in laser solid freeform fabrication process

Masoud Alimardani; Ehsan Toyserkani

LIACP 2010; 2007https://doi.org/10.2351/1.5060807

Abstract

View Articletitled, On the 3D modeling of geometrical formation in laser solid freeform fabrication process

PDF

Fabrication of Fe-based bulk metallic glass components using laser additive manufacturing

S. M. Kelly

LIACP 2010; P539https://doi.org/10.2351/1.5060946

Abstract

View Articletitled, Fabrication of Fe-based bulk metallic glass components using laser additive manufacturing

PDF

LASER MICROPROCESSING CONFERENCE MANUSCRIPTS

Laser Micromachining

High repetition rate ps- and fs-lasers for micromachining

Gediminas Raciukaitis; Mikhail Grishin; Romas Danielius; Jonas Pocius; Linas Giniunas

LIACP 2010; M1001https://doi.org/10.2351/1.5060857

Abstract

View Articletitled, High repetition rate ps- and fs-lasers for micromachining

PDF

Effect of laser wavelength on machining characteristics of aluminum nitride in micro-boring

Norio Kataoka; Yasuhiro Okamoto; Yoshiyuki Uno; Itaru Tanino

LIACP 2010; M1002https://doi.org/10.2351/1.5060858

Abstract

View Articletitled, Effect of laser wavelength on machining characteristics of aluminum nitride in micro-boring

PDF

Improved picosecond laser radiation for micromachining

Thomas Herrmann; Hatim Haloui; Ralf Knappe; Bernhard Henrich; Achim Nebel

LIACP 2010; M1003https://doi.org/10.2351/1.5060859

Abstract

View Articletitled, Improved picosecond laser radiation for micromachining

PDF

Machinability of laser heated silicon nitride ceramics during a turning process

M. Jankowiak; K. Bartkowiak

LIACP 2010; M1005https://doi.org/10.2351/1.5060860

Abstract

View Articletitled, Machinability of laser heated silicon nitride ceramics during a turning process

PDF

Femtosecond laser machining of dielectric materials for biomedical applications

Hae Woon Choi; Burr Zimmerman; Jeremey Steach; Dave F. Farson; Jeffery J. Chalmers; Susan V. Olesik

LIACP 2010; M1006https://doi.org/10.2351/1.5060861

Abstract

View Articletitled, Femtosecond laser machining of dielectric materials for biomedical applications

PDF

Laser engraving reflective metals to create scanner readable barcodes

Paul M. Harrison; Jozef Wendland; Matthew Henry

LIACP 2010; P516https://doi.org/10.2351/1.5060929

Abstract

View Articletitled, Laser engraving reflective metals to create scanner readable barcodes

PDF

A system for the removal of debris produced during laser micromachining

C. F. Dowding; J. Lawrence

LIACP 2010; P523https://doi.org/10.2351/1.5060934

Abstract

View Articletitled, A system for the removal of debris produced during laser micromachining

PDF

Drilling strategies for metals with pulsed YAG lasers

Rene Liebers; Ulrich Dürr; Lena Trippe; Wolfgang Schultz

LIACP 2010; P530https://doi.org/10.2351/1.5060941

Abstract

View Articletitled, Drilling strategies for metals with pulsed YAG lasers

PDF

Laser drilling of pet-backed unfired ceramic

Leonard Migliore

LIACP 2010; P532https://doi.org/10.2351/1.5060942

Abstract

View Articletitled, Laser drilling of pet-backed unfired ceramic

PDF

Laser Microprocessing

A microfluidic bioarray system using laser-machined surface microstructures

Tadatake Sato; Tomas Gumpenberger; Ryozo Kurosaki; Aiko Narazaki; Yoshizo Kawaguchi; Hiroyuki Niino

LIACP 2010; M101https://doi.org/10.2351/1.5060862

Abstract

View Articletitled, A microfluidic bioarray system using laser-machined surface microstructures

PDF

Fabrication, characterization and simulation of noval 3-D photonic bandgap structures using laser chemical vapor deposition

H. Wang; Y. F. Lu; Z. Y. Yang

LIACP 2010; M102https://doi.org/10.2351/1.5060863

Abstract

View Articletitled, Fabrication, characterization and simulation of noval 3-D photonic bandgap structures using laser chemical vapor deposition

PDF

Microstructures and mechanical properties of laminated structural Nb-Ti-Al composites fabricated by laser deposition

Jinjiang He; Minlin Zhong; Wenjin Liu; Hongjun Zhang

LIACP 2010; M103https://doi.org/10.2351/1.5060864

Abstract

View Articletitled, Microstructures and mechanical properties of laminated structural Nb-Ti-Al composites fabricated by laser deposition

PDF

Laser-assisted combustion-flame synthesis of diamond films

Y. X. Han; H. Ling; Y. F. Lu

LIACP 2010; M104https://doi.org/10.2351/1.5060865

Abstract

View Articletitled, Laser-assisted combustion-flame synthesis of diamond films

PDF

Analysis of modified layer formation into silicon wafer by permeable nanosecond laser

Etsuji Ohmura; Kenshi Fukumitsu; Naoki Uchiyama; Kazuhiro Atsumi; Masayoshi Kumagai; Hideki Morita

LIACP 2010; M105https://doi.org/10.2351/1.5060868

Abstract

View Articletitled, Analysis of modified layer formation into silicon wafer by permeable nanosecond laser

PDF

Optimisation of TiN thin film synthesis by a novel combined laser/sol-gel processing technique

Tamer Ezz; Philip Crouse; Lin Li; Zhu Liu

LIACP 2010; M106https://doi.org/10.2351/1.5060870

Abstract

View Articletitled, Optimisation of TiN thin film synthesis by a novel combined laser/sol-gel processing technique

PDF

Industrial applications of laser micro/nano material processing

Wenwu Zhang; Magdi Azer; Pamela Benicewicz; Marshall Jones; Long Que

LIACP 2010; M401https://doi.org/10.2351/1.5060890

Abstract

View Articletitled, Industrial applications of laser micro/nano material processing

PDF

Compact QCW laser arrays for use in demanding environments

R. N. Pathak; C. Cao; J. Helmrich; B. Caliva; F. Lapinski; P. Thiagarajan; R. Walker; M. McElhinney

LIACP 2010; M402https://doi.org/10.2351/1.5060891

Abstract

View Articletitled, Compact QCW laser arrays for use in demanding environments

PDF

Laser drilling of single crystal silicon carbide substrates

Chong Zhang; Nathaniel R. Quick; Aravinda Kar

LIACP 2010; M403https://doi.org/10.2351/1.5060892

Abstract

View Articletitled, Laser drilling of single crystal silicon carbide substrates

PDF

Corrosion behavior of laser-oxidized NiTi in hanks’ solution

M. H. Wong; F. T. Cheng; H. C. Man

LIACP 2010; M404https://doi.org/10.2351/1.5060893

Abstract

View Articletitled, Corrosion behavior of laser-oxidized NiTi in hanks’ solution

PDF

KrF excimer laser processing of human dental hard tissues

M. Sivakumar; V. Oliveira; S. Eugénio; R. Vilar

LIACP 2010; M405https://doi.org/10.2351/1.5060894

Abstract

View Articletitled, KrF excimer laser processing of human dental hard tissues

PDF

Laser-assisted micro-forming with laser strucutred sapphire dies

Katja Samm; Mahdi Terzi; Andreas Ostendorf; Jens Wulfsberg

LIACP 2010; M601https://doi.org/10.2351/1.5060898

Abstract

View Articletitled, Laser-assisted micro-forming with laser strucutred sapphire dies

PDF

Development of laser forming of thin section materials using rapid scanning optics for macro-applications

K. Bartkowiak

LIACP 2010; M602https://doi.org/10.2351/1.5060899

Abstract

View Articletitled, Development of laser forming of thin section materials using rapid scanning optics for macro-applications

PDF

Comparative study of symmetric and asymmetric deformation of Al single crystal under micro scale laser shock peening

Sinisa Vukelic; Youneng Wang; Jeffrey W. Kysar; Y. Lawrence Yao

LIACP 2010; M604https://doi.org/10.2351/1.5060900

Abstract

View Articletitled, Comparative study of symmetric and asymmetric deformation of Al single crystal under micro scale laser shock peening

PDF

Waterjet as a multimode waveguide-theoretical and experimental investigation of modal noise and beam propagation in material processing with lasermicrojet

Joseph Battaglia; Tuan Anh Mai; Delphine Perrottet; Bernold Richerzhagen

LIACP 2010; M605https://doi.org/10.2351/1.5060901

Abstract

View Articletitled, Waterjet as a multimode waveguide-theoretical and experimental investigation of modal noise and beam propagation in material processing with lasermicrojet

PDF

Laser fabrication of silicon carbide light emitting diodes

Sachin Bet; Nathaniel Quick; Aravinda Kar

LIACP 2010; M606https://doi.org/10.2351/1.5060902

Abstract

View Articletitled, Laser fabrication of silicon carbide light emitting diodes

PDF

The role of fiber lasers in generative manufacturing

John Tinson

LIACP 2010; M607https://doi.org/10.2351/1.5060903

Abstract

View Articletitled, The role of fiber lasers in generative manufacturing

PDF

Mechanism and prediction of laser wet cleaning of marble encrustation

Jie Zhang; Andrew J. Birnbaum; Y. Lawrence Yao; Fen Xu; John R. Lombard

LIACP 2010; P514https://doi.org/10.2351/1.5060927

Abstract

View Articletitled, Mechanism and prediction of laser wet cleaning of marble encrustation

PDF

Numerical modeling for embedding of fiber Bragg grating sensors within metallic structures using laser solid freeform fabrication

Hamidreza Alemohammad; Ehsan Toyserkani

LIACP 2010; P526https://doi.org/10.2351/1.5060937

Abstract

View Articletitled, Numerical modeling for embedding of fiber Bragg grating sensors within metallic structures using laser solid freeform fabrication

PDF

Lasers in Nanotechnology

Nanostructuring in Si using a femtosecond laser

Ming Li

LIACP 2010; M1101https://doi.org/10.2351/1.5060871

Abstract

View Articletitled, Nanostructuring in Si using a femtosecond laser

PDF

Sintering nano-particles on low temperature materials

Michael Carter; Jacob Colvin; James Sears

LIACP 2010; M1102https://doi.org/10.2351/1.5060872

Abstract

View Articletitled, Sintering nano-particles on low temperature materials

PDF

Direct laser pyrolysis of nanostructured micro components

Johannes Wilden; Jean Pierre Bergmann; Sebastian Schlichting; Markus Dolles

LIACP 2010; M1103https://doi.org/10.2351/1.5060873

Abstract

View Articletitled, Direct laser pyrolysis of nanostructured micro components

PDF

Raman mapping of single-wall carbon nanotubes at nanoscales with micro-Raman

K. J. Yi; Y. F. Lu; J. Shi

LIACP 2010; M1104https://doi.org/10.2351/1.5060874

Abstract

View Articletitled, Raman mapping of single-wall carbon nanotubes at nanoscales with micro-Raman

PDF

Connection of macro-sized double-walled carbon nanotube strands by current-assisted laser irradiation

Tao Gong; Yong Zhang; Wenjin Liu; Jinquan Wei; Kunlin Wang; Dehai Wu; Minlin Zhong

LIACP 2010; M1105https://doi.org/10.2351/1.5060875

Abstract

View Articletitled, Connection of macro-sized double-walled carbon nanotube strands by current-assisted laser irradiation

PDF

Aligned synthesis of carbon nanotubes by laser-assisted chemical vapor deposition

J. Shi; Y. S. Zhou; Y. F. Lu; K. J. Yi

LIACP 2010; M1106https://doi.org/10.2351/1.5060876

Abstract

View Articletitled, Aligned synthesis of carbon nanotubes by laser-assisted chemical vapor deposition

PDF

Light emission characterization from multiwalled carbon nanotubes under CO₂ laser irradiation

Yong Zhang; Tao Gong; Wenjin Liu; Minlin Zhong; Dehai Wu

LIACP 2010; M1107https://doi.org/10.2351/1.5060877

Abstract

View Articletitled, Light emission characterization from multiwalled carbon nanotubes under CO2 laser irradiation

PDF

Lasers in Diagnostics

Study of magnetic confinement in laser-induced plasmas by optical emission spectroscopy and fast photography

X. K. Shen; Y. F. Lu; T. Gebre

LIACP 2010; M1202https://doi.org/10.2351/1.5060878

Abstract

View Articletitled, Study of magnetic confinement in laser-induced plasmas by optical emission spectroscopy and fast photography

PDF

Study of hole properties in percussion regime with a new analysis method

M. Schneider; M. Muller; R. Fabbro; L. Berthe

LIACP 2010; M1203https://doi.org/10.2351/1.5060879

Abstract

View Articletitled, Study of hole properties in percussion regime with a new analysis method

PDF

The transition from qualitative plexiglas burn-ins to quantitative electronic data acquisition for beam diagnostics (evaluation, benchmark)

Reinhard Kramer; Otto Märten; Harald Schwede; Stefan Wolf; Volker Brandl

LIACP 2010; P527https://doi.org/10.2351/1.5060938

Abstract

View Articletitled, The transition from qualitative plexiglas burn-ins to quantitative electronic data acquisition for beam diagnostics (evaluation, benchmark)

PDF

Ultrafast Laser Processing

3D-laser nanofabrication: Diffractive holography versus femtosecond direct writing

Peter R. Herman; Debashis Chanda; Ladan Abolghasemi

LIACP 2010; M201https://doi.org/10.2351/1.5060880

Abstract

View Articletitled, 3D-laser nanofabrication: Diffractive holography versus femtosecond direct writing

PDF

Influence of the repetition rate on self organized surface structuring during femtosecond pulsed laser ablation

Max Groenendijk; Johan Meijer

LIACP 2010; M202https://doi.org/10.2351/1.5060881

Abstract

View Articletitled, Influence of the repetition rate on self organized surface structuring during femtosecond pulsed laser ablation

PDF

Femtosecond laser structuring of PCL and PET electrospun nanofiber mesh

Hae Woon Choi; Jed Johnson; Dave F. Farson; John Lannutti

LIACP 2010; M203https://doi.org/10.2351/1.5060882

Abstract

View Articletitled, Femtosecond laser structuring of PCL and PET electrospun nanofiber mesh

PDF

High energy diode-pumped femtosecond oscillator with 1 µJ pulse energy at 9 MHz pulse repetition rate

Clemens Hönninger; Eric Mottay

LIACP 2010; M204https://doi.org/10.2351/1.5060883

Abstract

View Articletitled, High energy diode-pumped femtosecond oscillator with 1 µJ pulse energy at 9 MHz pulse repetition rate

PDF

Microstructures on metal plate produced with femtosecond laser

Masahiro Tsukamoto; Keita Asuka; Hitoshi Nakano; Yuichi Komizo; Toshiya Shibayanagi; Masayuki Fujita; Masaki Hashida; Masahito Katto; Nobuyuki Abe

LIACP 2010; M205https://doi.org/10.2351/1.5060884

Abstract

View Articletitled, Microstructures on metal plate produced with femtosecond laser

PDF

1 mJ, multi-kHz, sub-500 fs diode-pumped Ytterbium laser amplifier

Clemens Hönninger; Antoine Courjaud; Eric Mottay; Martin Delaigue; Inka Manek-Hönninger

LIACP 2010; M206https://doi.org/10.2351/1.5060885

Abstract

View Articletitled, 1 mJ, multi-kHz, sub-500 fs diode-pumped Ytterbium laser amplifier

PDF

Modeling of ultrafast laser ablation into vacuum

Mark Squires; Cho Lik Chan

LIACP 2010; M302https://doi.org/10.2351/1.5060886

Abstract

View Articletitled, Modeling of ultrafast laser ablation into vacuum

PDF

Picosecond laser material processing - Prospects and limitations

Ulrich Klug; Beatrix Kamlage-Rahn; Jürgen Koch; Ralf Knappe; Uwe Stute; Boris Chichkov

LIACP 2010; M303https://doi.org/10.2351/1.5060887

Abstract

View Articletitled, Picosecond laser material processing - Prospects and limitations

PDF

Patterning of ITO on glass with picosecond lasers for oleds

Gediminas Raciukaitis; Marijus Brikas; Mindaugas Gedvilas; Gediminas Darcianovas

LIACP 2010; M304https://doi.org/10.2351/1.5060888

Abstract

View Articletitled, Patterning of ITO on glass with picosecond lasers for oleds

PDF

Post processing of EDM-machined microstructures by ultra short pulsed laser ablation

Sebastian Haupt; Jürgen Schmidt; Jürgen Fleischer

LIACP 2010; M305https://doi.org/10.2351/1.5060889

Abstract

View Articletitled, Post processing of EDM-machined microstructures by ultra short pulsed laser ablation

PDF

Laser Micropackaging

Development of DPSS-laser-based ito patterning system for large-scale FPD’s

Naoaki Fukuda

LIACP 2010; M502https://doi.org/10.2351/1.5060895

Abstract

View Articletitled, Development of DPSS-laser-based ito patterning system for large-scale FPD’s

PDF

Nanoscale analysis of laser ablated thin films used in industrial manufacturing of flat panel displays

Matt Henry; Jozef Wendland; Paul M. Harrison

LIACP 2010; M503https://doi.org/10.2351/1.5060896

Abstract

View Articletitled, Nanoscale analysis of laser ablated thin films used in industrial manufacturing of flat panel displays

PDF

A laser selective etching process for next-generation flexible display

K. R. Kim; K. Y. Baek; J. W. Kim; S. C. Oh; C. H Cho; H. S. Kang; S. K. Hong; Y. W. Choi; S. S. Yoon; J. H. Son

LIACP 2010; M504https://doi.org/10.2351/1.5060897

Abstract

View Articletitled, A laser selective etching process for next-generation flexible display

PDF

Recent advances in laser micromachining for semiconductor and microfluidic applications

Robert F. Hainsey; Andrew E. Hooper; Edward J. Swenson; Michael S. Nashner

LIACP 2010; M701https://doi.org/10.2351/1.5060904

Abstract

View Articletitled, Recent advances in laser micromachining for semiconductor and microfluidic applications

PDF

Advanced fiber laser marking on very small IC packages and microprocessing of very thin films

R. Bhandari; T. Kamiya

LIACP 2010; M702https://doi.org/10.2351/1.5060905

Abstract

View Articletitled, Advanced fiber laser marking on very small IC packages and microprocessing of very thin films

PDF

Laser processing for back-contacted silicon solar cells

P. Engelhart; R. Grischke; S. Eidelloth; R. Meyer; A. Schoonderbeek; U. Stute; A. Ostendorf; R. Brendel

LIACP 2010; M703https://doi.org/10.2351/1.5060906

Abstract

View Articletitled, Laser processing for back-contacted silicon solar cells

PDF

Laser technology for cost reduction in silicon solar cell production

Aart Schoonderbeek; Uwe Stute; Andreas Ostendorf; Rainer Grischke; Peter Engelhart; Rüdiger Meyer; Rolf Brendel

LIACP 2010; M704https://doi.org/10.2351/1.5060907

Abstract

View Articletitled, Laser technology for cost reduction in silicon solar cell production

PDF

Advances in laser singulation of silicon

Leonard Migliore; Kang-Soo Lee; Kim Jeong-Moog; Choi Byung-Kew

LIACP 2010; M902https://doi.org/10.2351/1.5060914

Abstract

View Articletitled, Advances in laser singulation of silicon

PDF

To advent of portable MEMS devices in spectroscopy applications

Mouli Ramani

LIACP 2010; M904https://doi.org/10.2351/1.5060915

Abstract

View Articletitled, To advent of portable MEMS devices in spectroscopy applications

PDF

Synova has re-invented the laser: No heat damage, no beam divergence, no cutting gas, no deposition

Joseph Battaglia; Delphine Perrottet; Roy Housh; Bernold Richerzhagen

LIACP 2010; M905https://doi.org/10.2351/1.5060916

Abstract

View Articletitled, Synova has re-invented the laser: No heat damage, no beam divergence, no cutting gas, no deposition

PDF

Laser Micro-Cladding & Welding

Direct fabrication of thermosensors by laser micro-cladding functional materials

Xiaoyan Zeng; Zhigang Dai; Xiangyou Li

LIACP 2010; M801https://doi.org/10.2351/1.5060908

Abstract

View Articletitled, Direct fabrication of thermosensors by laser micro-cladding functional materials

PDF

Tribaloy-800 coatings on steel substrates by means of laser cladding: Dilution effects on the microstructure and coating performance

M. J. Tobar; C. Montero; J. M. Amado; C. Alvarez; A. Yañez

LIACP 2010; M802https://doi.org/10.2351/1.5060909

Abstract

View Articletitled, Tribaloy-800 coatings on steel substrates by means of laser cladding: Dilution effects on the microstructure and coating performance

PDF

Comparison of different process monitoring methods for laser beam micro welding

Jens Gedicke; Boris Regaard; Kilian Klages; Alexander Olowinsky; Stefan Kaierle

LIACP 2010; M803https://doi.org/10.2351/1.5060910

Abstract

View Articletitled, Comparison of different process monitoring methods for laser beam micro welding

PDF

Micro edge welding of thin Ni based alloy foils with direct diode laser processing and its application

Yoshinori Funada; Nobuyuki Abe; Masahiro Tsukamoto

LIACP 2010; M804https://doi.org/10.2351/1.5060911

Abstract

View Articletitled, Micro edge welding of thin Ni based alloy foils with direct diode laser processing and its application

PDF

Shadow^® – New applications in electronics and micromechanics

A. Olowinsky; K. Klages; J. Gedicke; A. Gillner; R. Poprawe

LIACP 2010; M805https://doi.org/10.2351/1.5060912

Abstract

View Articletitled, Shadow® – New applications in electronics and micromechanics

PDF

Metal micromachining with a new high average power picosecond pulse fiber laser

Jukka Kongas; Tiina Amberla; Matt Rekow

LIACP 2010; M806https://doi.org/10.2351/1.5060913

Abstract

View Articletitled, Metal micromachining with a new high average power picosecond pulse fiber laser

PDF

All Years

Proceedings Papers

LASER MATERIALS PROCESSING MANUSCRIPTS

Laser Cladding

Modelling and Beam Interaction

Hybrid Welding

Laser Systems

Laser Metal Deposition

Laser Surfacing and Machining

Sensing and Control

Laser Cutting Drilling and Cleaning

Laser Welding

Laser Welding Properties and Expert Systems

PLENARY SESSION MANUSCRIPTS

New Lasers and Applications

MICRO NANO AND ULTRAFAST FABRICATION MANUSCRIPTS

Micromachining Applications

Femtosecond Applications

Optical Devices

Processes and Techniques

LASER MATERIALS PROCESSING CONFERENCE MANUSCRIPTS

Fundamentals of Laser Welding

Laser Cladding for Tooling & Moulds & Laser Assisted Deposition

Laser Processing in the Aerospace, Defence & Space Industries

Laser Cutting

Laser Processing in the Automotive Sector