Volumes | LIA Conference Proceedings | AIP Publishing

Skip to Main Content

Skip Nav Destination

ICALEO® 2011: 30th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing

CLOSING PLENARY SESSION

Joint Session (LMP & LMF): Strategies, Limits and Challenges for Advanced Laser Processing

Novel diffractive beam splitters with efficiency above 95% enable multiple beam parallel processing with highest throughput

O. Homburg; Y. Miklyaev; A. Krasnaberski; L. Kleinschmidt; D. Pikhulia; M. Ivanenko; V. Lissotschenko

LIACP 1990; 1-5https://doi.org/10.2351/1.5062236

View Articletitled, Novel diffractive beam splitters with efficiency above 95% enable multiple beam parallel processing with highest throughput

LASER MATERIALS PROCESSING CONFERENCE

LMP 1: Laser Cutting

Laser cutting from CO₂ laser to disc or fiber laser – Possiblities and challenges

Flemming O. Olsen

LIACP 1990; 6-15https://doi.org/10.2351/1.5062313

View Articletitled, Laser cutting from CO<sub>2</sub> laser to disc or fiber laser – Possiblities and challenges

The energetic efficiency of remote cutting in comparison to conventional fusion cutting

M. Lütke; F. Bartels; J. Hauptmann; A. Wetzig; E. Beyer

LIACP 1990; 16-24https://doi.org/10.2351/1.5062232

View Articletitled, The energetic efficiency of remote cutting in comparison to conventional fusion cutting

Influence of fiber laser cutting parameters on the subsequent laser welding of Ti6Al4V sheets

Leonardo Daniele Scintilla; Donato Sorgente; Gianfranco Palumbo; Luigi Tricarico; Marco Brandizzi; Annunziata Anna Satriano

LIACP 1990; 25-33https://doi.org/10.2351/1.5062245

View Articletitled, Influence of fiber laser cutting parameters on the subsequent laser welding of Ti6Al4V sheets

Influence of cut front temperature profile on cutting process

Volkher Onuseit; Michael Jarwitz; Rudolf Weber; Thomas Graf

LIACP 1990; 34-39https://doi.org/10.2351/1.5062256

View Articletitled, Influence of cut front temperature profile on cutting process

Experimental investigation on the cut front geometry in the inert gas laser fusion cutting with disk and CO₂ lasers

Leonardo Daniele Scintilla; Luigi Tricarico; Achim Mahrle; Andreas Wetzig; Eckhard Beyer

LIACP 1990; 40-49https://doi.org/10.2351/1.5062266

View Articletitled, Experimental investigation on the cut front geometry in the inert gas laser fusion cutting with disk and CO<sub>2</sub> lasers

Study on striation generation process during laser cutting of steel

Koji Hirano; Remy Fabbro

LIACP 1990; 50-59https://doi.org/10.2351/1.5062285

View Articletitled, Study on striation generation process during laser cutting of steel

Numerical studies of laser cutting on an active electrode material for lithium-ion batteries

Dongkyoung Lee; Jyotirmoy Mzaumder

LIACP 1990; 60-70https://doi.org/10.2351/1.5062300

View Articletitled, Numerical studies of laser cutting on an active electrode material for lithium-ion batteries

Effect of linear cutting energy on coloration of paper in laser cutting of paper material

Alexander Stepanov; Heidi Piili; Esa Saukkonen; Antti Salminen

LIACP 1990; 71-79https://doi.org/10.2351/1.5062317

View Articletitled, Effect of linear cutting energy on coloration of paper in laser cutting of paper material

LMP 2: Process Monitoring & Control I

Camera-based laser beam welding sensor in the near infrared spectral range

Holger Braun; Friedhelm Dorsch; Steffen Keßler; Dieter Pfitzner; Volker Rominger

LIACP 1990; 80-84https://doi.org/10.2351/1.5062331

View Articletitled, Camera-based laser beam welding sensor in the near infrared spectral range

Closed loop control of laser welding using an optical spectroscopic sensor for Nd:YAG and CO₂ lasers

Ali Riza Konuk; Ronald Aarts; Bert Huis in’t Veld; Teresa Sibillano; Domenico Rizzi; Antonio Ancona

LIACP 1990; 85-94https://doi.org/10.2351/1.5062339

View Articletitled, Closed loop control of laser welding using an optical spectroscopic sensor for Nd:YAG and CO<sub>2</sub> lasers

Novel monitoring system for spatially resolved topographical measurement of laser-based processes

Jan-Philipp Weberpals; Peter Berger; Thomas Graf; Johannes Trein; Holger Singpiel

LIACP 1990; 95-103https://doi.org/10.2351/1.5062355

View Articletitled, Novel monitoring system for spatially resolved topographical measurement of laser-based processes

Real-time process control by machine vision

Christoph Franz; Peter Abels; Michael Merz; Holger Singpiel; Johannes Trein

LIACP 1990; 104-109https://doi.org/10.2351/1.5062179

View Articletitled, Real-time process control by machine vision

Online measurement and closed loop control of penetration depth in laser welding processes

Felix Abt; Harald Wölfelschneider; Claudia Baulig; Heinrich Höfler; Rudolf Weber; Thomas Graf

LIACP 1990; 110-117https://doi.org/10.2351/1.5062188

View Articletitled, Online measurement and closed loop control of penetration depth in laser welding processes

A rapid image processing algorithm for structured light stripe welding seam tracking in laser welding

Xianfeng Shen; Wenhua Teng

LIACP 1990; 118-124https://doi.org/10.2351/1.5062200

View Articletitled, A rapid image processing algorithm for structured light stripe welding seam tracking in laser welding

A beam monitoring system for large and scanned laser spots - LASMON

Jan Hannweber; Alexander Galant; Steffen Bonß; Berndt Brenner; Eckhard Beyer

LIACP 1990; 125-128https://doi.org/10.2351/1.5062213

View Articletitled, A beam monitoring system for large and scanned laser spots - LASMON

LMP 3: Welding I

New type of laser welded wall panel of train coach

Jukka Siltanen; Ilpo Maaranen; Ville-Matti Nurmela

LIACP 1990; 129-137https://doi.org/10.2351/1.5062220

View Articletitled, New type of laser welded wall panel of train coach

Resistance spot welding gun meets fiber laser – An alternative to remote welding?

Klaus Krastel

LIACP 1990; 138-140https://doi.org/10.2351/1.5062226

View Articletitled, Resistance spot welding gun meets fiber laser – An alternative to remote welding?

Laser narrow gap welding of thick carbon steels using high brightness laser with beam oscillation

Takeshi Tsukamoto; Hirotsugu Kawanaka; Yoshihisa Maeda

LIACP 1990; 141-146https://doi.org/10.2351/1.5062227

View Articletitled, Laser narrow gap welding of thick carbon steels using high brightness laser with beam oscillation

Dual core delivery fibers for 1µm high power lasers increasing the flexibility in applications

Klaus Loeffler; Ruediger Brockmann; Ralf Kohlloeffel

LIACP 1990; 147-149https://doi.org/10.2351/1.5062228

View Articletitled, Dual core delivery fibers for 1µm high power lasers increasing the flexibility in applications

Comparison of spatter characteristics in fiber and CO₂ laser beam welding of aluminum alloy

Hua Cai; Rongshi Xiao

LIACP 1990; 150-158https://doi.org/10.2351/1.5062229

View Articletitled, Comparison of spatter characteristics in fiber and CO<sub>2</sub> laser beam welding of aluminum alloy

Understanding the influence of the focal position in laser welding on spatter reduction

Jan-Philipp Weberpals; Philipp Krueger; Peter Berger; Thomas Graf

LIACP 1990; 159-168https://doi.org/10.2351/1.5062230

View Articletitled, Understanding the influence of the focal position in laser welding on spatter reduction

Laser beam welding with high-frequency beam oscillation: Welding of dissimilar materials with brilliant fiber lasers

Mathias Kraetzsch; Jens Standfuss; Annett Klotzbach; Joerg Kaspar; Berndt Brenner; Eckhard Beyer

LIACP 1990; 169-178https://doi.org/10.2351/1.5062231

View Articletitled, Laser beam welding with high-frequency beam oscillation: Welding of dissimilar materials with brilliant fiber lasers

LMP 4: Process Monitoring & Control II

X-ray videography for investigation of capillary and melt pool dynamics in different materials

Felix Abt; Meiko Boley; Rudolf Weber; Thomas Graf

LIACP 1990; 179-186https://doi.org/10.2351/1.5062233

View Articletitled, X-ray videography for investigation of capillary and melt pool dynamics in different materials

Effect of process parameters to monitoring of laser assisted additive manufacturing of alumina ceramics

Lauri Taimisto; Antti Lehti; Heidi Piili; Bin Qian; Olli Nyrhilä; Zhijian Shen; Antti Salminen

LIACP 1990; 187-195https://doi.org/10.2351/1.5062234

View Articletitled, Effect of process parameters to monitoring of laser assisted additive manufacturing of alumina ceramics

Correlation between pyrometer monitoring and active illuminaton imaging of laser assisted additive manufacturing of stainless steel

Antti Lehti; Lauri Taimisto; Heidi Piili; Olli Nyrhilä; Antti Salminen

LIACP 1990; 196-204https://doi.org/10.2351/1.5062235

View Articletitled, Correlation between pyrometer monitoring and active illuminaton imaging of laser assisted additive manufacturing of stainless steel

Improvements in laser cladding process through an FPGA-Based control system

Félix Vidal; J. L. Mato; M. Ángeles Montealegre; Pablo Colodrón; José Fariña; Juan J. Rodriguez-Andina

LIACP 1990; 205-210https://doi.org/10.2351/1.5062237

View Articletitled, Improvements in laser cladding process through an FPGA-Based control system

Automatic in-process control of laser metal-wire deposition based on sensor feedback

Almir Heralić; Anna-Karin Christiansson

LIACP 1990; 211-220https://doi.org/10.2351/1.5062238

View Articletitled, Automatic in-process control of laser metal-wire deposition based on sensor feedback

High speed video analysis of melt flow inside fiber laser welding keyholes

Ingemar Eriksson; John Powell; Alexander F. H. Kaplan

LIACP 1990; 221-226https://doi.org/10.2351/1.5062239

View Articletitled, High speed video analysis of melt flow inside fiber laser welding keyholes

Defect detection and sizing in laser-welded aluminium welds, using laser-generated ultrasounds

Gaël Diot; Afia Kouadri-David; Henri Walaszek; Laurent Dubourg; Jihed Flifla; Sylvain Guegan; Eric Ragneau

LIACP 1990; 227-233https://doi.org/10.2351/1.5062240

View Articletitled, Defect detection and sizing in laser-welded aluminium welds, using laser-generated ultrasounds

Focal spot monitoring of a high power fiber laser

Michael Scaggs; Gil Haas

LIACP 1990; 234-239https://doi.org/10.2351/1.5062241

View Articletitled, Focal spot monitoring of a high power fiber laser

LMP 5: Laser Metal Deposition (LMD): Applications & Systems

Laser cladding for railway repair and preventative maintenance

Adam Clare; Oyelola Olusola; Janet Folkes; Peter Farayibi

LIACP 1990; 240-249https://doi.org/10.2351/1.5062242

View Articletitled, Laser cladding for railway repair and preventative maintenance

Additive manufacturing of a blade-integrated disk by laser metal deposition

Johannes Witzel; Johannes Schrage; Andrés Gasser; Ingomar Kelbassa

LIACP 1990; 250-256https://doi.org/10.2351/1.5062243

View Articletitled, Additive manufacturing of a blade-integrated disk by laser metal deposition

Potential application and certification of laser cladding technology for repair of ageing aircraft components

Qianchu Liu; Milan Brandt; Madabhushi Janardhana; Ryan Cottam; Neil Matthews; Peter Khan Sharp

LIACP 1990; 257-266https://doi.org/10.2351/1.5062244

View Articletitled, Potential application and certification of laser cladding technology for repair of ageing aircraft components

Effects of melt pool size on transient and residual stress in DMD process

Hyung Min Chae; Jyoti Mazumder

LIACP 1990; 267-274https://doi.org/10.2351/1.5062246

View Articletitled, Effects of melt pool size on transient and residual stress in DMD process

Development of a model for prediction of material properties of laser cladded inconel 718 as related to porosity in the bulk material

Johannes Witzel; Thomas Schopphoven; Andrés Gasser; Ingomar Kelbassa

LIACP 1990; 275-282https://doi.org/10.2351/1.5062247

View Articletitled, Development of a model for prediction of material properties of laser cladded inconel 718 as related to porosity in the bulk material

Induction assisted laser cladding for high deposition rates

Aravind Jonnalagadda; Siegfried Scharek; Craig Bratt; David Albert; Tobias Weitzer

LIACP 1990; 283-294https://doi.org/10.2351/1.5062248

View Articletitled, Induction assisted laser cladding for high deposition rates

Advantages of laser metal deposition by using zoom optics and MWO (modular welding optics)

Chen Hong; Bernd Burbaum; Andres Gasser; Ingomar Kelbassa

LIACP 1990; 295-300https://doi.org/10.2351/1.5062249

View Articletitled, Advantages of laser metal deposition by using zoom optics and MWO (modular welding optics)

Power adjustment in laser cladding with scanning optics

Joonas Pekkarinen; Veli Kujanpää; Antti Salminen

LIACP 1990; 301-307https://doi.org/10.2351/1.5062250

View Articletitled, Power adjustment in laser cladding with scanning optics

LMP 6: Processing of Dissimilar Materials

Laser penetration brazing of dissimilar alloys

Rongshi Xiao; Peng Dong

LIACP 1990; 308-314https://doi.org/10.2351/1.5062251

View Articletitled, Laser penetration brazing of dissimilar alloys

Laser autogenous brazing – A new method for joining dissimilar metals

Gen Satoh; Y. Lawrence Yao

LIACP 1990; 315-324https://doi.org/10.2351/1.5062252

View Articletitled, Laser autogenous brazing – A new method for joining dissimilar metals

Study on laser brazing characteristics of dissimilar metals

Sook Hwan Kim; Y. Norman Zhou; Mok Young Lee; LiQun Li; Ali Nasiri

LIACP 1990; 325-332https://doi.org/10.2351/1.5062253

View Articletitled, Study on laser brazing characteristics of dissimilar metals

Recent developments in laser joining of dissimilar materials

Claus Thomy; Frank Vollertsen

LIACP 1990; 333-342https://doi.org/10.2351/1.5062254

View Articletitled, Recent developments in laser joining of dissimilar materials

Application of keyhole and heat-conduction modes to laser dissimilar metals welding of magnesium alloy and steel

Mohamed Wahba; Yousuke Kawahito; Seiji Katayama

LIACP 1990; 343-349https://doi.org/10.2351/1.5062255

View Articletitled, Application of keyhole and heat-conduction modes to laser dissimilar metals welding of magnesium alloy and steel

Dissimilar metal joining of magnesium alloy to zinc-coated steel by laser welding-brazing process

Liqun Li; Caiwang Tan; Yanbin Chen

LIACP 1990; 350-356https://doi.org/10.2351/1.5062257

View Articletitled, Dissimilar metal joining of magnesium alloy to zinc-coated steel by laser welding-brazing process

LMP 7: Modelling & Simulation

Modeling of real temporally variant beam shapes in laser materials processing

Jonathan Griffiths; Stuart P. Edwardson; Geoff Dearden; Ken G. Watkins

LIACP 1990; 357-360https://doi.org/10.2351/1.5062258

View Articletitled, Modeling of real temporally variant beam shapes in laser materials processing

Numerical simulation of heat transfer and fluid flow during laser metal wire deposition

Marcus Edstorp

LIACP 1990; 361-368https://doi.org/10.2351/1.5062259

View Articletitled, Numerical simulation of heat transfer and fluid flow during laser metal wire deposition

Contribution on modelling the remote ablation cutting

Jan Musiol; Michael F. Zaeh; Matthias R. Guertler

LIACP 1990; 369-377https://doi.org/10.2351/1.5062260

View Articletitled, Contribution on modelling the remote ablation cutting

A CFD model of laser cladding: From deposition head to melt pool dynamics

Juansethi Ibarra-Medina; Michael Vogel; Andrew J Pinkerton

LIACP 1990; 378-386https://doi.org/10.2351/1.5062261

View Articletitled, A CFD model of laser cladding: From deposition head to melt pool dynamics

2D finite element modeling of heat transfer and fluid flow during multilayered DMD laser process

Simon Morville; Muriel Carin; Denis Carron; Philippe Le Masson; Patrice Peyre; Myriam Gharbi; Cyril Gorny; Rémy Fabbro

LIACP 1990; 387-394https://doi.org/10.2351/1.5062262

View Articletitled, 2D finite element modeling of heat transfer and fluid flow during multilayered DMD laser process

LMP 8: Welding II

Stabilized copper welding by using power modulated green and IR laser beams

Andreas Heider; Axel Hess; Rudolf Weber; Thomas Graf

LIACP 1990; 395-402https://doi.org/10.2351/1.5062263

View Articletitled, Stabilized copper welding by using power modulated green and IR laser beams

Development of new processes for welding of thermal Al-Cu solar absorbers using diode lasers

Andre Springer; Peter Kallage; Michael Hustedt; Stephan Barcikowski; Volker Wesling; Heinz Haferkamp

LIACP 1990; 403-408https://doi.org/10.2351/1.5062264

View Articletitled, Development of new processes for welding of thermal Al-Cu solar absorbers using diode lasers

Modelled dependency of the direct absorption on the keyhole wall waviness during 1 micron-and 10 micron-laser welding

Alexander F. H. Kaplan

LIACP 1990; 409-417https://doi.org/10.2351/1.5062265

View Articletitled, Modelled dependency of the direct absorption on the keyhole wall waviness during 1 micron-and 10 micron-laser welding

Dependence of energy distribution in the keyhole on optical parameters of the focusing system in laser welding

Martin Sarbort; Libor Mrna; Simon Rerucha; Petr Jedlicka

LIACP 1990; 418-426https://doi.org/10.2351/1.5062270

View Articletitled, Dependence of energy distribution in the keyhole on optical parameters of the focusing system in laser welding

Distortion control during laser beam welding of shaft-hub joints within a process chain

Frank Buschenhenke; Thomas Seefeld; Frank Vollertsen

LIACP 1990; 427-434https://doi.org/10.2351/1.5062273

View Articletitled, Distortion control during laser beam welding of shaft-hub joints within a process chain

LMP 9: Laser Surface Modification I

Hardfacing using supersonic laser depostion of stellite-6

Rocco Lupoi; Andrew Cockburn; Martin Sparkes; Chris Bryan; Fang Luo; William O’Neill

LIACP 1990; 435-441https://doi.org/10.2351/1.5062274

View Articletitled, Hardfacing using supersonic laser depostion of stellite-6

A comparative study of 3D laser surface modification and the humping phenomenon

Caroline Earl; Paul Hilton; Jon Blackburn; Bill O’Neill

LIACP 1990; 442-450https://doi.org/10.2351/1.5062275

View Articletitled, A comparative study of 3D laser surface modification and the humping phenomenon

Feedback control of processing temperature in laser beam hardening of production dies

Hongping Gu; Boris Shulkin

LIACP 1990; 451-456https://doi.org/10.2351/1.5062276

View Articletitled, Feedback control of processing temperature in laser beam hardening of production dies

Thermal modification of zinc-aluminum coated steel using lasers

Remya Mathew; Paul Stoddart; David Nolan; Yvonne Durandet

LIACP 1990; 457-462https://doi.org/10.2351/1.5062277

View Articletitled, Thermal modification of zinc-aluminum coated steel using lasers

Laser heat treatment with latest system components

Steffen Bonss; Jan Hannweber; Udo Karsunke; Stefan Kuehn; Marko Seifert; Eckhard Beyer

LIACP 1990; 463-472https://doi.org/10.2351/1.5062278

View Articletitled, Laser heat treatment with latest system components

LMP 10: Laser Drilling

Drilling with fiber lasers

Jens Dietrich; Christoph Blaesius; Stefan Brief; Ingomar Kelbassa

LIACP 1990; 473-477https://doi.org/10.2351/1.5062279

View Articletitled, Drilling with fiber lasers

Recoil pressure and surface temperature in laser drilling

Matthieu Schneider; Jérémie Girardot; Laurent Berthe

LIACP 1990; 478-481https://doi.org/10.2351/1.5062280

View Articletitled, Recoil pressure and surface temperature in laser drilling

Parametric study of a laser-based hybrid drill for concrete

Shigeki Muto; Heizaburo Kato; Kazuya Masuda; Kazuyoku Tei; Tomoo Fujioka

LIACP 1990; 482-488https://doi.org/10.2351/1.5062281

View Articletitled, Parametric study of a laser-based hybrid drill for concrete

LMP 11: Laser Surface Modification II

New advances for laser adhesion test (lasat): From thick to thin coatings

Laurent Berthe; Michel Arrigoni; Michel Boustie; Jean-Paul Cuq-Lelandais; Cédric Broussillou; Grégory Fabre; Michel Jeandin; Vincent Guipont; Mariette Nivard

LIACP 1990; 489-495https://doi.org/10.2351/1.5062282

View Articletitled, New advances for laser adhesion test (lasat): From thick to thin coatings

Formation of metal matrix composites and intermetallic phases on aluminium AA1200 during laser alloying

Luyolo Mabhali; Sisa Pityana; Natasha Sacks

LIACP 1990; 496-502https://doi.org/10.2351/1.5062283

View Articletitled, Formation of metal matrix composites and intermetallic phases on aluminium AA1200 during laser alloying

Formation of metallic glass coatings via laser deposition

Hongqing Sun; Katharine M. Flores

LIACP 1990; 503-510https://doi.org/10.2351/1.5062284

View Articletitled, Formation of metallic glass coatings via laser deposition

LMP 12: Laser Processing of CFRP

Investigations in remote cutting of carbon fiber composite materials

Annett Klotzbach; Pierpaolo Vessio; Udo Klotzbach; Jan Hauptmann

LIACP 1990; 511-515https://doi.org/10.2351/1.5062286

View Articletitled, Investigations in remote cutting of carbon fiber composite materials

Evaluation of a novel process for an in-situ sealing of the cutting edge during laser cutting of carbon fiber reinforced plastics (CFRP)

S. Bastick; P. Jaeschke; F. Völkermeyer; C. Nölke; F. Fischer; U. Stute; D. Kracht

LIACP 1990; 516-522https://doi.org/10.2351/1.5062287

View Articletitled, Evaluation of a novel process for an in-situ sealing of the cutting edge during laser cutting of carbon fiber reinforced plastics (CFRP)

Analysis of thermal damage in laser processing of CFRP

R. Weber; M. Hafner; A. Michalowski; P. Mucha; T. Graf

LIACP 1990; 523-528https://doi.org/10.2351/1.5062288

View Articletitled, Analysis of thermal damage in laser processing of CFRP

LMP 13: Welding III

Experimental and numerical investigation of laser-welding of long fiber thermoplastic composite

Oumarou M. Mamane; Knapp Wolfgang; Clement Sebastien; Renard Jacques; Jeulin Dominique

LIACP 1990; 529-535https://doi.org/10.2351/1.5062289

View Articletitled, Experimental and numerical investigation of laser-welding of long fiber thermoplastic composite

Single mode fiber laser beam welding with superposed beam oscillation

Markus Schweier; Jens Hatwig; Michael F. Zaeh; Johannes Reppich

LIACP 1990; 536-546https://doi.org/10.2351/1.5062290

View Articletitled, Single mode fiber laser beam welding with superposed beam oscillation

Pulsed laser net-shaped welding of thin hastelloy C-276

Dongjiang Wu; Guangyi Ma; Yuquan Guo; Dongming Guo

LIACP 1990; 547-551https://doi.org/10.2351/1.5062291

View Articletitled, Pulsed laser net-shaped welding of thin hastelloy C-276

The effect of adhesive properties on laser spot weld bonding

Yanbin Chen; Wang Tao; Yinan Ma; Mingmao Wang; Liqun Li

LIACP 1990; 552-559https://doi.org/10.2351/1.5062292

View Articletitled, The effect of adhesive properties on laser spot weld bonding

LMP 14: Laser Metal Deposition (LMD): Process I

Characterization of micro/macrostructure of laser cladded Inconel 718 with increased deposition rates as related to the mechanical properties

Johannes Witzel; Salay Stannard; Andres Gasser; Ingomar Kelbassa

LIACP 1990; 560-566https://doi.org/10.2351/1.5062293

View Articletitled, Characterization of micro/macrostructure of laser cladded Inconel 718 with increased deposition rates as related to the mechanical properties

Influence of process parameters and energy density on the microstructure of Ti-6Al-4V wire/wc powder cladding

Peter Farayibi; Janet Folkes; Adam Clare

LIACP 1990; 567-576https://doi.org/10.2351/1.5062294

View Articletitled, Influence of process parameters and energy density on the microstructure of Ti-6Al-4V wire/wc powder cladding

Laser-based remanufacturing of engineering components and its environmental impact analysis

J. Michael Wilson; Cecil Piya; Vance Murray; Yung Shin; Fu Zhao; Karthik Ramani

LIACP 1990; 577-586https://doi.org/10.2351/1.5062295

View Articletitled, Laser-based remanufacturing of engineering components and its environmental impact analysis

LMP 15: Hybrid & Combination Processes

Hybrid welding with controlled short arcs - A variation of the reduction of the energy-per-unit length

Uwe Reisgen; Simon Olschok; Michael Mavany

LIACP 1990; 587-591https://doi.org/10.2351/1.5062296

View Articletitled, Hybrid welding with controlled short arcs - A variation of the reduction of the energy-per-unit length

Laser-GMA hybrid welding of 960 MPa steels

J. Siltanen; J. Kömi; R. Laitinen; M. Lehtinen; S. Tihinen; U. Jasnau; A. Sumpf

LIACP 1990; 592-598https://doi.org/10.2351/1.5062297

View Articletitled, Laser-GMA hybrid welding of 960 MPa steels

Effect of arc parameters in high brightness hybrid laser arc welding of low alloyed steel

Esa Lappalainen; Tuomas Purtonen; Antti Salminen

LIACP 1990; 599-605https://doi.org/10.2351/1.5062298

View Articletitled, Effect of arc parameters in high brightness hybrid laser arc welding of low alloyed steel

Bifocal hybrid laser welding - Fillet welds of aluminium

M. R. Kronthaler; S. Spengler; M. F. Zaeh

LIACP 1990; 606-611https://doi.org/10.2351/1.5062299

View Articletitled, Bifocal hybrid laser welding - Fillet welds of aluminium

Orbital cutting and welding of stainless steel tubes with a fiber laser

Mikko Vänskä; Tuomas Purtonen; Antti Salminen

LIACP 1990; 612-620https://doi.org/10.2351/1.5062301

View Articletitled, Orbital cutting and welding of stainless steel tubes with a fiber laser

LMP 16: Welding IV

Influence of ambient pressure on spattering and weld seam quality in laser beam welding with the solid-state laser

Christian Börner; Klaus Dilger; Volker Rominger; Thomas Harrer; Thomas Krüssel; Thorsten Löwer

LIACP 1990; 621-629https://doi.org/10.2351/1.5062302

View Articletitled, Influence of ambient pressure on spattering and weld seam quality in laser beam welding with the solid-state laser

Characteristics of microstructures and mechanical properties of laser welded API X-100 steel for line pipe

Mok-Young Lee; Hyun-Byung Chai

LIACP 1990; 630-636https://doi.org/10.2351/1.5062303

View Articletitled, Characteristics of microstructures and mechanical properties of laser welded API X-100 steel for line pipe

Experimental investigation of the laser-plume interaction during high power fiber laser welding

Pavel Shcheglov; Andrey Gumenyuk; Igor Gornushkin; Michael Rethmeier

LIACP 1990; 637-645https://doi.org/10.2351/1.5062304

View Articletitled, Experimental investigation of the laser-plume interaction during high power fiber laser welding

Instructions for using weld strength for laser welding of hot-press-forming steel

Minjung Kang; Cheolhee Kim; Jongsup Lee

LIACP 1990; 646-651https://doi.org/10.2351/1.5062305

View Articletitled, Instructions for using weld strength for laser welding of hot-press-forming steel

Preliminary investigation on hybrid welding of selective laser molten parts

Sabina Luisa Campanelli; Giuseppe Casalino; Nicola Contuzzi; Andrea Angelastro; Antonio Domenico Ludovico

LIACP 1990; 652-660https://doi.org/10.2351/1.5062306

View Articletitled, Preliminary investigation on hybrid welding of selective laser molten parts

Deep penetration welds and welding phenomena with combined disk lasers

Seiji Katayama; Masahiro Hirayama; Masami Mizutani; Yousuke Kawahito

LIACP 1990; 661-668https://doi.org/10.2351/1.5062307

View Articletitled, Deep penetration welds and welding phenomena with combined disk lasers

Deep penetration welding with high power disk lasers in low vacuum

Seiji Katayama; Yohei Abe; Ryoji Ido; Masami Mizutani; Yousuke Kawahito

LIACP 1990; 669-678https://doi.org/10.2351/1.5062308

View Articletitled, Deep penetration welding with high power disk lasers in low vacuum

LMP 17: Laser Metal Deposition (LMD): Process II

Laser cladding of metal-ceramic nanocomposite layers for cutting applications

Sabine Claussen; Albert Grueninger; Michael Hustedt; Stephan Barcikowski; Volker Wesling; Heinz Haferkamp

LIACP 1990; 679-682https://doi.org/10.2351/1.5062309

View Articletitled, Laser cladding of metal-ceramic nanocomposite layers for cutting applications

Effect of C:Ti atomic ratio on TiC morphology deposited by laser cladding process

Ali Emamian; Stephen F.Corbin; Amir Khajepour

LIACP 1990; 683-686https://doi.org/10.2351/1.5062310

View Articletitled, Effect of C:Ti atomic ratio on TiC morphology deposited by laser cladding process

Influence of process conditions on surface finishes obtained with the direct metal deposition laser technique

Myriam Gharbi; Patrice Peyre; Cyril Gorny; Rémy Fabbro; Simon Morville; Muriel Carin; Thierry Malot

LIACP 1990; 687-694https://doi.org/10.2351/1.5062311

View Articletitled, Influence of process conditions on surface finishes obtained with the direct metal deposition laser technique

Material-efficient laser cladding for corrosion resistance

Khalid Mahmood; Nicholas Stevens; Waheed Ul Haq Syed; Andrew J. Pinkerton

LIACP 1990; 695-704https://doi.org/10.2351/1.5062312

View Articletitled, Material-efficient laser cladding for corrosion resistance

Laser direct deposition of nickel-based metal matrix composite

Kevin C. Schoeffel; Yung C. Shin

LIACP 1990; 705-710https://doi.org/10.2351/1.5062314

View Articletitled, Laser direct deposition of nickel-based metal matrix composite

Laser cladding of Zr₆₀Ti₆Cu₁₉Fe₅Al₁₀ amorphous alloy on AZ31B magnesium alloy

Xue Liu; Sen Yang

LIACP 1990; 711-714https://doi.org/10.2351/1.5062315

View Articletitled, Laser cladding of Zr<sub>60</sub>Ti<sub>6</sub>Cu<sub>19</sub>Fe<sub>5</sub>Al<sub>10</sub> amorphous alloy on AZ31B magnesium alloy

Influence of powder characteristics in additive laser manufacturing of SS 316L metallic parts

Didier Boisselier; Simon Sankaré

LIACP 1990; 715-724https://doi.org/10.2351/1.5062316

View Articletitled, Influence of powder characteristics in additive laser manufacturing of SS 316L metallic parts

COAX_ID – omni-directional inner diameter laser cladding optic

Frank Kubisch; Steffen Nowotny; Christoph Leyens; Eckhard Beyer; Anja Techel

LIACP 1990; 725-728https://doi.org/10.2351/1.5062318

View Articletitled, COAX<sub>ID</sub> – omni-directional inner diameter laser cladding optic

LMP 18: High Brightness Laser Challenges

Reference process for determination of thermal focus shift

Axel Hess; Rudolf Weber; Thomas Graf; Marcel Schäfer; Christiane Thiel1

LIACP 1990; 729-734https://doi.org/10.2351/1.5062319

View Articletitled, Reference process for determination of thermal focus shift

Thermal management to reduce focus shift using ZnS MS optics

Stephen Rummel; Gary Herrit; Alan Hedges; Fred Kropf

LIACP 1990; 735-740https://doi.org/10.2351/1.5062320

View Articletitled, Thermal management to reduce focus shift using ZnS MS optics

Thermal lensing measurement of a thermal lens compensation high power laser objective

Michael Scaggs; Gil Haas

LIACP 1990; 741-748https://doi.org/10.2351/1.5062321

View Articletitled, Thermal lensing measurement of a thermal lens compensation high power laser objective

High power disk lasers – Advances & applications

David Havrilla; Tracey Ryba; Marco Holzer

LIACP 1990; 749-755https://doi.org/10.2351/1.5062322

View Articletitled, High power disk lasers – Advances & applications

Wavelength dependency in high power laser cutting & welding

David Havrilla; Stephan Ziermann; Marco Holzer

LIACP 1990; 756-760https://doi.org/10.2351/1.5062323

View Articletitled, Wavelength dependency in high power laser cutting & welding

An efficient method for enhancing the filling factor of the aperture for coherent-beaming-combining (CBC) using thin-film coated glass

Si-si Zhao; Zheng-yu Ye; Zhi-yong Wang

LIACP 1990; 761-764https://doi.org/10.2351/1.5062324

View Articletitled, An efficient method for enhancing the filling factor of the aperture for coherent-beaming-combining (CBC) using thin-film coated glass

LASER SAFETY SCIENTIFIC SESSIONS

“Dazzling and high-powered laser pointers”

Leon N. McLin

LIACP 1990; 52-59https://doi.org/10.2351/1.5056769

View Articletitled, “Dazzling and high-powered laser pointers”

Orientation guide for laser safety standard users

Werner Horak; Ronald Neuhaus

LIACP 1990; 62-68https://doi.org/10.2351/1.5056770

View Articletitled, Orientation guide for laser safety standard users

IEC TR 60825-5 Ed. 3.0 manufacturer’s checklist – A guide for manufacturers documenting compliance with IEC 60825-1:2007

Woody Strzelecki

LIACP 1990; 69-71https://doi.org/10.2351/1.5056771

View Articletitled, IEC TR 60825-5 Ed. 3.0 manufacturer’s checklist – A guide for manufacturers documenting compliance with IEC 60825-1:2007

The widely varying risk from class 3R laser products in light of the revision of IEC 60825-1

Karl Schulmeister

LIACP 1990; 72-75https://doi.org/10.2351/1.5056772

View Articletitled, The widely varying risk from class 3R laser products in light of the revision of IEC 60825-1

Lessons learned from a recent laser accident

Michael Woods

LIACP 1990; 78-84https://doi.org/10.2351/1.5056773

View Articletitled, Lessons learned from a recent laser accident

On the job training, hit or miss

Ken Barat

LIACP 1990; 85-86https://doi.org/10.2351/1.5056774

View Articletitled, On the job training, hit or miss

Competence in laser safety

Lan Gillett

LIACP 1990; 87-91https://doi.org/10.2351/1.5056775

View Articletitled, Competence in laser safety

Laser safety: A laser alignment practical training course

Michael Woods; Steve Edstrom

LIACP 1990; 92-97https://doi.org/10.2351/1.5056776

View Articletitled, Laser safety: A laser alignment practical training course

“Team time out” – Competition of safety regulations in the operation theatre

H.-Peter Berlien; Ute Mueller

LIACP 1990; 99-100https://doi.org/10.2351/1.5056777

View Articletitled, “Team time out” – Competition of safety regulations in the operation theatre

Novel software platform for advanced optical radiation safety analysis

Simon Hall; Neil Haigh

LIACP 1990; 102-111https://doi.org/10.2351/1.5056730

View Articletitled, Novel software platform for advanced optical radiation safety analysis

How to select laser protective eyewear

Christine L. Stanley; James B. Sheehy, PhD

LIACP 1990; 113-115https://doi.org/10.2351/1.5056731

View Articletitled, How to select laser protective eyewear

Determining laser eye protection (LEP) acceptability for color appearance by comparing two prediction metrics: E-94 score and color zone analysis (CZA)

Semih Kumru; Leedjia Svec; Martin LaFrance; Dave Freeman; Thomas Kuyk; William Brockmeier

LIACP 1990; 117-119https://doi.org/10.2351/1.5056732

View Articletitled, Determining laser eye protection (LEP) acceptability for color appearance by comparing two prediction metrics: E-94 score and color zone analysis (CZA)

An international standard for laser eye protection

Roy Henderson

LIACP 1990; 120-122https://doi.org/10.2351/1.5056733

View Articletitled, An international standard for laser eye protection

Laser dyes and solvents

Sharli Frederiksen, CSP, CMLSO

LIACP 1990; 124-126https://doi.org/10.2351/1.5056734

View Articletitled, Laser dyes and solvents

Analysis and mitigation of X-ray hazard generated from high intensity laser-target interactions

R. Qiu; J. C. Liu; A. A. Prinz; S. H. Rokni; M. Woods; Z. Xia

LIACP 1990; 127-135https://doi.org/10.2351/1.5056735

View Articletitled, Analysis and mitigation of X-ray hazard generated from high intensity laser-target interactions

Control of non-beam hazards under IEC TR 60825-14

Roy Henderson

LIACP 1990; 136-139https://doi.org/10.2351/1.5056736

View Articletitled, Control of non-beam hazards under IEC TR 60825-14

Administrative and engineering controls for high power lasers in lab, ground, sea and air

David Burchman; James Hall; David Han; Dan Seaman

LIACP 1990; 141-146https://doi.org/10.2351/1.5056737

View Articletitled, Administrative and engineering controls for high power lasers in lab, ground, sea and air

Why new test conditions for laser guard

Joachim Franek; Erwin Martin Heberer; Andreas Trautmann

LIACP 1990; 147-153https://doi.org/10.2351/1.5056738

View Articletitled, Why new test conditions for laser guard

Beam quality control and consistent safety standard for high power laser products

Hong Chen; Xubao Wang

LIACP 1990; 154-157https://doi.org/10.2351/1.5056739

View Articletitled, Beam quality control and consistent safety standard for high power laser products

Maintaining laser safety during commissioning of the orion high intensity laser facility

Steve Melton; Graham White

LIACP 1990; 160-166https://doi.org/10.2351/1.5056740

View Articletitled, Maintaining laser safety during commissioning of the orion high intensity laser facility

Principles for safe exposures to lasers in human subjects for non-therapeutic research

Peter A. Smith; Brian K. Foutch; Leon N. McLin

LIACP 1990; 167-171https://doi.org/10.2351/1.5056741

View Articletitled, Principles for safe exposures to lasers in human subjects for non-therapeutic research

Manufacturing and approval requirement differences between FDA/CDRH and the DoD

Richard Kice; Nick Schaaf; David Broadwater; Annamaria Vesely; Wallace Mitchell; Harvey Hodnett; Baxter Newton; Robert Aldrich; Wes Marshall

LIACP 1990; 172-175https://doi.org/10.2351/1.5056742

View Articletitled, Manufacturing and approval requirement differences between FDA/CDRH and the DoD

Led safety in toys

Michael Higlett; Marina Khazova; John O’Hagan

LIACP 1990; 176-181https://doi.org/10.2351/1.5056743

View Articletitled, Led safety in toys

Retinal damage in the 1 ns to 100 ns exposure duration range

Brian J. Lund; David J. Lund; Peter R. Edsall; Martin L. Holmes

LIACP 1990; 183-186https://doi.org/10.2351/1.5056744

View Articletitled, Retinal damage in the 1 ns to 100 ns exposure duration range

Characterizing temperature-dependent photo-oxidation to explain the abrupt transition from thermal to non-thermal laser damage mechanisms at 413 nm

Michael L. Denton; C.D. Clark, III; Gary D. Noojin; Kurt J. Schuster; Curtis W. Burney; Benjamin A. Rockwell; Robert J. Thomas

LIACP 1990; 187-190https://doi.org/10.2351/1.5056745

View Articletitled, Characterizing temperature-dependent photo-oxidation to explain the abrupt transition from thermal to non-thermal laser damage mechanisms at 413 nm

Minimum visible lesion (MVL) thresholds in cynomolgus (Macaca fasicularis) retina resulting from laser exposure at wavelengths of 413-nm, 532-nm and 647-nm

Jeffrey W. Oliver; Benjamin A. Rockwell; Semih S. Kumru; Clifton D. Clark; Harvey M. Hodnett; Gary D. Noojin; Kurt J. Schuster; David J. Stolarski

LIACP 1990; 191-195https://doi.org/10.2351/1.5056746

View Articletitled, Minimum visible lesion (MVL) thresholds in cynomolgus (Macaca fasicularis) retina resulting from laser exposure at wavelengths of 413-nm, 532-nm and 647-nm

Skin damage thresholds with continuous-wave laser exposures at near infrared wavelengths

Jeffrey W. Oliver; Corey A. Harbert; Harvey M. Hodnett; Gary D. Noojin; Kurt J. Schuster; Aurora D. Shingledecker; David J. Stolarski

LIACP 1990; 196-199https://doi.org/10.2351/1.5056747

View Articletitled, Skin damage thresholds with continuous-wave laser exposures at near infrared wavelengths

Manifestation of the strong non-linearity of thermal injury

Karl Schulmeister; Mathieu Jean

LIACP 1990; 201-204https://doi.org/10.2351/1.5056748

View Articletitled, Manifestation of the strong non-linearity of thermal injury

Predicted multiple-pulse thermal damage thresholds and exposure limits

C.D. Clark, III; Robert J. Thomas

LIACP 1990; 205-209https://doi.org/10.2351/1.5056749

View Articletitled, Predicted multiple-pulse thermal damage thresholds and exposure limits

Spatially-correlated microthermography maps threshold temperature in laser-induced damage

Michael L. Denton; Gary D. Noojin; C. D. Clark, III; Michael S. Foltz; Larry E. Estlack; Benjamin A. Rockwell; Robert J. Thomas

LIACP 1990; 210-213https://doi.org/10.2351/1.5056750

View Articletitled, Spatially-correlated microthermography maps threshold temperature in laser-induced damage

Modelling of laser induced injury of the cornea

Karl Schulmeister; Mathieu Jean

LIACP 1990; 214-217https://doi.org/10.2351/1.5056751

View Articletitled, Modelling of laser induced injury of the cornea

Assessing the safety of entertainment lighting

John O’Hagan; Marina Khazova; Ron Bonner

LIACP 1990; 219-224https://doi.org/10.2351/1.5056752

View Articletitled, Assessing the safety of entertainment lighting

Remote viewing no longer a nice to do

Ken Barat

LIACP 1990; 225-229https://doi.org/10.2351/1.5056753

View Articletitled, Remote viewing no longer a nice to do

Assessing audience exposure at laser shows

Michael Higlett; John O’Hagan

LIACP 1990; 231-237https://doi.org/10.2351/1.5056754

View Articletitled, Assessing audience exposure at laser shows

Matilda: A laser range hazard assessment utility

Brian K. Flemming; Daniel F. Huantes; Paul K. Kennedy

LIACP 1990; 239-248https://doi.org/10.2351/1.5056755

View Articletitled, Matilda: A laser range hazard assessment utility

Blue light hazard evaluation based on the luminance of light sources

Jian Zheng; Junkai Li; Tongsheng Mou

LIACP 1990; 250-253https://doi.org/10.2351/1.5056756

View Articletitled, Blue light hazard evaluation based on the luminance of light sources

Expected changes for the retinal thermal exposure limits for broadband incoherent radiation of IEC 62471 and ICNIRP

Karl Schulmeister

LIACP 1990; 255-257https://doi.org/10.2351/1.5056757

View Articletitled, Expected changes for the retinal thermal exposure limits for broadband incoherent radiation of IEC 62471 and ICNIRP

The standardization and regulation of photobiological safety for non-laser sources in China

Jianping Wang; Junkai Li; Mou Tongsheng

LIACP 1990; 258-260https://doi.org/10.2351/1.5056758

View Articletitled, The standardization and regulation of photobiological safety for non-laser sources in China

An audit of laser safety in universities: A comparison to medical laser safety

Stanley Batchelor; Sharmila Franks; Graham Hart

LIACP 1990; 262-268https://doi.org/10.2351/1.5056759

View Articletitled, An audit of laser safety in universities: A comparison to medical laser safety

Hidden menace: Recognizing and controlling the hazards posed by smaller and lower power lasers

Samuel M. Goldwasser; Ben Edwards

LIACP 1990; 269-274https://doi.org/10.2351/1.5056760

View Articletitled, Hidden menace: Recognizing and controlling the hazards posed by smaller and lower power lasers

Laser safety program at the University of Toronto

Sandu Sonoc

LIACP 1990; 275-278https://doi.org/10.2351/1.5056761

View Articletitled, Laser safety program at the University of Toronto

Laser accidents: A fifty-year review of medical and non-medical exposure C101

William J. Ertle; Kevin M. Donnelly; C. Eugene Moss

LIACP 1990; 280-283https://doi.org/10.2351/1.5056762

View Articletitled, Laser accidents: A fifty-year review of medical and non-medical exposure C101

Proposed changes of the retinal thermal MPES

Karl Schulmeister

LIACP 1990; 284-285https://doi.org/10.2351/1.5056763

View Articletitled, Proposed changes of the retinal thermal MPES

Building a laser safety culture

Ken Barat

LIACP 1990; 287-290https://doi.org/10.2351/1.5056764

View Articletitled, Building a laser safety culture

POSTER PRESENTATION

A green laser pointer hazard

Jemellie Galang; Alessandro Restelli; Edward W. Hagley; Joshua Hadler; Charles W. Clark

LIACP 1990; 296-300https://doi.org/10.2351/1.5056767

View Articletitled, A green laser pointer hazard

LASER MICROPROCESSING CONFERENCE

LMF 1: Drilling & Micromachining I

Effects of peak power and multipulsing on drilling and marking with ns pulses

Sami T. Hendow

LIACP 1990; 765-772https://doi.org/10.2351/1.5062325

View Articletitled, Effects of peak power and multipulsing on drilling and marking with ns pulses

Micro processing of metals using a high repetition rate femtosecond laser: from laser process parameter study to machining examples

J. Schille; L. Schneider; U. Loeschner; R. Ebert; P. Scully; N. Goddard; B. Steiger; H. Exner

LIACP 1990; 773-782https://doi.org/10.2351/1.5062326

View Articletitled, Micro processing of metals using a high repetition rate femtosecond laser: from laser process parameter study to machining examples

Processing of industrially relevant non metals with laser pulses in the range between 10ps and 50ps

Beat Neuenschwander; Beat Jäggi; Marc Schmid; Urs Hunziker; Beat Lüescher; Carmine Nocera

LIACP 1990; 783-791https://doi.org/10.2351/1.5062327

View Articletitled, Processing of industrially relevant non metals with laser pulses in the range between 10ps and 50ps

High power fiber laser on-the-fly drilling of thin materials

Henrikki Pantsar; Petri Koivunen; Ville Lampinen; Hannu Väisänen; Mikko Laaksonen

LIACP 1990; 792-797https://doi.org/10.2351/1.5062328

View Articletitled, High power fiber laser on-the-fly drilling of thin materials

Laser milling: Tool making capabilities

Stefan Dimov; Petko Petkov; Franck Lacan; Steffen Scholz

LIACP 1990; 798-807https://doi.org/10.2351/1.5062329

View Articletitled, Laser milling: Tool making capabilities

LMF 2: Microjoining

Flexible and efficient laser remote welding of ultra-thin metal foils

Andreas Patschger; Matthias Hild; Jean Pierre Bergmann; Jens Bliedtner

LIACP 1990; 808-816https://doi.org/10.2351/1.5062330

View Articletitled, Flexible and efficient laser remote welding of ultra-thin metal foils

Prospects of welding foils with solid state laser for lithium-ion batteries

Renald Schedewy; Eckhard Beyer; Berndt Brenner; Jens Standfuss

LIACP 1990; 817-824https://doi.org/10.2351/1.5062332

View Articletitled, Prospects of welding foils with solid state laser for lithium-ion batteries

Welding characteristics of aluminum alloy by pulsed Nd:YAG laser with pre-and post-irradiation of superposed continuous diode laser

Shin-ichi Nakashiba; Yasuhiro Okamoto; Tomokazu Sakagawa; Kazuya Miura; Akira Okada; Yoshiyuki Uno

LIACP 1990; 825-832https://doi.org/10.2351/1.5062333

View Articletitled, Welding characteristics of aluminum alloy by pulsed Nd:YAG laser with pre-and post-irradiation of superposed continuous diode laser

Parameter study on laser welding of nitinol wire by Taguchi method

C. W. Chan; H. C. Man; T. M. Yue

LIACP 1990; 833-838https://doi.org/10.2351/1.5062334

View Articletitled, Parameter study on laser welding of nitinol wire by Taguchi method

Effect of variable power control in quasi-simultaneous fiber laser welding of polymers

Petri Laakso; Saara Ruotsalainen; Tuomas Purtonen; Mikko Rikkonen; Antti Salminen; Veli Kujanpää

LIACP 1990; 839-845https://doi.org/10.2351/1.5062335

View Articletitled, Effect of variable power control in quasi-simultaneous fiber laser welding of polymers

LMF 3: Photovoltaics

Back end monolithic series interconnection of a thin film pv module by laser scribing and screen printing

Johan Bosman; Corné De Kok; Jochen Löffler; Laurie Wipliez; Martijn De Keijzer; Wim Soppe

LIACP 1990; 846-850https://doi.org/10.2351/1.5062336

View Articletitled, Back end monolithic series interconnection of a thin film pv module by laser scribing and screen printing

Laser induced backside etching of solar glass by 1064nm fiber laser irradiation

Chao He; Furong Liu; Jianwen Yuan; Jimin Chen

LIACP 1990; 851-855https://doi.org/10.2351/1.5062337

View Articletitled, Laser induced backside etching of solar glass by 1064nm fiber laser irradiation

Micromachining PV materials with time domain tailored laser pulses

M. Rekow; R. Murison; C. Dinkel; T. Panarello; S. Nikumb; W. S. Sampath

LIACP 1990; 856-861https://doi.org/10.2351/1.5062338

View Articletitled, Micromachining PV materials with time domain tailored laser pulses

Patterning and marking of textured and untextured silicon solar cells using a 532 nm picosecond fiber laser

Tim D. Gerke; Brian Baird

LIACP 1990; 862-868https://doi.org/10.2351/1.5062340

View Articletitled, Patterning and marking of textured and untextured silicon solar cells using a 532 nm picosecond fiber laser

Femtosecond laser patterning of Mo thin film on flexible substrate for CIGS solar cells

Qiumei Bian; Xiaoming Yu; Baozhen Zhao; Zenghu Chang; Shuting Lei

LIACP 1990; 869-874https://doi.org/10.2351/1.5062341

View Articletitled, Femtosecond laser patterning of Mo thin film on flexible substrate for CIGS solar cells

LMF 4: Laser Sources for Microprocessing

Ultrafast laser with high energy and high average power for industrial micromachining: Comparison ps-fs

John Lopez; Anne Lidolff; Martin Delaigue; Clemens Hönninger; Sandrine Ricaud; Eric Mottay

LIACP 1990; 875-881https://doi.org/10.2351/1.5062342

View Articletitled, Ultrafast laser with high energy and high average power for industrial micromachining: Comparison ps-fs

Flexible and precise material processing with femtosecond disc lasers

Steffen Sommer; Friedrich Dausinger

LIACP 1990; 882-886https://doi.org/10.2351/1.5062343

View Articletitled, Flexible and precise material processing with femtosecond disc lasers

LMF 5: Drilling and Micromachining II

Micromachining on thermal barrier coated supperalloy using a nanosecond fiber laser

Hongkun Lai; Huan Qi; Xinyang Shao; Yuezhou Wang; Jiayi Ding; Chuming Zhao

LIACP 1990; 887-894https://doi.org/10.2351/1.5062344

View Articletitled, Micromachining on thermal barrier coated supperalloy using a nanosecond fiber laser

Stability limits of laser drilled hole arrays on large areas

Nelli Hambach; Claudia Hartmann; Jens Holtkamp; Arnold Gillner

LIACP 1990; 895-899https://doi.org/10.2351/1.5062345

View Articletitled, Stability limits of laser drilled hole arrays on large areas

Experimental study of producing non-tapered holes using a high peak power pulsed Nd:YAG laser

Li Qiang; Jiang Meng-hua; Lei Hong; Wang Jin-Guo; Hui Yong-ling

LIACP 1990; 900-905https://doi.org/10.2351/1.5062346

View Articletitled, Experimental study of producing non-tapered holes using a high peak power pulsed Nd:YAG laser

Laser ablation: Optimising material removal rate with limited oxidation of Ti6Al4V

S Davies; J Kell; M. C Kong; D Axinte; K Perkins

LIACP 1990; 906-913https://doi.org/10.2351/1.5062347

View Articletitled, Laser ablation: Optimising material removal rate with limited oxidation of Ti6Al4V

A study of laser albation near the critical point

Hyungson Ki

LIACP 1990; 914-916https://doi.org/10.2351/1.5062348

View Articletitled, A study of laser albation near the critical point

LMF 6: Laser Optics and Applications

Ultra-short pulse laser micro-machining of metals with radial and azimuthal polarization

O. J. Allegre; W. Perrie; S. P. Edwardson; G. Dearden; K. G. Watkins

LIACP 1990; 917-925https://doi.org/10.2351/1.5062349

View Articletitled, Ultra-short pulse laser micro-machining of metals with radial and azimuthal polarization

Efficient use of short pulse width laser for maximum material removal rate

Ashwini Tamhankar; Rajesh Patel

LIACP 1990; 926-932https://doi.org/10.2351/1.5062350

View Articletitled, Efficient use of short pulse width laser for maximum material removal rate

Large-area production of dynamically scaled microstructures using diffractive optical elements

Bodo Wojakowski; Ulrich Klug; Rainer Kling

LIACP 1990; 933-940https://doi.org/10.2351/1.5062351

View Articletitled, Large-area production of dynamically scaled microstructures using diffractive optical elements

Applying of refractive spatial beam shapers with scanning optics

Alexander Laskin; Vadim Laskin

LIACP 1990; 941-947https://doi.org/10.2351/1.5062352

View Articletitled, Applying of refractive spatial beam shapers with scanning optics

On-target fluence variation in a multi-magnification laser ablation system

Chen-Hsiung Cheng; Sergey Broude

LIACP 1990; 948-953https://doi.org/10.2351/1.5062353

View Articletitled, On-target fluence variation in a multi-magnification laser ablation system

A novel laser trepanning system for research and production

David Ashkenasi; Tristan Kaszemeikat; Norbert Mueller; Reinhard Dietrich; Daniel Jahns; Gerd Illing; Hans Joachim Eichler; Tino Petsch; Jens Hänel; Christian Scholz

LIACP 1990; 954-961https://doi.org/10.2351/1.5062354

View Articletitled, A novel laser trepanning system for research and production

LMF 7: Monitoring Detection and Adjustment

Laser micro-adjustment using ultra-short pulses

Jonathan Griffiths; Stuart P Edwardson; Geoff Dearden; Ken G Watkins

LIACP 1990; 962-965https://doi.org/10.2351/1.5062356

View Articletitled, Laser micro-adjustment using ultra-short pulses

Acoustical focal positioning for micromachining using a picosecond pulsed UV-laser

Volker Schulze; Patricia Weber

LIACP 1990; 966-971https://doi.org/10.2351/1.5062357

View Articletitled, Acoustical focal positioning for micromachining using a picosecond pulsed UV-laser

Investigation of low nanosecond light-matter interaction mechanisms

Krste Pangovski; Kun Li; Bill O’Neill, Dr.

LIACP 1990; 972-981https://doi.org/10.2351/1.5062358

View Articletitled, Investigation of low nanosecond light-matter interaction mechanisms

Direct in-situ measurement of the ablation rate in short pulse laser percussion drilling of metal targets

Francesco Paolo Mezzapesa; Antonio Ancona; Teresa Sibillano; Francesca di Niso; Francesco de Lucia; Maurizio Dabbicco; Pietro Mario Lugarà; Gaetano Scamarcio

LIACP 1990; 982-986https://doi.org/10.2351/1.5062359

View Articletitled, Direct in-situ measurement of the ablation rate in short pulse laser percussion drilling of metal targets

Drawing electronic circuits – The production of electronic components with embedded direct written circuits using holographic beam manipulation

Shuai Hou; John Tyrer

LIACP 1990; 987-992https://doi.org/10.2351/1.5062360

View Articletitled, Drawing electronic circuits – The production of electronic components with embedded direct written circuits using holographic beam manipulation

Development of non-planar interconnects for double-sided flexible copper substrates using laser assisted maskless microdeposition processes

Steven Tong; Elahe Jabari; Hamidreza Alemohammad; Ehsan Toyserkani

LIACP 1990; 993-999https://doi.org/10.2351/1.5062361

View Articletitled, Development of non-planar interconnects for double-sided flexible copper substrates using laser assisted maskless microdeposition processes

LMF 8: Laser Microdeposition Processes

Novel method of pulsed laser deposition using liquid flow target

Masahito Katto; Masanori Kaku; Shoichi Kubodera; Atsushi Yakotani

LIACP 1990; 1000-1004https://doi.org/10.2351/1.5062170

View Articletitled, Novel method of pulsed laser deposition using liquid flow target

Laser-based manufacturing of metallic conducting paths

Christian Vedder; Jochen Stollenwerk; Norbert Pirch; Konrad Wissenbach

LIACP 1990; 1005-1009https://doi.org/10.2351/1.5062171

View Articletitled, Laser-based manufacturing of metallic conducting paths

Sensitivity analysis of fiber bragg grating sensors coated by metal films produced by the laser-assisted maskless microdeposition process

Xixi Zhang; Hamidreza Alemohammad; Ehsan Toyserkani

LIACP 1990; 1010-1015https://doi.org/10.2351/1.5062172

View Articletitled, Sensitivity analysis of fiber bragg grating sensors coated by metal films produced by the laser-assisted maskless microdeposition process

LMF 9: Thin Film Processing

Patterning of organic, electronic devices using a high average power picosecond laser

Colin Moorhouse; Dimitris Karnakis; Rajesh Mandamparambil

LIACP 1990; 1016-1021https://doi.org/10.2351/1.5062173

View Articletitled, Patterning of organic, electronic devices using a high average power picosecond laser

Selective removal of transparent conductive oxide layers with ultrashort laser pulses: Front- vs. back-side ablation

Victor V. Matylitsky; Heinz Huber; Daniel Kopf

LIACP 1990; 1022-1027https://doi.org/10.2351/1.5062174

View Articletitled, Selective removal of transparent conductive oxide layers with ultrashort laser pulses: Front- vs. back-side ablation

Effect of hydrogen on surface texturing and crystallization on a-Si:H thin film irradiated by excimer laser

Hongliang Wang; Fernando Lusquiños; Y. Lawrence Yao

LIACP 1990; 1028-1037https://doi.org/10.2351/1.5062175

View Articletitled, Effect of hydrogen on surface texturing and crystallization on a-Si:H thin film irradiated by excimer laser

Laser micromachining of metal films on polymer membranes

Tim D. Gerke; Dylan Fast; Vladimir Kozlov

LIACP 1990; 1038-1044https://doi.org/10.2351/1.5062176

View Articletitled, Laser micromachining of metal films on polymer membranes

LMF 10: Micromachining of Transparent Materials

CO₂ laser cutting of flexible glass substrates

Xinghua Li; Sean M. Garner

LIACP 1990; 1045-1048https://doi.org/10.2351/1.5062177

View Articletitled, CO<sub>2</sub> laser cutting of flexible glass substrates

Picosecond laser machining of fiber based sensing devices

Frank Albri; Jun Li; Robert R. J. Maier; William N. MacPherson; Duncan P. Hand

LIACP 1990; 1049-1054https://doi.org/10.2351/1.5062178

View Articletitled, Picosecond laser machining of fiber based sensing devices

Waveguides and markings inside transparent materials by fs-laser radiation

Dagmar Schaefer; Dennis Beckmann; Maren Hoerstmann-Jungemann; Ingomar Kelbassa

LIACP 1990; 1055-1059https://doi.org/10.2351/1.5062180

View Articletitled, Waveguides and markings inside transparent materials by fs-laser radiation

Investigations on microstructuring of ferroelectric materials by picosecond UV laser pulses

Mareike Stolze; Thomas Herrmann; Johannes L’huillier

LIACP 1990; 1060-1066https://doi.org/10.2351/1.5062181

View Articletitled, Investigations on microstructuring of ferroelectric materials by picosecond UV laser pulses

LMF 11: Wavelength Optimization

Trends and advances in UV-laser microprocessing

Ralph Delmdahl

LIACP 1990; 1067-1074https://doi.org/10.2351/1.5062182

View Articletitled, Trends and advances in UV-laser microprocessing

Picosecond laser ablation of carbon fiber reinforced plastics at different wavelengths

Alexander Wolynski; Thomas Herrmann; Michael Schmidt; Johannes L’huillier

LIACP 1990; 1075-1081https://doi.org/10.2351/1.5062183

View Articletitled, Picosecond laser ablation of carbon fiber reinforced plastics at different wavelengths

Laser dressing of metal bonded diamond blades for cutting of hard brittle materials

Philipp von Witzendorff; Anas Moalem; Rainer Kling

LIACP 1990; 1082-1087https://doi.org/10.2351/1.5062184

View Articletitled, Laser dressing of metal bonded diamond blades for cutting of hard brittle materials

355Nm DPSS UV laser micromachining of single-crystal silicon

Huan Yang; Jun Duan; Xiaoyan Zeng; Yu Cao

LIACP 1990; 1088-1094https://doi.org/10.2351/1.5062185

View Articletitled, 355Nm DPSS UV laser micromachining of single-crystal silicon

LMF 12: Surface Modification

Applications of surface structuring with lasers

Shan-Ting Hsu; Hongliang Wang; Gen Satoh; Y. Lawrence Yao

LIACP 1990; 1095-1104https://doi.org/10.2351/1.5062186

View Articletitled, Applications of surface structuring with lasers

Functionalization of sapphire surfaces using fs-laser radiation and selective etching

Maren Hoerstmann-Jungemann; Dominik Dobrzanski; Dagmar Schaefer; Ingomar Kelbassa

LIACP 1990; 1105-1110https://doi.org/10.2351/1.5062187

View Articletitled, Functionalization of sapphire surfaces using fs-laser radiation and selective etching

Generic parameters governing the wettability characteristics of laser-modified nylon 6,6

David Waugh; Jonathan Lawrence

LIACP 1990; 1111-1120https://doi.org/10.2351/1.5062189

View Articletitled, Generic parameters governing the wettability characteristics of laser-modified nylon 6,6

Integration of a picosecond laser system into a machining centre

Volker Schulze; Mateusz Chlipala; Rüdiger Pabst

LIACP 1990; 1121-1125https://doi.org/10.2351/1.5062190

View Articletitled, Integration of a picosecond laser system into a machining centre

Micro-sculpting of diffractive scales on metal surfaces for optical position encoders, the ‘YAGboss’ process

S. Giet; M. Ardron; F. Albri; M. D. Kidd; R. R. J. Maier; J. D. Shephard; N. J. Weston; D. P. Hand

LIACP 1990; 1126-1130https://doi.org/10.2351/1.5062191

View Articletitled, Micro-sculpting of diffractive scales on metal surfaces for optical position encoders, the ‘YAGboss’ process

Sinusoidal surface texturing using a nanosecond pulsed MOPA fiber laser

Whitney P. Davis; Sami T. Hendow; Radovan Kovacevic

LIACP 1990; 1131-1136https://doi.org/10.2351/1.5062192

View Articletitled, Sinusoidal surface texturing using a nanosecond pulsed MOPA fiber laser

LMF 13: Medical Devices and Biomedical Applications

From cw to fs: Fiber lasers in medical device manufacturing

Roland Mayerhofer; Dieter Mairhörmann; Michael Müller; Markus Röhner; Stephan Geiger; Ronald Holtz; Christoph Rüttimann

LIACP 1990; 1137-1142https://doi.org/10.2351/1.5062193

View Articletitled, From cw to fs: Fiber lasers in medical device manufacturing

Modulation of osteoblast cell response through laser surface processing of nylon 6,6

David Waugh; Jonathan Lawrence

LIACP 1990; 1143-1151https://doi.org/10.2351/1.5062194

View Articletitled, Modulation of osteoblast cell response through laser surface processing of nylon 6,6

Formation and antibacterial activities of nanostructured TiO₂ based thin films by sol-gel/laser-induced technique

Yasir F. Joya; Tao Wang; Zhu Liu

LIACP 1990; 1152-1160https://doi.org/10.2351/1.5062195

View Articletitled, Formation and antibacterial activities of nanostructured TiO<sub>2</sub> based thin films by sol-gel/laser-induced technique

Photonics in medicine – From diagnostics to training

Michael Schmidt; Maik Zimmermann; Martin Hohmann; Jan Paulus

LIACP 1990; 1161-1167https://doi.org/10.2351/1.5062196

View Articletitled, Photonics in medicine – From diagnostics to training

Effect of excimer laser irradiation of biodegradable polymer on its chemical bonding

Shan-Ting Hsu; Huade Tan; Y. Lawrence Yao

LIACP 1990; 1168-1177https://doi.org/10.2351/1.5062197

View Articletitled, Effect of excimer laser irradiation of biodegradable polymer on its chemical bonding

Research of the connection of excimer laser zoom-processing condition to the pmma micro-channel’s edge-smoothness and roughness

Zhengyang Xie; Tao Chen; Ning Liu; Xuefei Shen

LIACP 1990; 1178-1181https://doi.org/10.2351/1.5062198

View Articletitled, Research of the connection of excimer laser zoom-processing condition to the pmma micro-channel’s edge-smoothness and roughness

NANOMANUFACTURING CONFERENCE

Nano 1: Femtosecond Laser Nano-Processing

Femtosecond laser micro/nanomachining of glass materials for optofluidic applications and beyond

Ya Cheng; Fei He; Yang Liao; Zhizhan Xu; Koji Sugioka; Katsumi Midorikawa

LIACP 1990; 1182-1191https://doi.org/10.2351/1.5062199

View Articletitled, Femtosecond laser micro/nanomachining of glass materials for optofluidic applications and beyond

Non-thermal ablation of graphite by ultrashort pulsed fs-laser radiation

Martin Reininghaus; Johannes Finger; Olga Faley; Dirk Wortmann; Christoph Stampfer

LIACP 1990; 1192-1199https://doi.org/10.2351/1.5062201

View Articletitled, Non-thermal ablation of graphite by ultrashort pulsed fs-laser radiation

Micromachining of micropillar array chip on PI and PMMA substrate with excimer laser ablation

Xuefei Shen; Tao Chen; Ning Liu; Qing Zhang

LIACP 1990; 1200-1205https://doi.org/10.2351/1.5062202

View Articletitled, Micromachining of micropillar array chip on PI and PMMA substrate with excimer laser ablation

Nano 2: Two-Photon Laser Nanolithography

Recent developments in two-photon lithography

Tommaso Baldacchin; Chun-Hung Kuo; Vinicius Tribuzi; Ruben Zadoyan

LIACP 1990; 1206-1210https://doi.org/10.2351/1.5062203

View Articletitled, Recent developments in two-photon lithography

Laser-power-resolved excitations of ethylene molecules in laser-assisted synthesis of diamond films

Z. Q. Xie; X. N. He; W. Hu; Y. Gao; T. Guillemet; J. B. Park; Y. S. Zhou; Y. F. Lu

LIACP 1990; 1211-1216https://doi.org/10.2351/1.5062204

View Articletitled, Laser-power-resolved excitations of ethylene molecules in laser-assisted synthesis of diamond films

Synthesis of nitrogen-doped diamond films by vibrational excitation of precursor molecules using CO₂ laser in a combustion flame process

Lisha Fan; Zhiqiang Xie; Jongbok Park; Xiangnan He; Yunshen Zhou; Y. F. Lu

LIACP 1990; 1217-1221https://doi.org/10.2351/1.5062205

View Articletitled, Synthesis of nitrogen-doped diamond films by vibrational excitation of precursor molecules using CO<sub>2</sub> laser in a combustion flame process

Nano 3: Laser-Material Interaction at Nanoscale

Laser-induced growth of diameter-modulated single-walled carbon nanotubes

M. Mahjouri-Samani; Y. S. Zhou; W. Xiong; M. Mitchell; Y. F. Lu

LIACP 1990; 1222-1226https://doi.org/10.2351/1.5062206

View Articletitled, Laser-induced growth of diameter-modulated single-walled carbon nanotubes

Fabrication and characterization of nanoporous manganese structure by laser deposition hybrid selective electrochemical dealloying

Minlin Zhong; Ting Huang; Yu Gu; Changsheng Dong; Lin Li; Wenjin Liu

LIACP 1990; 1227-1232https://doi.org/10.2351/1.5062207

View Articletitled, Fabrication and characterization of nanoporous manganese structure by laser deposition hybrid selective electrochemical dealloying

Fiber laser processing of amorphous rare earth NeFeB magnetic materials

David Hopkinson; Andrew Cockburn; William O’Neill

LIACP 1990; 1233-1240https://doi.org/10.2351/1.5062208

View Articletitled, Fiber laser processing of amorphous rare earth NeFeB magnetic materials

Production of TiO₂ nanoparticles by laser ablation in aqueous medium

M. Boutinguiza; B. Rodríguez-González; J. Del Val; R. Comesaña; F. Lusquiños; J. Pou

LIACP 1990; 1241-1246https://doi.org/10.2351/1.5062209

View Articletitled, Production of TiO<sub>2</sub> nanoparticles by laser ablation in aqueous medium

POSTER PRESENTATION GALLERY

Topography of grain boundaries varied by short pulse laser irradiation for controlling microstructures of metals

Daisuke Tone; Masahiro Tsukamoto; Toshiya Shibayanagi; Shinji Motokoshi; Nobuyuki Abe

LIACP 1990; 1247-1250https://doi.org/10.2351/1.5062210

View Articletitled, Topography of grain boundaries varied by short pulse laser irradiation for controlling microstructures of metals

Oxide growth and color formation of stainless steel and titanium using a mopa fiber laser

Sami T. Hendow; Rosa Romero

LIACP 1990; 1251-1255https://doi.org/10.2351/1.5062211

View Articletitled, Oxide growth and color formation of stainless steel and titanium using a mopa fiber laser

Aperture technology of coherent-beam-combining (CBC) for fiber laser

Zheng-yu Ye; Si-si Zhao; Zhi-yong Wang

LIACP 1990; 1256-1260https://doi.org/10.2351/1.5062212

View Articletitled, Aperture technology of coherent-beam-combining (CBC) for fiber laser

Mechanisms of the porosity formation during the fiber laser lap welding of Al 5754 sheets

Jun Wang; Chunming Wang; Shanglu Yang; Jing Zhang; Guozheng Wang; Xiyuan Hu; Shengfu Yu

LIACP 1990; 1261-1266https://doi.org/10.2351/1.5062214

View Articletitled, Mechanisms of the porosity formation during the fiber laser lap welding of Al 5754 sheets

Improvement of energy efficiency for glass tube fusing

Hendrik Gebauer; Lars Richter; Uwe Stute; Ludger Overmeyer

LIACP 1990; 1267-1271https://doi.org/10.2351/1.5062215

View Articletitled, Improvement of energy efficiency for glass tube fusing

Experimental analysis of automated laser forming for shipbuilding industry

Pablo Romero; Nerea Otero; Victor Pintos; Rosa M. Arias

LIACP 1990; 1272-1279https://doi.org/10.2351/1.5062216

View Articletitled, Experimental analysis of automated laser forming for shipbuilding industry

Laser-assisted manufacturing of bioactive glass implants for cranial defect restoration

J. Del Val; R. Comesaña; F. Lusquiños; F. Quintero; A. Riveiro; M. Boutinguiza; J. Pou

LIACP 1990; 1280-1286https://doi.org/10.2351/1.5062217

View Articletitled, Laser-assisted manufacturing of bioactive glass implants for cranial defect restoration

Production of aluminum foams by laser cladding

J. Del Val; A. Riveiro; R. Comesaña; F. Lusquiños; M. Boutinguiza; F. Quintero; J. Pou

LIACP 1990; 1287-1293https://doi.org/10.2351/1.5062218

View Articletitled, Production of aluminum foams by laser cladding

Direct laser metal deposition of tungsten carbide–cobalt-chrome (WC/Co/Cr) powder

Andrea Angelastro; Sabina L. Campanelli; Antonio D. Ludovico; Simone Ferrara

LIACP 1990; 1294-1300https://doi.org/10.2351/1.5062219

View Articletitled, Direct laser metal deposition of tungsten carbide–cobalt-chrome (WC/Co/Cr) powder

Laser annealing of ITO nanoparticles for TCO films using 1.5 µm laser radiation

Heng Pan; C. P. Grigoropoulos; Daeho Lee; Tony Hoult; Hee Park

LIACP 1990; 1301-1308https://doi.org/10.2351/1.5062221

View Articletitled, Laser annealing of ITO nanoparticles for TCO films using 1.5 µm laser radiation

Ultra-high speed disk laser cutting of CFRP and laser direct joining of pitch type CFRP to stainless steel

Kwang-Woon Jung; Yousuke Kawahito; Seiji Katayama

LIACP 1990; 1309-1314https://doi.org/10.2351/1.5062222

View Articletitled, Ultra-high speed disk laser cutting of CFRP and laser direct joining of pitch type CFRP to stainless steel

Spectral resolution improvement in laser-induced breakdown spectroscopy through the generation of high-temperature and low-density plasmas

X. N. He; Z. Q. Xie; Y. S. Zhou; L. B. Guo; W. Hu; Y. F. Lu

LIACP 1990; 1315-1321https://doi.org/10.2351/1.5062223

View Articletitled, Spectral resolution improvement in laser-induced breakdown spectroscopy through the generation of high-temperature and low-density plasmas

Microstructures and properties of uhss laser welds

Stanislav Nemecek; Tomas Muzik

LIACP 1990; 1322-1325https://doi.org/10.2351/1.5062224

View Articletitled, Microstructures and properties of uhss laser welds

Pulse width effect in UV laser patterning of build-up film with ceramic fillers for IC substrates

Hyonkee Sohn; Dong-Sig Shin; Jiyeon Choi

LIACP 1990; 1326-1329https://doi.org/10.2351/1.5062225

View Articletitled, Pulse width effect in UV laser patterning of build-up film with ceramic fillers for IC substrates