Volumes | LIA Conference Proceedings | AIP Publishing

Skip to Main Content

Skip Nav Destination

ILSC® ‘90: Proceedings of the International Laser Safety Conference

BEAM MEASUREMENTS & DIAGNOSTICS

LIA beam characterization report

M. W. Sasnett

LIACP 1990; 1-8https://doi.org/10.2351/1.5058364

View Articletitled, LIA beam characterization report

Status of draft ISO standard TC172/SC9 laser beam width, waist location, divergence and propagation factor

J. Fleischer; B. Basanese; S. Guggenheimer; D. Wright; T. Lieb; T. Siegman

LIACP 1990; 9-12https://doi.org/10.2351/1.5058405

View Articletitled, Status of draft ISO standard TC172/SC9 laser beam width, waist location, divergence and propagation factor

Plastic burn analysis (PBA) for CO₂ laser beam diagnostics

David R. Whitehouse; Carl J. Nilsen

LIACP 1990; 13-27https://doi.org/10.2351/1.5058359

View Articletitled, Plastic burn analysis (PBA) for CO<sub>2</sub> laser beam diagnostics

Beam analyzing system for CO₂-lasers

O. Gregersen; F. O. Olsen

LIACP 1990; 28-35https://doi.org/10.2351/1.5058371

View Articletitled, Beam analyzing system for CO<sub>2</sub>-lasers

Laser beam profiling the automated way

Roger L. Rypma

LIACP 1990; 36-40https://doi.org/10.2351/1.5058379

View Articletitled, Laser beam profiling the automated way

Multiple species coherent anti-stokes Raman spectroscopy (CARS) in turbulent jet flames

Kevin W. Boyack

LIACP 1990; 1-10https://doi.org/10.2351/1.5058410

View Articletitled, Multiple species coherent anti-stokes Raman spectroscopy (CARS) in turbulent jet flames

Simultaneous measurements of temperature and density in air flows using UV laser spectroscopy

D. G. Fletcher; R. L. McKenzie

LIACP 1990; 11-19https://doi.org/10.2351/1.5058407

View Articletitled, Simultaneous measurements of temperature and density in air flows using UV laser spectroscopy

Multispecies Raman scattering combines with molecular fluorescence

Robert S. Barlow

LIACP 1990; 20-27https://doi.org/10.2351/1.5058411

View Articletitled, Multispecies Raman scattering combines with molecular fluorescence

Recent developments in laser diagnostics at the stanford high temperature gasdynamics laboratory

J. M. Seitzman; I. van Cruyningen; R. K. Hanson

LIACP 1990; 28-38https://doi.org/10.2351/1.5058412

View Articletitled, Recent developments in laser diagnostics at the stanford high temperature gasdynamics laboratory

Planar laser-induced fluorescence diagnostics for large scale test facilities

M. G. Allen; S. J. Davis; J. Verdieck; D. Burde

LIACP 1990; 39-48https://doi.org/10.2351/1.5058413

View Articletitled, Planar laser-induced fluorescence diagnostics for large scale test facilities

Evidence of local stagnation in supersonic mixing layers using one-dimensional laser Rayleigh and Raman scattering

D. C. Fourguette

LIACP 1990; 49-56https://doi.org/10.2351/1.5058414

View Articletitled, Evidence of local stagnation in supersonic mixing layers using one-dimensional laser Rayleigh and Raman scattering

Vorticity field measurements using laser induced photochemical anemometry (LIPA)

R. E. Falco; C. P. Gendrich; C. C. Chu

LIACP 1990; 57-69https://doi.org/10.2351/1.5058415

View Articletitled, Vorticity field measurements using laser induced photochemical anemometry (LIPA)

Combustion diagnostics by two-dimensional laser induced fluorescence using tunable excimer lasers

A. Arnold; H. Becker; W. Ketterle; M. Schäfer; J. Wolfrum

LIACP 1990; 70-82https://doi.org/10.2351/1.5058416

View Articletitled, Combustion diagnostics by two-dimensional laser induced fluorescence using tunable excimer lasers

A single laser apparatus for writing patterns into unseeded air

Barry Zhang; Walter R. Lempert; Richard B. Miles

LIACP 1990; 83-90https://doi.org/10.2351/1.5058417

View Articletitled, A single laser apparatus for writing patterns into unseeded air

Single exposure double frame particle image velocimeters

Richard D. Keane; Ronald J. Adrian; David K. Ford

LIACP 1990; 91-110https://doi.org/10.2351/1.5058418

View Articletitled, Single exposure double frame particle image velocimeters

Flow field diagnostics by spectrally filtered Rayleigh scattering

Joseph Forkey; Walter R. Lempert; Richard B. Miles

LIACP 1990; 111-120https://doi.org/10.2351/1.5058406

View Articletitled, Flow field diagnostics by spectrally filtered Rayleigh scattering

Holographic recording of 3-D flow configurations for particle image velocimetry (PIV)

K. Hinsch; H. Hinrichs; G. Kuhfahl; P. Meinlschmidt

LIACP 1990; 121-130https://doi.org/10.2351/1.5058408

View Articletitled, Holographic recording of 3-D flow configurations for particle image velocimetry (PIV)

Particle image velocimetry measurements of internal combustion engine flows

F. W. Schipperijn; R. F. Sawyer

LIACP 1990; 131-140https://doi.org/10.2351/1.5058409

View Articletitled, Particle image velocimetry measurements of internal combustion engine flows

BEAM DELIVERY & BEAM SHAPING

Automatic laser beam alignment

S. L. Chen; L. Li; P. Modern; W. M. Steen

LIACP 1990; 41-51https://doi.org/10.2351/1.5058384

View Articletitled, Automatic laser beam alignment

A beam guiding system combining several lasers with various working stations

U. Zoske; M. Bea; D. Fritz; A. Giesen

LIACP 1990; 52-60https://doi.org/10.2351/1.5058398

View Articletitled, A beam guiding system combining several lasers with various working stations

Analysis of CO₂ laser beam suitable for thick metal cutting

Kuniaki Fukaya; Norio Karube

LIACP 1990; 61-70https://doi.org/10.2351/1.5058400

View Articletitled, Analysis of CO<sub>2</sub> laser beam suitable for thick metal cutting

Application of beam profiling in the design and use of industrial lasers

Robert E. Basanese

LIACP 1990; 71-82https://doi.org/10.2351/1.5058401

View Articletitled, Application of beam profiling in the design and use of industrial lasers

Transient behaviour of optical components and their correction by adaptive optical elements

M. Bea; S. Borik; A. Giesen; U. Zoske

LIACP 1990; 83-94https://doi.org/10.2351/1.5058402

View Articletitled, Transient behaviour of optical components and their correction by adaptive optical elements

HIGH-POWER ROD AND SLAB LASERS

Diode array pumped slab lasers

T. Irwin; D. Benfey; M. Scolpino; D. Brown; A. Karpinski

LIACP 1990; 95-99https://doi.org/10.2351/1.5058404

View Articletitled, Diode array pumped slab lasers

Towards high brightness multi-kilowatt solid state lasers

K. R. Manes; L. E. Zapata

LIACP 1990; 100-122https://doi.org/10.2351/1.5058356

View Articletitled, Towards high brightness multi-kilowatt solid state lasers

Performance of three-crystal 1800 watt CW Nd:YAG laser

J. L. Jellison; D. M. Keicher; P. W. Fuerschbach

LIACP 1990; 123-131https://doi.org/10.2351/1.5058357

View Articletitled, Performance of three-crystal 1800 watt CW Nd:YAG laser

ADVANCES IN LASER DRILLING

Application of slab-based Nd:YAG lasers at GE aircraft engines

Todd J. Rockstroh

LIACP 1990; 132-140https://doi.org/10.2351/1.5058358

View Articletitled, Application of slab-based Nd:YAG lasers at GE aircraft engines

High speed laser drilling

Flemming O. Olsen; Sven Heckermann

LIACP 1990; 141-150https://doi.org/10.2351/1.5058360

View Articletitled, High speed laser drilling

On-the-fly drilling with a fiber delivered face pumped laser beam

Angel L. Ortiz, Jr

LIACP 1990; 151-166https://doi.org/10.2351/1.5058361

View Articletitled, On-the-fly drilling with a fiber delivered face pumped laser beam

THE MATURING OF LASER CUTTING

Metallurgical characteristics of laser cut aerospace alloys

Naresh J. Kar, PhD.; Leonard Migliore

LIACP 1990; 167-198https://doi.org/10.2351/1.5058362

View Articletitled, Metallurgical characteristics of laser cut aerospace alloys

State of the art in laser cutting with CO₂ lasers

E. Beyer; D. Petring

LIACP 1990; 199-212https://doi.org/10.2351/1.5058363

View Articletitled, State of the art in laser cutting with CO<sub>2</sub> lasers

Heat input during high pressure laser cutting of inconel & titanium

Stanley L. Ream; Pauline Bary; Paul M. Perozek

LIACP 1990; 213-224https://doi.org/10.2351/1.5058365

View Articletitled, Heat input during high pressure laser cutting of inconel & titanium

The “Slab” laser: Productivity and processing advantages in industrial applications

William P. Dobbins; Hanspeter von Arb

LIACP 1990; 225-234https://doi.org/10.2351/1.5058366

View Articletitled, The “Slab” laser: Productivity and processing advantages in industrial applications

High speed and high accuracy three dimensional CO₂ laser processing machine with 32-bit microprocessor CNC

Masuki Tsukamoto; Manabu Kubo

LIACP 1990; 235-260https://doi.org/10.2351/1.5058367

View Articletitled, High speed and high accuracy three dimensional CO<sub>2</sub> laser processing machine with 32-bit microprocessor CNC

Ceramics cutting with pulsed Nd:YAG laser

K. Ogata; N. Miyanagi; K. Suzuki; Y. Shimomura

LIACP 1990; 261-270https://doi.org/10.2351/1.5058368

View Articletitled, Ceramics cutting with pulsed Nd:YAG laser

NOVEL PROCESSES

Laser customizable gate arrays: Coming soon?

Robert R. Krchnavek; Daniel F. Daly

LIACP 1990; 271-280https://doi.org/10.2351/1.5058369

View Articletitled, Laser customizable gate arrays: Coming soon?

Recent developments in three-dimensional laser machining

G. Chryssolouris; P. Sheng

LIACP 1990; 281-293https://doi.org/10.2351/1.5058370

View Articletitled, Recent developments in three-dimensional laser machining

Three dimensional shaping of ceramics by using CO₂ laser and its optimum processing condition

A. Kitagawa; A. Matsunawa

LIACP 1990; 294-301https://doi.org/10.2351/1.5058372

View Articletitled, Three dimensional shaping of ceramics by using CO<sub>2</sub> laser and its optimum processing condition

Fundamental study on laser treatment of architectural materials

K. Sugimoto; S. Wignarajah; K. Nagase; S. Yasu; K. Kimura; M. Kasuya; S. Kureha

LIACP 1990; 302-312https://doi.org/10.2351/1.5058373

View Articletitled, Fundamental study on laser treatment of architectural materials

LASER WELDING I

Physical phenomena and their interpretation in laser materials processing

Akira Matsunawa

LIACP 1990; 313-324https://doi.org/10.2351/1.5058374

View Articletitled, Physical phenomena and their interpretation in laser materials processing

The effect of laser pulse tailored welding on inconel 718

Mary Helen McCay; C. Michael Sharp; Michael G. Womack; T. Dwayne McCay; Naren B. Dahotre

LIACP 1990; 325-342https://doi.org/10.2351/1.5058375

View Articletitled, The effect of laser pulse tailored welding on inconel 718

Laser welding of a SiC/Al-alloy metal matrix composite

N. B. Dahotre; M. H. McCay; T. D. McCay; C. M. Sharp; S. Gopinathan; Lawrence F. Allard

LIACP 1990; 343-356https://doi.org/10.2351/1.5058376

View Articletitled, Laser welding of a SiC/Al-alloy metal matrix composite

Fatigue strength of laser-welded lap joints

Charles E. Albright; Chris Hsu; R. Olan Lund

LIACP 1990; 357-363https://doi.org/10.2351/1.5058377

View Articletitled, Fatigue strength of laser-welded lap joints

LASER WELDING II

Laser welding of steels: Relationship between laser power, penetration depth, welding speed and beam polarization

L. Mannik; S. K. Brown

LIACP 1990; 364-372https://doi.org/10.2351/1.5058378

View Articletitled, Laser welding of steels: Relationship between laser power, penetration depth, welding speed and beam polarization

The control of high power YAG laser plume in narrow space welding

G. Takano; O. Matsumoto; Y. Nagura; T. Ishide; A. Yokoyama

LIACP 1990; 373-381https://doi.org/10.2351/1.5058380

View Articletitled, The control of high power YAG laser plume in narrow space welding

Laser assisted gas metal arc weld characteristics

K. H. Magee; V. E. Merchant; C. V. Hyatt

LIACP 1990; 382-399https://doi.org/10.2351/1.5058381

View Articletitled, Laser assisted gas metal arc weld characteristics

Implementation of laser welding for lamp leads

James H. Doubrava; Grant W. Ticknor; Marshall G. Jones

LIACP 1990; 400-410https://doi.org/10.2351/1.5058382

View Articletitled, Implementation of laser welding for lamp leads

On-line laser weld sensing for quality control

L. Li; N. Qi; D. J. Brookfield; W. M. Steen

LIACP 1990; 411-421https://doi.org/10.2351/1.5058383

View Articletitled, On-line laser weld sensing for quality control

Visualization and dimensional measurement of the laser weld pool

D. D. Voelkel; J. Mazumder

LIACP 1990; 422-429https://doi.org/10.2351/1.5058385

View Articletitled, Visualization and dimensional measurement of the laser weld pool

Laser welding in reduced gravity

Gary L. Workman; William F. Kaukler

LIACP 1990; 430-440https://doi.org/10.2351/1.5058386

View Articletitled, Laser welding in reduced gravity

SURFACE MODIFICATION I

Mathematical modelling of continuous wave carbon dioxide (CO₂) laser processing of materials using non-dimensional plots

S. J. Sharkey; W. M. Steen; D. J. Brookfield

LIACP 1990; 441-450https://doi.org/10.2351/1.5058387

View Articletitled, Mathematical modelling of continuous wave carbon dioxide (CO<sub>2</sub>) laser processing of materials using non-dimensional plots

Increasing the efficiency of laser beam hardening

Thomas Rudlaff; Friedrich Dausinger

LIACP 1990; 451-459https://doi.org/10.2351/1.5058388

View Articletitled, Increasing the efficiency of laser beam hardening

Surface annealing of steel wires for automotive tires by CO₂ laser with cone shaped focusing mirror

K. Minamida; M. Kido; A. Ishibashi; S. Mogami; S. Sasaki

LIACP 1990; 460-468https://doi.org/10.2351/1.5058389

View Articletitled, Surface annealing of steel wires for automotive tires by CO<sub>2</sub> laser with cone shaped focusing mirror

Laser transformation hardening of engine valve steels

N. Mckeown; W. M. Steen; D. G. McCartney

LIACP 1990; 469-479https://doi.org/10.2351/1.5058390

View Articletitled, Laser transformation hardening of engine valve steels

The role of beam shape in convection and heat transfer in laser melted pool

Yang Xi–Chen; Yan Yu–He; Peng Shou–Jun; Shi Jing–Nian

LIACP 1990; 480-491https://doi.org/10.2351/1.5058391

View Articletitled, The role of beam shape in convection and heat transfer in laser melted pool

Laser rapid solidification microstructure of single crystal aluminum alloys

Hiroyuki Simidzu; Seiji Katayama; Akira Mastunawa

LIACP 1990; 492-501https://doi.org/10.2351/1.5058392

View Articletitled, Laser rapid solidification microstructure of single crystal aluminum alloys

SURFACE MODIFICATION II

Laser cladding of Mg-Al alloys

A. A. Wang; S. Sircar; J. Mazumder

LIACP 1990; 502-512https://doi.org/10.2351/1.5058393

View Articletitled, Laser cladding of Mg-Al alloys

SiO₂ film formation by CO₂ laser PVD with O₂ feeding

A. Shuhara; N. Ohmori; T. Takayama; M. Ohmine; K. Oka; T. Morita; S. Hiramoto

LIACP 1990; 513-519https://doi.org/10.2351/1.5058394

View Articletitled, SiO<sub>2</sub> film formation by CO<sub>2</sub> laser PVD with O<sub>2</sub> feeding

Laser cladding of WC-Co powder

Yang Xi–Chen; Zhen Tian–Xi; Zhang Nai–Ken

LIACP 1990; 520-524https://doi.org/10.2351/1.5058395

View Articletitled, Laser cladding of WC-Co powder

Laser nitriding of titanium by solid state diffusion of nitrogen at constant temperature

T. Duverneix; T. Puig; F. Bataille

LIACP 1990; 525-538https://doi.org/10.2351/1.5058396

View Articletitled, Laser nitriding of titanium by solid state diffusion of nitrogen at constant temperature

The kinematical calculation for numerical control (NC) programming for laser heat-treatment (LHT) of plate cams

Wang Yude; Li Yuhong

LIACP 1990; 539-547https://doi.org/10.2351/1.5058399

View Articletitled, The kinematical calculation for numerical control (NC) programming for laser heat-treatment (LHT) of plate cams

SESSION ONE: DOMESTIC LASER SAFETY STANDARDS

Laser standards: Historical past, challenging future

George M. Wilkening

LIACP 1990; A1-A10https://doi.org/10.2351/1.5056014

View Articletitled, Laser standards: Historical past, challenging future

FDA laser standards: Status overview

Jerome E. Dennis

LIACP 1990; A11-A24https://doi.org/10.2351/1.5056013

View Articletitled, FDA laser standards: Status overview

ANSI accredited Z136 committee: Revisions, update, and new standards activity

Sidney S. Charschan, P.E.

LIACP 1990; A25-A34https://doi.org/10.2351/1.5056015

View Articletitled, ANSI accredited Z136 committee: Revisions, update, and new standards activity

OSHA standards related to laser safety

Robert A. Curtis

LIACP 1990; A35-A39https://doi.org/10.2351/1.5056016

View Articletitled, OSHA standards related to laser safety

ACGIH limits and guidance used in laser safety

William E. Murray; Thomas K. Wilkinson

LIACP 1990; A41-A49https://doi.org/10.2351/1.5056017

View Articletitled, ACGIH limits and guidance used in laser safety

An overview of state laser regulations

Robert T. Handren, Jr.

LIACP 1990; A51-A57https://doi.org/10.2351/1.5056018

View Articletitled, An overview of state laser regulations

State laser standards: Implementing the CRCPD’s “Model state laser standards”

Kenneth L. Barat

LIACP 1990; A59-A60https://doi.org/10.2351/1.5056019

View Articletitled, State laser standards: Implementing the CRCPD’s “Model state laser standards”

SESSION TWO: INTERNATIONAL LASER SAFETY STANDARDS

Current status of U.S., European and international laser safety standards and the concept of horizontal & vertical standards

James F. Smith

LIACP 1990; B1-B11https://doi.org/10.2351/1.5056021

View Articletitled, Current status of U.S., European and international laser safety standards and the concept of horizontal & vertical standards

The status of laser standards in the U.K.

Anthony M. Bandle; J. Arwel Barrett

LIACP 1990; B13-B22https://doi.org/10.2351/1.5056020

View Articletitled, The status of laser standards in the U.K.

The DIN and CEN laser eyewear standards: Review and testing requirements

Ernest Sutter

LIACP 1990; B23-B40https://doi.org/10.2351/1.5056022

View Articletitled, The DIN and CEN laser eyewear standards: Review and testing requirements

Comparison of FDA vs. IEC laser safety standards

H. David Edmunds

LIACP 1990; B41-B54https://doi.org/10.2351/1.5056023

View Articletitled, Comparison of FDA vs. IEC laser safety standards

Impact of international laser safety standards on manufacturers

Robert Weiner

LIACP 1990; B55-B60https://doi.org/10.2351/1.5056024

View Articletitled, Impact of international laser safety standards on manufacturers

A summary of the EUREKA industrial forum laser safety

Michael Botts

LIACP 1990; B61-B70https://doi.org/10.2351/1.5056025

View Articletitled, A summary of the EUREKA industrial forum laser safety

SESSION THREE: NON-BEAM HAZARDS

Control measures necessary for limiting occupational exposures in laser surgical procedures

C. Eugene Moss, M.S.

LIACP 1990; C1-C21https://doi.org/10.2351/1.5056028

View Articletitled, Control measures necessary for limiting occupational exposures in laser surgical procedures

Scattered and plasma-related optical radiations associated with industrial laser processes

Maila Hietanen; Patrick Von Nandelstadh

LIACP 1990; C105-C108https://doi.org/10.2351/1.5056026

View Articletitled, Scattered and plasma-related optical radiations associated with industrial laser processes

Spectroscopic evaluation of toxic by-products produced during industrial laser processing

Daryl J. Doyle, Ph.D.

LIACP 1990; C109-C114https://doi.org/10.2351/1.5056027

View Articletitled, Spectroscopic evaluation of toxic by-products produced during industrial laser processing

Airborne emissions produced by the interaction of a carbon dioxide laser with glass, metals, and plastics

Alan Fleeger; C. Eugene Moss

LIACP 1990; C23-C33https://doi.org/10.2351/1.5056029

View Articletitled, Airborne emissions produced by the interaction of a carbon dioxide laser with glass, metals, and plastics

RF-excited carbon dioxide lasers: Concerns of RF occupational exposures

Teresa A. Seitz; CIH C. Eugene Moss, HP, CSS

LIACP 1990; C35-C40https://doi.org/10.2351/1.5056030

View Articletitled, RF-excited carbon dioxide lasers: Concerns of RF occupational exposures

High-tech dust removal in conjunction with laser cutting processes

Kalman Andrasfalvy

LIACP 1990; C41-C53https://doi.org/10.2351/1.5056031

View Articletitled, High-tech dust removal in conjunction with laser cutting processes

Ventilation system design for industrial laser operation

Kenneth R. Troutman, CIH

LIACP 1990; C55-C67https://doi.org/10.2351/1.5056032

View Articletitled, Ventilation system design for industrial laser operation

Toxicological characterization of chemicals produced from laser irradiation of graphite composite materials

Joseph K. Kwan, Ph.D.

LIACP 1990; C69-C96https://doi.org/10.2351/1.5056033

View Articletitled, Toxicological characterization of chemicals produced from laser irradiation of graphite composite materials

Industrial hygiene concerns of laser dyes

Gordon Miller, Ph.D.

LIACP 1990; C97-C103https://doi.org/10.2351/1.5056034

View Articletitled, Industrial hygiene concerns of laser dyes

SESSION FOUR: BIOEFFECTS OF LASERS

Laser safety and bioeffects research: An overview

Myron L. Wolbarsht, Ph.D.

LIACP 1990; D1-D8https://doi.org/10.2351/1.5056036

View Articletitled, Laser safety and bioeffects research: An overview

Bioeffects of repetitive pulsed lasers

David H. Sliney; Wesley J. Marshall

LIACP 1990; D15-D23https://doi.org/10.2351/1.5056035

View Articletitled, Bioeffects of repetitive pulsed lasers

Research relative to safety formulations for retinal damage from extended sources and large retinal images

D. Courant; L. Court; D. Sliney

LIACP 1990; D25-D33https://doi.org/10.2351/1.5056037

View Articletitled, Research relative to safety formulations for retinal damage from extended sources and large retinal images

Bioeffects of ultrashort pulses: An overview

Donald N. Farrer, Ph.D.

LIACP 1990; D9-D12https://doi.org/10.2351/1.5056038

View Articletitled, Bioeffects of ultrashort pulses: An overview

SESSION FIVE: INDUSTRIAL LASER SAFETY PRACTICES AND PROBLEMS

Safety audits of industrial laser facilities

James R. Johnson

LIACP 1990; E1-E4https://doi.org/10.2351/1.5056041

View Articletitled, Safety audits of industrial laser facilities

Lasers in the robot’s hand: The safer solution

Bristol E. Hammond

LIACP 1990; E15-E18https://doi.org/10.2351/1.5056039

View Articletitled, Lasers in the robot’s hand: The safer solution

Laser safety associated with the manufacture and use of laser diodes

Ron C. Petersen

LIACP 1990; E19-E27https://doi.org/10.2351/1.5056040

View Articletitled, Laser safety associated with the manufacture and use of laser diodes

Review of scientific research in the Federal Republic of Germany concerning emissions in laser material processing

K. Engel; A. Hampe; D. Seebaum; I. Vinke; J. Wittbecker; R. Koch; F. Trasser

LIACP 1990; E29-E52https://doi.org/10.2351/1.5056042

View Articletitled, Review of scientific research in the Federal Republic of Germany concerning emissions in laser material processing

Enclosure design concepts for high power lasers

J. Michael Green

LIACP 1990; E5-E13https://doi.org/10.2351/1.5056044

View Articletitled, Enclosure design concepts for high power lasers

Laser system design for safety in manufacturing

A. Kestenbaum; J. Coyle

LIACP 1990; E53-E64https://doi.org/10.2351/1.5056043

View Articletitled, Laser system design for safety in manufacturing

Safety concerns for laser displays and entertainment installations

Gregory Makhov

LIACP 1990; E65-E69https://doi.org/10.2351/1.5056045

View Articletitled, Safety concerns for laser displays and entertainment installations

Barrier curtains for laser hazard control

David F. Wilson, Chairman

LIACP 1990; E71-E75https://doi.org/10.2351/1.5056046

View Articletitled, Barrier curtains for laser hazard control

SESSION SIX: MEDICAL LASER SAFETY PRACTICES AND PROBLEMS

Overview of laser safety in health care facilities

Rocco V. Lobraico, M.D., F.A.C.S.

LIACP 1990; F1-F7https://doi.org/10.2351/1.5056048

View Articletitled, Overview of laser safety in health care facilities

Clinical laser safety issues - A nursing perspective

Penny J. Smalley, R.N.

LIACP 1990; F17-F21https://doi.org/10.2351/1.5056047

View Articletitled, Clinical laser safety issues - A nursing perspective

Laser safety in general surgery, 1990

Christopher J. Daly, M.D., F.A.C.S.

LIACP 1990; F23-F25https://doi.org/10.2351/1.5056049

View Articletitled, Laser safety in general surgery, 1990

Laser safety in otolaryngology head and neck surgery

Jack A. Coleman, JR., M.D.; Robert H. Ossoff, D.M.D., M.D.

LIACP 1990; F27-F37https://doi.org/10.2351/1.5056050

View Articletitled, Laser safety in otolaryngology head and neck surgery

Methods for limiting exposure to laser plume during bronchoscopic and laryngoscopic surgery

D. Akale; A. J. Streifel; R. Ahren

LIACP 1990; F39-F43https://doi.org/10.2351/1.5056051

View Articletitled, Methods for limiting exposure to laser plume during bronchoscopic and laryngoscopic surgery

Operating room safety during laser surgery

Mitchel B. Sosis, M.D., Ph.D.

LIACP 1990; F9-F15https://doi.org/10.2351/1.5056052

View Articletitled, Operating room safety during laser surgery

SESSION SEVEN: INDUSTRIAL LASER SAFETY PROGRAMS

Management of a laser safety program in the research environment

C. P. (Ken) Skillern

LIACP 1990; G1-G8https://doi.org/10.2351/1.5056053

View Articletitled, Management of a laser safety program in the research environment

Utilization of the nominal hazard zone in control measure selection

R. James Rockwell, Jr.

LIACP 1990; G25-G43https://doi.org/10.2351/1.5056054

View Articletitled, Utilization of the nominal hazard zone in control measure selection

Measurement and analysis of laser radiation for regulatory purposes

David D. Royston; Robert J. Landry; Jerome E. Dennis; Dale L. Smith

LIACP 1990; G45-G60https://doi.org/10.2351/1.5056055

View Articletitled, Measurement and analysis of laser radiation for regulatory purposes

Risk assessment applied to materials processing lasers: A continuing U.K. initiative

Anthony M. Bandle; J. Arwel Barrett

LIACP 1990; G61-G64https://doi.org/10.2351/1.5056056

View Articletitled, Risk assessment applied to materials processing lasers: A continuing U.K. initiative

A technical training approach to the safe operation, maintenance and service of lasers in manufacturing

Phillip Hoffman

LIACP 1990; G65-G74https://doi.org/10.2351/1.5056057

View Articletitled, A technical training approach to the safe operation, maintenance and service of lasers in manufacturing

Laser safety training for students in laser electro-optics technology programs

Prem Batra

LIACP 1990; G75-G82https://doi.org/10.2351/1.5056058

View Articletitled, Laser safety training for students in laser electro-optics technology programs

Class 2 laser safety training programs

James F. Smith

LIACP 1990; G83-G86https://doi.org/10.2351/1.5056059

View Articletitled, Class 2 laser safety training programs

Laser safety training video for use in an R&D and industrial setting

Kenneth L. Johnson

LIACP 1990; G87-G89https://doi.org/10.2351/1.5056060

View Articletitled, Laser safety training video for use in an R&D and industrial setting

Implementing ANSI Z136.2 standard with optical fiber communication systems

James F. Smith

LIACP 1990; G9-G24https://doi.org/10.2351/1.5056061

View Articletitled, Implementing ANSI Z136.2 standard with optical fiber communication systems

SESSION EIGHT: MEDICAL LASER SAFETY PROGRAMS

Implementing the ANSI Z136.3 standard in health care facilities

Dan K. Lundergan

LIACP 1990; H1-H5https://doi.org/10.2351/1.5056064

View Articletitled, Implementing the ANSI Z136.3 standard in health care facilities

Survey results of 156 medical laser facilities: Identifying utilization, training and equipment

Denise Akale

LIACP 1990; H15-H17https://doi.org/10.2351/1.5056062

View Articletitled, Survey results of 156 medical laser facilities: Identifying utilization, training and equipment

Options in choosing laser protective eyewear

Donna J. Spaeth

LIACP 1990; H19-H29https://doi.org/10.2351/1.5056063

View Articletitled, Options in choosing laser protective eyewear

Medical laser safety programs: Management and training

Patricia A. Hartwig, R.N.

LIACP 1990; H31-H35https://doi.org/10.2351/1.5056065

View Articletitled, Medical laser safety programs: Management and training

A summary of selected recent MDR laser incident reports

Richard P. Felten

LIACP 1990; H7-H13https://doi.org/10.2351/1.5056066

View Articletitled, A summary of selected recent MDR laser incident reports

SESSION NINE: LASER SAFETY ANALYSIS AND EQUIPMENT

Laser hazard analysis: Special problem areas

David H. Sliney

LIACP 1990; I1-I6https://doi.org/10.2351/1.5056068

View Articletitled, Laser hazard analysis: Special problem areas

Military laser range safety

James K. Franks

LIACP 1990; I17-I23https://doi.org/10.2351/1.5056067

View Articletitled, Military laser range safety

Damage testing of polycarbonate laser protective eyewear

Robert J. Tucker

LIACP 1990; I25-I27https://doi.org/10.2351/1.5056069

View Articletitled, Damage testing of polycarbonate laser protective eyewear

Instrumentation selection for laser safety and FDA compliance measurements

Aaron A. Sanders, Ph.D.

LIACP 1990; I29-I31https://doi.org/10.2351/1.5056070

View Articletitled, Instrumentation selection for laser safety and FDA compliance measurements

Focussed laser beam hazard calculations

Wesley J. Marshall

LIACP 1990; I33-I39https://doi.org/10.2351/1.5056071

View Articletitled, Focussed laser beam hazard calculations

Implementing the ANSI Z-87.1 standard for eye protection

Mark McLear

LIACP 1990; I41-I46https://doi.org/10.2351/1.5056072

View Articletitled, Implementing the ANSI Z-87.1 standard for eye protection

Selecting and testing laser eye protection

Jack A. Labo; Michael W. Mayo

LIACP 1990; I7-I15https://doi.org/10.2351/1.5056073

View Articletitled, Selecting and testing laser eye protection

PREFACE

Laser safety in an international scope

R. James Rockwell, Jr.

LIACP 1990; i-iiihttps://doi.org/10.2351/1.5056074

View Articletitled, Laser safety in an international scope