Skip Nav Destination

Proceedings Papers

Select Year

Select Volume

ICALEO® 2003: 22nd International Congress on Laser Materials Processing and Laser Microfabrication

INTERNATIONAL LASER SAFETY CONFERENCE

Update on the ANSI Z136.4 recommended practice for laser safety measurements for hazard evaluation

Sheldon Zimmerman

LIACP 2018; 101-103https://doi.org/10.2351/1.5056514

Abstract

View Articletitled, Update on the ANSI Z136.4 recommended practice for laser safety measurements for hazard evaluation

PDF

Impact of light emitting diodes upon laboratory safety

R. I. Young

LIACP 2018; 106-110https://doi.org/10.2351/1.5056515

Abstract

View Articletitled, Impact of light emitting diodes upon laboratory safety

PDF

Concepts of probabilistic risk analysis and applicability for “day-to-day” laser safety evaluations

Karl Schulmeister; Georg Vees; David Sliney

LIACP 2018; 111-115https://doi.org/10.2351/1.5056516

Abstract

View Articletitled, Concepts of probabilistic risk analysis and applicability for “day-to-day” laser safety evaluations

PDF

Beam propagation hazard calculations for telescopic viewing of laser beams

Ulfried Grabner; Georg Vees; Karl Schulmeister

LIACP 2018; 116-125https://doi.org/10.2351/1.5056517

Abstract

View Articletitled, Beam propagation hazard calculations for telescopic viewing of laser beams

PDF

Classification of laser/LED arrays under IEC 60825-1

Robert Weiner

LIACP 2018; 126-127https://doi.org/10.2351/1.5056518

Abstract

View Articletitled, Classification of laser/LED arrays under IEC 60825-1

PDF

Issues in classification of scanning lasers as repetitively pulsed lasers

Nikolay Stoev

LIACP 2018; 128-130https://doi.org/10.2351/1.5056519

Abstract

View Articletitled, Issues in classification of scanning lasers as repetitively pulsed lasers

PDF

Laser injuries and deaths

Thomas E. Johnson; Ardith L. Wartick

LIACP 2018; 131-135https://doi.org/10.2351/1.5056520

Abstract

View Articletitled, Laser injuries and deaths

PDF

Rapid risk analysis for high energy lasers

Erik W. F. Larson; Jerold M. Haber

LIACP 2018; 136-145https://doi.org/10.2351/1.5056521

Abstract

View Articletitled, Rapid risk analysis for high energy lasers

PDF

Determination of worst case measurement distances for class 1M and class 2M

Enrico Galbiati

LIACP 2018; 146-151https://doi.org/10.2351/1.5056522

Abstract

View Articletitled, Determination of worst case measurement distances for class 1M and class 2M

PDF

Measuring source size from diode lasers

Wesley J. Marshall

LIACP 2018; 153-156https://doi.org/10.2351/1.5056523

Abstract

View Articletitled, Measuring source size from diode lasers

PDF

Measurement techniques for safety characterization of high energy infrared lasers

Mary Gorschboth

LIACP 2018; 157https://doi.org/10.2351/1.5056524

Abstract

View Articletitled, Measurement techniques for safety characterization of high energy infrared lasers

PDF

Measurement of laser and LED beams for prediction of angular subtense

B. A. Ward

LIACP 2018; 158-167https://doi.org/10.2351/1.5056525

Abstract

View Articletitled, Measurement of laser and LED beams for prediction of angular subtense

PDF

Laser accidents: Being prepared

Ken Barat

LIACP 2018; 169-172https://doi.org/10.2351/1.5056526

Abstract

View Articletitled, Laser accidents: Being prepared

PDF

Bay area laser safety officer group

Eddie Ciprazo; Ken Barat; Dewey Sprague

LIACP 2018; 173-174https://doi.org/10.2351/1.5056527

Abstract

View Articletitled, Bay area laser safety officer group

PDF

What tools does the laser safety officer need?

Stephen Hemperly; Ken Barat

LIACP 2018; 175-178https://doi.org/10.2351/1.5056528

Abstract

View Articletitled, What tools does the laser safety officer need?

PDF

Control of laser hazards at a multidisciplinary applied research facility

Bruce Murdoch; Ralph Hinterman; Siunggoo (Sam) Joh

LIACP 2018; 179-188https://doi.org/10.2351/1.5056529

Abstract

View Articletitled, Control of laser hazards at a multidisciplinary applied research facility

PDF

Hazard control during laser service activities

J. M. Green; M. J. Barrett

LIACP 2018; 189-193https://doi.org/10.2351/1.5056530

Abstract

View Articletitled, Hazard control during laser service activities

PDF

Unresolved issue - Laser ionizing radiation hazards

Ben Edwards; Gene Moss

LIACP 2018; 199-200https://doi.org/10.2351/1.5056531

Abstract

View Articletitled, Unresolved issue - Laser ionizing radiation hazards

PDF

Material selection to reduce neutron activation in a petawatt laser target chamber

Myung Chul Jo; Steven Oberg; William McCarthy

LIACP 2018; 201-208https://doi.org/10.2351/1.5056532

Abstract

View Articletitled, Material selection to reduce neutron activation in a petawatt laser target chamber

PDF

Secondary hazards during ultra-short pulsed laser applications

T. Puester; T. Burmester; J. Bunte; S. Barcikowski; M. Brose; T. Ludwig

LIACP 2018; 209https://doi.org/10.2351/1.5056533

Abstract

View Articletitled, Secondary hazards during ultra-short pulsed laser applications

PDF

Filtration of aerosols at laser cutting process

Klaus Rabenstein

LIACP 2018; 210-211https://doi.org/10.2351/1.5056534

Abstract

View Articletitled, Filtration of aerosols at laser cutting process

PDF

Laser equipment and electrical safety - Staying informed

Arthur G. Varanelli

LIACP 2018; 212-216https://doi.org/10.2351/1.5056535

Abstract

View Articletitled, Laser equipment and electrical safety - Staying informed

PDF

Design aspects of class 1 laser enclosures for a laser-processing machine

M. J. Barrett; J. M. Green

LIACP 2018; 217-219https://doi.org/10.2351/1.5056536

Abstract

View Articletitled, Design aspects of class 1 laser enclosures for a laser-processing machine

PDF

Probabilistic risk assessment in the development of laser safety standards

David H. Sliney; Rodney L. Wood

LIACP 2018; 221-228https://doi.org/10.2351/1.5056537

Abstract

View Articletitled, Probabilistic risk assessment in the development of laser safety standards

PDF

Laser eye protection – The European experience

Roy Henderson

LIACP 2018; 249-251https://doi.org/10.2351/1.5056543

Abstract

View Articletitled, Laser eye protection – The European experience

PDF

Investigation of the irradiance-dependent spectral transmittance of laser filters in the nanosecond- and femtosecond-impuls regime in the wavelength range between 700 nm and 800 nm

A. Schirmacher; E. Sutter; O. Werhahn; U. Siegner; A. Nevejina-Sturhan

LIACP 2018; 252-261https://doi.org/10.2351/1.5056544

Abstract

View Articletitled, Investigation of the irradiance-dependent spectral transmittance of laser filters in the nanosecond- and femtosecond-impuls regime in the wavelength range between 700 nm and 800 nm

PDF

Selecting just the right laser eyewear

Catherine Scogin; Ken Barat

LIACP 2018; 262-264https://doi.org/10.2351/1.5056545

Abstract

View Articletitled, Selecting just the right laser eyewear

PDF

Assessment of safety performance of laser guards

G. Shi; P. Hilton; J. M. Green; M. J. Barrett; S. Walker

LIACP 2018; 265https://doi.org/10.2351/1.5056546

Abstract

View Articletitled, Assessment of safety performance of laser guards

PDF

Development of safety standards for free space optical communication systems

John Bell

LIACP 2018; 267-276https://doi.org/10.2351/1.5056547

Abstract

View Articletitled, Development of safety standards for free space optical communication systems

PDF

Method for hazard assessment of free space optical communication systems

Joel Brotman; John Bell

LIACP 2018; 277-286https://doi.org/10.2351/1.5056548

Abstract

View Articletitled, Method for hazard assessment of free space optical communication systems

PDF

Maximum permissible optical power for the safe and damage-free use of optical amplifiers, including Raman amplifiers

Haruo Okamura

LIACP 2018; 287-290https://doi.org/10.2351/1.5056550

Abstract

View Articletitled, Maximum permissible optical power for the safe and damage-free use of optical amplifiers, including Raman amplifiers

PDF

Safety issues in high-power optical fibre communication systems, including distributed Raman amplification systems

Masahito Tomizawa; Akira Hirano; Yutaka Miyamoto

LIACP 2018; 291-297https://doi.org/10.2351/1.5056552

Abstract

View Articletitled, Safety issues in high-power optical fibre communication systems, including distributed Raman amplification systems

PDF

Examination of threshold powers for high-power problems in optical fiber

Koji Seo; Naoya Nishimura; Masato Shiino; Renichi Yuguchi; Hirokazu Sasaki

LIACP 2018; 298-302https://doi.org/10.2351/1.5056553

Abstract

View Articletitled, Examination of threshold powers for high-power problems in optical fiber

PDF

Morphological findings after an endotracheal tube fire caused by laser surgery

Wolfgang Wöllmer; Götz Schade

LIACP 2018; 305-306https://doi.org/10.2351/1.5056554

Abstract

View Articletitled, Morphological findings after an endotracheal tube fire caused by laser surgery

PDF

Fire in the hole: An endotracheal tube fire

Rickard S. Hughes

LIACP 2018; 307-314https://doi.org/10.2351/1.5056555

Abstract

View Articletitled, Fire in the hole: An endotracheal tube fire

PDF

Endotracheal tube fires in lasersurgery - New statistical evaluations

Wolfgang Wöllmer; Andreas M. Sesterhenn; Anja-A. Duenne; Jochen A. Werner

LIACP 2018; 315https://doi.org/10.2351/1.5056556

Abstract

View Articletitled, Endotracheal tube fires in lasersurgery - New statistical evaluations

PDF

Action spectrum for photokeratitis—the importance of using a laser

Erin Chaney; David Sliney

LIACP 2018; 317-325https://doi.org/10.2351/1.5056557

Abstract

View Articletitled, Action spectrum for photokeratitis—the importance of using a laser

PDF

Studies of intraocular plasma shielding during corneal laser surgery

Ralf Kessler, Ph.D.; David H. Sliney, Ph.D.

LIACP 2018; 326-335https://doi.org/10.2351/1.5056558

Abstract

View Articletitled, Studies of intraocular plasma shielding during corneal laser surgery

PDF

Biological effects of low intensity monochromic radiant energy with a wavelength λ=605 nm, and λ=520 nm (experimental research studies)

Leonid A. Linnik; Olexander S. Pekary

LIACP 2018; 336https://doi.org/10.2351/1.5056559

Abstract

View Articletitled, Biological effects of low intensity monochromic radiant energy with a wavelength λ=605 nm, and λ=520 nm (experimental research studies)

PDF

Determining laser/LED source size with a eye-simulant camera

Charles Campbell; Stephen Dunn; David Sliney

LIACP 2018; 337-339https://doi.org/10.2351/1.5056560

Abstract

View Articletitled, Determining laser/LED source size with a eye-simulant camera

PDF

Lyon witness board (LWB) detector to evaluate thermal energy insults to skin and cornea

Terry L. Lyon; Penelope K. Galoff; Rodney L. Wood

LIACP 2018; 340-343https://doi.org/10.2351/1.5056561

Abstract

View Articletitled, Lyon witness board (LWB) detector to evaluate thermal energy insults to skin and cornea

PDF

Cellular response to 193 nm subablative irradiation

Catherine Chapel; Celine Billy; Sebastien Chanel; Daniel Courant; Francoise Hoffshir; Jean-Claude Perot

LIACP 2018; 42-49https://doi.org/10.2351/1.5056562

Abstract

View Articletitled, Cellular response to 193 nm subablative irradiation

PDF

Retinal injury thresholds for blue wavelength lasers

David J. Lund; Bruce E. Stuck

LIACP 2018; 50-56https://doi.org/10.2351/1.5056563

Abstract

View Articletitled, Retinal injury thresholds for blue wavelength lasers

PDF

Investigations concerning the blink reflex using laser class 2

Ham-Dieter Reidenbach

LIACP 2018; 57-59https://doi.org/10.2351/1.5056564

Abstract

View Articletitled, Investigations concerning the blink reflex using laser class 2

PDF

In vivo and in vitro evaluation of the corneal damage induced by 1.57 μm laser radiation

Daniel Courant; Catherine Chapel; Céline Billy; Nicole Salès; Jean-Claude Pérot; Marc Andrieux; José Garcia

LIACP 2018; 61-68https://doi.org/10.2351/1.5056565

Abstract

View Articletitled, In vivo and in vitro evaluation of the corneal damage induced by 1.57 μm laser radiation

PDF

Possible changes in laser exposure limits for extended source pulsed lasers

David H. Sliney; Rodney L. Wood

LIACP 2018; 70-85https://doi.org/10.2351/1.5056566

Abstract

View Articletitled, Possible changes in laser exposure limits for extended source pulsed lasers

PDF

Current status of the IEC 60825-4: Laser guards standard

M. J. Barrett

LIACP 2018; 88-91https://doi.org/10.2351/1.5056567

Abstract

View Articletitled, Current status of the IEC 60825-4: Laser guards standard

PDF

Optical radiation safety assessment of light emitting diodes (LEDs): Different approaches, standards and results

W. Horak; R. Neuhaus

LIACP 2018; 92-94https://doi.org/10.2351/1.5056568

Abstract

View Articletitled, Optical radiation safety assessment of light emitting diodes (LEDs): Different approaches, standards and results

PDF

TR 60825-5 manufacturer’s checklist – The “homework” guide for manufacturers IEC 60825-1 compliance

W. Strzelecki; N. Stoev

LIACP 2018; 96-100https://doi.org/10.2351/1.5056569

Abstract

View Articletitled, TR 60825-5 manufacturer’s checklist – The “homework” guide for manufacturers IEC 60825-1 compliance

PDF

PLENARY SESSIONS

Retinal exposure to femtosecond laser pulses-new mechanisms for damage

Benjamin A. Rockwell, Ph.D.

LIACP 2018; 27https://doi.org/10.2351/1.5056549

Abstract

View Articletitled, Retinal exposure to femtosecond laser pulses-new mechanisms for damage

PDF

Safety in femtosecond laser technology: Recent results of a european research project

W. Kautek; A. Hertwig; S. Martin; J. Krüger; M. Lenzner; C. Spielmann; M. Lenner; J. Bunte; T. Puester; T. Burmester; A. Fiedler; E. Heberer; M. Brose; A. Stingl; P. Kiehl; H. Hönigsmann; F. Trautinger; G. Grabner

LIACP 2018; 28-37https://doi.org/10.2351/1.5056551

Abstract

View Articletitled, Safety in femtosecond laser technology: Recent results of a european research project

PDF

LASER MATERIALS PROCESSING CONFERENCE

Section E - Forming, Cutting, Drilling and Other Applications

The influence of sheet metal anisotropy on laser forming process

Peng Cheng; Y. Lawrence Yao

LIACP 2018; 101https://doi.org/10.2351/1.5059972

Abstract

View Articletitled, The influence of sheet metal anisotropy on laser forming process

PDF

Laser sintering of complex-shaped ceramic prototypes

Anja Techel; Steffen Nowotny; Aniko Nagy; Reinhard Lenk

LIACP 2018; 102https://doi.org/10.2351/1.5059973

Abstract

View Articletitled, Laser sintering of complex-shaped ceramic prototypes

PDF

A study on the laser forming for free curve generation

Jitae Kim; Suck-Joo Na

LIACP 2018; 104https://doi.org/10.2351/1.5059974

Abstract

View Articletitled, A study on the laser forming for free curve generation

PDF

Fatigue life prediction after laser forming

Jun Zhang; Daniel Pirzada; Lloyd V. Smith; Chu Chin; J. G. Cheng

LIACP 2018; 105https://doi.org/10.2351/1.5059975

Abstract

View Articletitled, Fatigue life prediction after laser forming

PDF

Path planning strategies for laser line forming

Edward Reutzel; Kevin Gombotz; Richard Martukanitz; Panagiotis Michaleris

LIACP 2018; 106https://doi.org/10.2351/1.5059976

Abstract

View Articletitled, Path planning strategies for laser line forming

PDF

Laser forming of metal laminate composite materials

S. P. Edwardson; G. Dearden; P. French; K. G. Watkins; W. J. Cantwell

LIACP 2018; 107https://doi.org/10.2351/1.5059977

Abstract

View Articletitled, Laser forming of metal laminate composite materials

PDF

Experimental study and computer simulation on fracture toughness of sheet metal after laser forming

Jun Zhang; J. G. Cheng

LIACP 2018; 108https://doi.org/10.2351/1.5059978

Abstract

View Articletitled, Experimental study and computer simulation on fracture toughness of sheet metal after laser forming

PDF

The characteristic of laser forming aluminum sheet under consecutive irradiations

Li Liqun; Chen Yanbin; Lin Sahngyang

LIACP 2018; 109https://doi.org/10.2351/1.5059979

Abstract

View Articletitled, The characteristic of laser forming aluminum sheet under consecutive irradiations

PDF

Evolving laser processing applications

Keng H. Leong; Aravinda Kar

LIACP 2018; 501https://doi.org/10.2351/1.5060056

Abstract

View Articletitled, Evolving laser processing applications

PDF

Laser thermochemical machining of stainless steel

C. Achara; L. Li

LIACP 2018; 502https://doi.org/10.2351/1.5060057

Abstract

View Articletitled, Laser thermochemical machining of stainless steel

PDF

Laser percussion drilling of aerospace material using a 10kW peak power laser using a 400 µm optical fibre delivery system

P. W. French; M. Naeem; K. G. Watkins

LIACP 2018; 503https://doi.org/10.2351/1.5060058

Abstract

View Articletitled, Laser percussion drilling of aerospace material using a 10kW peak power laser using a 400 µm optical fibre delivery system

PDF

Drilling large diameter holes in rocks using multiple laser beams

Richard Parker; Zhiyue Xu; Claude Reed; Ramona Graves; Brian Gahan; Samih Batarseh

LIACP 2018; 504https://doi.org/10.2351/1.5060059

Abstract

View Articletitled, Drilling large diameter holes in rocks using multiple laser beams

PDF

Rock phase control by using high power laser for production enhancements

Samih Batarseh; Brian C. Gahan; Richard A. Parker; Ramona M. Graves

LIACP 2018; 505https://doi.org/10.2351/1.5060060

Abstract

View Articletitled, Rock phase control by using high power laser for production enhancements

PDF

Cutting 500 mm thick concrete using high-power lasers below 2 kW

Philip L. Crouse; Lin Li; Julian T. Spencer

LIACP 2018; 506https://doi.org/10.2351/1.5060061

Abstract

View Articletitled, Cutting 500 mm thick concrete using high-power lasers below 2 kW

PDF

Laser wire casting

Hans Gedda; Alexander Kaplan; John Powell; Katja Rüstig

LIACP 2018; 507https://doi.org/10.2351/1.5060062

Abstract

View Articletitled, Laser wire casting

PDF

Surface and adhesion characteristics of laser surface textured Ti-6Al-4V

H. C. Man; N. Q. Zhao; Z. D. Cui

LIACP 2018; 508https://doi.org/10.2351/1.5060063

Abstract

View Articletitled, Surface and adhesion characteristics of laser surface textured Ti-6Al-4V

PDF

Laser-induced dopant incorporation in wide bandgap materials: SiC and GaN

I. A. Salama; N. R. Quick; A. Kar

LIACP 2018; 509https://doi.org/10.2351/1.5060064

Abstract

View Articletitled, Laser-induced dopant incorporation in wide bandgap materials: SiC and GaN

PDF

Optimization of laser powder deposition for 316L stainless steel

Aaron C. Costello; Santhosh K. Koduri; James W. Sears

LIACP 2018; 701https://doi.org/10.2351/1.5060072

Abstract

View Articletitled, Optimization of laser powder deposition for 316L stainless steel

PDF

An FEM approach for the thermal analysis of laser cladding with pre-placed powder

L. F. Guo; T. M. Yue; H. C. Man

LIACP 2018; 703https://doi.org/10.2351/1.5060073

Abstract

View Articletitled, An FEM approach for the thermal analysis of laser cladding with pre-placed powder

PDF

Cladding of stellite 6 and VC powder on carbon steel using a YAG laser robot system

Guojian Xu; Muneharu Kutsuna

LIACP 2018; 704https://doi.org/10.2351/1.5060074

Abstract

View Articletitled, Cladding of stellite 6 and VC powder on carbon steel using a YAG laser robot system

PDF

Comparison of laser clads and overlays made with the plasma transferred arc process

Brian Slattery

LIACP 2018; 705https://doi.org/10.2351/1.5060075

Abstract

View Articletitled, Comparison of laser clads and overlays made with the plasma transferred arc process

PDF

Development and microstructural analysis of TiC/TiC-Ni coatings on 347H stainless steel using CO₂ laser scanning

Virendra Bansal; Jorge A. Ramos; David L. Bourell; Madhav Rao Govindaraju

LIACP 2018; 706https://doi.org/10.2351/1.5060076

Abstract

View Articletitled, Development and microstructural analysis of TiC/TiC-Ni coatings on 347H stainless steel using CO2 laser scanning

PDF

Laser producing particulate reinforced Fe-based MMC coatings and industrial applications

Wenjin Liu; Minlin Zhong; Mingxing Ma; Jinjiang He; Hongjun Zhang; Weiming Zhang

LIACP 2018; 708https://doi.org/10.2351/1.5060077

Abstract

View Articletitled, Laser producing particulate reinforced Fe-based MMC coatings and industrial applications

PDF

Rapid fabrication of functionally gradient material parts by laser beam

Hanhua Mei; Jiahu Ouyang; Dongming Hu; Radovan Kovacevic

LIACP 2018; 903https://doi.org/10.2351/1.5060086

Abstract

View Articletitled, Rapid fabrication of functionally gradient material parts by laser beam

PDF

A method of layer height control in direct laser fabrication of 304L stainless steel

K. G. Watkins; Eamonn Fearon

LIACP 2018; 904https://doi.org/10.2351/1.5060087

Abstract

View Articletitled, A method of layer height control in direct laser fabrication of 304L stainless steel

PDF

Finite element analysis of the thermal behaviour and its implications to the microstructure of direct laser fabricated samples

J. Mei; L. Qian; X. Wu

LIACP 2018; 905https://doi.org/10.2351/1.5060088

Abstract

View Articletitled, Finite element analysis of the thermal behaviour and its implications to the microstructure of direct laser fabricated samples

PDF

Direct metal deposition by diode laser – Modelling the effect of increased beam coupling

Andrew J. Pinkerton; Lin Li

LIACP 2018; 906https://doi.org/10.2351/1.5060089

Abstract

View Articletitled, Direct metal deposition by diode laser – Modelling the effect of increased beam coupling

PDF

The effect of diode laser beam shape and traverse direction on the direct metal deposition process

Andrew J. Pinkerton; Lin Li

LIACP 2018; 907https://doi.org/10.2351/1.5060090

Abstract

View Articletitled, The effect of diode laser beam shape and traverse direction on the direct metal deposition process

PDF

3-dimensional transient residual stress finite element analysis for laser aided direct metal deposition process

S. Ghosh; J. Choi

LIACP 2018; 908https://doi.org/10.2351/1.5060091

Abstract

View Articletitled, 3-dimensional transient residual stress finite element analysis for laser aided direct metal deposition process

PDF

Investigation of laser consolidation process for manufacturing structural components for advanced robotic mechatronics system (ARMS)

L. Xue; A. Theriault; B. Rubinger; D. Parry; F. Ranjbaran; M. Doyon

LIACP 2018; 909https://doi.org/10.2351/1.5060092

Abstract

View Articletitled, Investigation of laser consolidation process for manufacturing structural components for advanced robotic mechatronics system (ARMS)

PDF

Bevel cutting with LASOX

J Gabzdyl; J Waters

LIACP 2018; 1101https://doi.org/10.2351/1.5059980

Abstract

View Articletitled, Bevel cutting with LASOX

PDF

Cutting 50 mm thick mild steel plate with a Nd:YAG laser

James Harris; Milan Brandt

LIACP 2018; 1102https://doi.org/10.2351/1.5059981

Abstract

View Articletitled, Cutting 50 mm thick mild steel plate with a Nd:YAG laser

PDF

Laser cutting of pulps

Jari Hovikorpi; Heidi Malmberg; Petri Laakso; Antti Salminen; Veli Kujanpää; Nina Miikki

LIACP 2018; 1103https://doi.org/10.2351/1.5059982

Abstract

View Articletitled, Laser cutting of pulps

PDF

The use of laser induced processing fume as a process measurand in the feedback control of laser cutting

Leon Lobo; Karen Williams; John R. Tyrer

LIACP 2018; 1104https://doi.org/10.2351/1.5059983

Abstract

View Articletitled, The use of laser induced processing fume as a process measurand in the feedback control of laser cutting

PDF

Investigation of interaction mechanisms in laser processing using digital speckle photography

Istvan Sárady; Per Gren; Mikael Sjödahl; Alexander Kaplan

LIACP 2018; 1105https://doi.org/10.2351/1.5059984

Abstract

View Articletitled, Investigation of interaction mechanisms in laser processing using digital speckle photography

PDF

Beam focus control in rapid laser cutting

I. C. Arokiam; M. Sparkes; D. J. Brookfield; W. O’Neill

LIACP 2018; 1106https://doi.org/10.2351/1.5059985

Abstract

View Articletitled, Beam focus control in rapid laser cutting

PDF

Optimisation of melt removal in laser cutting

C. Rand; M. Sparkes; W. O’Neill; C. Sutcliffe; D. Brookfield

LIACP 2018; 1108https://doi.org/10.2351/1.5059986

Abstract

View Articletitled, Optimisation of melt removal in laser cutting

PDF

Laser welding of aluminum and steel

Seiji Katayama; Masami Mizutani

LIACP 2018; 1401https://doi.org/10.2351/1.5060003

Abstract

View Articletitled, Laser welding of aluminum and steel

PDF

Fundamental study of dual beam laser welding of zinc coated steel sheets in lap joint configuration with zero-gap

Mariana G. Forrest; Feng Lu

LIACP 2018; 1402https://doi.org/10.2351/1.5060004

Abstract

View Articletitled, Fundamental study of dual beam laser welding of zinc coated steel sheets in lap joint configuration with zero-gap

PDF

Emerging applications enabled by high power nanosecond pulsed diode pumped solid state lasers

M. Henry; P. Harrison; I. Henderson; I. Mercer; T. Nowell

LIACP 2018; 1403https://doi.org/10.2351/1.5060005

Abstract

View Articletitled, Emerging applications enabled by high power nanosecond pulsed diode pumped solid state lasers

PDF

Remote welding at high laser power

Frank Vollertsen; Thomas Seefeld; Michael Grupp

LIACP 2018; 1405https://doi.org/10.2351/1.5060006

Abstract

View Articletitled, Remote welding at high laser power

PDF

Improvement of laser welding of Zn-coated steel and aluminum alloys thin sheets using shaped laser intensity distribution

Dominique Goebels; Mathieu Kielwasser; Rémy Fabbro

LIACP 2018; 1406https://doi.org/10.2351/1.5060007

Abstract

View Articletitled, Improvement of laser welding of Zn-coated steel and aluminum alloys thin sheets using shaped laser intensity distribution

PDF

Tailored blank welding with gap driven filler wire

Adrian Sutter; Daniel Wildmann

LIACP 2018; 1408https://doi.org/10.2351/1.5060008

Abstract

View Articletitled, Tailored blank welding with gap driven filler wire

PDF

Weldability comparison of different zinc coated high strength steel sheets in laser lap joining configuration without gap

Feng Lu; Mariana G. Forrest

LIACP 2018; 1409https://doi.org/10.2351/1.5060009

Abstract

View Articletitled, Weldability comparison of different zinc coated high strength steel sheets in laser lap joining configuration without gap

PDF

Optimisation of the curvature of a laser generated single stage ceramic tile grout seal with the finite element method

K. C. Lim; J. Lawrence; L. Li; R. E. Edwards; A. W. Gale

LIACP 2018; P510https://doi.org/10.2351/1.5060152

Abstract

View Articletitled, Optimisation of the curvature of a laser generated single stage ceramic tile grout seal with the finite element method

PDF

Moisture changes during laser irradiation of tobacco leaves

L. Ponce; T. Flores; J. Menchaca; M. Hernández

LIACP 2018; P524https://doi.org/10.2351/1.5060163

Abstract

View Articletitled, Moisture changes during laser irradiation of tobacco leaves

PDF

Application of high powered lasers to perforated completions

Zhiyue Xu; Claude B. Reed; Keng H. Leong; R. A. Parker; R. M. Graves

LIACP 2018; P531https://doi.org/10.2351/1.5060167

Abstract

View Articletitled, Application of high powered lasers to perforated completions

PDF

Laser refabricating of expensive parts of the equipment in oil-field on the sea

Yang Xi-chen; Li Hui-shan; Wang Yun-shan

LIACP 2018; P532https://doi.org/10.2351/1.5060168

Abstract

View Articletitled, Laser refabricating of expensive parts of the equipment in oil-field on the sea

PDF

Three-dimensional forming of steel sheet by CO₂ laser beam

S. Yoshioka; T. Arao; T. Miyazaki; M. Nakamura

LIACP 2018; P533https://doi.org/10.2351/1.5060169

Abstract

View Articletitled, Three-dimensional forming of steel sheet by CO2 laser beam

PDF

Designed materials by direct materials deposition

Jyoti Mazumder

LIACP 2018; PL704https://doi.org/10.2351/1.5060178

Abstract

View Articletitled, Designed materials by direct materials deposition

PDF

Section D - Laser Systems and Applications

Cladding using direct diode lasers

Valdemar Malin; Richard N. Johnson

LIACP 2018; 201https://doi.org/10.2351/1.5060031

Abstract

View Articletitled, Cladding using direct diode lasers

PDF

Diode laser conversion of adhesives using semiconductor diode lasers

A. P. Hoult

LIACP 2018; 202https://doi.org/10.2351/1.5060032

Abstract

View Articletitled, Diode laser conversion of adhesives using semiconductor diode lasers

PDF

Diode laser systems for cutting applications of thin materials

Alexander Knitsch; Bernd Seme; Dieter Hoffmann; Dirk Petring; Peter Loosen; Reinhart Poprawe; Reinhard Iffländer

LIACP 2018; 203https://doi.org/10.2351/1.5060033

Abstract

View Articletitled, Diode laser systems for cutting applications of thin materials

PDF

Comparison of diode laser transformation hardening of heat treatable steels and martensitic stainless steels

Henrikki Pantsar; Veli Kujanpää

LIACP 2018; 204https://doi.org/10.2351/1.5060034

Abstract

View Articletitled, Comparison of diode laser transformation hardening of heat treatable steels and martensitic stainless steels

PDF

Effect of joint configuration on high power diode laser welding of steel

Antti Salminen; Jukka Siltanen; Anssi Jansson; Veli Kujanpää

LIACP 2018; 205https://doi.org/10.2351/1.5060035

Abstract

View Articletitled, Effect of joint configuration on high power diode laser welding of steel

PDF

High power direct diode lasers in production – Case studies

J. M. Haake; Mark S. Zediker

LIACP 2018; 206https://doi.org/10.2351/1.5060036

Abstract

View Articletitled, High power direct diode lasers in production – Case studies

PDF

High power diode laser welding of AA2024 and AISI316L

N. F. H Kerstens; I. M. Richardson; B. T. J. Stoop

LIACP 2018; 207https://doi.org/10.2351/1.5060037

Abstract

View Articletitled, High power diode laser welding of AA2024 and AISI316L

PDF

Welding of AISI 1045 steel plates by high power diode laser

A. Sánchez-Castillo; H. García-Lara; J. Pou; F. Lusquiños; F. Quintero; R. Soto; M. Boutinguiza; M. Pérez-Amor

LIACP 2018; 208https://doi.org/10.2351/1.5060038

Abstract

View Articletitled, Welding of AISI 1045 steel plates by high power diode laser

PDF

High power diode laser welding of a titanium alloy

J. Folkes; I. R. Pashby

LIACP 2018; 209https://doi.org/10.2351/1.5060039

Abstract

View Articletitled, High power diode laser welding of a titanium alloy

PDF

High peak power fiber lasers for industrial processing

Mark S. Bowers; Matthias Savage-Leuchs; Michael Steen; Larry Borschowa; Tammy Brenner; Kevin Iverson

LIACP 2018; 801https://doi.org/10.2351/1.5060078

Abstract

View Articletitled, High peak power fiber lasers for industrial processing

PDF

A compact fiber coupled high brightness diode end pumped slab laser with kW output power

C. Schnitzler; J. Giesekus; M. Leers; R. Meyer; D. Hoffmann; R. Poprawe

LIACP 2018; 802https://doi.org/10.2351/1.5060079

Abstract

View Articletitled, A compact fiber coupled high brightness diode end pumped slab laser with kW output power

PDF

New high power in-line, industrial CO₂ laser beam instrumentation for real-time monitoring

Lawrence I. Green; Gary Herrit; Huan Qi; Ashish K. Dasgupta; Peng Li; Jyoti Mazumder

LIACP 2018; 803https://doi.org/10.2351/1.5060080

Abstract

View Articletitled, New high power in-line, industrial CO2 laser beam instrumentation for real-time monitoring

PDF

On-line beam measurement of critical laser beam properties

Martin Sparkes; William O’Neill

LIACP 2018; 804https://doi.org/10.2351/1.5060081

Abstract

View Articletitled, On-line beam measurement of critical laser beam properties

PDF

Laser power measurement in industrial environment

Reinhard Kramer; Harald Schwede; Klaus Haensel; Michael Klos

LIACP 2018; 805https://doi.org/10.2351/1.5060082

Abstract

View Articletitled, Laser power measurement in industrial environment

PDF

Autonomous production cell for laser beam welding

S. Mann; A. Bollig; S. Kaierle; M. Enning; E. W. Kreutz; D. Abel; R. Poprawe

LIACP 2018; 807https://doi.org/10.2351/1.5060083

Abstract

View Articletitled, Autonomous production cell for laser beam welding

PDF

Enclosed laser processing of laminated metallised polymer films for security marking

R. Stewart; L. Li

LIACP 2018; 809https://doi.org/10.2351/1.5060084

Abstract

View Articletitled, Enclosed laser processing of laminated metallised polymer films for security marking

PDF

Spectrally beam combined diode laser bars: Efficient, near diffraction limited output power

Steve Tidwell; Steve Roman; Don Jander; Dennis Lowenthal

LIACP 2018; 1201https://doi.org/10.2351/1.5059987

Abstract

View Articletitled, Spectrally beam combined diode laser bars: Efficient, near diffraction limited output power

PDF

Laser beam propagation caustics through bifocal lenses

Charles Caristan; Frederic Camy-Peyret; Viwek Vaidya

LIACP 2018; 1202https://doi.org/10.2351/1.5059988

Abstract

View Articletitled, Laser beam propagation caustics through bifocal lenses

PDF

Characterization of CO₂ – Laser optics

Reinhard Kramer; Harald Schwede; Klaus Haensel; Michael Klos

LIACP 2018; 1203https://doi.org/10.2351/1.5059989

Abstract

View Articletitled, Characterization of CO2 – Laser optics

PDF

Computer generated holographic optics used in laser powder fusion

James Kell; John R. Tyrer; John Jones; Sara Noden

LIACP 2018; 1204https://doi.org/10.2351/1.5059990

Abstract

View Articletitled, Computer generated holographic optics used in laser powder fusion

PDF

OmniGuide fibers: An enabling technology for materials processing using high power lasers

James Goell; Gregor Dellemann; Uri Kolodny; Ori Weisberg; Torkel D. Engeness

LIACP 2018; 1205https://doi.org/10.2351/1.5059991

Abstract

View Articletitled, OmniGuide fibers: An enabling technology for materials processing using high power lasers

PDF

Design of an optical system for high power CO₂ laser cutting

D. F. de Lange; J. Meijer; J. S. Nielsen

LIACP 2018; 1206https://doi.org/10.2351/1.5059992

Abstract

View Articletitled, Design of an optical system for high power CO2 laser cutting

PDF

UV properties of laser-deposited diamond-like carbon

Sergey Lazarev; Walter W. Duley

LIACP 2018; 1207https://doi.org/10.2351/1.5059993

Abstract

View Articletitled, UV properties of laser-deposited diamond-like carbon

PDF

Solid state laser pumped by rectangular light guides from an elliptical cavity

Pedro Bernardes; Rui Martins; Dawei Liang; Margarida Pires

LIACP 2018; P501https://doi.org/10.2351/1.5060145

Abstract

View Articletitled, Solid state laser pumped by rectangular light guides from an elliptical cavity

PDF

COAXn: Modular system of powder nozzles for laser beam build-up welding

St. Nowotny; S. Scharek; F. Kempe; E. Beyer

LIACP 2018; P519https://doi.org/10.2351/1.5060160

Abstract

View Articletitled, COAXn: Modular system of powder nozzles for laser beam build-up welding

PDF

Section A - Welding

Investigations and applications of laser-arc hybrid welding from thin sheets up to heavy section components

D. Petring; C. Fuhrmann; N. Wolf; R. Poprawe

LIACP 2018; 301https://doi.org/10.2351/1.5060040

Abstract

View Articletitled, Investigations and applications of laser-arc hybrid welding from thin sheets up to heavy section components

PDF

Comparison of plasma, metal inactive gas (MIG) and tungsten inactive gas (TIG) processes for laser hybrid welding

Claus Bagger; Flemming Ove Olsen

LIACP 2018; 302https://doi.org/10.2351/1.5060041

Abstract

View Articletitled, Comparison of plasma, metal inactive gas (MIG) and tungsten inactive gas (TIG) processes for laser hybrid welding

PDF

Optimization of an innovative hybrid welding process for structural fabrication

Pete Kinney; Dave Farson

LIACP 2018; 303https://doi.org/10.2351/1.5060042

Abstract

View Articletitled, Optimization of an innovative hybrid welding process for structural fabrication

PDF

Fully integrated hybrid-laser welding control process

Nelson J. Orozco; Paul A. Blomquist; Robert B. Rudy; Steven R. Webber

LIACP 2018; 304https://doi.org/10.2351/1.5060043

Abstract

View Articletitled, Fully integrated hybrid-laser welding control process

PDF

Study of welding characteristics in CO₂ laser-TIG hybrid welding process

Chen Yanbin; Lei Zhenglong; Li Liqun

LIACP 2018; 306https://doi.org/10.2351/1.5060044

Abstract

View Articletitled, Study of welding characteristics in CO2 laser-TIG hybrid welding process

PDF

A study on the process robustness of Nd:YAG laser-MIG hybrid welding of aluminum alloy 6061-T6

Kyoung-Don Lee; Ki-Young Park

LIACP 2018; 307https://doi.org/10.2351/1.5060045

Abstract

View Articletitled, A study on the process robustness of Nd:YAG laser-MIG hybrid welding of aluminum alloy 6061-T6

PDF

CO₂-GMA hybrid welding of carbon steel – The effect of shielding gas composition

Anna Fellman; Petteri Jernström; Veli Kujanpää

LIACP 2018; 308https://doi.org/10.2351/1.5060046

Abstract

View Articletitled, CO2-GMA hybrid welding of carbon steel – The effect of shielding gas composition

PDF

Narrow gap hybrid welding of thick stainless steel

Tommi Jokinen; Miikka Karhu; Veli Kujanpää

LIACP 2018; 309https://doi.org/10.2351/1.5060047

Abstract

View Articletitled, Narrow gap hybrid welding of thick stainless steel

PDF

Laser welding of plastics - Process selection software

Ian Jones; Sam Rostami

LIACP 2018; 601https://doi.org/10.2351/1.5060065

Abstract

View Articletitled, Laser welding of plastics - Process selection software

PDF

A study of the effect of weld parameters on strengths of clearwelded^™ thermoplastics

Nicole M. Woosman; Michelle M. Burrell

LIACP 2018; 602https://doi.org/10.2351/1.5060066

Abstract

View Articletitled, A study of the effect of weld parameters on strengths of clearwelded™ thermoplastics

PDF

Specific absorbers for laser welding of colored thermoplastics

S. Abed; V. Boschat; J. Y. Charmeau; W. Knapp; P. Laurens

LIACP 2018; 603https://doi.org/10.2351/1.5060067

Abstract

View Articletitled, Specific absorbers for laser welding of colored thermoplastics

PDF

Simultaneous laser beam welding of thermoplastics – Innovations and challenges

U.-A. Russek; H. Staub; A. Palmen; H. Kind

LIACP 2018; 604https://doi.org/10.2351/1.5060068

Abstract

View Articletitled, Simultaneous laser beam welding of thermoplastics – Innovations and challenges

PDF

Welding of polymer and wood composites using laser radiation

Heinz Haferkamp; Alexander von Busse; Stephan Barcikowski; Jens Bunte

LIACP 2018; 605https://doi.org/10.2351/1.5060069

Abstract

View Articletitled, Welding of polymer and wood composites using laser radiation

PDF

Laser welding of polyolefin elastomers to thermoplastic polyolefin

D. Mark Douglass; Chung-Yuan Wu

LIACP 2018; 608https://doi.org/10.2351/1.5060070

Abstract

View Articletitled, Laser welding of polyolefin elastomers to thermoplastic polyolefin

PDF

The effect of parameters on laser transmission welding of polymers

Anssi Jansson; Saara Kouvo; Antti Salminen; Veli Kujanpää

LIACP 2018; 609https://doi.org/10.2351/1.5060071

Abstract

View Articletitled, The effect of parameters on laser transmission welding of polymers

PDF

Modeling of hybrid laser-MIG keyhole welding process

J. Zhou; H. L. Tsai; P. C. Wang; R. J. Menassa; S. P. Marin

LIACP 2018; 1001https://doi.org/10.2351/1.5059963

Abstract

View Articletitled, Modeling of hybrid laser-MIG keyhole welding process

PDF

The influence of pulse shaping on welding

Mohammed Naeem; Richard Jessett; Tom Kugler

LIACP 2018; 1002https://doi.org/10.2351/1.5059964

Abstract

View Articletitled, The influence of pulse shaping on welding

PDF

Keyhole behavior and pressure distribution during laser irradiation on molten metal

Masami Mizutani; Seiji Katayama

LIACP 2018; 1004https://doi.org/10.2351/1.5059965

Abstract

View Articletitled, Keyhole behavior and pressure distribution during laser irradiation on molten metal

PDF

Observation of keyhole behavior and melt flows during laser-arc hybrid welding

Yasuaki Naito; Masami Mizutani; Seiji Katayama

LIACP 2018; 1005https://doi.org/10.2351/1.5059966

Abstract

View Articletitled, Observation of keyhole behavior and melt flows during laser-arc hybrid welding

PDF

Power modulation in deep penetration laser welding - Optimization of frequency and waveform to prevent the porosity

Isao Kawaguchi; Susumu Tsukamoto; Hiroshi Honda; Goro Arakane

LIACP 2018; 1006https://doi.org/10.2351/1.5059967

Abstract

View Articletitled, Power modulation in deep penetration laser welding - Optimization of frequency and waveform to prevent the porosity

PDF

Keyhole behaviour in high power laser welding of thick steel plates - Formation mechanism and suppression of weld defects

Susumu Tsukamoto; Goro Arakane; Isao Kawaguchi; Hiroshi Honda

LIACP 2018; 1007https://doi.org/10.2351/1.5059968

Abstract

View Articletitled, Keyhole behaviour in high power laser welding of thick steel plates - Formation mechanism and suppression of weld defects

PDF

Recoil force measurements during pulsed Nd:YAG laser spot welds

Gerald A. Knorovsky; Danny O. MacCallum

LIACP 2018; 1008https://doi.org/10.2351/1.5059969

Abstract

View Articletitled, Recoil force measurements during pulsed Nd:YAG laser spot welds

PDF

Modeling of weld pool dynamics during dual-beam laser welding process

J. Hu; H. L. Tsai; Y. K. Lee

LIACP 2018; 1009https://doi.org/10.2351/1.5059970

Abstract

View Articletitled, Modeling of weld pool dynamics during dual-beam laser welding process

PDF

Ultrafine-keyhole welding process using single-mode fiber laser

Isamu Miyamoto; Seo-jeong Park; Toshihiko Ooie

LIACP 2018; 1010https://doi.org/10.2351/1.5059971

Abstract

View Articletitled, Ultrafine-keyhole welding process using single-mode fiber laser

PDF

An investigation of laser spot weld variability in Kovar lap joints

Phillip Fuerschbach; Jerome Norris; Gary Pressly

LIACP 2018; 1701https://doi.org/10.2351/1.5060024

Abstract

View Articletitled, An investigation of laser spot weld variability in Kovar lap joints

PDF

An exploratory investigation of Nd:YAG laser welding in high pressure gaseous environments

Paul Hilton; Martin Ogle; David Taylor; Paul Lurie; Roger D. Howard

LIACP 2018; 1702https://doi.org/10.2351/1.5060025

Abstract

View Articletitled, An exploratory investigation of Nd:YAG laser welding in high pressure gaseous environments

PDF

Recent results in high power CO₂-laser cutting for shipbuilding industry

Flemming Olsen; Thomas Winther Juhl; Jakob Skov Nielsen

LIACP 2018; 1704https://doi.org/10.2351/1.5060026

Abstract

View Articletitled, Recent results in high power CO2-laser cutting for shipbuilding industry

PDF

Industrial laser welded all steel sandwich panels applications in Finland

Anssi Jansson; Antti Salminen; Marko Liski; Pentti Kujala

LIACP 2018; 1705https://doi.org/10.2351/1.5060027

Abstract

View Articletitled, Industrial laser welded all steel sandwich panels applications in Finland

PDF

The challenges of welding mixed materials with Nd:YAG lasers

David Lavoie; Ronald Holtz

LIACP 2018; 1706https://doi.org/10.2351/1.5060028

Abstract

View Articletitled, The challenges of welding mixed materials with Nd:YAG lasers

PDF

Welding experiments using vacuum enviroment with Nd:YAG-Laser

Miikka Karhu; Tommi Jokinen; Veli Kujanpää

LIACP 2018; 1708https://doi.org/10.2351/1.5060029

Abstract

View Articletitled, Welding experiments using vacuum enviroment with Nd:YAG-Laser

PDF

Improvement of weld quality with beam-weavinglaser welding

Xudong Zhang; Wuzhu Chen; Gang Bao

LIACP 2018; 1709https://doi.org/10.2351/1.5060030

Abstract

View Articletitled, Improvement of weld quality with beam-weavinglaser welding

PDF

Experimental results of laser welding of zinc coated steel sheets with a new method

M. M. S. Gualini; F. Grassi

LIACP 2018; P507https://doi.org/10.2351/1.5060149

Abstract

View Articletitled, Experimental results of laser welding of zinc coated steel sheets with a new method

PDF

Solidification features of the thin steel sheets in keyhole welding

M. Y. Krasnoperov; R. R. G. M. Pieters; I. M. Richardson

LIACP 2018; P509https://doi.org/10.2351/1.5060151

Abstract

View Articletitled, Solidification features of the thin steel sheets in keyhole welding

PDF

Laser welding of high strength steels

R. R. G. M. Pieters; M. Y. Krasnoperov; I. M. Richardson

LIACP 2018; P522https://doi.org/10.2351/1.5060162

Abstract

View Articletitled, Laser welding of high strength steels

PDF

Research on laser welding of BT20 titanium alloy

S. L. Gong; L. Chen; W. Yao; Y. Tang

LIACP 2018; P545https://doi.org/10.2351/1.5060176

Abstract

View Articletitled, Research on laser welding of BT20 titanium alloy

PDF

Section C - Sensing, Monitoring, Materials Interaction and Modeling

Recent developments in laser induced breakdown spectroscopy, an analytical technique for real-time, in-the-field applications

Leon Radziemski

LIACP 2018; 401https://doi.org/10.2351/1.5060048

Abstract

View Articletitled, Recent developments in laser induced breakdown spectroscopy, an analytical technique for real-time, in-the-field applications

PDF

Online multi-elemental analysis using laser-induced breakdown Spectrometry (LIBS) – Research fields, industrial applications and future perspectives

Reinhard Noll; Frank Hilbk-Kortenbruck; Christoph Janzen; Oliver Klein; Joachim Makowe; Volker Sturm; Holger Bette; Adriane Brysch; Jens Vrenegor

LIACP 2018; 402https://doi.org/10.2351/1.5060049

Abstract

View Articletitled, Online multi-elemental analysis using laser-induced breakdown Spectrometry (LIBS) – Research fields, industrial applications and future perspectives

PDF

Combustion system analysis using laser-induced breakdown spectroscopy

Steven G. Buckley; Francesco Ferioli; Gregg A. Lithgow

LIACP 2018; 403https://doi.org/10.2351/1.5060050

Abstract

View Articletitled, Combustion system analysis using laser-induced breakdown spectroscopy

PDF

Analysis of biological tissues by laser induced breakdown spectroscopy technique

M. Corsi; G. Cristoforetti; M. Giuffrida; M. Hidalgo; S. Legnaioli; V. Palleschi; A. Salvetti; E. Tognoni; C. Vallebona

LIACP 2018; 404https://doi.org/10.2351/1.5060051

Abstract

View Articletitled, Analysis of biological tissues by laser induced breakdown spectroscopy technique

PDF

Development of laser-induced breakdown spectroscopy for planetary surface exploration

David Cremers; Ekaterina Sevostiyanova; Leslie Gibson; Zane Arp; Ronnie Harris; Roger Wiens; Sylvestre Maurice

LIACP 2018; 405https://doi.org/10.2351/1.5060052

Abstract

View Articletitled, Development of laser-induced breakdown spectroscopy for planetary surface exploration

PDF

Laser-induced breakdown spectroscopy: A new tool for materials analysis

Mohamad Sabsabi; Vincent Detalle; Louis St-Onge

LIACP 2018; 406https://doi.org/10.2351/1.5060053

Abstract

View Articletitled, Laser-induced breakdown spectroscopy: A new tool for materials analysis

PDF

Laser-induced breakdown spectroscopy during laser ablation of cavity structures

R. E. Russo; S. S. Mao; X. Zeng; X. Mao

LIACP 2018; 408https://doi.org/10.2351/1.5060054

Abstract

View Articletitled, Laser-induced breakdown spectroscopy during laser ablation of cavity structures

PDF

Two-dimensional mapping of elements on surfaces using line spark laser-induced breakdown spectroscopy

Kit T. Rodolfa; David A. Cremers

LIACP 2018; 410https://doi.org/10.2351/1.5060055

Abstract

View Articletitled, Two-dimensional mapping of elements on surfaces using line spark laser-induced breakdown spectroscopy

PDF

Online detection of defect classes for laser beam welding

J. Ortmann; E. W. Kreutz; C. Maier; T. Wehner; M. Kogel-Hollacher; S. Kaierle; R. Poprawe

LIACP 2018; 1301https://doi.org/10.2351/1.5059994

Abstract

View Articletitled, Online detection of defect classes for laser beam welding

PDF

Machine vision – The powerful tool for quality assurance of laser welding and brazing

Martin Halschka; Joachim Schwarz; Daniel Wildmann; Frank Wagner

LIACP 2018; 1302https://doi.org/10.2351/1.5059995

Abstract

View Articletitled, Machine vision – The powerful tool for quality assurance of laser welding and brazing

PDF

Path planning strategies for laser line forming

Edward Reutzel; Kevin Gombotz; Richard Martukanitz; Panagiotis Michaleris

LIACP 2018; 1303https://doi.org/10.2351/1.5059996

Abstract

View Articletitled, Path planning strategies for laser line forming

PDF

Non-destructive evaluation of laser welds in tailor-welded blanks using magnetic flux leakage

Aaron Montgomery; Peter Hook; Lynann Clapham; Peter Wild

LIACP 2018; 1304https://doi.org/10.2351/1.5059997

Abstract

View Articletitled, Non-destructive evaluation of laser welds in tailor-welded blanks using magnetic flux leakage

PDF

High speed x-ray analysis of ferrous alloys

H. Haferkamp; S. Czerner; A. Ostendorf; J. Bunte; H. Becker

LIACP 2018; 1306https://doi.org/10.2351/1.5059998

Abstract

View Articletitled, High speed x-ray analysis of ferrous alloys

PDF

Improvement of weld quality with beam-weavinglaser welding

Xudong Zhang; Wuzhu Chen; Gang Bao

LIACP 2018; 1307https://doi.org/10.2351/1.5059999

Abstract

View Articletitled, Improvement of weld quality with beam-weavinglaser welding

PDF

Feedback control effects on dimensions and defects of H13 tool steel by DMD process

Y. Hua; J. Choi

LIACP 2018; 1308https://doi.org/10.2351/1.5060000

Abstract

View Articletitled, Feedback control effects on dimensions and defects of H13 tool steel by DMD process

PDF

Development of a miniaturized and instrumented Nd:YAG cutting and welding tool

F. Coste; G. Chappuis; M. Muller

LIACP 2018; 1309https://doi.org/10.2351/1.5060001

Abstract

View Articletitled, Development of a miniaturized and instrumented Nd:YAG cutting and welding tool

PDF

Closed-loop control of laser cladding process by powder injection

E. Toyserkani; A. Khajepour; S. Corbin

LIACP 2018; 1310https://doi.org/10.2351/1.5060002

Abstract

View Articletitled, Closed-loop control of laser cladding process by powder injection

PDF

HPC approach to the fully transient, three dimensional laser materials processing simulation software (ftLMPs) with particular focus on laser cutting

Markus Gross; Ian Black; Wolfgang H. Müller

LIACP 2018; 1602https://doi.org/10.2351/1.5060018

Abstract

View Articletitled, HPC approach to the fully transient, three dimensional laser materials processing simulation software (ftLMPs) with particular focus on laser cutting

PDF

Temperature measurement of laser arc hybrid welding plasma

Youngtae Cho; Suck-Joo Na

LIACP 2018; 1603https://doi.org/10.2351/1.5060019

Abstract

View Articletitled, Temperature measurement of laser arc hybrid welding plasma

PDF

Absorption of laser energy by a welding arc

B. Hu; I. M. Richardson

LIACP 2018; 1604https://doi.org/10.2351/1.5060020

Abstract

View Articletitled, Absorption of laser energy by a welding arc

PDF

Modelling and observation of laser welding: The effect of latent heat

D. F. de Lange; S. Postma; J. Meijer

LIACP 2018; 1605https://doi.org/10.2351/1.5060021

Abstract

View Articletitled, Modelling and observation of laser welding: The effect of latent heat

PDF

Laser-vapour interaction in high-power cw Nd:YAG laser welding

J. Greses; P. A. Hilton; C. Y. Barlow; W. M. Steen

LIACP 2018; 1606https://doi.org/10.2351/1.5060022

Abstract

View Articletitled, Laser-vapour interaction in high-power cw Nd:YAG laser welding

PDF

Numerical modeling of laser repair process and stress analysis

L. Han; F. W. Liou

LIACP 2018; 1608https://doi.org/10.2351/1.5060023

Abstract

View Articletitled, Numerical modeling of laser repair process and stress analysis

PDF

Empirical model of welding depth in pulsed Nd:YAG laser and its application to thermal simulation

C. Décombard; E. Lariotte; N. Lecler

LIACP 2018; P503https://doi.org/10.2351/1.5060146

Abstract

View Articletitled, Empirical model of welding depth in pulsed Nd:YAG laser and its application to thermal simulation

PDF

Laser cuttig model based on artificial intelligence

G. Casalino; A. D. Ludovico; F. Memola Capece Minutolo; V. Sergi

LIACP 2018; P504https://doi.org/10.2351/1.5060147

Abstract

View Articletitled, Laser cuttig model based on artificial intelligence

PDF

Melt behavior and its effect on process speed in precision cutting of thin metal sheets using Q-switched Nd:YAG green laser

Yonggang Li; Greg Anderson

LIACP 2018; P511https://doi.org/10.2351/1.5060153

Abstract

View Articletitled, Melt behavior and its effect on process speed in precision cutting of thin metal sheets using Q-switched Nd:YAG green laser

PDF

Laser-vapour interaction in high-power cw Nd:YAG laser welding

J. Greses; P. A. Hilton; C. Y. Barlow; W. M. Steen

LIACP 2018; P546https://doi.org/10.2351/1.5060177

Abstract

View Articletitled, Laser-vapour interaction in high-power cw Nd:YAG laser welding

PDF

Section E - Forming, Cutting, drilling and Other Applications

Laser 3D prototypes forming from metal and ceramic materials

V. Kovalenko; M. Anyakin; W. Duley; J. Meijer; D. Roessler

LIACP 2018; 901https://doi.org/10.2351/1.5060085

Abstract

View Articletitled, Laser 3D prototypes forming from metal and ceramic materials

PDF

Section B - Surface Modification

Spatially resolved characterization of residual stress induced by micro scale laser shock Peening

Hongqiang Chen; Y. Lawrence Yao; Jeffrey W. Kysar

LIACP 2018; 1501https://doi.org/10.2351/1.5060010

Abstract

View Articletitled, Spatially resolved characterization of residual stress induced by micro scale laser shock Peening

PDF

Study of plasma induced by laser in water confinement regime: Application to laser shock processing with and without thermal protective coating

Laurent Berthe; Arnaud Sollier; Patrice Peyre; Remy Fabbro

LIACP 2018; 1502https://doi.org/10.2351/1.5060011

Abstract

View Articletitled, Study of plasma induced by laser in water confinement regime: Application to laser shock processing with and without thermal protective coating

PDF

Effect of overlaps on microstructure and corrosion performance of large area laser-treated 304L stainless steel

P. H. Chong; Z. Liu; P. Skeldon; D. Coulibaly

LIACP 2018; 1503https://doi.org/10.2351/1.5060012

Abstract

View Articletitled, Effect of overlaps on microstructure and corrosion performance of large area laser-treated 304L stainless steel

PDF

High speed cleaning of railheads with a fiber-coupled Nd:YAG laser

M. Traub; R. Meyer; H.-D. Hoffmann; P. Loosen; R. Poprawe; M. Higgins

LIACP 2018; 1504https://doi.org/10.2351/1.5060013

Abstract

View Articletitled, High speed cleaning of railheads with a fiber-coupled Nd:YAG laser

PDF

High-rate, large area laser deposition of nickel on polymer substrates

Vladimir Paserin; Steve Stromness; Walter W. Duley

LIACP 2018; 1505https://doi.org/10.2351/1.5060014

Abstract

View Articletitled, High-rate, large area laser deposition of nickel on polymer substrates

PDF

Influence of laser glazing on properties of diffusion borided layers

S. M. Shariff; Vipin Jain; G. Sundararajan; S. V. Joshi

LIACP 2018; 1506https://doi.org/10.2351/1.5060015

Abstract

View Articletitled, Influence of laser glazing on properties of diffusion borided layers

PDF

Influence of heat treatment on microstructure of laser powder deposited Ni20Al30Fe intermetallic alloy

Xiangyang Xu; Minlin Zhong; Wenjin Liu; Hongqing Sun

LIACP 2018; 1507https://doi.org/10.2351/1.5060016

Abstract

View Articletitled, Influence of heat treatment on microstructure of laser powder deposited Ni20Al30Fe intermetallic alloy

PDF

An investigation of the water absorption characteristics of a laser generated glaze on the ordinary Portland cement surface of concrete

C. B. Ho; J. Lawrence; L. Hao

LIACP 2018; 1509https://doi.org/10.2351/1.5060017

Abstract

View Articletitled, An investigation of the water absorption characteristics of a laser generated glaze on the ordinary Portland cement surface of concrete

PDF

Surface modification of refractory ceramic using combined flame spraying and laser surface coating

J. F. Li; L. Li; F. H. Stott

LIACP 2018; P512https://doi.org/10.2351/1.5060154

Abstract

View Articletitled, Surface modification of refractory ceramic using combined flame spraying and laser surface coating

PDF

Laser surfacing of AISI 316 stainless steel using niticu for enhancing cavitation erosion resistance

F. T. Cheng; K. H. Lo; H. C. Man

LIACP 2018; P515https://doi.org/10.2351/1.5060157

Abstract

View Articletitled, Laser surfacing of AISI 316 stainless steel using niticu for enhancing cavitation erosion resistance

PDF

Laser surface engineering for improving cavitation erosion and corrosion resistance of manganese nickel aluminium bronze

C. H. Tang; F. T. Cheng; H. C. Man

LIACP 2018; P542https://doi.org/10.2351/1.5060173

Abstract

View Articletitled, Laser surface engineering for improving cavitation erosion and corrosion resistance of manganese nickel aluminium bronze

PDF

LASER MICROFABRICATION CONFERENCE PROCEEDINGS

Section C - Photonics Microfabrication

UV-laser modification of polymers for the optical information technology

Simeon Metev; Carsten Wochnowski; Frank Vollertsen

LIACP 2018; M101https://doi.org/10.2351/1.5060093

Abstract

View Articletitled, UV-laser modification of polymers for the optical information technology

PDF

Form birefringence anisotropic reflection and negative index change created by fs direct writing in transparent materials

Erica Bricchi; Bruce G. Klappauf; Peter G. Kazansky

LIACP 2018; M102https://doi.org/10.2351/1.5060094

Abstract

View Articletitled, Form birefringence anisotropic reflection and negative index change created by fs direct writing in transparent materials

PDF

Manufacturing of high quality integrated optical components by laser direct-write

Ph. Bado; A. A. Said; Mark Dugan

LIACP 2018; M103https://doi.org/10.2351/1.5060095

Abstract

View Articletitled, Manufacturing of high quality integrated optical components by laser direct-write

PDF

Fabrication of hemispherical cavity arrays on silicon substrates using laser-assisted nanoimprinting

L. P. Li; Y. F. Lu; J. Shi; D. W. Doerr; D. R. Alexander; K. G. Zhu

LIACP 2018; M105https://doi.org/10.2351/1.5060096

Abstract

View Articletitled, Fabrication of hemispherical cavity arrays on silicon substrates using laser-assisted nanoimprinting

PDF

Ultrashort pulse laser machining of microchannels in polymers and glass materials for fabrication of a microfluidic optical switch

H. Y. Zheng; H. Liu; S. Wan; G. C. Lim; S. Nikumb; Q. Chen

LIACP 2018; M106https://doi.org/10.2351/1.5060097

Abstract

View Articletitled, Ultrashort pulse laser machining of microchannels in polymers and glass materials for fabrication of a microfluidic optical switch

PDF

Laser-assisted fabrication of micro-optical components

Michael Schmidt; Manfred Dirscherl; Stefan Kaufmann; Markus Stark

LIACP 2018; M107https://doi.org/10.2351/1.5060098

Abstract

View Articletitled, Laser-assisted fabrication of micro-optical components

PDF

Laser induced refractive index changes in aluminosilicate glass using femtosecond laser pulses

D. K. Y. Low; H. Qiu; Z. Xiong; G. C. Lim

LIACP 2018; M108https://doi.org/10.2351/1.5060099

Abstract

View Articletitled, Laser induced refractive index changes in aluminosilicate glass using femtosecond laser pulses

PDF

Direct fabrication of waveguiding structures with a femtosecond laser

Arnaud Zoubir; Martin Richardson; Clara Rivero; Cedric Lopez; Kathleen C. Richardson

LIACP 2018; M109https://doi.org/10.2351/1.5060100

Abstract

View Articletitled, Direct fabrication of waveguiding structures with a femtosecond laser

PDF

Final glass products in one processing step by the means of laser radiation

H. K. Tönshoff; A. Ostendorf; C. Kulik; H. Hesener; O. Haupt

LIACP 2018; M110https://doi.org/10.2351/1.5060101

Abstract

View Articletitled, Final glass products in one processing step by the means of laser radiation

PDF

Section A - Fundamental Investigations

Ultrafine-keyhole welding process using single-mode fiber laser

Isamu Miyamoto; Seo-jeong Park; Toshihiko Ooie

LIACP 2018; M201https://doi.org/10.2351/1.5060102

Abstract

View Articletitled, Ultrafine-keyhole welding process using single-mode fiber laser

PDF

Laser beam micro welding of dissimilar metals

Kilian Klages; Christoph Ruettimann; Alexander Olowinsky

LIACP 2018; M202https://doi.org/10.2351/1.5060103

Abstract

View Articletitled, Laser beam micro welding of dissimilar metals

PDF

Laser micro-welding of 40G optoelectronic butterfly package with submicron post weld shift

Jeff Lu; Zhili Feng

LIACP 2018; M203https://doi.org/10.2351/1.5060104

Abstract

View Articletitled, Laser micro-welding of 40G optoelectronic butterfly package with submicron post weld shift

PDF

Micro welding of thin stainless steel foil with a direct diode laser

Yoshinori Funada; Nobuyuki Abe

LIACP 2018; M204https://doi.org/10.2351/1.5060105

Abstract

View Articletitled, Micro welding of thin stainless steel foil with a direct diode laser

PDF

Hermetic laser welded encapsulations for electronic components

Toni Vesansalo; Henrikki Pantsar; Jukka Martikainen

LIACP 2018; M205https://doi.org/10.2351/1.5060106

Abstract

View Articletitled, Hermetic laser welded encapsulations for electronic components

PDF

Quantifying stresses induced by laser micromachining using micro-Raman spectroscopy

Maher S. Amer; Mostafa El-Ashry; Kenneth E. Hix; Bryan S. Irwin; Larry R. Dosser

LIACP 2018; M302https://doi.org/10.2351/1.5060111

Abstract

View Articletitled, Quantifying stresses induced by laser micromachining using micro-Raman spectroscopy

PDF

Characteristics investigation of high power CO₂ laser micro-grooving of steel samples

H. Hamamura; T. Sakai; M. Kido; N. Hamada

LIACP 2018; M303https://doi.org/10.2351/1.5060112

Abstract

View Articletitled, Characteristics investigation of high power CO2 laser micro-grooving of steel samples

PDF

Parameters and quality control by pulsed Nd:YAG laser cutting

Xiangyou Li; Xiaoyan Zeng

LIACP 2018; M305https://doi.org/10.2351/1.5060113

Abstract

View Articletitled, Parameters and quality control by pulsed Nd:YAG laser cutting

PDF

The future of lasers in electronics

M. Schmidt; G. Eßer

LIACP 2018; M306https://doi.org/10.2351/1.5060114

Abstract

View Articletitled, The future of lasers in electronics

PDF

The mechanisms of photoluminescence from Si nanocrystals formed by pulsed-laser deposition

X. Y. Chen; Y. F. Lu; Y. H. Wu; B. J. Cho

LIACP 2018; M307https://doi.org/10.2351/1.5060115

Abstract

View Articletitled, The mechanisms of photoluminescence from Si nanocrystals formed by pulsed-laser deposition

PDF

Picosecond lasers in micromachining

Gediminas Račiukaitis; Saulius Jacinavičius; Marijus Brikas; Stanislovas Balickas

LIACP 2018; M308https://doi.org/10.2351/1.5060116

Abstract

View Articletitled, Picosecond lasers in micromachining

PDF

Process optimization in precision laser cutting of thin stainless steel sheets

Yonggang Li; Greg Anderson

LIACP 2018; M309https://doi.org/10.2351/1.5060117

Abstract

View Articletitled, Process optimization in precision laser cutting of thin stainless steel sheets

PDF

UV laser machining of biomaterial composite

Hongseok Choi; Xiaochun Li

LIACP 2018; M310https://doi.org/10.2351/1.5060118

Abstract

View Articletitled, UV laser machining of biomaterial composite

PDF

Microstructure formation on metal surface by femtosecond laser and its molecular dynamics simulation

Tomohiro Okamoto; Etsuji Ohmura; Tomokazu Sano; Yukio Morishige; Isamu Miyamoto

LIACP 2018; M501https://doi.org/10.2351/1.5060128

Abstract

View Articletitled, Microstructure formation on metal surface by femtosecond laser and its molecular dynamics simulation

PDF

Simulation of short-pulse laser interaction with matter using finite-difference time-domain method and two temperature model

Hyungson Ki; Jyoti Mazumder

LIACP 2018; M502https://doi.org/10.2351/1.5060129

Abstract

View Articletitled, Simulation of short-pulse laser interaction with matter using finite-difference time-domain method and two temperature model

PDF

Ultrashort pulse laser material removal by Coulomb explosion

Jun Ho Park; Cho Lik Chan

LIACP 2018; M503https://doi.org/10.2351/1.5060130

Abstract

View Articletitled, Ultrashort pulse laser material removal by Coulomb explosion

PDF

Processing thin silicon with ultrashort-pulsed lasers: Creating an alternative to conventional sawing techniques

Andreas Ostendorf; Christian Kulik; Niko Bärsch

LIACP 2018; M504https://doi.org/10.2351/1.5060131

Abstract

View Articletitled, Processing thin silicon with ultrashort-pulsed lasers: Creating an alternative to conventional sawing techniques

PDF

Pulse width effect in ultrafast laser micromachining

Ching-Yuan Chien; Mool C. Gupta; Arnd Kruger; Philippe Feru; Bruce Craig

LIACP 2018; M505https://doi.org/10.2351/1.5060132

Abstract

View Articletitled, Pulse width effect in ultrafast laser micromachining

PDF

Nanostructural investigations on ripples prepared by femtosecond laser treatment of silicon

Thomas Höche; David Ruthe; Frank Frost; Tino Petsch

LIACP 2018; M508https://doi.org/10.2351/1.5060133

Abstract

View Articletitled, Nanostructural investigations on ripples prepared by femtosecond laser treatment of silicon

PDF

Burst-mode femtosecond ablation of materials

R. Bernath; J. Duncan; P. Gonzales; A. Zoubir; N. Vorobiev; T. Olmstead; C. W. Siders; M. Richardson

LIACP 2018; M509https://doi.org/10.2351/1.5060134

Abstract

View Articletitled, Burst-mode femtosecond ablation of materials

PDF

Nanostructuring using laser-assisted scanning probe microscope

J. Shi; Y. F. Lu; L. P. Li; L. Yan; K. Niu; B. Hu; Z. H. Mai

LIACP 2018; P513https://doi.org/10.2351/1.5060155

Abstract

View Articletitled, Nanostructuring using laser-assisted scanning probe microscope

PDF

Femtosecond ablation scaling for different materials

P. Gonzales; R. Bernath; J. Duncan; T. Olmstead; M. Richardson; N. Vorobiev

LIACP 2018; P527https://doi.org/10.2351/1.5060166

Abstract

View Articletitled, Femtosecond ablation scaling for different materials

PDF

Determination of optimal 3D micromaching parameters of hole area modulation (HAM) method

K. H. Choi; J. Meijer; T. Masuzawa; S. S. Kim; K. H. Na

LIACP 2018; P544https://doi.org/10.2351/1.5060175

Abstract

View Articletitled, Determination of optimal 3D micromaching parameters of hole area modulation (HAM) method

PDF

Section E - Biomedical Devices and Microsystems Fabrication

High power semiconductor red laser arrays for biomedical applications

Ivan Charamisinau; Gemunu Happawana; Gary Evans; Jay Kirk

LIACP 2018; M206https://doi.org/10.2351/1.5060107

Abstract

View Articletitled, High power semiconductor red laser arrays for biomedical applications

PDF

Manufacturing of ceramic dental prosthesis with ultra-short laser pulses

Kristian Werelius; Paul Weigl

LIACP 2018; M207https://doi.org/10.2351/1.5060108

Abstract

View Articletitled, Manufacturing of ceramic dental prosthesis with ultra-short laser pulses

PDF

Red laser insert with uniform illumination for use in photodynamic therapy

Ivan Charamisinau; Gemunu Happawana; Gary Evans; Arye Rosen; Richard A. Hsi

LIACP 2018; M208https://doi.org/10.2351/1.5060109

Abstract

View Articletitled, Red laser insert with uniform illumination for use in photodynamic therapy

PDF

Laser treatment of selected bio-metals for improved biocompatibility

H. R. Chew; J. Lawrence; C. K. Chong; L. Hao

LIACP 2018; M209https://doi.org/10.2351/1.5060110

Abstract

View Articletitled, Laser treatment of selected bio-metals for improved biocompatibility

PDF

Laser ablation deposition of Ni-superalloy thin films

Ulrich Klug; Peng Li; Jyoti Mazumder

LIACP 2018; M701https://doi.org/10.2351/1.5060139

Abstract

View Articletitled, Laser ablation deposition of Ni-superalloy thin films

PDF

Mesoscale laser processing using excimer and short-pulse Ti:Sapphire lasers

M. D. Shirk; A. M. Rubenchik; G. H. Gilmer; B. C. Stuart; J. P. Armstrong; S. K. Oberhelman; S. L. Baker; A. J. Nikitin; R. P. Mariella, Jr.

LIACP 2018; M702https://doi.org/10.2351/1.5060140

Abstract

View Articletitled, Mesoscale laser processing using excimer and short-pulse Ti:Sapphire lasers

PDF

Material ejection during drilling with a long pulse excimer laser

Aart Schoonderbeek; Cornelis A. Biesheuvel; Ramon M. Hofstra; Klaus-J. Boller; Johan Meijer

LIACP 2018; M704https://doi.org/10.2351/1.5060141

Abstract

View Articletitled, Material ejection during drilling with a long pulse excimer laser

PDF

The investigation on laser microfabrication with metallic powder

Chen Jimin; Chen Tao; Liu Shibin; Zuo Tiechuan

LIACP 2018; M705https://doi.org/10.2351/1.5060142

Abstract

View Articletitled, The investigation on laser microfabrication with metallic powder

PDF

Laser processing of glass and plastic for microfluidics applications

E. K. Illy; A. Whybrew; T. Nicholls; M. Knowles

LIACP 2018; M707https://doi.org/10.2351/1.5060143

Abstract

View Articletitled, Laser processing of glass and plastic for microfluidics applications

PDF

Experimental study on laser milling of glass

Yuan Genfu; Zeng Xiaoyan

LIACP 2018; M709https://doi.org/10.2351/1.5060144

Abstract

View Articletitled, Experimental study on laser milling of glass

PDF

MEMS package glass cover detachment using CO₂ laser induced crack propagation

Brooke M. Nowak-Neely; Danny O. MacCallum; Gerald A. Knorovsky

LIACP 2018; P514https://doi.org/10.2351/1.5060156

Abstract

View Articletitled, MEMS package glass cover detachment using CO2 laser induced crack propagation

PDF

Laser microwelding of polystyrene and polycarbonate

David Grewell; Avraham Benatar

LIACP 2018; P537https://doi.org/10.2351/1.5060171

Abstract

View Articletitled, Laser microwelding of polystyrene and polycarbonate

PDF

Study and manufacture of a novel micro-deformable mirror

Hongbin Yu; Haiqing Chen; Zimin Zhu; Chao Wang; Dacheng Zhang; Ting Li

LIACP 2018; P541https://doi.org/10.2351/1.5060172

Abstract

View Articletitled, Study and manufacture of a novel micro-deformable mirror

PDF

Section D - Electronics Processing

The laser microjet^® technology – 10 years of development

Frank Wagner; Ochélio Sibailly; Nandor Vágó; Rafal Romanowicz; Bernold Richerzhagen

LIACP 2018; M401https://doi.org/10.2351/1.5060119

Abstract

View Articletitled, The laser microjet® technology – 10 years of development

PDF

Laser trimming of embedded passive components

Bo Gu

LIACP 2018; M402https://doi.org/10.2351/1.5060120

Abstract

View Articletitled, Laser trimming of embedded passive components

PDF

Micro-via drilling applications with solid-state harmonic UV laser systems

Weisheng Lei; John Davignon

LIACP 2018; M403https://doi.org/10.2351/1.5060121

Abstract

View Articletitled, Micro-via drilling applications with solid-state harmonic UV laser systems

PDF

Advances in laser beam micro forming for micropositioning

Alexander Olowinsky; Lüdger Bosse

LIACP 2018; M404https://doi.org/10.2351/1.5060122

Abstract

View Articletitled, Advances in laser beam micro forming for micropositioning

PDF

Laser micromachining of indium tin oxide on polymer substrates

David A. Willis

LIACP 2018; M405https://doi.org/10.2351/1.5060124

Abstract

View Articletitled, Laser micromachining of indium tin oxide on polymer substrates

PDF

Laser surface cleaning and its applications in data storage and microelectronics industries

Y. F. Lu

LIACP 2018; M407https://doi.org/10.2351/1.5060125

Abstract

View Articletitled, Laser surface cleaning and its applications in data storage and microelectronics industries

PDF

Laser wafer marking at die level

Bo Gu

LIACP 2018; M408https://doi.org/10.2351/1.5060126

Abstract

View Articletitled, Laser wafer marking at die level

PDF

An experimental study of laser micro-forming using a pulsed Nd:YAG laser and scanning optics

G. Dearden; C. Taylor; K. Bartkowiak; S. P. Edwardson; K. G. Watkins

LIACP 2018; M409https://doi.org/10.2351/1.5060127

Abstract

View Articletitled, An experimental study of laser micro-forming using a pulsed Nd:YAG laser and scanning optics

PDF

Ultrafast laser lithography using self-assembled monolayers (SAMs)

Wonseok Chang; Moojin Choi; Bosung Shin; Jaegu Kim; Kyunghyun Whang

LIACP 2018; P505https://doi.org/10.2351/1.5060148

Abstract

View Articletitled, Ultrafast laser lithography using self-assembled monolayers (SAMs)

PDF

Thin wafer cutting with laser microjet^® at infineon - A case study

Ochélio Sibailly; Rafal Romanowicz; Laetita Mayor; Bernold Richerzhagen

LIACP 2018; P516https://doi.org/10.2351/1.5060158

Abstract

View Articletitled, Thin wafer cutting with laser microjet® at infineon - A case study

PDF

Drift of electrons and impurity atoms by induced laser radiation in semiconductor crystals

Krupa Mykola; Skyrta Yuri; Zacharov Roman

LIACP 2018; P518https://doi.org/10.2351/1.5060159

Abstract

View Articletitled, Drift of electrons and impurity atoms by induced laser radiation in semiconductor crystals

PDF

Cutting of CVD diamond by optical fibre guided Nd:YAG laser

M. Boutinguiza; F. Quintero; M. Belmonte; A. J. S. Fernandes; F. M. Costa; R. F. Silva; J. Pou; M. Pérez-Amor

LIACP 2018; P525https://doi.org/10.2351/1.5060164

Abstract

View Articletitled, Cutting of CVD diamond by optical fibre guided Nd:YAG laser

PDF

Single-pass and multi-pass laser cutting of silicon-silicon carbide (Si-SiC)

F. Quintero; N. Louzán; J. Pou; F. Lusquiños; M. Boutinguiza; R. Soto; M. Pérez-Amor

LIACP 2018; P526https://doi.org/10.2351/1.5060165

Abstract

View Articletitled, Single-pass and multi-pass laser cutting of silicon-silicon carbide (Si-SiC)

PDF

Modification of magnetic und structure properties of thin films by laser radiation

Ostendorf; J. Bunte; H. Becker; R. Zacharov; M. Krupa; Y. Skyrta

LIACP 2018; P534https://doi.org/10.2351/1.5060170

Abstract

View Articletitled, Modification of magnetic und structure properties of thin films by laser radiation

PDF

Section B - Laser Sources for Microfabrication

Drilling of wafer bump stencils with laser microjet^®: Up to 40’000 holes per hour

Ochélio Sibailly; Christophe Boillat; Rafal Romanowicz; Bernold Richerzhagen

LIACP 2018; M602https://doi.org/10.2351/1.5060135

Abstract

View Articletitled, Drilling of wafer bump stencils with laser microjet®: Up to 40’000 holes per hour

PDF

Effect of laser parameters on semiconductor micromachining using diode-pumped solid-state lasers

Mingwei Li; Kevin Hartke

LIACP 2018; M604https://doi.org/10.2351/1.5060136

Abstract

View Articletitled, Effect of laser parameters on semiconductor micromachining using diode-pumped solid-state lasers

PDF

198-nm cw laser source for lithographic applications

Edward C. Rea, Jr.; Andrea Caprara; Colin Seaton; Yefim Kil

LIACP 2018; M608https://doi.org/10.2351/1.5060137

Abstract

View Articletitled, 198-nm cw laser source for lithographic applications

PDF

Towards the realization of a laser adaptive control

M. M. S. Gualini

LIACP 2018; M609https://doi.org/10.2351/1.5060138

Abstract

View Articletitled, Towards the realization of a laser adaptive control

PDF

Progress in developing an ultra short wavelength solid state laser

M. M. S. Gualini

LIACP 2018; P508https://doi.org/10.2351/1.5060150

Abstract

View Articletitled, Progress in developing an ultra short wavelength solid state laser

PDF

Analysis on conversion efficiency and beam profile of second harmonic generated by KTP

Etsuji Ohmura; Kazufumi Nomura; Isamu Miyamoto

LIACP 2018; P520https://doi.org/10.2351/1.5060161

Abstract

View Articletitled, Analysis on conversion efficiency and beam profile of second harmonic generated by KTP

PDF

Laser processing with a water droplet lens

Hirofumi Hidai; Hitoshi Tokura

LIACP 2018; P543https://doi.org/10.2351/1.5060174

Abstract

View Articletitled, Laser processing with a water droplet lens

PDF

All Years