A novel compact-sized polymeric multimode power splitter was designed and fabricated, with its overall length 30% shorter than conventional Y-junction splitter in the case of 1×8 splitters. By using soft-lithography the polymeric power splitters were prototyped and measurement was in a good agreement with the calculated result. The device features unique advantages of low-cost fabrication and possible mass-production.

1.
John A.
Jay
,
Corning Optical Fiber. An Overview of International Fiber to the Home Deployment
,
Fiber-to-the-home Conference
, October,
2002
2.
Rajiv
Ramaswami
,
Kumar N.
Sivarajan
.
Optical Networks: A Practical Perspective
, Second Edition,
Morgan Kaufmann Publishers
,
2001
3.
Younan
Xia
,
George M.
Whitesides
.
Soft Lithography
,
Annu. Rev. Mater. Sci.
,
1998
,
28
, p
153
184
4.
Yanyi
Huang
,
George T.
Paloczi
,
Jacob
Scheuer
,
Amnon
Yariv
.
Softlithography replication of polymeric microring opticalresonator
,
Optics Express
,
2003
, vol.
11
, No.
20
, p
2452
2457
5.
Yasuhiro
Hida
,
Yasuyuki
Inoue
,
Fumiaki
Hanawa
,
Takao
Fukumistu
,
Yoshitaka
Enomoto
,
Silica-Based 1 ×32 Splitter Integrated with 32 WDM Couplers Using Multilayers Dielectric Filters for Fiber Line Testing at 1.65µm
,
IEEE Photonics Technology Letters
,
1999
, vol.
11
, No.
1
, p
96
98
6.
Shanying
Lu
,
Xihua
Li
,
Xiaoqing
Jiang
,
Minghua
Wang
,
Compact design of 1×16 cascaded Y-branch splitter
,
Chinese Optics Letters
, Vol.
2
, No.
8
, August 10,
2004
, p
459
461
7.
Hiroshi
Sasaki
,
Iain
Anderson
,
Theoretical and Experimental Studies on Active Y-Junctions in Optical Waveguides
,
IEEE Journal of Quantum Electronics
, Vol.
QE-14
, No.
11
, November
1978
, p
883
892
8.
Chin Lung
Chen
,
Fuhua
Jen
,
Fabrication of Polymer Splitter by Micro Hot Embossing Technique
,
Tamkang Journal of Science and Engineering
, Vol.
7
, No.
1
,
2004
, p
5
9
9.
R.
Scarmozzino
,
A.
Gopinath
,
R.
Pregla
, et al,
Numerical techniques for modeling guided-wave photonics devices
,
IEEE Journal of Selective Topics on Quantum Electronics
, Vol.
6
, No.
1
,
2000
, p
150
162
This content is only available via PDF.
You do not currently have access to this content.