A review of the technique and potential applications of the fusion laser cutting assisted by an off-axis supersonic nozzle to extract the molten material is presented. Applications on cutting of materials difficult to cut via conventional laser cutting (e.g. ceramics) or materials used in applications where the finishing is a key factor, finishing impossible to obtain via conventional laser cutting (e.g. aluminum alloys for aerospace applications) are reviewed.
REFERENCES
1.
2.
Ready
J.F.
, Farson
D.F.
, (2001
) LIA Handbook of laser materials processing
, Laser Institute of America
.3.
Olsen
F.
, (2006
) An evaluation of the cutting potential of different high power lasers
, in Proceedings of ICALEO’06
, Arizona, USA
, 188
–196
.4.
Quintero
F.
, Pou
J.
, Lusquiños
F.
, Boutinguiza
M.
, Soto
R.
, Pérez-Amor
M.
(2003
) Comparative study of the influence of the gas injection system on the Nd:yttrium-aluminum-garnet laser cutting of advanced oxide ceramics
, Review of Scientific Instruments
74
(9
), 4199
–4205
.5.
Quintero
F.
, Pou
J.
, Lusquiños
F.
, Boutinguiza
M.
, Soto
R.
, Pérez-Amor
M.
, Wagner
F.
(2004
) Comprehensive assessment of the CO2 laser cut quality of ceramics with different assist gas injection systems
, Journal of Laser Applications
16
(4
), 212
–220
.6.
Riveiro
A.
, Pou
J.
, Lusquiños
F.
, Boutinguiza
M.
, Quintero
F.
, Soto
R.
, Comesaña
R.
, Pérez-Amor
M.
(2006
) Laser cutting of 2024-T3 aeronautic aluminium alloy
, in Proceedings of ICALEO’06
, Arizona, USA
, 225
–232
.7.
8.
Ilavarsan
P.M.
, Molian
P.A.
(1993
) Design, fabrication and testing of an off-axial gas jet nozzle for enhanced laser cutting
, Proceedings of ICALEO’93
, Orlando, USA
, 350
–360
.9.
Masuda
W.
, Nakamura
T.
(1993
) Effects of nozzle contour on the aerodynamic characteristics of underexpanded annular impinging jets
, JSME International Journal, Series B: Fluids and Thermal Engineering
36
(2
), 238
–244
.10.
Man
H.C.
, Duan
J.
, Yue
T.M.
(1997
) Design and characteristic analysis of supersonic nozzles for high pressure laser cutting
, Journal of Material Processing Technology
63
, 217
–222
.11.
Quintero
F.
, Pou
J.
, Lusquiños
F.
, Boutinguiza
, M.
, Soto
R.
, Pérez-Amor
M.
(2004
) Quantitative evaluation of the quality of the cuts performed on mullite-alumina by Nd:YAG laser
, Optics and Lasers in Engineering
42
(3
), 327
–340
.12.
Vicanek
M.
, Simon
G.
(1987
) Momentum and heat transfer of an inert gas jet to the melt in laser cutting
, Journal of Physics D: Applied Physics
20
, 1191
–1196
.13.
14.
Duan
J.
, Man
H.C.
, Yue
T.M.
(1999
) Analysis of the dynamic characteristics of gas flow inside a laser cut kerf under high cut-assist gas pressure
, Journal of Physics D: Applied Physics
32
, 1469
–1477
.15.
Brandt
A. D.
; Settles
G. S.
(1997
) Effect of nozzle orientation on the gas dynamics of inert gas laser cutting of mild steel
, Journal of Laser Applications
9
(6
), 269
–277
.16.
Quintero
F.
, Pou
J.
, Fernandez
J.L.
, Doval
A.F.
, Lusquiños
F.
, Boutinguiza
M.
, Soto
R.
, Pérez-Amor
M.
(2006
) Optimization of an off-axis nozzle for assist gas injection in laser fusion cutting
, Optics and Laser in Engineering
44
(11
), 1158
–1171
.17.
Riveiro
A.
, Gómez
B.
, Quintero
F.
, Lusquiños
F.
, Comesaña
R.
, Pou
J.
(2007
) Cutting of aeronautic aluminium alloys by a novel supersonic laser cutting head
, in Proceedings of the 4th International WLT Conference on Lasers in Manufacturing
, Munich, Germany
, 523
–526
.18.
Riveiro
A.
, Gómez
B.
, Quintero
F.
, Lusquiños
F.
, Comesaña
R.
, Pou
J.
(2007
) An outlook into the laser cutting of aeronautic aluminium alloys
, in Proceedings of 11th NOLAMP Conference
, Lappeenranta, Finland
, 101
–109
This content is only available via PDF.
© 2008 Laser Institute of America.
2008
Laser Institute of America
You do not currently have access to this content.