This paper describes an initial investigation of hybrid laser welding in conjunction with enhanced control short-circuiting techniques in Gas Metal Arc Welding (GMAW). A high power diode laser has been used together with controlled dip transfer, to improve deposition rate while achieving deep penetration, high welding speed and high quality butt welds in thin plain carbon steel sheet. The effect of the laser energy on the inherent control of the GMAW system is discussed and the results are compared with conventional enhanced controlled dip transfer GMAW.
REFERENCES
1.
Boughton.
P.
, MacGregor.
G.
Control of Short Circuiting in MIG-Welding, The Welding Institute
, Research Report P57/72
, TWI.
, UK
. July 1972
2.
Norrish.
J.
, Dean.
G.
, Cuiuri.
D.
, Cook.
C.
, A New Approach to Controlled Short Circuit Transfer in GMAW, Recent Developments and Future Trends in Welding Technology
, Cranfield University
, UK
, September 2001.3.
Cuiuri
, D.
, Norrish
, J.
, Cook
, C.
, Droplet Size Regulation in the Short Circuit GMAW Process using a Current Controlled Waveform
. Proc. Conf. Gas Metal Arc Welding for the 21st Century
, Orlando, Florida
, December 2000.4.
Smith
, A. A.
1966
. Features of short-circuiting CO2 Arc Welding with a duplex power source
, British Welding Journal
April 1966: Pp 215
–223
5.
Boughton
, P.
; and MacGregor
, G. J.
1974
. Control of Short Circuiting in MIG-Welding
, Welding Research International
4
(2
): Pp 31
–53
6.
7.
Ogasawara
, T.
; Maruyama
, T.
; Saito
, T.
; Sato
, M.
; and Hida
, Y.
; 1987
. A power source for gas shielded arc welding with new current waveforms
. Welding Journal
March 1987 Pp 57
–63
8.
Ogasawara
, T.
; Maruyama
, T.
; Saito
, T.
; Sato
, M.
; and Hida
, Y.
; Output control of short circuit welding power source
. U.S. Patent 45462349.
Stava
, E. K.
1995
. Low spatter welding
. Australian Welding Journal
, Fourth quarter 1995 Pp 21
–24
10.
Kiyohara
, M.
; Okada
, T.
; and Yamamoto
, H.
1973
. On the stability of metal transfer in short circuit arc welding and the new control systems
. IIW Document 212-276-73
11.
Dilthey
, U.
, Lueder
, F.
& Wieschemann
, A.
1999
. Expanded capabilities in welding of Aluminium alloys with laser-MIG Hybrid process
, Aluminium
, 75
, 1999(1/2)12.
13.
Dawes
, C.
, 1992
, Laser welding. A pratical guide
, Abington Publishing
. Cambridge
, 199214.
Handbook of chemistry and Physics
, 64th edition 1983-1984
, CRC Press
15.
16.
Suematsu
, Y.
and Adams
, A.R.
1992
. Semiconductor lasers and photonic integrated circuits. Ohmsha, Ltd
199217.
Kennedy
, E.
, Byrne
, G.
2003
. The integration of high power diode laser into a conventional machine centre
. Proceeding of the 20th International Manufacturing Conference
. 3rd to 5th September 200318.
Hook
, S.
& Gick
, A.
, 1973
, Penetration welding with lasers
. Welding journal.
Vol. 52
No 11
Pp 492s
–99s
. Nov. 197319.
Crafer
, R. C.
, 1976
. Welding with the 2kw CO2 laser
. Welding Institute Research Bulletin
Vol. 17
No 2
Pp 29
–33
20.
Lancaster
, J.F.
1990
. Metallurgy of welding, 3rd Ed. George Allen & Unwin Ltd
, London
21.
Dilthey
, U.
, Lueder
, F.
, and Wiesshemann
, A.
1998
. Process-Technical investigations on hybrid technology laser beam-arc welding
, Proceed. Of the 6th int. conference on Welding and Melting by Electron and laser beams
, Toulon, Framce
, 15-19 June 1998
, Pp 417
–424
22.
Radaj
, D.
1992
. Heat Effects of Welding. Springer-Verlag Berlin Heidelberg
New York
199223.
Dean
, G.
, Norrish
, J.
, Cook
, C.
2005
. Evaluation of Control Techniques used in Dip transfer GMAW
. Australian welding Journal
Vol. 50
Third quarter, 2005 Pp 34
–41
This content is only available via PDF.
© 2006 Laser Institute of America.
2006
Laser Institute of America
You do not currently have access to this content.