Skip Nav Destination
Biomimetic design and laser additive manufacturing—A perfect symbiosis?
A bibliometric analysis for the research on laser processing based on Web of Science
X-ray radiation protection aspects during ultrashort laser processing
Issues
Letters
Biomimetic design and laser additive manufacturing—A perfect symbiosis?
J. Laser Appl. 32, 021201 (2020)
https://doi.org/10.2351/1.5131642
Technical Articles
A bibliometric analysis for the research on laser processing based on Web of Science
In Special Collection:
Laser Hybrid Manufacturing
J. Laser Appl. 32, 022001 (2020)
https://doi.org/10.2351/1.5097739
Position sensing of ultrashort pulsed laser-welded seams in glass by optical coherence tomography
J. Laser Appl. 32, 022003 (2020)
https://doi.org/10.2351/1.5133467
X-ray radiation protection aspects during ultrashort laser processing

In Special Collection:
Ultrafast Laser Technology 2019
J. Laser Appl. 32, 022004 (2020)
https://doi.org/10.2351/1.5134778
Effect of fiber laser welding on solute segregation and proprieties of CoCrCuFeNi high entropy alloy
J. Laser Appl. 32, 022005 (2020)
https://doi.org/10.2351/1.5128535
Inverse estimation of heat input in laser surface hardening with a dual-phase-lag model
J. Laser Appl. 32, 022006 (2020)
https://doi.org/10.2351/1.5128698
Multipulse laser ablation of BiSn eutectic: Noncongruent element transfer and morphology analysis
J. Laser Appl. 32, 022008 (2020)
https://doi.org/10.2351/1.5118902
Correlation between plume fluctuation and keyhole dynamics during fiber laser keyhole welding
J. Laser Appl. 32, 022010 (2020)
https://doi.org/10.2351/1.5138219
Online optical inspection of air permeability of packaging materials during laser perforation
J. Laser Appl. 32, 022011 (2020)
https://doi.org/10.2351/1.5144534
Atomic simulation of irradiation of Cu film using femtosecond laser with different pulse durations
J. Laser Appl. 32, 022016 (2020)
https://doi.org/10.2351/1.5144512
Anticipating heat accumulation in laser oxygen cutting of thick metal plates
J. Laser Appl. 32, 022018 (2020)
https://doi.org/10.2351/7.0000052
Impact of the thermally induced focus shift on the quality of a laser cutting edge
J. Laser Appl. 32, 022022 (2020)
https://doi.org/10.2351/7.0000053
Spattering effects during selective laser melting
J. Laser Appl. 32, 022023 (2020)
https://doi.org/10.2351/7.0000061
Short pulse laser welding of aluminum and copper alloys in dissimilar configuration
J. Laser Appl. 32, 022025 (2020)
https://doi.org/10.2351/7.0000073
Laser power modulation to grain refinement of SAE 1045 steel welds
J. Laser Appl. 32, 022027 (2020)
https://doi.org/10.2351/7.0000096
Tribological comparison of Inconel 625 coatings deposited via laser metal deposition and tungsten inert gas welding process
Rafael Gomes Nunes Silva; Adriano de Souza Pinto Pereira; Jurandir Marcos Sá de Sousa; Milton Pereira; Régis Henrique Gonçalves e Silva
J. Laser Appl. 32, 022034 (2020)
https://doi.org/10.2351/7.0000090
Monitoring method of weld penetration in laser keyhole welding irradiated by laser auxiliary illuminant
J. Laser Appl. 32, 022037 (2020)
https://doi.org/10.2351/7.0000104
Laser welding components for electric vehicles with a high-power blue laser system
J. Laser Appl. 32, 022038 (2020)
https://doi.org/10.2351/7.0000054
Laser processing of dielectrics using spatiotemporally tuned ultrashort pulses
J. Laser Appl. 32, 022041 (2020)
https://doi.org/10.2351/7.0000081
Experimental research of picosecond laser based edge preparation of cutting tools
J. Laser Appl. 32, 022043 (2020)
https://doi.org/10.2351/7.0000066
Absorption and temperature distribution during ultrafast laser microcutting of polymeric materials
J. Laser Appl. 32, 022044 (2020)
https://doi.org/10.2351/7.0000080
Dissimilar laser cladding of Inconel 718 powder on A-286 substrate: Microstructural evolution
J. Laser Appl. 32, 022048 (2020)
https://doi.org/10.2351/1.5124932
Observation of single ultrashort laser pulse generated periodic surface structures on linelike defects
J. Laser Appl. 32, 022049 (2020)
https://doi.org/10.2351/7.0000075
Microstructures from wire-fed laser welding of high strength steel grades
Alexander F. H. Kaplan; Matthias Höfemann; Eva Vaamonde; Anandkumar Ramasamy; Bert Kalfsbeek; Jonas Näsström; Stephanie M. Robertson; Jan Frostevarg; Jörg Volpp
J. Laser Appl. 32, 022050 (2020)
https://doi.org/10.2351/7.0000087
Comparison of SLOT and μ-CT investigation of 3D printed polymer parts for quality assurance
J. Laser Appl. 32, 022051 (2020)
https://doi.org/10.2351/7.0000084
Defect detection in additive manufacturing via a toolpath overlaid melt-pool-temperature tomography
J. Laser Appl. 32, 022055 (2020)
https://doi.org/10.2351/7.0000055
Porosity and joint property of laser-MIG hybrid welding joints for 304 stainless steel
In Special Collection:
Laser Hybrid Manufacturing
J. Laser Appl. 32, 022056 (2020)
https://doi.org/10.2351/1.5139676
Layer-wise control of selective laser melting by means of inline melt pool area measurements
J. Laser Appl. 32, 022057 (2020)
https://doi.org/10.2351/7.0000108
Selective laser melting of Inconel 625 alloy with reduced defect formation
J. Laser Appl. 32, 022058 (2020)
https://doi.org/10.2351/7.0000093
Influence of laser beam profile on the selective laser melting process of AlSi10Mg
J. Laser Appl. 32, 022059 (2020)
https://doi.org/10.2351/7.0000100
Surface functionalization by laser-induced periodic surface structures
J. Laser Appl. 32, 022063 (2020)
https://doi.org/10.2351/7.0000103
Numerical investigation of pore defect formation in the weld during high speed laser welding
J. Laser Appl. 32, 022066 (2020)
https://doi.org/10.2351/7.0000109
Micro- and nanofabrication using Bessel-beam activated photopolymerization
J. Laser Appl. 32, 022067 (2020)
https://doi.org/10.2351/7.0000079
Investigation on the melt ejection and burr formation during laser fusion cutting of stainless steel
J. Laser Appl. 32, 022068 (2020)
https://doi.org/10.2351/7.0000074
Parametrization methodology for laser remelting applied over laser metal deposition single tracks
J. Laser Appl. 32, 022069 (2020)
https://doi.org/10.2351/7.0000098
Possibilities for organizing feedback on the Doppler backscattering signal in surgical СО2 lasers
J. Laser Appl. 32, 022073 (2020)
https://doi.org/10.2351/7.0000015
Novel local shielding approach for the laser welding based additive manufacturing of large structural space components from titanium
N. Kolsch; A. Seidel; T. Finaske; F. Brueckner; J. Gumpinger; M. Bavdaz; T. Rohr; T. Ghidini; C. Leyens
J. Laser Appl. 32, 022075 (2020)
https://doi.org/10.2351/7.0000114
Development of all-fiber coherent beam combining optical system toward higher output of the fiber laser
J. Laser Appl. 32, 022077 (2020)
https://doi.org/10.2351/7.0000058
Errata
Laser powder bed fusion of a nanocrystalline Finemet Fe-based alloy for soft magnetic applications
S. Sadanand, M. Rodríguez-Sánchez, et al.
Velocity-based closed-loop control in fusion laser cutting for multi-directional and curved geometries
Sofia Guerra, Luca Vazzola, et al.
Fundamentals of simultaneous machining and coating (SMaC) through combination of extreme high-speed laser material deposition (EHLA) and turning
Viktor Glushych, Niklas Dall, et al.