With the advancement of glass technology in recent times, glass has become one of the most important engineering materials in architectural, medical, automotive, flat panel display, and electronics applications. Desired shape and size of the glass can only be achieved through accurate and precise cutting technique. Laser technology has an advantage over traditional cutting processes for glass due to good quality, surface finish, and high speed of operation. This paper provides a review of all the laser glass cutting techniques discovered in recent work and forms a comparison framework, in particular, their limitations and their current status which would facilitate prospective research and future development.

1.
V. I.
Kondrashov
,
L. A.
Shitova
,
V. A.
Litvinov
, and
V. V.
Surkov
, “
Characteristics of cutting parameters and their effect on the glass edge quality
,”
Glass Ceram.
58
(9-10),
303
305
(
2001
).
2.
C. T.
Pan
,
C. C.
Hsieh
,
C. Y.
Su
, and
Z. S.
Liu
, “
Study of cutting quality for TFT-LCD glass substrate
,”
Int. J. Adv. Manuf. Technol.
39
,
1071
1079
(
2008
).
3.
M.
Zhou
,
B. K. A.
Ngoi
,
M. N.
Yusoff
, and
X. J.
Wang
, “
Tool wear and surface finish in diamond cutting of optical glass
,”
J. Mater. Process. Technol.
174
,
29
33
(
2006
).
4.
E. S.
Prakash
,
K.
Sadashivappa
,
V.
Joseph
, and
M.
Singaperumal
, “
Nonconventional cutting of plate glass using hot air jet: Experimental studies
,”
Mechatronics
11
,
595
615
(
2001
).
5.
I.
Black
,
K. L.
Chua
, and
S. A.
Livingstone
,
Experimental development of a machining database for the CO2 laser cutting of ceramic tile
,”
J. Laser Appl.
9
,
233
241
(
1997
).
6.
C.
Hermanns
, “
Laser cutting of glass
,”
Proc. SPIE
4102
,
219
226
(
2000
).
7.
H. S.
Kang
,
S. K.
Hong
,
S. C.
Oh
,
J. Y.
Choi
, and
M. G.
Song
, “
A study of cutting glass by laser
,”
Proc. SPIE
4426
,
367
370
(
2002
).
8.
A. B.
Zhimalov
,
V. F.
Solinov
,
V. S.
Kondratenko
, and
T. V.
Kaplina
, “
Laser cutting of float glass during production
,”
Sci. Glass Prod.
63
,
319
321
(
2006
).
9.
S.
Muralidhar
,
S.
Pal
,
A.
Jagota
,
S. R.
Kale
, and
R. K.
Mittal
, “
A study of thermal cutting of glass
,”
J. Am. Ceram. Soc.
82
,
2166
2176
(
1999
).
10.
A. R.
Shahani
and
M.
Seyyedian
, “
Simulation of glass cutting with an impinging hot air jet
,”
Int. J. Solids Struct.
41
,
1313
1329
(
2004
).
11.
F.
Yuan
,
J. A.
Johnson
,
D. D.
Allred
, and
R. H.
Todd
, “
Waterjet cutting of cross-linked glass
,”
J. Vac. Sci. Technol. A
13
,
136
139
(
1995
).
12.
J. S.
Luna
,
R.
Machorro
,
J.
Camacho
,
E.
Luna
, and
J.
Nunez
, “
Waterjet: A promising method for cutting optical glass
,”
Appl. Opt.
45
,
3477
3481
(
2006
).
13.
A. A.
Khan
and
M. M.
Haque
, “
Performance of different abrasive materials during abrasive waterjet machining of glass
,”
J. Mater. Process. Technol.
191
,
404
407
(
2007
).
14.
B.
Richerzhagen
, “
Device for machining material with a laser
,” International patent WO 95/32834 (
1995
).
15.
B.
Richerzhagen
,
M.
Kutsuna
,
H.
Okada
, and
T.
Ikeda
, “
Waterjet-guided laser processing
,”
Proc. SPIE
4830
,
91
94
(
2003
).
16.
B.
Richerzhagen
, “
The best of both worlds—Laser and waterjet combined in a new process: The waterjet guided laser
,” in
Proceedings of 20th International Congress on Application of Laser and Electro-Optics, ICALEO
(Laser Institute of America, Orlando, FL, 2001), pp.
1815
1824
.
17.
B.
Richerzhagen
, “
Chip singulation process with a waterjet guided laser
,” retrieved 05/02/2007, from http://wwwsolid-statecom/display_article/97279/5/none/none/EuroT/Chip-singulation-process-with-a-water-jet-guided-laser,
2001
.
18.
M.
Udrea
, “
Small power pulsed and continuous longitudinal CO2 Laser for material processing
,”
Proc. SPIE
4068
,
657
662
(
2000
).
19.
D. J.
Garibotti
, “
Dicing of micro-semiconductors
,” U.S. patent 3,112,850 (3 December
1963
).
20.
R. M.
Lumley
, “
Controlled separation of brittle materials using a laser
,”
Am. Ceram. Soc. Bull.
48
,
850
854
(
1969
).
21.
T.
Ueda
,
K.
Yamada
,
K.
Oiso
, and
A.
Hosokawa
, “
Thermal stress cleaving of brittle materials by laser beam
,”
Ann. CIRP
51
,
149
152
(
2002
).
22.
C. H.
Tsai
and
B. C.
Lin
, “
Laser cutting with controlled fracture and pre-bending applied to LCD glass separation
,”
Int. J. Adv. Manuf. Technol.
32
,
1155
1162
(
2007
).
23.
C. H.
Tsai
and
C. J.
Chen
, “
Application of Iterative path revision technique for laser cutting with controlled fracture
,”
Opt. Lasers Eng.
41
,
189
204
(
2004
).
24.
C. H.
Tsai
and
C. S.
Liou
, “
Applying an on-line crack detection technique for laser cutting by controlled fracture
,”
Int. J. Adv. Manuf. Technol.
18
,
724
730
(
2001
).
25.
C. H.
Tsai
and
C. S.
Liou
, “
Fracture mechanism of laser cutting with controlled fracture
,”
ASME J. Manuf. Sci. Eng.
125
,
519
528
(
2003
).
26.
D. K.
Patel
and
J. D.
Baker
, “
Method for laser scribing substrates
,” U.S. patent 5,116,641 (26 May
1992
).
27.
K. S.
Wills
,
P. A.
Rodriguez
, and
M.
Brewer
, “
Wafer scribe technique using laser by forming polysilicon
,” U.S. patent 5,543,365 (6 August 1996).
28.
P. P.
Pashinin
,
S. F.
Rastopov
, and
A. T.
Sukhodol'skii
, “
Laser processing and cutting of transparent materials
,”
Sov. J. Quantum Mech.
17
,
547
(
1987
).
29.
K.
Du
and
P.
Shi
, “
Subsurface precision machining of glass substrates by innovative lasers
,”
Glass Sci. Technol.
76
,
95
98
(
2003
).
30.
F.
Ahmed
,
M. S.
Lee
,
H.
Sekita
,
T.
Sumiyoshi
, and
M.
Kamata
, “
Display glass cutting by femtosecond laser induced single shot periodic void array
,”
Appl. Phys. A
93
,
189
192
(
2008
).
31.
M. M.
Ikeda
, “
Study on laser breaking of glass plate. I. Generation and Growth of vertical cracks by scribing
,”
J. Jpn. Soc. Precis. Eng.
62
,
413
417
(
1996
).
32.
M. M.
Ikeda
, “
Study on laser breaking of glass plates (2nd report). The optimum CO2 Laser beam irradiating condition
,”
J. Jpn. Soc. Precis. Eng.
66
,
213
217
(
2000
).
33.
C.
Hermanns
, “
Laser separation of flat glass in electronic-, optic-, display- and bio-industry
,”
Proc. SPIE
5713
,
387
396
(
2005
).
34.
B.
Hoekstra
, “
Advanced glass separation (laser cutting)
,” in
Proceedings of the Display Works 99 Manufacturing Technology Conference
(Soc. Inf. Display (SID), San Jose, CA, USA,
1999
), pp.
37
41
.
35.
B.
Hoekstra
and
R.
Flannigan
, and D. Wegerif, “
Laser enhanced processing methods for FPD manufacturing
,” in
Proceedings of the 21st International Congress on Applications of Lasers and Electro-Optics, ICALEO
(Laser Institute of America, Scottsdale, AZ, USA,
2002
), pp.
2595
2602
.
36.
J.
Jiao
and
X.
Wang
, “
Cutting glass substrates with dual-laser beams
,”
Opt. Lasers Eng.
47
,
860
864
(
2009
).
37.
T. L.
Anderson
,
Fracture Mechanics: Fundamentals and Applications
(
CRC Press. Taylor and Francis Group
,
FL
,
2005
), Chap. 1.
38.
F. J.
Grove
,
D. C.
Wright
, and
F. M.
Hamer
, “
Cutting of glass with a laser beam
,” U.S. patent 3,543,979 (1 December 1970).
39.
G. K.
Chui
, “
Laser cutting of hot glass
,”
Am. Ceram. Soc. Bull.
54
,
514
518
(
1975
).
40.
I.
Black
, “
Laser cutting of decorative glass ceramic tile
,”
Am. Ceram. Soc. Bull.
77
,
53
57
(
1998
).
41.
F.
Guignard
,
M.
Autric
, and
V.
Baudinaud
, “
Temperature and residual stress evolution in CO2 Laser irradiated glass
,”
Proc. SPIE
3343
,
534
545
(
1998
).
42.
J. N.
Dekker
and
M. H.
Zonneveld
, “
Thermal severing. The cutting of brittle materials by thermally induced fracture
,” in
Advances in Fracture Research Proc 7th International Conference on Fracture
(Pergamon, Houston, TX, USA,
1989
), pp.
2825
2834
.
43.
C. H.
Tsai
and
B. C.
Lin
, “
Laser cutting of silica glasses by using the controlled fracture technique
,” in
Proceedings of the 23rd International Congress on Applications of Lasers and Electro-Optics, ICALEO
(Laser Institute of America, San Francisco, CA, USA,
2004
), pp.
34
41
.
44.
C. H.
Tsai
and
B. W.
Huang
, “
Diamond scribing and laser breaking for LCD glass substrates
,”
J. Mater. Process. Technol.
198
,
350
358
(
2008
).
45.
C. H.
Tsai
and
W. H.
Chang
, “
Pulsed laser breaking technique for glass substrates
,”
Proc. SPIE
7204
,
72040A
A
(
2009
).
46.
R.
Akarapu
and
A. E.
Segall
, “
Investigation of an active stressing technique for delaying fracture during laser cutting of alumina
,” in
International Mechanical Engineering Congress and Exposition, IMECE 2004
(ASME, Anaheim, California,
2004
), Vol.
15
, pp.
173
179
.
47.
S.
Georgi
, “
Separating and structuring of brittle material by the use of laser radiation
,”
Proc. SPIE
5063
,
426
431
(
2003
).
48.
J.
Lin
and
Y. Z.
Wang
, “
Characterisation of the laser cleaving on glass sheets with a line-shaped laser beam
,”
Opt. Laser Technol.
39
,
892
899
(
2006
).
49.
H. K.
Tönshoff
,
A.
Ostendorf
,
C.
Kulik
,
H.
Hesener
, and
O.
Haupt
, “
Final glass products in one processing step by the means of laser radiation
,” in
Proceedings of the 22nd International Congress on Applications of Lasers and Electro-Optics, ICALEO
(Laser Institute of America, Jacksonville, FL, USA,
2003
), pp.
71
80
.
50.
V. S.
Kondratenko
, “
Method of splitting non-metallic materials
,” U.S. patent 5,609,284 (11 March 1997).
51.
H.
Ostendarp
,
C.
Hermans
,
D.
Hauer
, and
J.
Stein
, “
Method and apparatus for cutting through a flat workpiece made of brittle material, especially glass
,” U.S. patent 5,984,159 (16 November 1999).
52.
C.
Hermanns
, “
Laser cutting of thin glass in production technology
,” in
Display Manufacturing Technology Conference Digest of Technical Papers
(1999), pp.
33
36
.
53.
U.
Unger
and
W.
Wittenbecher
, “
The cutting edge of laser technology
,”
Glass
75
,
101
102
(
1998
).
54.
A. D.
Nurse
,
N.
Paterson
,
A.
Tawn
, and
K.
Williams
, “
On the numerical modeling of laser shearing of glass sheets used to optimize production methods
,”
Proc. Inst. Mech. Eng., Part C
218
,
1
11
(
2004
).
55.
K.
Yamamoto
,
N.
Hasaka
,
H.
Morita
, and
E.
Ohmura
, “
Thermal stress analysis on laser scribing of glass
,” in
Proceedings of 23rd International Congress on Applications of Lasers and Electro-Optics, ICALEO
(Laser Institute of America, San Francisco, California,
2004
).
56.
K.
Yamamoto
,
N.
Hasaka
,
H.
Morita
, and
E.
Ohmura
, “
Thermal stress analysis on laser scribing of glass
,”
J. Laser Appl.
20
,
193
200
(
2008
).
57.
S.
Nisar
,
M. A.
Sheikh
,
L.
Li
, and
S.
Safdar
, “
Effect of thermal stresses on chip-free diode laser cutting of glass
,”
Opt. Laser Technol.
41
,
318
327
(
2009
).
58.
S.
Nisar
,
M. A.
Sheikh
,
L.
Li
,
A. J.
Pinkerton
, and
S.
Safdar
, “
The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass
,”
ASME J. Manuf. Sci. Eng.
132
,
11002
11010
(
2010
).
59.
S.
Nisar
,
M. A.
Sheikh
,
L.
Li
,
A. J.
Pinkerton
, and
S.
Safdar
, “
The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass
,”
Int. J. Adv. Manuf. Technol.
49
,
167
175
(
2010
).
60.
S.
Nisar
,
M. A.
Sheikh
,
L.
Li
,
A. J.
Pinkerton
, and
S.
Safdar
, “
The effect of material thickness, laser power and cutting speed on cut path deviation in high-power diode laser chip-free cutting of glass
,”
Opt. Laser Technol.
42
,
1022
1031
(
2010
).
61.
J.
Jiao
,
X.
Wang
,
X.
Zhang
,
W.
Tang
,
F.
Liu
, and
Y.
Lu
, “
Numerical analysis of cutting glass by dual CO2 laser beams
,”
Proc. SPIE
6825
,
1
8
(
2007
).
62.
J.
Jiao
and
X.
Wang
, “
A Numerical simulation of machining glass by dual CO2-laser beams
,”
Opt. Laser Technol.
40
,
297
301
(
2008
).
63.
J.
Lin
and
Y. L.
Kuo
, “
Laser cleaving on glass sheets with multiple laser beams
,”
Opt. Lasers Eng.
46
(5),
388
395
(
2008
).
64.
F.
Kahlen
,
D.
Wegerif
,
B.
Hoekstra
, and
A.
Kar
, “
Laser glass machining for crack initiation and edge seaming in flat panel display manufacturing
,” in
Proceedings of 20th International Congress on Applications of Lasers and Electro-Optics, ICALEO
(Laser Institute of America, Orlando, FL,
2001
).
65.
R.
Joeckle
and
A.
Sontag
, “
The deep penetration of hf laser light into glass and its possible industrial use
,” in
Proceedings of the 6th International Symposium on Gas Flow and Chemical Lasers
(Springer, Jerusalem,
1987
), pp.
374
378
.
66.
M. B.
Strigin
and
A. N.
Chudinov
, “
Laser processing of glass by picosecond pulses
,”
Quantum Electron.
24
,
732
735
(
1994
).
67.
M. B.
Strigin
and
A. N.
Chudinov
, “
Cutting of glass by picosecond laser radiation
,”
Opt. Commun.
106
,
223
226
(
1994
).
68.
S.
Nolte
,
M.
Will
,
M.
Augustin
,
P.
Triebel
,
K.
Zollner
, and
A.
Tunnermann
, “
Cutting of optical materials by using femtosecond laser pulses
,”
Proc. SPIE
4440
,
152
160
(
2001
).
69.
E.
Vanagas
,
J.
Kawai
,
D.
Tuzhilin
,
I.
Kudryashov
,
A.
Mizuyama
, and
K.
Nakamura
, “
Glass cutting by femtosecond pulsed irradiation
,”
J. Microlithogr., Microfabr., Microsyst.
3
,
358
363
(
2004
).
70.
V. L.
Kantsyrev
,
O. V.
Komardin
,
V. F.
Solinov
, and
M. Y.
Yakovlev
, “
New methods of cleaving glass by ultraviolet laser radiation
,”
Tech. Phys. Lett.
20
,
469
470
(
1994
).
71.
D.
Ashkensai
, “
Laser processing of optical material: Drilling, dicing and modifying thin glass
,” in
Proceedings of the 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO
(LIA, ,Miami, FL,
2005
), pp.
1
9
.
You do not currently have access to this content.