The use of laser diode pointers that operate in the visible radiation region (400–760 nm) is becoming widespread. These pointers are intended for use by educators while presenting talks in the classroom or at conventions and meetings. They are also useful in any situation where one needs to point out special items during any instructive situation. The pointers can be purchased in novelty stores, mail-order magazines, office supply stores, common electronic stores, and over the internet. The power emitted by these laser pointers ranges from 1 to 5 mW. The potential for hazard with laser pointers is generally considered to be limited to the unprotected eyes of individuals who might be exposed by a direct beam (intrabeam viewing). No skin hazard usually exists. There are, however, even more powerful laser pointers now appearing. The units are imported into the U.S. often without proper manufacturer certification or labeling. The potential for hazards with these devices is not well understood by the general public and workers, and numerous exposure incidents have been recorded by the authors. Users of these products need to be alerted to the potential hazards and be encouraged to follow appropriate safety recommendations. These factors are discussed and safety recommendations for laser pointers are presented.
Skip Nav Destination
Article navigation
August 1998
Research Article|
August 01 1998
Safety recommendations for laser pointers
R. James Rockwell, Jr.;
R. James Rockwell, Jr.
Rockwell Laser Industries, 7754 Camargo Road, Cincinnati, Ohio 45243
Search for other works by this author on:
William J. Ertle;
William J. Ertle
Rockwell Laser Industries, 7754 Camargo Road, Cincinnati, Ohio 45243
Search for other works by this author on:
C. Eugene Moss
C. Eugene Moss
National Institutes of Occupational Safety and Health, Cincinnati, Ohio 45226
Search for other works by this author on:
J. Laser Appl. 10, 174–180 (1998)
Article history
Received:
May 14 1998
Accepted:
May 18 1998
Citation
R. James Rockwell, William J. Ertle, C. Eugene Moss; Safety recommendations for laser pointers. J. Laser Appl. 1 August 1998; 10 (4): 174–180. https://doi.org/10.2351/1.521848
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
Smart-Alloying for tailored microstructures in laser-based metal additive manufacturing
Anastasiya Toenjes, Carolin Zinn, et al.
Laser powder bed fusion of pure copper using ring-shaped beam profiles
Alexander Bauch, Philipp Kohlwes, et al.
Tailored microstructure in laser-based powder bed fusion of IN718 through novel beam shaping technology
Narges Mirzabeigi, Peter Holfelder-Schwalme, et al.
Related Content
Green Diode Laser Pointers Have Now Dropped in Cost to About $10
The Physics Teacher (October 2009)
Random testing reveals excessive power in commercial laser pointers
J. Laser Appl. (April 2013)
Safety concerns about laser pointers
Journal of Laser Applications (August 2012)
Extreme output power emitted by commercial laser pointers in Greece: A solely local or a global issue?
J. Laser Appl. (May 2022)
Optics experiments using a laser pointer
The Physics Teacher (October 1999)