The effects of annealing and diode laser scribing were investigated on amorphous iron-base alloy ribbons to further reduce their core losses. A maximum core loss reduction of 6% was achieved in the as-cast samples and 32% in the annealed ones. The decrease in core loss is attributed to the reduction in residual stresses and domain refinement.
REFERENCES
1.
Downloaded from “
AlliedSignal
” Home page.2.
K. S.
Tan
, “Amorphous ribbon domain refinement by scribing
,” IEEE Transactions on Magnetics
, vol. Mag-22
, No. 3
, May 1986
, pp. 188
–191
.3.
L. A.
Lowdermilk
and A. C.
Lee
, “Five years of operating experiance with amorphous transformers
”, pp. 131
–136
.4.
“
High tech core alloy slashes no-load loss
,” Electrical World
, September 1985
.5.
T.
Sato
and T.
Yamada
, “Improvement of core loss by chemical thinning in a thick amorphous alloy ribbon
,” IEEE Transactions on Magnetics
, vol. 28
, No. 5
, September 1992
, pp. 2775
–2777
6.
N.
Derebasi
, T.
Meyden
and G.
Derebasi
, “Influence of scratching on domain structure and power loss in amorphous ribbons
,” IEEE Transactions on Magnetics
, vol. 30
, No. 6
, November 1994
, pp. 4821
–4823
.7.
8.
V. R.
Ramanan
, D. C.
Jiles
and M. J.
Johnson
, “A general procedure for monitoring core-loss improvements in laser scribed metallic-glass ribbons
,” Proceedings of the NSF Design and Manufacturing Grantees Conference
, 1998
, pp. 509
–510
.9.
V. R. V.
Ramanan
, “Metallic Glasses in Distribution transformer Applications: An Update
,” Journal of Materials Engineering
, vol. 13
, No 2
, 1991
, pp. 119
–127
.10.
T.
Sato
, T.
Yamada
and T.
Ozawa
, “Effect of laser irradiation on the 50 Hz thick amorphous alloy ribbon
,” Rapidly Quenched Metals
, 1985
, pp. 1643
–1646
.11.
T.
Sato
, “Further improvement of core loss in amorphous alloys
,” Journal of Materials Engineering and performance
, vol. 2
, April 1993
, pp. 235
–239
.
This content is only available via PDF.
© 1998 Laser Institute of America.
1998
Laser Institute of America
You do not currently have access to this content.