Molecular dynamics simulation showed that by using abrasive grain with positive rake angle, the surface/subsurface damage and grinding force in the process of hard and brittle materials machining will be reduced significantly. In view of this, ablating single crystal diamond (SCD) plate by femtosecond laser to create a novel face grinding tool with acute inclination angle at the edge of the micro grains was proposed in this paper. A Ti: Sapphire femtosecond laser with wavelength of 1030nm and pulse width of 250fs was used for the ablation experiments. The effects of processing parameters on the ablation depth, ablation width and surface quality of diamond were investigated systematically. Under the current.
REFERENCES
1.
Kitajima
, K.
, Cai
, G. Q.
, Kurnagai
, N.
, Tanaka
, Y.
, & Zheng
, H. W.
(1992
). Study on mechanism of ceramics grinding
. CIRP Annals - Manufacturing Technology
, 41
(1
), 367
–371
.2.
Dai
, H.
, Chen
, G.
, Fang
, Q.
, & Yin
, J.
(2016
). The effect of tool geometry on subsurface damage and material removal in nanometric cutting single-crystal silicon by a molecular dynamics simulation
. Applied Physics A
, 122
(9
), 804
.3.
Everson
, C.
, & Molian
, P.
(2009
). Fabrication of polycrystalline diamond microtool using a Q-switched Nd:YAG laser
. International Journal of Advanced Manufacturing Technology
, 45
(5-6
), 521
–530
.4.
Guo
, B.
, Zhao
, Q.
, & Yu
, X.
(2014
). Surface micro-structuring of coarse-grained diamond wheels by nanosecond pulsed laser for improving grinding performance
. International Journal of Precision Engineering & Manufacturing
, 15
(10
), 2025
–2030
.5.
Mazur
, E.
, Gandhi
, H. H.
, Phillips
, K. C.
, & Sundaram
, S. K.
(2015
). Ultrafast laser processing of materials: a review
. Advances in Optics & Photonics
, 7
(4
), 684
.6.
Shirk
, M. D.
, Molian
, P. A.
, & Malshe
, A. P.
(1998
). Ultrashort pulsed laser ablation of diamond
. Journal of Laser Applications
, 10
(10
), 64
–70
.7.
Okuchi
, T.
, Ohfuji
, H.
, Odake
, S.
, Kagi
, H.
, Nagatomo
, S.
, & Sugata
, M.
, et al (2009
). Micromachining and surface processing of the super- hard nano-polycrystalline diamond by three types of pulsed lasers
. Applied Physics A
, 96
(4
), 833
–842
.8.
Ohfuji
, H.
, Okuchi
, T.
, Odake
, S.
, Kagi
, H.
, Sumiya
, H.
, & Irifune
, T.
(2010
). Micro-/nanostructural investigation of laser-cut surfaces of single- and polycrystalline diamonds
. Diamond & Related Materials
, 19
(7–9
), 1040
–1051
.9.
Eberle
, G.
, Dold
, C.
, & Wegener
, K.
(2015
). Laser fabrication of diamond micro-cutting tool-related geometries using a high-numerical aperture micro-scanning system
. International Journal of Advanced Manufacturing Technology
, 81
(5-8
), 1117
–1125
.10.
Eberle
, G.
, Jefimovs
, K.
, & Wegener
, K.
(2015
). Characterisation of thermal influences after laser processing polycrystalline diamond composites using long to ultrashort pulse durations
. Precision Engineering
, 39
, 16
–24
.11.
Joswig
, A.
, Risse
, S.
, Eberhardt
, R.
, & Tünnermann
, A.
(2010
). Laser generated and structured prototypes of diamond tool tips for microoptics fabrication. in
Proceedings of 25th Annual Meeting of the American Society for Precision Engineering
, Atlanta, USA
, 53
–56
.12.
Su
, S.
, Li
, J.
, Lee
, G. C. B.
, Sugden
, K.
, Webb
, D.
, & Ye
, H.
(2013
). Femtosecond laser-induced microstructures on diamond for microfluidic sensing device applications
. Applied Physics Letters
, 102
(23
), 374017
.13.
Ogawa
, Y.
, Ota
, M.
, Nakamoto
, K.
, Fukaya
, T.
, Russell
, M.
, & Zohdi
, T. I.
, et al (2016
). A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools
. CIRP Annals - Manufacturing Technology
, 65
(1
), 245
–248
.14.
Calvani
, P.
, Bellucci
, A.
, Girolami
, M.
, Orlando
, S.
, Valentini
, V.
, & Lettino
, A.
, et al (2014
). Optical properties of femtosecond laser-treated diamond
. Applied Physics A
, 117
(1
), 25
–29
.15.
Terekhov
, A.
, Parrish
, M.
, Zalloum
, O. H. Y.
, & Hofmeister
, W.
(2010
). On femtosecond micro-machining of HPHT single-crystal diamond with direct laser writing using tight focusing
. Optics Express
, 18
(12
), 13122
–13135
.16.
Shinoda
, M.
, Gattass
, R. R.
, & Mazur
, E.
(2009
). Femtosecond laser-induced formation of nanometer-width grooves on synthetic single-crystal diamond surfaces
. Journal of Applied Physics
, 105
(5
), 053102
-053102-4
.17.
Wang
, F.
, Shan
, C.
, Yan
, J. P.
, Fu
, J.
, Abdisa
, D. G.
, & Zhu
, T. F.
, et al (2016
). Application of femtosecond laser technique in single crystal diamond film separation
. Diamond & Related Materials
, 63
, 69
–74
.18.
Kim
, J.
, Je
, T. J.
, Cho
, S. H.
, Jeon
, E. C.
, & Whang
, K. H.
(2014
). Micro-cutting with diamond tool micro-patterned by femtosecond laser
. International Journal of Precision Engineering & Manufacturing
, 15
(6
), 1081
–1085
.19.
Konov
V I.
Laser in micro and nanoprocessing of diamond materials[J]
. Laser & Photonics Reviews
, 2012
, 6
(6
):739
–766
.20.
Rehman
, Z. U.
, & Janulewicz
, K. A.
(2016
). Structural transformation of monocrystalline diamond driven by ultrashort laser pulses
. Diamond & Related Materials
, 70
, 194
–200
.21.
Hsu
, E. M.
, Mailman
, N. A.
, Botton
, G. A.
, & Haugen
, H. K.
(2011
). Microscopic investigation of single-crystal diamond following ultrafast laser irradiation
. Applied Physics A
, 103
(1
), 185
–192
.22.
Huang
, M.
, Zhao
, F.
, Cheng
, Y.
, Xu
, N.
, & Xu
, Z.
(2009
). Mechanisms of ultrafast laser-induced deep-subwavelength gratings on graphite and diamond
. Phys.rev.b
, 79
(79
), 125436
.23.
Wu
, M.
, Guo
, B.
, Zhao
, Q.
, Dong
, Z.
, & Yu
, X.
(2018
). The influence of the focus position on laser machining and laser micro-structuring monocrystalline diamond surface
. Optics & Lasers in Engineering
, 105
, 60
–67
.
This content is only available via PDF.
© 2018 Laser Institute of America.
2018
Laser Institute of America
You do not currently have access to this content.