We compared the results of femtosecond laser peening obtained at different condition (in air without coating, in water and in air with coating) and by different overlap ratio. Austenic stainless steel was used as the test sample. The Vickers microhardness was used to probe the work hardening and a 3D profilometer was used to evaluate the surface roughness. The great increase in hardness was obtained for the sample in air and by using an overlap of 50%.

1.
Sano
,
T.
, et al (
2017
)
Femtosecond laser peening of 2024 aluminum alloy without a sacrificial overlay under atmospheric conditions
,
Journal of Laser Applications
,
29
(
1
)
012005
.
2.
Ge
,
M.Z.
and
Xiang
J.Y.
(
2016
)
Effect of laser shock peening on microstructure and fatigue crack growth rate of AZ31B magnesium alloy
,
Journal of Alloys and Compounds
,
680
,
544
552
.
3.
Majumdar
,
J.D.
, et al (
2016
)
Investigation on femto-second laser irradiation assisted shock peening of medium carbon (0.4% C) steel
,
Applied Surface Science
,
364
,
133
140
.
4.
Tsuyama
,
M.
, et al (
2016
)
Effects of Laser Peening Parameters on Plastic Deformation in Stainless Steel
,
Journal of Laser Micro Nanoengineering
,
11
(
2
),
227
.
5.
Nakano
,
H.
, et al (
2010
)
Femtosecond and nanosecond laser peening of stainless steel
,
Journal of Laser Micro/Nanoengineering
,
5
(
2
),
175
178
.
6.
Nakano
,
H.
, et al (
2009
)
Femtosecond laser peening of stainless steel
,
Journal of Laser Micro/Nanoengineering
,
4
(
1
),
35
38
.
7.
Gujba
,
A.K.
and
Medraj
,
M.
(
2014
)
Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening
,
Materials
,
7
(
12
),
7925
7974
.
8.
Fan
,
Y.
, et al (
2005
)
Wave-solid interactions in laser-shock-induced deformation processes
,
Journal of Applied Physics
,
98
(
10
),
104904
.
9.
O’keefe
,
J.
,
Skeen
,
C.
, and
York
,
C.
(
1973
)
Laser-induced deformation modes in thin metal targets
,
Journal of Applied Physics
,
44
(
10
),
4622
4626
.
10.
Peyre
,
P.
and
Fabbro
,
R.
(
1995
)
Laser shock processing: a review of the physics and applications
,
Optical and Quantum Electronics
,
27
(
12
),
1213
1229
.
11.
Montross
,
C.
,
Florea
,
V.
, and
Swain
,
M.
(
2001
)
The influence of coatings on subsurface mechanical properties of laser peened 2011-T3 aluminum
,
Journal of materials science
,
36
(
7
),
1801
1807
.
12.
Nguyen
,
T.T.P.
,
Tanabe
,
R.
, and
Ito
,
Y.
(
2013
)
Influences of focusing conditions on dynamics of laser ablation at a solid–liquid interface
,
Applied Physics Express
,
6
(
12
),
122701
.
13.
Nguyen
,
T.
,
Tanabe
,
R.
, and
Ito
,
Y.
(
2013
)
Laser-induced shock process in under-liquid regime studied by time-resolved photoelasticity imaging technique
,
Applied Physics Letters
,
102
(
12
),
124103
.
14.
Le Harzic
,
R.
, et al (
2002
)
Comparison of heat-affected zones due to nanosecond and femtosecond laser pulses using transmission electronic microscopy
,
Applied Physics Letters
,
80
(
21
),
3886
3888
.
This content is only available via PDF.
You do not currently have access to this content.