This study presents the joining of steel (DP600) and PA66GF (Polyamide 6.6 reinforced with glass fibers) with a 6 kW Nd:YAG Laser.

The phenomena at the interface between the two materials are fundamental elements of analysis in the behavior of the assembly. To understand the impact of process parameters, an experimental plan with different powers and joining speeds is presented. For a better understanding, a specific thermal measurement with micro-thermocouples (wire diameter: 50 µm) is added in the middle of the thermal affected area. The mechanisms leading to a good adhesion are identified, and will allow us to optimize the joining process and increase the understanding. Shear tensile tests are presented to characterize the strength of the assembly. The presented method is compared with bonded assembly as reference.

Topics
Thermoelectricity, Lasers, Composite materials, Polymers
1.
Balle
,
F.
,
Wagner
,
G.
, &
Eifler
,
D.
 (
2009
).
Ultrasonic metal welding of aluminium sheets to carbon fibre reinforced thermoplastic composites
.
Advanced Engineering Materials
,
11
(
1–2
),
35
–
39
.
https://doi.org/10.1002/adem.200800271
Google Scholar
Crossref
Search ADS
 
2.
Mitschang
,
P.
, &
Velthuis
,
R.
 (
2008
).
Process Parameters for Induction Welding of Metal/Composite Joints
.
Technical Report. Institut Für Verbundw-Erkstoffe GmbH Kaiserslautern.
Google Scholar
 
3.
Amancio-Filho
,
S. T.
,
Bueno
,
C.
,
Dos Santos
,
J. F.
,
Huber
,
N.
, &
Hage
,
E.
 (
2011
).
On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures
.
Materials Science and Engineering: A
,
528
(
10
),
3841
–
3848
.
https://doi.org/10.1016/j.msea.2011.01.085
Google Scholar
Crossref
Search ADS
 
4.
Ageorges
,
C.
, &
Lin
,
Y.
 (
2001
).
Resistance Welding of Metal/Thermoplastic Composite Joints
.
Journal of Thermoplastic Composite Materials
, Vol
14
.
https://doi.org/10.1106/PN74-QXKH-7XBE-XKF5
Google Scholar
 
5.
Kelly
,
G.
 (
2005
).
Load transfer in hybrid (bonded/bolted) composite single-lap joints
.
Composite Structures
,
69
(
1
),
35
–
43
.
https://doi.org/10.1016/j.compstruct.2004.04.016
Google Scholar
Crossref
Search ADS
 
6.
Katayama
,
S.
, &
Kawahito
,
Y.
 (
2008
).
Laser direct joining of metal and plastic
.
Scripta Materialia
,
59
(
12
),
1247
–
1250
.
https://doi.org/10.1016/j.scriptamat.2008.08.026
Google Scholar
Crossref
Search ADS
 
7.
Huang
,
C.
,
Wang
,
X.
,
Wu
,
Y. W.
,
Meng
,
D. D.
, &
Liu
,
H. X.
 (
2014
).
Experimental Study of Laser Direct Joining of Metal and Carbon Fiber Reinforced Nylon
. In
Key Engineering Materials
(Vol.
620
, pp.
42
–
48
).
https://doi.org/10.4028/www.scientific.net/KEM.620.42
Google Scholar
Crossref
Search ADS
 
8.
Lamberti
,
C.
,
Solchenbach
,
T.
,
Plapper
,
P.
, &
Possart
,
W.
 (
2014
).
Laser Assisted Joining of Hybrid Polyamide-aluminum Structures
.
Physics Procedia
,
56
,
845
–
853
.
https://doi.org/10.1016/j.phpro.2014.08.103
Google Scholar
Crossref
Search ADS
 
9.
Rodríguez-Vidal
,
E.
,
Sanz
,
C.
,
Soriano
,
C.
,
Leunda
,
J.
, &
Verhaeghe
,
G.
 (
2016
).
Effect of metal micro-structuring on the mechanical behavior of polymer–metal laser T-joints
.
Journal of Materials Processing Technology
,
229
,
668
–
677
.
https://doi.org/10.1016/j.jmatprotec.2015.10.026
Google Scholar
Crossref
Search ADS
 
This content is only available via PDF.
© 2017 Laser Institute of America.
2017
Laser Institute of America
You do not currently have access to this content.