If the powder bed laser melting process is now widely used, the fusion process is not clearly understood yet. Particularly, it is important, formation of spatters and melt pool stability has not been analyzed.

From previous works, thermo convective effects have evidenced but should be more investigated. In this article, we present new experiments to tackle these issues. First, we present the experimental setup.

A high speed camera can register videos from different point of view around the laser spot and melt pool. Different process parameters can be changed: laser power, speed, gas type, material, granulometry…

The fusion of the powder is registered along the track. Video analyses evidence the way the powder is fusion depending of the process paramters. They allow exhibiting the stabilization effect of a reduction of the granulometry and the decrease of speed travel. The spatters formation is discussed with the observation of a gas type or a lower power change..

1.
Rapid prototyping primer,
William
Palm
 (May
1998
), revised 30 July
2002
,
Penn State Learning Factory
2.
Y.
Tang
,
H.T.
Loh
,
Y.S.
Wong
,
J.Y.H.
Fuh
,
L.
Lu
,
X.
Wang
, (
2003
),
Direct Laser sintering of a copper-based alloy for creating three-dimensional metal parts
,
Journal of Material Processing Technology
,
140
, pp
368
–
372
https://doi.org/10.1016/S0924-0136(03)00766-0
Google Scholar
 
3.
C.
Over
,
W.
Meiners
,
K.
Wissenbach
,,
J.
Hutfless
,
M.
Lindemann
, (
2003
),
Rapid Manufacturing of metal parts and tools using Laser Melting
,
Proceedings of the 2nd International WLT-Conference on Lasers in Manufacturing
2
, pp
265
–
269
4.
W.
Meiners
, (
1999
),
Direktes Selektives Laser Sintern einkomponentiger metallischer Werkstoffe, ILT
,
Google Scholar
 
5.
W.
Löschau
,
St.
Nowotny
,
K.-P.
Wieters
,
B.
Kieback
, (
1996
),
Liquid-Phase Sintering of Composite Powders by Using a Laser for Rapid Prototyping of Refractory Metallic Parts
,
International Conference on Rapid Product Development (RPD), 10.06.-11.06.96
,
Stuttgart, Tagungsband
, pp
165
–
174
6.
A.
Techel
,
S.
Nowotny
,
A.
Nagy
,
R.
Lenk
, (
2003
),
Laser Sintering of Complex-Shaped Ceramic Prototypes
,
22nd International Congress on Applications of Lasers & Electro-Optics
,
ICALEO
2003
Google Scholar
 
7.
V.
Fux
,
St.
Nowotny
,
W.
Reitzenstein
, (
1996
),
Structure and mechanical properties of laser generated metallic prototypes
,
International Conference on Rapid Product Development (RPD
),
Stuttgart
8.
S.
Das
,
J.J.
Beaman
,
M.
Wohlert
,
D.L.
Bourell
, (
1998
),
Direct Laser freeform fabrication of high performance components
,
Rapid Prototyping, Journal
,
4
(
3
) pp
112
–
117
https://doi.org/10.1108/13552549810222939
Google Scholar
 
9.
J.
Hans
,
L.
Gideon
,
S.
Ralf
, (
2003
),
New trends and applications in rapid prototyping technologies
,
Proc of IE&EM’2003
,
Shangai, China
11.
EOS
, Trumpf develops in cooperation with EOS a system for Direct metal laser-melting,
EOS Press
12.
P.
Aubry
,
C.
Colin
,
J.
Maisonneuve
,
PROFIL Project : Direct Manufacturing of Aerospace Components by Laser Cladding and Laser Sintering
,
Proceedings of ICALEO2007
,Paper #
1175
13.
N.
Coulon
,
P.
Aubry
, (
2004
),
Result on laser sintering system for direct manufacturing of metallic or ceramic components
,
Proceedings of the 23rd Conference International Congress on Applications of Lasers & Electro-Optics
,
ICALEO
2004
Google Scholar
 
14.
N.
Coulon
,
P.
Aubry
,
P.
Teulet
, (
2005
),
New trends in laser sintering : analysis of the process and new applications, paper #601
,
Proceedings of the 24th International Congress on Applications of Lasers & Electro-Optics
,
ICALEO
2005
Google Scholar
 
15.
N.
Coulon
,
Y.
Lafaye
,
P.
Aubry
Analysis of the Laser Sintering Process for Direct Manufacturing of Mould
,
Proceeding of ICALEO2006
, Paper #
1803
, pp
888
–
897
16.
P.
Aubry
,
C.
Salvetti
,
Analysis of Process Parameters on Melt Pool Stability in Powder Bed, Paper #P131
,
Proceeding of ICALEO2012, Anaheim
;
CA, USA
, Oct
2012
This content is only available via PDF.
© 2013 Laser Institute of America.
2013
Laser Institute of America
You do not currently have access to this content.