Regrettably, graffiti are a frequent aggression to historic buildings. Particularly, Moreliás historic centre (Mexico) (appointed World Heritage Site by UNESCO) suffers, for some years, a high number of graffiti. A local igneous rock called Pink Morelia Quarry is the building stone in most of this architectural heritage. The cleaning methods conventionally employed to remove these graffiti lead to serious damaging to the appearance of these monuments. In this paper, we present the results of a study on the feasibility to remove the graffiti from this natural stone using a high power diode laser treatment. An extensive experimental analysis of the operating conditions has been carried out leading to successful results. The optimal parameters to achieve a total removal of graffiti without side effects in the stone have been determined. We concluded that continuous wave regime leads to better results than modulated wave regime. Finally, a two laser passes process demonstrated a high performance improvement with regard to any combination of parameters in the single pass process.
Skip Nav Destination
ICALEO 2012: 31st International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing
September 23–27, 2012
Anaheim, California, USA
ISBN:
978-0-912035-96-3
PROCEEDINGS PAPER
Laser cleaning of graffiti from building Stone using high power diode laser
J. Penide;
J. Penide
1
Dpto. Física Aplicada, Universidade de Vigo
, E.I. Industriales, Campus Lagoas-Marcosende, 36310, Vigo, Spain
Search for other works by this author on:
F. Quintero;
F. Quintero
1
Dpto. Física Aplicada, Universidade de Vigo
, E.I. Industriales, Campus Lagoas-Marcosende, 36310, Vigo, Spain
Search for other works by this author on:
A. Riveiro;
A. Riveiro
2
Centro Universitario de la Defensa, Escuela Naval Militar
, Plaza de España 2, 36920 Marín, Spain
Search for other works by this author on:
A. Sánchez-Castillo;
A. Sánchez-Castillo
3
Facultad de Ingeniería Mecánica, Universidad Michoacana de San Nicolás de Hidalgo
, Av. Fco. J. Mújica, 58066 Morelia, Mexico
Search for other works by this author on:
R. Comesaña;
R. Comesaña
1
Dpto. Física Aplicada, Universidade de Vigo
, E.I. Industriales, Campus Lagoas-Marcosende, 36310, Vigo, Spain
Search for other works by this author on:
J. del Val;
J. del Val
1
Dpto. Física Aplicada, Universidade de Vigo
, E.I. Industriales, Campus Lagoas-Marcosende, 36310, Vigo, Spain
Search for other works by this author on:
F. Lusquiños;
F. Lusquiños
1
Dpto. Física Aplicada, Universidade de Vigo
, E.I. Industriales, Campus Lagoas-Marcosende, 36310, Vigo, Spain
Search for other works by this author on:
J. Pou
J. Pou
1
Dpto. Física Aplicada, Universidade de Vigo
, E.I. Industriales, Campus Lagoas-Marcosende, 36310, Vigo, Spain
Search for other works by this author on:
Published Online:
September 01 2012
Citation
J. Penide, F. Quintero, A. Riveiro, A. Sánchez-Castillo, R. Comesaña, J. del Val, F. Lusquiños, J. Pou; September 23–27, 2012. "Laser cleaning of graffiti from building Stone using high power diode laser." Proceedings of the ICALEO 2012: 31st International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. ICALEO 2012: 31st International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Anaheim, California, USA. (pp. pp. 596-601). ASME. https://doi.org/10.2351/1.5062513
Download citation file:
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.