A study on laser cutting of textiles Available to Purchase

The laser cutting technology is a non conventional method that has been widely used in many industries nowadays. Even though there are many materials successfully cut by laser and the technique has been commercially manipulated, but there are very few studies have been conducted on the ability of laser to cut various types of textiles. This study is focusing on the best machining conditions and the effectiveness of CO₂ laser in the process of cutting various types of textiles. Through this study, two main experiments have been conducted using CO₂ laser to perform cutting process on a single and multiple layers of textiles. The textiles used in this study are plain cotton, chiffon, habutae silk, plain jessy and plain dull satin. Two main variable machining parameters have been chosen, the laser power (100W - 500W) and the cutting speed (60 mm/s - 600 mm/s). The effect of varying the variable parameters have been investigated through the findings of the kerf width, side line length (SLL), circular diameter, percentage of overcut, depth of cut and the material removal rate (MRR). Through the analysis using tables and graphs, the usage of high laser power and slow cutting speed would result in low accuracy cutting. The results of Experiment A shows that cutting a single layer of textile using laser power of 100 W and cutting speed of 600 mm/s would produce the best cutting quality and accuracy but through the results of Experiment B, it can be seen that cutting multiple layers of textile would require higher laser power and moderate cutting speed to avoid non-through cutting. The findings in this study could help in the understanding of the behavior of textile subjected to laser cutting process. This study may offer to the textile industry the possibility of using lasers as an alternative cutting method to be used in future.