The wear characteristics of a glaze generated on the ordinary Portland cement (OPC) surface of concrete using a 2 kW high power diode laser (HPDL) and a 3 kW CO2 laser have been determined. Within both normal and corrosive environmental conditions, the wear rate of the CO2 and HPDL generated glazes were consistently higher than the untreated OPC surface of concrete. Life assessment testing revealed that surface glazing of the OPC with both the CO2 and the HPDL effected an increase in wear life of 1.3 to 17.7 times over an untreated OPC surface, depending upon the corrosive environment. The wear life and the wear rate of the HPDL glaze were found to be consistently higher than that of the CO2 laser glaze.
REFERENCES
1.
K.
Sugita
, M.
Mori
, T.
Fujioka
, Concrete Eng.
24
1986
13
–22
.2.
M.
Hamasaki
, Proc. Int. Symp. Laser Processing
, San Jose, CA., USA
, 1987
, Vol. 852
, pp. 158
–167
.3.
4.
L.
Li
, P.J.
Modern
, W.M.
Steen
, Proc. LAMP ’92
, Nagaoka, Japan
, 1992
, pp. 843
–848
.5.
L.
Li
, W.M.
Steen
, P.J.
Modern
, Proc. ISLOE ’93
, Singapore
, 1994
, pp 25
–30
.6.
L.
Li
, W.M.
Steen
, P.J.
Modern
, et al, Proc. RECOD ’94
, London, UK
, 1994
, pp 24
–28
.7.
L.
Li
, W.M.
Steen
, P.J.
Modern
, et al, Proc. EUROPTO ’94, Frankfurt, Germany
, 1994
, pp 84
–95
.8.
K.
Sugimoto
, S.
Wignarajah
, K.
Nagasi
, et al, Proc. ICALEO ’90
, Boston, MA., USA
, 1990
, Vol. 71
, pp 302
–312
.9.
S.
Wignarajah
, K.
Sugimoto
, K.
Nagai
, Proc. ICALEO ‘92
, Orlando, FL., USA
, Vol. 75
, pp. 383
–393
.10.
T.I.
Borodina
, G.E.
Valyano
, N.I.
Ibragimov
, et al, J. Phys. and Chem. of Mater. Treatment
25
1995
541
–546
.11.
J.
Lawrence
, L.
Li
, Optics Laser Tech.
31
2000
583
–591
.12.
13.
J.
Lawrence
, L.
Li
, Mater. Sci. Eng. A
, 284
2000
93
–102
.14.
J.
Lawrence
, L.
Li
, Mater. Sci. Eng. A
, 287
2000
25
–29
.15.
H.
Dickson
, Glass: A Handbook for Students and Technicians
, Hutchinsons Scientific and Technical Publications
, London
, 1951
.16.
Petitbon
, L.
, Boquet
, D.
Delsart
, Surf. & Coat. Tech.
49
1991
57
–61
.17.
BS 6431: Part 19:
1984
, Ceramic Wall and Floor Tiles: Method for Determination of Chemical Resistance
. Glazed Tiles.18.
ASTM C597-91,
Standards Test Method for Compressive Strength of Chemical-Resistant Mortars, Grouts
, Monolithic Surfacings and Polymer Concretes.19.
20.
21.
R.
Sivakumer
, B.L.
Mordike
, J. Surf. Eng.
4
1988
127
–140
.22.
J.
Mazumder
, Optical Eng.
30
1991
1208
–1219
.23.
24.
M.H.
Lewis
, Glasses and Glass-Ceramics
, Chapman & Hall
, London
, 1989
.25.
Z.
Liu
, PhD Thesis, University of Liverpool
, 1991
.
This content is only available via PDF.
© 2007 Laser Institute of America.
2007
Laser Institute of America
You do not currently have access to this content.