Welding of Ti-6AL-4V with fibre delivered laser beams Available to Purchase

Titanium alloys offer higher strength to weight ratios than steels, better fatigue performance than aluminium alloys and better corrosion resistance than aluminium alloys and stainless steels, and are now increasingly used in applications in the aerospace, chemical plant, power generation, oil and gas, medical and sporting goods sectors. For aerospace applications in particular, weld quality is very important, the occurrence of porosity being of particular concern. There are many potential benefits arising from the use of lasers for welding titanium alloys, however, there is little published information which quantifies the levels of porosity formed during welding under different conditions. In addition, the qualitative information currently available would indicate it is easier to produce high quality welds in titanium alloys using CO₂ lasers, than by using one micron wavelength fibre delivered laser beams. This paper will present results using a Yb-fibre laser, for the autogenous welding of Ti-6Al-4V alloy at 3, 5 and 9.3mm thickness. The quality of the resulting welds will be discussed, particularly with respect to porosity levels obtained and the weld profiles achieved. The results are compared with respect to a stringent set of criteria typical of those used in the aerospace sector.