Diode Lasers have been used for years in low power density applications. The lack of sufficient beam quality and life time in the range of a few thousand hours limited their applicability severely. However, in the past years the intrinsic beam quality as well as the lifetime was increased significantly. Single bars with beam parameter products around BPP=20 mm*mrad have been demonstrated [4]. Lifetimes of 30.000h (90 %) @100W cw operation are available [5]. Consequently the market increasingly accepts this type of lasers and new application domains are investigated.

In this paper, existing high power diode lasers and new concepts for increasing power by incoherent superposition, wavelength multiplexing and stacking are summarized. As a result, a laser roadmap is derived. The status and perspectives of new direct diode laser applications are reviewed, especially single shot simultaneous processing.

1.
Baumann
,
M.
:
Analyse und Formung von Diodenlaserstrahlung
, Diss.
RWTH Aachen
,
Shaker, Aachen
2004
Google Scholar
 
2.
Wolff
,
D.
: Über die Qualit ät von Hoch leistungs-lasern,
Laser Technik Journal
,
WILEY-VCH
,
Wein - heim
, March
2005
3.
Mayer
,
A.
: Lasersysteme zur Materialbear-beitung,
Laser Technik Journal
,
WILEY-VCH
,
Weinheim
, March
2005
4.
Lichtenstein
,
N.
, (
2005
)
325 Watts from 1-cm wide 9xx laser bars for DPSSL and FL applications
:
Proc. SPIE
Vol.
5711
, p.
1
–
11
,
High-Power Diode
Google Scholar
Crossref
Search ADS
 
5.
M.
Behringer
,
W.
Pammer
,
K.
Friepes
,
U.
Steegmüller
,
M.
Philippens
,
H.
König
,
J.
Luft
,
G.
Herrmann
,
A.
Schmitt
, (
2005
)
Highly reliable and efficient laser bars and cost efficient packaging Proc. SPIE
Vol.
5711
, p.
12
–
20
,
High-Power Diode Laser Technology and Applications III
; Ed
Mark S.
Zediker
,
Photonic West, USA
Crossref
Search ADS
 
6.
Bonati
,
G.
;
Hennig
,
P.
;
Wolff
,
D.
;
Voelckel
,
H.
;
Gabler
,
T.
;
Krause
,
U.
;
Tünnermann
,
A.
;
Reich
,
M.
;
Limpert
,
J.
;
Werner
,
E.
;
Liem
,
A.
 (
2005
)
High-power diode laser bars as pump sources for fiber lasers and amplifiers Proceedings of the SPIE
, Volume
5709
, pp.
78
–
87
,
Laser Resonators and Beam Control VIII.
edited by
Kudryashov
,
Alexis V.
;
Paxton
,
Alan H.
7.
H.
Schlueter
,
C.
Schnitzler
 (
2005
)
High Power Diode Laser Pumps for Multi-kW Solid-State Lasers
, CLEO 2005
8.
A.
Knigge
,
G.
Erbert
,
J.
Jönsson
,
W.
Pittroff
,
R.
Staske
:
Passively cooled 940 nm laser bars with 73% wall-plug efficiency at 70W and 25°C
,
Electronic Letters
, Vol.
41
, No.
5
, March 2005
12.
K.
Paschke
,
B.
Sumpf
,
F.
Dittmar
,
G.
Ebert
 (
2005
)
Nearly-diffraction limited 980nm tapered diode lasers with an ouput power of 6.7W
13.
M.
Bartram
,
Rik W.
De Doncker
,
J.
Gottmann
,
G.
Schlaghecken
,
D. Ho
fmann
,
R.
Poprawe
;
Pulse widths less than 100 ns @ 500 A Current: Challenge to Explore New Applications with High-Power Laser Diode Arrays
;
Proceedings of the Second International WLT-Conference on Lasers in Manufacturing
2003
,
Munich, Germany
, June 2003
14.
S.
Abed
,
W.
Knapp
,
M.
Traub
,
D.
Hoffman
,
R.
Poprawe
,
P.
Loosen
:
Development of simultaneous welding process applied to thermoplastic polymers
;
Proceedings of ICALEO
(
2004
)
Crossref
Search ADS
 
15.
A.
Knitsch
,
D.
Hoffmann
,
P.
Loosen
,
R.
Poprawe
:
Adapted diode laser modules for material processing
,
Proceedings of 2nd WLT -Conference on Lasers in Manufacturing
,
Munich
, June
2003
16.
M.
Traub
,
D.
Plum
,
D.
Hoffmann
,
P.
Loosen
,
R.
Poprawe
:
Homogenized high power diode laser systems for material processing and illumination
,
Proceedings of 2nd WLT-Conference on Lasers in Manufacturing
,
Munich
, June
2003
17.
D.
Petring
:
Innovative Entwicklungen im Bereich des Laserschneiden und –schweißen
;
Aachener Kolloquium für Lasertechnik
,
2004
Google Scholar
 
This content is only available via PDF.
© 2005 Laser Institute of America.
2005
Laser Institute of America
You do not currently have access to this content.