A new concept for dual beam laser lap joining of galvanized steel sheets with zero gap at the interface is presented. This concept employs two laser beams with an angle between them. The new laser beam configuration is implemented by combining two laser focusing heads through use of a custom designed fixture. Welding trials were conducted with a robot by mounting the whole beam delivery set-up at the end of the robot arm. Excellent quality welds were obtained on a variety of zinc-coated sheet combinations. This paper focuses on the results obtained on 1.4/1.4 mm hot dipped galvanized steel sheets. The effects of various welding parameters were studied through both experimental trials as well as modeling of the keyhole geometry.
REFERENCES
1.
Hanicke
, L.
(1995
) Ten Years of Experiments with High-Power Lasers in Production
, IBEC’95
, Vol 15
. pp. 57
–65
.2.
Forrest
, M.G.
(1996
) Laser Knurling Seam Preparation for Laser Welding of Zinc Coated Sheet Metal – Process Development Preliminary Results
, Technical Digest of the 15th International Congress on Applications in Lasers and Electro Optics (ICALEO ’96
), Southfield, MI
, pp. 133
..3.
Forrest
, M. G.
and Marttila
, W. A.
(1996
) A Study of Effects of Laser Welding Process Parameters Variation on Weld Quality for Zn-Coated Thin Auto Body sheet Materials, Automotive Laser Applications Workshop (ALAW’96)
, Novi, MI
.4.
Abdel-Monew
, E.
(1997
) Study on Weldability of Zinc-Coated Steel Sheets in Lap Joint Configuration
, Steel Research
, Vol. 68
, No. 12
, pp. 546
–551
.5.
Akhter
, R.
, Steen
, W. M.
, and Cruciani
(1998
) Laser Welding of Zinc Coated Steel
, Proceedings of the 5th International Conference on Lasers in Manufacturing
, Stuttgart, Germany
, IFS Publications
, pp. 195
–206
.6.
Kielwasser
, M.
, Fabbro
, R.
, Petring
, D.
, & Poprawe
, R.
(2000
) Physical Processes During Pulsed Nd:YAG Laser and CW – CO2 Laser Welding of Zinc Coated Steel
, Proc. of Laser Applications Auto Industry – ICALEO@2000
, pp. A10
–A21
.7.
8.
Belforte
, D. A.
(2004
) Status Report: VW – Driven to Lead
, Industrial Laser Solutions
, May, pp 15
∼18
.9.
M. G.
Forrest
and F.
Lu
, “Recent Development on Laser Lap Joining Zinc Coated Steel Sheets Without Gap at the Interface
”, Proc. of XI Sheet Metal Welding Conference
, May 11 – 14, 2004
, Sterling Heights, MI
.10.
M.
Forrest
and F.
Lu
, “Fundamental Study of Dual Beam Laser Welding of Zinc Coated Steel Sheets in Lap Joint Configuration with Zero-Gap”, ICALEO 2003
, Jacksonville, Florida
.11.
Lu
, F.
, & Forrest
, M. G.
(2003
) Weldability Comparison of Different Zinc Coated High Strength Steel Sheets in Laser Lap Joining Configuration Without Gap, ICALEO
, Jacksonville, Florida
.
This content is only available via PDF.
© 2004 Laser Institute of America.
2004
Laser Institute of America
You do not currently have access to this content.