Although forming sheet metal by laser-induced thermal stresses (laser forming) has been extensively studied, the research has mainly focused on a single angle forming process. The task of free curve laser forming of sheet metal is to determine a set of process parameters such as laser scanning paths, laser power and scanning speed that will make a given shape. Two methods were used for generating the laser scanning paths and the bending angles of each path. Each method was analyzed by computer simulation and the two methods were compared. And a feedback control method with statistical models was proposed for better accuracy. Experiments verified the applicability of the proposed methods.
REFERENCES
1.
Yau
, C.L.
, Chan
, K.C.
and Lee
, W.B.
Laser Bending of Leadframe Materials
. J Mater Process Technol.
Vol.82
: 1998
; pp.117
–121
2.
Chan
, K.C.
and Liang
, J.
Laser Bending of an Al6013/Sicp Aluminum Matrix Composite Sheet
. J Mater Process Technol.
Vol.100
: 2000
; pp.214
–218
3.
Lawrence
, J
, Schmidt
, M.J.J.
and Li
, L.
The Forming of Mild Steel Plates with A 2.5kw High Power Diode Laser
. Int J Machine Tools Manuf.
Vol.41
: 2001
; pp.967
–977
4.
Magee
, J.
, Sidhu
, J.
and Cooke
, R.L.
A Prototype Laser Forming System
. Opt Laser Eng.
Vol.34
: 2000
; pp.339
–353
5.
Marya
, M.
and Edwards
, G.R.
A Study on the Laser Forming of Near-Alpha and Metastable Beta Titanium Alloy Sheets
. J Mater Process Technol.
Vol.108
: 2001
; pp.376
–383
6.
Ji
, Z.
and Wu
, S.
FEM Simulation of the Temperature Field during The Laser Forming Of Sheet Metal
. J Mater Process Technol.
Vol.74
: 1998
; pp.89
–95
7.
Kyrsanidi
, A.K.
, Kermanidis
, T.B.
and Pantelakis
, S.G.
Numerical and Experimental Investigation of the Laser Forming Process
. J Mater Process Technol.
Vol.87
: 1999
; pp.281
–290
8.
Hu
, Z.
, Labudovic
, M.
, Wang
, H.
and Kovacevic
, R.
Computer Simulation and Experimental Investigation of Sheet Metal Bending Using Laser Beam Scanning
. Int J Machine Tools Manuf.
Vol.41
: 2001
; pp.589
–607
9.
Vollersten
, F.
An Analytical Model for Laser Bending
. Lasers in Eng.
Vol.2
: 1994
; pp.261
–376
10.
Yau
, C.L.
, Chan
, K.C.
and Lee
, W.B.
A New Analytical Model for Laser Bending
. Laser Assisted Net Shape Engeering Meisenbach, Bamberg
1997
; pp. 156
–169
11.
Cheng
, P.J.
and Lin
, S.C.
An Analytical Model for the Temperature Field in the Laser Forming of Sheet Metal
. J Mater Process Technol.
Vol.101
: 2000
; pp.260
–267
12.
Kyrsanidi
, A.K.
, Kermanidis
, T.B.
and Pantelakis
, S.G.
An Analytical Model for the Prediction of Distortions Caused by the Laser Forming Process
. J Mater Process Technol.
Vol.104
: 2000
; pp.94
–102
13.
Cheng
, P.J.
and Lin
, S.C.
Using Neural Networks to Predict Bending Angle of Sheet Metal Formed by Laser
. Int J Machine Tools Manuf.
Vol.40
: 2000
; pp.1185
–1197
14.
Hennige
, T.
, Holzer
, S.
and Vollersten
, F.
, Geiger
M.
On the Working Accuracy of Laser Bending
. J Mater Process Technol.
Vol.71
: 1997
; pp.422
–432
15.
Thomson
, G.
and Pridham
, M.
A Feedback Control System for Laser Forming
. Mechatronics.
Vol.7
: 1997
; pp.429
–441
16.
Thomson
, G.
and Pridham
, M.
Improvements to Laser Forming through Process Control Refinements
. Optics & Laser Technol.
Vol.30
: 1998
; pp.141
–146
17.
Hennige
, T.
Development of Irradiation Strategies for 3D-Laser Forming
. J Mater Process Technol.
Vol.103
: 2000
; pp.102
–108
This content is only available via PDF.
© 2003 Laser Institute of America.
2003
Laser Institute of America
You do not currently have access to this content.