Proceedings Papers

PLENARY SESSION

Laser processing in the microelectronics industry

Edward J. Swenson

ICALEO 1995; 1-5https://doi.org/10.2351/1.5058910

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Lasers in electronic substrate production

Glenn Gengel; Bob Butcher

ICALEO 1995; 6-14https://doi.org/10.2351/1.5058973

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Excimer laser soldering for fine pitch surface mount assembly

K. H. Lau; H.C. Man

ICALEO 1995; 15-24https://doi.org/10.2351/1.5058901

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

IC dam bar cutting with a pulsed Nd:YAG laser

N. Miyanagi; K. Ogata; Y. Nagano; S. Okumura; Y. Shimomura; S. Sakurai

ICALEO 1995; 25-34https://doi.org/10.2351/1.5058917

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Fluxless soldering with laser for assembly of TCP

Akira Adachi; Kohei Murakami; Jitsuho Hirota; Susumu Hoshinouchi

ICALEO 1995; 35-41https://doi.org/10.2351/1.5058929

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 1: SURFACE MODIFICATION I

Laser heat treating of machine tool spindles

W. J. Whealon

ICALEO 1995; 42-50https://doi.org/10.2351/1.5058938

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Surface hardening of 300M steel for air force and industrial applications

Michael L. Lander; John O. Bagford; Charles Oblinger; Robert J. Hull; Susil K. Putatunda

ICALEO 1995; 51-59https://doi.org/10.2351/1.5058951

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Formation of non-magnetic region in ferromagnetic stainless steel by laser alloying

Shoichiro Nishitani; Masaharu Moriyasu

ICALEO 1995; 60-68https://doi.org/10.2351/1.5058961

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser surface alloying of magnesium base alloys to improve the corrosion and wear properties

R. Galun; A. Weisheit; B. L. Mordike

ICALEO 1995; 69-77https://doi.org/10.2351/1.5058972

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Thermal fatigue and oxidation resistance properties of laser alloying Co-Cr electrodeposited on medium carbon steel

Baiyun Tong; Yong Liang; Kaixuan Qu; Jun Feng; Zhongchao Feng

ICALEO 1995; 78-84https://doi.org/10.2351/1.5058984

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Microstructure and property of laser transformation hardening on sheet steel with high carbon content

Wang Kunlin; Zhu Yunming; Dong Zhijuan; Zhang Renji

ICALEO 1995; 85-90https://doi.org/10.2351/1.5058987

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Characterization of microstructure and interface of NiCrBSi superalloy coating produced by laser cladding

Yang Gao; Yong Liang; Baiyun Tong; Jianyu Huang; Changxu Shi

ICALEO 1995; 91-97https://doi.org/10.2351/1.5058988

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Low power laser heat treatment to improve fatigue life of low carbon steel

David E. Fly; J. T. Black; Ben Singleton

ICALEO 1995; 98-107https://doi.org/10.2351/1.5058989

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 2: CUTTING & MACHINING

The role of oxygen pressure in laser cutting mild steels

A. Ivarson; J. Powell; C. Magnusson

ICALEO 1995; 108-117https://doi.org/10.2351/1.5058889

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

High speed material processing of thick stainless steel with a chemical oxygen-iodine laser

J. E. Scott; W. P. Latham; A. Kar

ICALEO 1995; 118-127https://doi.org/10.2351/1.5058896

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

The influence of cutting assist gas and pressure on the laser cutting of lumber products

V.E. Merchant

ICALEO 1995; 128-137https://doi.org/10.2351/1.5058897

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Model- predictive parameter and path planning in laser cutting

Li-Hong Cai; Paul Sheng

ICALEO 1995; 138-147https://doi.org/10.2351/1.5058898

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Material removal using high power lasers and its industrial potential

H. Haferkamp; Fr.-W. Bach; F. von Alvensleben; D. Seebaum

ICALEO 1995; 148-157https://doi.org/10.2351/1.5058899

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Selective removal of steel by a laser slotting process

W. O’Neill; M. Voglsanger; A. Elboughey; W.M. Steen

ICALEO 1995; 158-167https://doi.org/10.2351/1.5058900

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Material removal and precision machining of structural ceramics using Nd:YAG lasers

S. K. Nikumb; M. U. Islam

ICALEO 1995; 168-177https://doi.org/10.2351/1.5058902

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 3: RAPID PROTOTYPING

Laser forming near shapes in titanium

F.G. Arcella; E.J. Whitney; D. Krantz

ICALEO 1995; 178-183https://doi.org/10.2351/1.5058903

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Photosolidification of 3D objects by contact irradiation of whole layers

Efrem V. Fudim

ICALEO 1995; 184-192https://doi.org/10.2351/1.5058904

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Rapid prototyping with laser cutting

William Leichter

ICALEO 1995; 193https://doi.org/10.2351/1.5058905

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Stereolithography accuracy, QuickCast^™ & rapid tooling

Paul F. Jacobs, Dr.

ICALEO 1995; 194https://doi.org/10.2351/1.5058906

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Rapid prototyping applications at Sandia National Laboratories

Clinton L. Atwood; Michael C. Maguire; Michael D. Baldwin; Brian T. Pardo

ICALEO 1995; 195https://doi.org/10.2351/1.5058907

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Physical vapor deposition of refractory oxides by laser ablation

Steve Foltyn; Martin Piltch; James T. Feeley

ICALEO 1995; 196https://doi.org/10.2351/1.5058908

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laminated injection mold die made by CO₂ laser cut steel sheets

Jae-Do Kim; Yang-Moo Cho

ICALEO 1995; 197-204https://doi.org/10.2351/1.5058909

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Stereolithography for toy prototypes with complex geometries

Zhu Yun-Ming; Sio Sei-Hoi; Yan Yong-Nian; Fong Xiao-Wen

ICALEO 1995; 205-210https://doi.org/10.2351/1.5058911

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 4: SURFACE MODIFICATION I

Laser surface cleaning of aluminum alloy

A. Kitagawa; T. Inoue; A. Komura; M. Suzuki; H. Nakajima; T. Takemoto; A. Matsunawa

ICALEO 1995; 211-220https://doi.org/10.2351/1.5058912

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Life enhancement of NASA’s space shuttle main engine-main combustion chamber liner by high energy beams

J. Singh; A. K. Kurvilla; G. Jennan; B. Bhat

ICALEO 1995; 221-230https://doi.org/10.2351/1.5058913

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser surface engineering of automotive components

Gulam Mohiuddin; Walter W. Duley; M. Nasim Uddin

ICALEO 1995; 231-240https://doi.org/10.2351/1.5058914

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser shock processing of materials. Physical processes involved and examples of applications

P. Peyre; R. Fabbro; L. Berthe; C. Dubouchet

ICALEO 1995; 241-250https://doi.org/10.2351/1.5058915

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Deposition of Mo films by ion beam assisted excimer laser PVD method

Tetsuo Yano; Toshihiko Odie; Masafumi Yoneda; Munehide Katsumura

ICALEO 1995; 251-259https://doi.org/10.2351/1.5058916

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

The temperature field numeric simulation of sheet steel hardened by laser transformation

Dong Zhi-Juan; Zhu Yun-Ming; Wang Kun-Lin; Zhang Ren-Ji

ICALEO 1995; 260-268https://doi.org/10.2351/1.5058918

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

New development of laser cladding system with larger area for industrical application

Yang Xi–Chen; Zhao Xin; Wang Yun–Shan; Wang Bao–Qi

ICALEO 1995; 269-278https://doi.org/10.2351/1.5058919

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 5: CUTTING (DRILLING)

Drilling and cutting of superalloys with Q-switched and modulated Nd:YAG laser pulses

I. Sárady; Th. Beck; G. Bostanjoglo; G. Phillipps; I. Schmidt

ICALEO 1995; 279-286https://doi.org/10.2351/1.5058920

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Effects of the temporal waveform on drilling of metals with high reflectivity and high thermal conductivity by a pulsed CO₂ laser

H. Imai; N. Hamada; K. Minamida

ICALEO 1995; 287-293https://doi.org/10.2351/1.5058921

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Enhanced aluminium processing with a high frequency, pulsed CO₂ laser

Ian A. Watson; Chris. R. Chatwin; Donny McDonald; Brian F. Scott; Hussein A. Abdullah

ICALEO 1995; 294-302https://doi.org/10.2351/1.5058922

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Blackening and its disappearance of stabilized zirconia ceramics in pulsed Nd:YAG laser drilling

Shunro Yoshioka; Toshiyuki Miyazaki; Tsuyoshi Tokunaga; Yoshihiro Tanaka

ICALEO 1995; 303-312https://doi.org/10.2351/1.5058923

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Frequency doubled Nd:YAG laser with high average power in processing of ceramics, metals and composites

Istvan Sárady; Gerd Phillipps; Stefan Seidel; Georg Bostanjoglo

ICALEO 1995; 313-320https://doi.org/10.2351/1.5058924

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Drilling of shallow angled holes in aerospace alloys using a copper laser

M. R. H. Knowles; R. Foster-Turner; A. I. Bell; A. J. Kearsley; A. P. Hoult; S. W. Lim; Hugh Bisset

ICALEO 1995; 321-330https://doi.org/10.2351/1.5058925

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

The forming process of a through hole drilled with a single laser pulse

H. Rohde; F. Dausinger

ICALEO 1995; 331-340https://doi.org/10.2351/1.5058926

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Fibre optic delivery and process sensing for precision cutting and drilling applications, with high beam quality Nd:YAG light

Duncan P. Hand; Daoning Su; Mohammed Naeem; Julian D. C. Jones

ICALEO 1995; 341-350https://doi.org/10.2351/1.5058927

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 6: MICRO-MACHINING

Applications of a modified tea CO₂ laser in electronics packaging industry

Bo Gu

ICALEO 1995; 351-360https://doi.org/10.2351/1.5058928

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Ablation threshold and etch rate measurements in high-speed ultra-violet (uv) micro-machining of polymers with uv-copper vapour lasers

Alison C. J. Glover; Elizabeth K. Llly; Michael J. Withford; James A. Piper

ICALEO 1995; 361-370https://doi.org/10.2351/1.5058930

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Development of a laser drilling process for via holes in microwave hybrid circuits using DoE and SPC methods

B. Morley

ICALEO 1995; 371-380https://doi.org/10.2351/1.5058931

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser microcontouring of diamonds

Hajime Miyazawa; Shojiro Miyake; Shuichi Watanabe; Sadao Takeuchi; Toshiyuki Miyazaki; Masao Murakawa

ICALEO 1995; 381-390https://doi.org/10.2351/1.5058932

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Process of thin Cu film removal by KrF excimer laser

Hideaki Hayashi; Isamu Miyamoto

ICALEO 1995; 391-400https://doi.org/10.2351/1.5058933

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser processing of indium tin oxide (ITO) films in manufacturing flat panel displays

Gu Bo

ICALEO 1995; 401-403https://doi.org/10.2351/1.5058934

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Process control by plume registration in laser materials processing

Johan Meijer; Frank W.A. Wisselink; Ruud R. van Kessel

ICALEO 1995; 404-411https://doi.org/10.2351/1.5058935

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser-induced unitary/composite films of titanium ceramic-metal

Zhongchao Feng; Bingcun Zhang; Wanliang Hou; Lixin Chao; Yaqing Wang; Jun Feng; Yong Liang

ICALEO 1995; 412-420https://doi.org/10.2351/1.5058936

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Technological aspects and theoretical description of copper vapour laser processing

H.W. Bergmann

ICALEO 1995; 421-430https://doi.org/10.2351/1.5058937

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 7: SURFACE MODIFICATION II

Microstructure and pitting behaviour of Al-Ti-Ni laser alloyed layers in 2014 aluminium alloy substrates

Z. Liu; C. S. Xie; K. G. Watkins; W. M. Steen; R. M. Vilar; M. G. S. Ferreira

ICALEO 1995; 431-440https://doi.org/10.2351/1.5058940

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

New bonding method of metals and ceramics using laser ablation

Toshihiko Ooie; Tetsuo Yano; Masafumi Yoneda; Munehide Katsumura

ICALEO 1995; 441-448https://doi.org/10.2351/1.5058941

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Modification of ceramic surfaces by excimer laser for adhesive bonding

H. C. Man; X. M. Zhang; T. M. Yue; W. S. Lau

ICALEO 1995; 449-458https://doi.org/10.2351/1.5058942

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Real time acoustic monitoring of excimer surface treatment of coated steels

R.E. Mueller; H. Gu; M. Olfert; W. Duley; T. North

ICALEO 1995; 459-466https://doi.org/10.2351/1.5058943

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Multi-directional laser surface cladding in any orientation

S. Carty; I. Owen; W. M. Steen; J. T. Spencer; B. D. Bastow; B. E. Quayle

ICALEO 1995; 467-476https://doi.org/10.2351/1.5058944

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Processing and characterization of laser cladded Cu-Sn-Zn coatings on cast aluminum alloys

J. Kelly; K. Nagarathnam; J. Mazumder

ICALEO 1995; 477-486https://doi.org/10.2351/1.5058945

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

High power waveguide laser arrays for surface treatment applications

A. D. Colley; K. M. Abramski; R. H. Abram; H. J. Baker; D. R. Hall

ICALEO 1995; 487-496https://doi.org/10.2351/1.5058946

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 8: WELDING & WELD MODELING

Variation of laser energy transfer efficiency with weld pool depth

Phillip W. Fuerschbach; Danny O. MacCallum

ICALEO 1995; 497-503https://doi.org/10.2351/1.5058947

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

The influence of gap width on laser welding

C. Lampa; J. Powell; A. Ivarson; H. Runnemalm; C. Magnusson

ICALEO 1995; 504-512https://doi.org/10.2351/1.5058948

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Transient effect of Ni-additive during laser induced reaction joining of metal matrix composite

Narendra B. Dahotre; T. Dwayne McCay; Mary Helen McCay

ICALEO 1995; 513https://doi.org/10.2351/1.5058949

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Effect of weld bead property on formability of laser welded joint

Yasushi Kitani; Koichi Yasuda; Kataoka Yoshihiro

ICALEO 1995; 514-523https://doi.org/10.2351/1.5058950

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Development of procedures for laser welding of carbon manganese steels using a PC-based system

J.C. Ion; L.M. Anisdahl

ICALEO 1995; 524-533https://doi.org/10.2351/1.5058952

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Effect of heat input on the positional tolerances of wire feeding during laser welding

A.S. Salminen; V.P. Kujanpää

ICALEO 1995; 534-543https://doi.org/10.2351/1.5058953

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Shape and position of keyhole during laser welding

V. V. Semak; J. C. West; J. A. Hopkins; M. H. McCay; T. D. McCay

ICALEO 1995; 544-552https://doi.org/10.2351/1.5058954

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 9: SENSING

Features of various in – Process monitoring methods and their applications to laser welding

Masao Watanabe; Hideki Okado; Takasi Inoue; Susumu Nakamura; Akira Matunawa

ICALEO 1995; 553-562https://doi.org/10.2351/1.5058955

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Integration of real time quality control systems in a welding process

Maurice Houlot; Enrique Nava-Rüdiger

ICALEO 1995; 563-572https://doi.org/10.2351/1.5058956

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Penetration depth estimation for monitoring CO₂ laser welding processes

Kishore Lankalapalli; Jay F. Tu

ICALEO 1995; 573-582https://doi.org/10.2351/1.5058957

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Observation of refractive index gradients in a laser-generated plume using laser schlieren imaging

M. Essien; D. M. Keicher; J . L. Jellison

ICALEO 1995; 583-592https://doi.org/10.2351/1.5058958

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Optical and particle properties of vapours/plasmas during material removal with laser radiation

M. Kogel-Hollacher; H. Stamm; M. Niessen; M. Alunovic; H.-G. Treusch; M. Aden; E.W. Kreutz

ICALEO 1995; 593-602https://doi.org/10.2351/1.5058959

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Quality assurance in pulsed laser welding

Jürgen Griebsch; Helmut Hüget; Friedrich Dausinger; Marius Jurca

ICALEO 1995; 603-612https://doi.org/10.2351/1.5058960

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Feasibility of a sound-based laser weld quality monitoring device

Dale U. Chang

ICALEO 1995; 613-622https://doi.org/10.2351/1.5058962

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Holographic evaluation of the displacement and material dynamics of active cast compliant array structures

Howard Fein

ICALEO 1995; 623-631https://doi.org/10.2351/1.5058963

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 10: SURFACE MODIFICATION II

Laser cladding using a high average-power Nd:YAG laser and optical fibres

M. Brandt; D. A. Scott; S. B. Emms; J. Baumer; R. I. Clarke; J. M. Yellup

ICALEO 1995; 632-639https://doi.org/10.2351/1.5058964

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Realisation and characterisation of Al-Sn alloy layers deposited on mild steel by laser cladding

J. L. Sun; Z. Liu; C. Lee; W. M. Steen; K. G. Watkins; W. P. Brown

ICALEO 1995; 640-649https://doi.org/10.2351/1.5058965

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser cladding modeling: Influence of the substrate and sprayed materials during processing at low power(<800 W)

J.-M. Jouvard; F. Lemoine; Th. Malot; D. F. Grevey; A. B. Vannes

ICALEO 1995; 650-659https://doi.org/10.2351/1.5058966

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Two powder stream diagnostics for laser deposition processes

L. Paul Schanwald

ICALEO 1995; 660-669https://doi.org/10.2351/1.5058967

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Dilution sensing during laser cladding and alloying

L. Li; W.M. Steen

ICALEO 1995; 670-679https://doi.org/10.2351/1.5058968

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Localised corrosion performance of laser surface cladded super stainless steels

R. Li; M. G. S. Ferreira; M. A. Anjos; R. Vilar; K. Watkins; W. M. Steen

ICALEO 1995; 680-688https://doi.org/10.2351/1.5058969

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Study on surface remelting of aluminum alloy castings by CO₂ laser using a rotating optical device

Muneharu Kutsuna; Yoshihiro Inami

ICALEO 1995; 689-698https://doi.org/10.2351/1.5058970

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser cladding of oxide-ceramic powder with enamel frit on a steel substrate

Wang Maocai; Yu Jiaqing; Chen Jiang; Wu Weitao

ICALEO 1995; 699-707https://doi.org/10.2351/1.5058971

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 11: SENSING

Properties of keyhole plasma in CO₂ laser welding

Takuomi Maiwa; Isamu Miyamoto; Kiyokazu Mori

ICALEO 1995; 708-717https://doi.org/10.2351/1.5058974

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Observation and interpretation of gasdynamic discontinuities induced by pulsed laser ablation and their influence on the energy coupling

P. Berger; G. Callies; H. Schittenhelm; H. Hugel

ICALEO 1995; 718https://doi.org/10.2351/1.5058975

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Spectroscopic studies on laser induced plume of aluminum alloys

Akira Matsunawa; Jong-Do Kim; Tadashi Takemoto; Seiji Katayama

ICALEO 1995; 719-728https://doi.org/10.2351/1.5058976

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Measurement of plasma plume in laser welding by IR radiation

Takayoshi Ohji; Takayuki Shiwaku; Kazuya Kirimura; Yoshinori Hirata; Yoshiyuki Matsuhiro

ICALEO 1995; 729-738https://doi.org/10.2351/1.5058977

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Weld pool oscillations in laser welding

V. V. Semak; J. A. Hopkins; M. H. McCay; T. D. McCay; J. C. West

ICALEO 1995; 739-748https://doi.org/10.2351/1.5058978

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Acoustic emission from modulated laser beam welding of materials

Hongping Gu; W. W. Duley

ICALEO 1995; 749-758https://doi.org/10.2351/1.5058979

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Development of in-process monitoring system for laser welding

Isamu Miyamoto; Kiyokazu Mori

ICALEO 1995; 759-767https://doi.org/10.2351/1.5058980

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 12: LIGHT BASED CLEANING DECONTAMINATION

A laser-based solution to industrial decontamination problems

M.C. Edelson; Ho-Ming Pang; Russell L. Ferguson

ICALEO 1995; 768-777https://doi.org/10.2351/1.5058981

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Physical requirements and methodology necessary to achieve controllable damage-free coating removal using a high energy pulsed laser

Alan E. Hill

ICALEO 1995; 778-787https://doi.org/10.2351/1.5058982

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

The application of YAG laser technology for repair, decontamination and decommissioning of radioactive equipment

Thomas R. Kugler

ICALEO 1995; 788-797https://doi.org/10.2351/1.5058983

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 13: PRECISION LASER MACHINING

Diode-pumped Nd:YAG laser for precision laser machining

Jason Machan; Marcy Valley; Gerry Holleman; Marc Mitchell; Dave Burchman; Jim Zamel; George Harpole; Hagop Injeyan; Len Marabella

ICALEO 1995; 798-807https://doi.org/10.2351/1.5058985

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser drilling of small holes

Warren E. Maher

ICALEO 1995; 808https://doi.org/10.2351/1.5058986

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 15: WELD MODELING

Laser welding of nickel and its heat affected zone microstructure simulation

Li Meng-Yen; Kannatey-Asibu Elijah, Jr.

ICALEO 1995; 1009https://doi.org/10.2351/1.5058877

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Dual beam laser control of flow in the weld pool

Tien-Ching Chen; Fuu-Ren Tsai; Elijah Kannatey-Asibu, Jr.

ICALEO 1995; 1010https://doi.org/10.2351/1.5058878

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 16: WELDING & COMMERCIALIZATION

Investigation of the porosity formation mechanism in laser spot welding

Jong Shin Kim; Takehiro Watanabe; Yoshitaro Yosidda

ICALEO 1995; 1011-1017https://doi.org/10.2351/1.5058879

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

A point and line source analysis of the laser material interaction in hyperbaric keyhole laser welding

R. Ducharme; P. Kapadia; C. Lampa; A. Ivarson; J. Powell; C. Magnusson

ICALEO 1995; 1018-1027https://doi.org/10.2351/1.5058880

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Industrial laser processing - Cost of ownership analysis

Sylvia Nasla-Cook; Gerard Parsons; Paul Hilton

ICALEO 1995; 1028-1034https://doi.org/10.2351/1.5058881

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

A tool for efficient laser processing

E. Beyer; M. Dahmen; B. Fuerst; E.W. Kreutz; H. Nitsch; W. Schulz; G. Turichin

ICALEO 1995; 1035-1039https://doi.org/10.2351/1.5058882

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Laser engineering innovation for Merseyside Industry

K. G. Watkins; W. M. Steen

ICALEO 1995; 1040-1048https://doi.org/10.2351/1.5058883

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

High-volume industrial applications of remote laser-based ultrasound for weld-joint inspection

M. B. Klein; G. J. Dunning; P. V. Mitchell; T. R. O’Meara; M. Chiao; Y. Owechko; D. M. Pepper

ICALEO 1995; 1049-1058https://doi.org/10.2351/1.5058884

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Welding of aluminum: Challenge and chance for laser technology

Friedrich Dausinger; Frank Faisst; Rüdiger Hack; Jürgen Rapp; Helmut Hügel; Markus Beck

ICALEO 1995; 1059-1067https://doi.org/10.2351/1.5058885

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

SESSION 17: OPTICS/SYSTEM

Beam shaping systems for Nd:YAG-lasers: Examples and applications

Wolfgang Bloehs; Friedrich Dausinger

ICALEO 1995; 1068-1077https://doi.org/10.2351/1.5058886

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Deep penetration welding performance of a high average power, multi-kilowatt peak power carbon dioxide laser

S. W. C. Scott; J. D. Strohschein; H. J. J. Seguin

ICALEO 1995; 1078-1087https://doi.org/10.2351/1.5058887

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Adjustable splitter for lasers

William E. Lawson

ICALEO 1995; 1088-1091https://doi.org/10.2351/1.5058888

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Lens designs for high irradiance application of multi-kilowatt Nd:YAG welding lasers

D. M. Keicher; M. Essien

ICALEO 1995; 1092-1101https://doi.org/10.2351/1.5058890

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Processing and testing of hermetic optical connectors, feedthroughs and laser initiated energetic components

L. R. Dosser; D. P. Kramer

ICALEO 1995; 1102-1108https://doi.org/10.2351/1.5058891

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

High power calibration of commercial power meters using an NIST-traceable secondary standard

Michael L. Lander; John O. Bagford; Daniel B. Seibert, II; Robert J. Hull

ICALEO 1995; 1109-1117https://doi.org/10.2351/1.5058892

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

The influence of laser cavity gaseous impurities on the performance of an industrial CO₂ Laser

C. R. Hsu; C. E. Albright; A. Khakhalev

ICALEO 1995; 1118-1127https://doi.org/10.2351/1.5058893

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Real-time laser weld quality monitoring system

Dale U. Chang

ICALEO 1995; 1128-1137https://doi.org/10.2351/1.5058894

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

High power frequency doubled Nd:YAG laser with LiB₃O₅ crystal for industrial applications

Gu Gong-En; Clifford Morrow

ICALEO 1995; 1138-1147https://doi.org/10.2351/1.5058895

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF