Volumes | ICALEO | AIP Publishing

Skip to Main Content

Skip Nav Destination

ICALEO 2010: 29th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing

OPENING PLENARY SESSION

Laser ignition of combustion engines for clean vehicles

Takunori Taira

ICALEO 2010; 1-5https://doi.org/10.2351/1.5062025

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser processing of carbon fiber reinforced plastic (CFRP)

Dietmar Kracht; Peter Jaeschke; Frank Voelkermeyer; Fabian Fischer; Uwe Stute

ICALEO 2010; 6-12https://doi.org/10.2351/1.5062101

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LASER MATERIALS PROCESSING CONFERENCE

LMP 1: High Brightness Lasers, Challenges

Online focus shift measurement in high power fiber laser welding

Daniel Reitemeyer; Thomas Seefeld; Frank Vollertsen

ICALEO 2010; 13-20https://doi.org/10.2351/1.5061991

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comparison of 1 micron transmissive optical materials for high power lasers

Steve Rummel; Gary Herrit; Alan Hedges

ICALEO 2010; 21-28https://doi.org/10.2351/1.5062029

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Latest research results with high power solid state laser optics with minimized focus shift

David Havrilla; Marco Holzer; Peter Olschowsky

ICALEO 2010; 29-32https://doi.org/10.2351/1.5062041

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Characteristics of disk laser-induced plasma

Seung Hwan Lee; Jyoti Mazumder

ICALEO 2010; 33-38https://doi.org/10.2351/1.5062048

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Moving humps at the capillary front in laser welding

Peter Berger; Rainer Schuster; Helmut Hügel; Thomas Graf

ICALEO 2010; 39-43https://doi.org/10.2351/1.5062057

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Utilization of quantitative measurement categories for process monitoring

Jan Weberpals; Rainer Schuster; Peter Berger; Thomas Graf

ICALEO 2010; 44-52https://doi.org/10.2351/1.5062064

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 2: Hybrid Laser Welding Applications

Utilizing laser-GMA hybrid welding in industrial application

Jukka Siltanen

ICALEO 2010; 53-61https://doi.org/10.2351/1.5062076

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Weld seam formation and mechanical properties of girth welds performed with laser-GMA-hybrid process on pipes of grade X65

Sergej Gook; Andrey Gumenyuk; Michael Rethmeier

ICALEO 2010; 62-69https://doi.org/10.2351/1.5062091

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hydra and LUPuS - The exotics among the hybrid welding methods

Uwe Reisgen; Simon Olschok; Stefan Jakobs; Michael Mavany

ICALEO 2010; 70-77https://doi.org/10.2351/1.5062104

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Process monitoring and control during hybrid laser-ARC welding of medium section steel sheets

Wolfgang Fiedler; Alexander Drenker; Stefan Kaierle

ICALEO 2010; 78-84https://doi.org/10.2351/1.5062116

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 3: Laser Drilling

Distortion effects in micro welding with fibre laser

Claus Thomy; Felix Möller; Frank Vollertsen

ICALEO 2010; 85-90https://doi.org/10.2351/1.5062128

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser drilling in ablation regime: Study of drilling velocity with decoupled Q-switch laser

Laurent Berthe; Matthieu Schneider; Maryse Muller; Florian Carro

ICALEO 2010; 91-94https://doi.org/10.2351/1.5062138

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Reliable laser micro-welding of copper

Christoph Rüttimann; Ulrich Dürr; Anas Moalem

ICALEO 2010; 95-100https://doi.org/10.2351/1.5062145

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Continous wave fiber laser keyhole drilling for the production of zero tapered, low recast holes in Ni-alloys

H. K. Sezer; L. Li; S. Leigh; Z. Liu

ICALEO 2010; 101-110https://doi.org/10.2351/1.5061933

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser percussion drilling of coated and uncoated aerospace materials with a high beam quality and high peak power lamp pumped pusled Nd:YAG laser

Mohammed Naeem; Mike Wakeham

ICALEO 2010; 111-120https://doi.org/10.2351/1.5061949

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Drilling of aluminum with high power Q-switched lasers

Leonard Migliore; George Nazary

ICALEO 2010; 121-126https://doi.org/10.2351/1.5061962

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser drilling of nickel alloy: Effect of process gases on drilling time and hole quality

M. M. Okasha; P. T. Mativenga; L. Li; H. K. Sezer

ICALEO 2010; 127-136https://doi.org/10.2351/1.5061972

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 4: Laser Metal Deposition: Process

Wavelength optimization for laser metal deposition

Antonio Candel-Ruiz; Jürgen Metzger

ICALEO 2010; 137-141https://doi.org/10.2351/1.5061988

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comprehensive predictive modeling and parametric analysis of multi-track direct laser deposition processes

Shaoyi Wen; Yung C. Shin

ICALEO 2010; 142-148https://doi.org/10.2351/1.5061996

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

An iterative, energy-mass balance model for laser metal deposition

M. Naveed Ahsan; Wei Wang; Andrew J. Pinkerton

ICALEO 2010; 149-158https://doi.org/10.2351/1.5062009

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

X-ray analysis of pore formation in direct metal deposition and its causes

M. Naveed Ahsan; Robert Bradley; Andrew J. Pinkerton

ICALEO 2010; 159-165https://doi.org/10.2351/1.5062019

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

In-situ spectroscopic analysis of laser induced plasma for monitoring of composition during direct metal deposition process

Lijun Song; Jyoti Mazumder

ICALEO 2010; 166-171https://doi.org/10.2351/1.5062020

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 5: Laser Welding Process

Ultra high speed camera investigations of laser beam welding

Ingemar Eriksson; John Powell; Alexander F. H. Kaplan

ICALEO 2010; 172-178https://doi.org/10.2351/1.5062021

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influencing the melt pool dynamics with short pulses

Rudolf Weber; Roland Gauch; Thomas Graf

ICALEO 2010; 179-183https://doi.org/10.2351/1.5062022

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Novel high-speed space-resolved x-ray system for in-situ diagnostics of laser based processes

Felix Abt; Rudolf Weber; Thomas Graf

ICALEO 2010; 184-190https://doi.org/10.2351/1.5062023

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Studies in the interpretation of the reflected feedback from laser welding

R. Olsson; I. Eriksson; J. Powell; A. V. Langtry; A. F. H. Kaplan

ICALEO 2010; 191-199https://doi.org/10.2351/1.5062024

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence on the efficiency of the heat conduction mode laser beam welding process regarding different laser spot geometries

Rüdiger Daub; Robert Wiedenmann; Achim Mahrle; Jeudi Duong; Michael F. Zaeh

ICALEO 2010; 200-208https://doi.org/10.2351/1.5062026

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Interaction time effects on the transition between conduction and keyhole laser welding

Eurico Assuncao; Stewart Williams; David Yapp

ICALEO 2010; 209-216https://doi.org/10.2351/1.5062027

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser power modulation at the threshold from heat-conduction to deep-penetration welding

Peter Stritt; Rudolf Weber; Thomas Graf; Steffen Müller; Christian Ebert

ICALEO 2010; 217-224https://doi.org/10.2351/1.5062028

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hot cracking in high power laser beam welding of thick high strength structural steels under restraint conditions

Vanessa Quiroz; Moritz Gebhardt; Sergej Gook; Andrey Gumenyuk; Michael Rethmeier

ICALEO 2010; 225-232https://doi.org/10.2351/1.5062030

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 7: Laser Cutting I

Self-optimizing focus technique (SOFT) – A new approach on the way to next generation cognitive laser cutting machines

T. Molitor; F. Schneider; T. Bußkamp; U. Thombansen; U. Eppelt; D. Petring; W. Schulz

ICALEO 2010; 233-238https://doi.org/10.2351/1.5062031

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The numerical studies of the laser processing parameters on copper and aluminum during laser cutting

Dongkyoung Lee; Jyotirmoy Mzaumder

ICALEO 2010; 239-248https://doi.org/10.2351/1.5062032

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A comparative study on fusion cutting with disk and CO₂ lasers

Leonardo Daniele Scintilla; Luigi Tricarico; Achim Mahrle; Andreas Wetzig; Thomas Himmer; Eckhard Beyer

ICALEO 2010; 249-258https://doi.org/10.2351/1.5062033

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Relationships between the melt dynamics and cut finishing in laser cutting

A. Riveiro; F. Quintero; F. Lusquiños; M. Boutinguiza; R. Comesaña; J. Pou

ICALEO 2010; 259-265https://doi.org/10.2351/1.5062034

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Energy balance of laser-oxygen cutting of thick steel sheets with minimal roughness

Vasily Fomin; Alexandr Malikov; Anatoly Orishich; Victor Shulyatyev

ICALEO 2010; 266-269https://doi.org/10.2351/1.5062035

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Single-sided laser tube cutting for nuclear decommissioning applications

Ali Khan; Paul Hilton

ICALEO 2010; 270-276https://doi.org/10.2351/1.5062036

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser triming of hot formed steels: A comparison between 10,6 and 1µm laser light

Ivo Gasner

ICALEO 2010; 277-280https://doi.org/10.2351/1.5062037

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 8: Laser Metal Deposition Material

Laser surface alloying (LSA) of aluminium (AA 1200) with TiB₂ for hardness improvement

Abimbola Patricia Popoola; Sisa Pityana

ICALEO 2010; 281-288https://doi.org/10.2351/1.5062038

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Supersonic laser deposition of Ti and Ti64 alloys

M. Bray; A. Cockburn; M. Sparkes; A. Lupoi; W. O’Neill

ICALEO 2010; 289-297https://doi.org/10.2351/1.5062039

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cladding of cobalt alloy with ceramic nanopowder on steel

M. Ángeles Montealegre; Ana T. Pérez; Jorge L. Arias; Pilar Rey; Gemma Castro; Marcos González

ICALEO 2010; 298-303https://doi.org/10.2351/1.5062040

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Increasing the deposition rate of inconel 718 for LMD

Johannes Witzel; Ingomar Kelbassa; Andres Gasser; Gerhard Backes

ICALEO 2010; 304-310https://doi.org/10.2351/1.5062042

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Correlation between temperature distribution and formed microstructure of in-situ laser cladding of Fe-TiC on carbon steel

Ali Emamian; Masoud Alimardani; Stephen F. Corbin; Amir Khajepour

ICALEO 2010; 311-316https://doi.org/10.2351/1.5062043

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct fabrication of a Ti-47Al-2Cr-2Nb alloy by direct metal deposition

P. Aubry; T. Malot; P. Peyre; V. Ji; Vera Kottman Rexerodt; M. Thomas; T. Vilaro; C. Colin

ICALEO 2010; 317-325https://doi.org/10.2351/1.5062044

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study on laser parameters effect on morphology of in-situ Fe-TiC particles deposition on mild steel using laser cladding process

Ali Emamian; Stephen F.Corbin; Amir Khajepour

ICALEO 2010; 326-332https://doi.org/10.2351/1.5062045

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 9: Laser Cutting II

High power laser cutting of CFRP, and laser direct joining of CFRP to metal

Seiji Katayama; Kwang-Woon Jung; Yousuke Kawahito

ICALEO 2010; 333-338https://doi.org/10.2351/1.5062046

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fibre laser material processing of aerospace composites

Paul French; Mo Naeem; Alexander Wolynski; Martin Sharp

ICALEO 2010; 339-346https://doi.org/10.2351/1.5062047

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cutting of phenolic resin panels: Identification of potential hazards

Félix Quintero; Antonio Riveiro; Fernando Lusquiños; Rafael Comesaña; Juan Pou

ICALEO 2010; 347-353https://doi.org/10.2351/1.5062049

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Quality of remote cutting

Anssi Pihlava; Tuomas Purtonen; Antti Salminen; Veli Kujanpää; Lars Hartwig; Joerg Schille

ICALEO 2010; 354-361https://doi.org/10.2351/1.5062050

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Methodical qualification of scanner systems for remote laser cutting

Michael F. Zaeh; Jan Musiol; Johannes Moesl

ICALEO 2010; 362-370https://doi.org/10.2351/1.5062051

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 10: Automotive Laser Welding Applications

Laser welding applied to advanced high strength steels for automotive applications

Rosa Arias; Álvaro Prada; Eva Vaamonde; Ambroise Vandewynckèle; David Gutierrez; Antoni Lara; Michel García

ICALEO 2010; 371-379https://doi.org/10.2351/1.5062052

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Remote laser welding of zinc-coated sheet metal component in a lap configuration utilizing humping effect

Hongping Gu; Boris Shulkin

ICALEO 2010; 380-385https://doi.org/10.2351/1.5062053

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Welding zinc coated steels: New joint design and strategy with scanner technology

Klaus Loeffler; Tim Hesse; Peter Kaupp

ICALEO 2010; 386-388https://doi.org/10.2351/1.5062054

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Distortion and residual stresses in laser beam welded shaft-hub joints

Frank Buschenhenke; Michael Hofmann; Thomas Seefeld; Frank Vollertsen

ICALEO 2010; 389-397https://doi.org/10.2351/1.5062055

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 11: Laser Metal Deposition for Machine Components

Process parameters analysis of high power direct diode laser cladding

Soundarapandian Santhanakrishnan; Fanrong Kong; Radovan Kovacevic

ICALEO 2010; 398-407https://doi.org/10.2351/1.5062056

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser reconditioning of crankshafts: From lab to application

Henry Koehler; Knut Partes; Thomas Seefeld; Frank Vollertsen

ICALEO 2010; 408-415https://doi.org/10.2351/1.5062058

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Simultaneous sub second laser welding of polymers with diffractive optics

Petri Laakso; Saara Ruotsalainen; Tuomas Purtonen; Hannu Minkkinen; Veli Kujanpää; Antti Salminen

ICALEO 2010; 416-423https://doi.org/10.2351/1.5062059

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 12: Welding of Lite Metals

Welding of titanium, steel and aluminium – Lithium alloy by the cw CO₂ laser beam

Yuri Afonin; Anatoly Orishich; Anatoly Cherepanov

ICALEO 2010; 424-428https://doi.org/10.2351/1.5062060

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-brightness disk laser welding of magnesium alloys

Mohamed Wahba; Masami Mizutani; Yousuke Kawahito; Seiji Katayama

ICALEO 2010; 429-435https://doi.org/10.2351/1.5062061

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of Mg tube using laser welding for bike frame

Mok-Young Lee

ICALEO 2010; 436-443https://doi.org/10.2351/1.5062062

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 13: Removal of Coatings

Polygon scanner for laser paint stripping

Stan Ream; Craig Walters

ICALEO 2010; 444-450https://doi.org/10.2351/1.5062063

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Surface preparation for shipbuilding using pulsed high-power fibre laser

T. J. Kwee; G. X. Chen; N. R. Lei; K. P. Tan; Y. S. Choo; M. H. Hong

ICALEO 2010; 451-455https://doi.org/10.2351/1.5062065

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Underwater laser cleaning for marine and offshore applications

G. X. Chen; T. J. Kwee; N. R. Lei; K. P. Tan; Y. S. Choo; M. H. Hong

ICALEO 2010; 456-460https://doi.org/10.2351/1.5062066

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 14: Direct Laser Manufacturing

The effect of deposition pattern on thermal stress and deformation in laser solid forming

Xin Lin; Bo Wang; Jun Yu; Liang Ma; Jing Chen; Weidong Huang

ICALEO 2010; 461-468https://doi.org/10.2351/1.5062067

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Additive manufacturing of functional components – Recent developments and challenges for the future

Thomas Rechtenwald; Thomas Frick; Cornelius von Wilmowsky; Dirk Pohle; Philipp Amend; Claudia Pscherer; Michael Schmidt

ICALEO 2010; 469-478https://doi.org/10.2351/1.5062068

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct manufacturing of net-shape functional components/test-pieces for aerospace, automotive and other applications

Lijue Xue; Yangsheng Li; Shaodong Wang

ICALEO 2010; 479-488https://doi.org/10.2351/1.5062069

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications

Yaser Shanjani; Andrew J. Pinkerton; Ehsan Toyserkani

ICALEO 2010; 489-494https://doi.org/10.2351/1.5062070

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of beam geometry on diode laser forming of sheet metals

M. S. C. Jamil; A. J. Pinkerton; L. Li; M. A. Sheikh

ICALEO 2010; 495-502https://doi.org/10.2351/1.5062071

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 15: Other Laser Processes

Advances in laser processing of metal matrix composites (MMCS)

Annamaria Gisario; Francesco Veniali

ICALEO 2010; 503-512https://doi.org/10.2351/1.5062072

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser assisted machining: Its potential and future

Yung C. Shin

ICALEO 2010; 513-522https://doi.org/10.2351/1.5062073

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Matlab laser toolbox

Gert-willem Römer; A. J. Huis in ‘t Veld

ICALEO 2010; 523-529https://doi.org/10.2351/1.5062074

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Chances and challenges in processing with high brightness lasers

Thomas Seefeld

ICALEO 2010; 530-539https://doi.org/10.2351/1.5062075

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 16: Laserwelding CU and Nonmetal

Benefits from combining laser beams with different wavelengths (green and IR) for copper welding

Axel Hess; Andreas Heider; Rainer Schuster; Rudolf Weber; Thomas Graf

ICALEO 2010; 540-546https://doi.org/10.2351/1.5062078

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Learning more about laser beam welding by applying it to copper and copper alloys

Dirk Petring; Vahid Nazery Goneghany

ICALEO 2010; 547-553https://doi.org/10.2351/1.5062079

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser welding of dissimilar copper-aluminum connections by means of roll-cladded inserts

Markus Weigl; Alexander Grimm; Thomas Frick; Michael Schmidt

ICALEO 2010; 554-561https://doi.org/10.2351/1.5062080

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Analysis of laser welding of long fiber reinforced composites

C. Binetruy; A. Bueter; P. Castaing; S. Clement; M. Deleglise; C. Franz; A. Giessl; W. Knapp; M. Oumarou; J. Renard; A. Roesner

ICALEO 2010; 562-566https://doi.org/10.2351/1.5062081

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

New perspectives for the absorber free laser welding of thermoplastics

Andrei Boglea; Andreas Rösner; Alexander Olowinsky

ICALEO 2010; 567-572https://doi.org/10.2351/1.5062082

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 17: Laser Surface Modification

A thermo-kinetic phase transformation model for multi-pass laser heat treatment by using high power direct diode laser

Soundarapandian Santhanakrishnan; Fanrong Kong; Radovan Kovacevic

ICALEO 2010; 573-582https://doi.org/10.2351/1.5062083

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Local laser heat treatment of stainless steel at very high speed

Steffen Bonss; Jan Hannweber; Udo Karsunke; Stefan Kuehn; Marko Seifert; Eckhard Beyer

ICALEO 2010; 583-587https://doi.org/10.2351/1.5062084

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of laser surface melting on corrosion behavior of aged duplex stainless steel

W. K. Chan; C. T. Kwok; K. H. Lo

ICALEO 2010; 588-596https://doi.org/10.2351/1.5062085

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser polishing of metallic freeform surfaces

Roman Ostholt; Edgar Willenborg; Konrad Wissenbach

ICALEO 2010; 597-603https://doi.org/10.2351/1.5062086

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Interfacial structure of nano WC powder cold planting via laser shock peening onto light metal surfaces

Liang Lv; Minlin Zhong; Changsheng Dong; Mingxing Ma; Wenjin Liu

ICALEO 2010; 604-611https://doi.org/10.2351/1.5062087

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-based production of thin wear-protection films

Dominik Hawelka; Jochen Stollenwerk; Norbert Pirch; Konrad Wissenbach

ICALEO 2010; 612-617https://doi.org/10.2351/1.5062088

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 18: Laser Welding Sub Athmospheric Pressure and Thick Section

Prevention of porosity in deep partial penetration laser and hybrid welding with minimum solute oxygen in the weld metal

Susumu Tsukamoto; Lin Zhao; Goro Arakane; Tomohiro Sugino; Koichi Yasuda

ICALEO 2010; 618-625https://doi.org/10.2351/1.5062089

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

New advanced energy efficient cooling solutions for lasers

Steffen Voigtmann; Christoph Mudra; Wolfgang Todt

ICALEO 2010; 626-631https://doi.org/10.2351/1.5062090

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Properties of welded joint for narrow gap laser welding of austenitic stainless steels

Xudong Zhang; Eiji Ashida; Shoh Tarasawa

ICALEO 2010; 632-637https://doi.org/10.2351/1.5062092

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser beam welding in vacuum – A process variation in comparison with electron beam welding

Uwe Reisgen; Simon Olschok; Stefan Longerich

ICALEO 2010; 638-647https://doi.org/10.2351/1.5062093

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Deep penetration welding with high power laser under vacuum

Yohei Abe; Masami Mizutani; Yousuke Kawahito; Seiji Katayama

ICALEO 2010; 648-653https://doi.org/10.2351/1.5062094

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMP 19: Laser Welding

Parameter selection in laser welding using the power factor concept

Wojciech Suder; Stewart Williams

ICALEO 2010; 654-659https://doi.org/10.2351/1.5062095

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser welding of tube to tube-sheet joint in steam generators for nuclear power plants

Rosa Arias; Eva Vaamonde; Ambroise Vandewynckèle; Enrique Piñeiro; Pedro Veron

ICALEO 2010; 660-667https://doi.org/10.2351/1.5062096

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of heat input modification on duplex stainless weld quality

Antti Salminen; Elin M. Westin

ICALEO 2010; 668-675https://doi.org/10.2351/1.5062097

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser welding parameters effects on austenitic stainless steels welds microstructure

Joonas Pekkarinen; Veli Kujanpää

ICALEO 2010; 676-682https://doi.org/10.2351/1.5062098

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser welding: The spatter map

Alexander F. H. Kaplan; John Powell

ICALEO 2010; 683-690https://doi.org/10.2351/1.5062099

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Welding of dissimilar materials with 1kW fiber laser

Mohammed Naeem; Richard Jessett; Kevin Withers

ICALEO 2010; 691-701https://doi.org/10.2351/1.5062100

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Measuring process speed at tool center point

Christoph Franz; Peter Abels

ICALEO 2010; 702-706https://doi.org/10.2351/1.5062102

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LASER MICROPROCESSING CONFERENCE

LMF 1: Picosecond and Femtosecond Laser Processing

Processing of dielectric materials and metals with PS laserpulses

Beat Neuenschwander; Guido F. Bucher; Guido Hennig; Christian Nussbaum; Benjamin Joss; Martin Muralt; S. Zehnder; Urs W. Hunziker; Peter Schütz

ICALEO 2010; 707-715https://doi.org/10.2351/1.5062103

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Critical performance aspects of ultrashort pulse laser materials processing at high repetition rates and average powers

A. Ancona; S. Döring; S. Hädrich; J. Limpert; S. Nolte; A. Tünnermann

ICALEO 2010; 716-722https://doi.org/10.2351/1.5062105

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of process strategies on thermal load during CFRP manufacturing using picosecond laser pulses

Alexander Wolynski; Hatim Haloui; Patrick Mucha; Andreas Gleiter; Paul French; Rudolf Weber; Thomas Graf

ICALEO 2010; 723-730https://doi.org/10.2351/1.5062106

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micromachining of CFRP by ultra-short pulse lasers

Masayuki Fujita; Toshihiro Somekawa; Takumi Ozaki; Minoru Yoshida; Noriaki Miyanaga; Yutaka Mitooka; Kazuhisa Mikame; Hideyasu Shamoto

ICALEO 2010; 731-733https://doi.org/10.2351/1.5062107

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 2: Advanced Lasers and Optical Systems for Microprocessing

Status quo and outlook of power scaling of ultrafast lasers

P. Russbueldt; T. Mans; H. D. Hoffmann; R. Poprawe

ICALEO 2010; 734-740https://doi.org/10.2351/1.5062108

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-speed ablation processes with nanosecond and picosecond lasers

Severin Massa; Simone Russ; Rene Siebert; Birgit Faisst; Sascha Weiler; Juergen Stollhof

ICALEO 2010; 741-742https://doi.org/10.2351/1.5062109

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Choice of laser sources for micromachining applications

Mohammed Naeem

ICALEO 2010; 743-752https://doi.org/10.2351/1.5062110

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Large-scale Riblet surfaces using multi-spot micro machining

Frank Siegel; Viktor Schütz; Uwe Stute; Rainer Kling

ICALEO 2010; 753-761https://doi.org/10.2351/1.5062111

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microdrilling of sheet materials with femtosecond laser pulse shaped by computer generated hologram

Hayato Kawashima; Masahiro Yamaji; Jun’ichi Suzuki; Shuhei Tanaka

ICALEO 2010; 762-766https://doi.org/10.2351/1.5062112

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Application of adaptive optics to laser micromachining

Jonathan Parry; Rainer Beck; Nick Weston; Jonathan Shephard; Duncan Hand

ICALEO 2010; 767-776https://doi.org/10.2351/1.5062113

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 3: Surface Microstructuring and Modification I

Precise laser cutting of narrowings in miniature fuse links by use of fiber laser and YAG (355 nm) laser

Ryszard Pawlak; Adam Rosowski; Mariusz Tomczyk; Maria Walczak

ICALEO 2010; 777-783https://doi.org/10.2351/1.5062114

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

YAGboss - Laser micro-sculpting of metal surfaces for the manufacture of high precision optical encoder scale

S. Giet; F. Albri; M. D. Kidd; J. D. Shephard; N. J. Weston; D. P. Hand

ICALEO 2010; 784-790https://doi.org/10.2351/1.5062115

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Ultrashort pulse periodic surface structuring of metallic surfaces

Leigh Mellor; Stuart P. Edwardson; Walter Perrie; Geoff Dearden; Ken Watkins

ICALEO 2010; 791-798https://doi.org/10.2351/1.5062117

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effects of laser fluence on the micro-structure formation and material removal rate in ablation of silicon carbide

G. C. Lim; Mark A. C. Tan; C. W. Tan; H. Y. Zhong

ICALEO 2010; 799-805https://doi.org/10.2351/1.5062118

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser surface processing for stress and damage mitigation in SIC

Ronald L. Jacobsen; Joseph Randi; Sarah Payne

ICALEO 2010; 806-810https://doi.org/10.2351/1.5062119

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micro-cladding: A novel laser additive technique to produce hard micro-coatings

J. del Val; R. Comesaña; F. Lusquiños; A. Riveiro; F. Quintero; J. Pou

ICALEO 2010; 811-817https://doi.org/10.2351/1.5062120

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Metal particle implantation by laser irradiation in borosilicate glass

Hirofumi Hidai; Takato Yamazaki; Sho Itoh; Kuniaki Hiromatsu; Hitoshi Tokura

ICALEO 2010; 818-822https://doi.org/10.2351/1.5062121

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of laser irradiation passes for fabricating mid-wave infrared silicon carbide detectors

Geunsik Lim; Tariq Manzur; Aravinda Kar

ICALEO 2010; 823-831https://doi.org/10.2351/1.5062122

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 4: Microjoining

High efficiency micro-welding using high brightness lasers with tailored beam properties

Paul Harrison; Andy Appleyard

ICALEO 2010; 832-838https://doi.org/10.2351/1.5062123

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Enhancing process stability in infrared laser micro welding of copper using frequency converted short prepulses

Anas Moalem; Philipp von Witzendorff; Maik Frede; Rainer Kling

ICALEO 2010; 839-843https://doi.org/10.2351/1.5062124

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser beam welding of electrical interconnections for lithium-ion batteries

Jens Gedicke; Benjamin Mehlmann; Alexander Olowinsky; Arnold Gillner

ICALEO 2010; 844-849https://doi.org/10.2351/1.5062125

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Thermokinetic processes in laser welding of current leads

Ryszard Pawlak; Mariusz Tomczyk; Maria Walczak; Adam Rosowski

ICALEO 2010; 850-855https://doi.org/10.2351/1.5062126

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser welding of micro-VLE-measurement device and its practical application

Marika Hirvimäki; Heidi Piili; Arttu Jussila; Tuomas Purtonen; Matti Manninen; Petri Uusi-Kyyny; Aarne Sundberg; Ville Alopaeus; Antti Salminen

ICALEO 2010; 856-863https://doi.org/10.2351/1.5062127

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct joining of FPC and metal electrode by pulsed Nd:YAG laser

Mohd Idris Shah Ismail; Yasuhiro Okamoto; Yoshiyuki Uno

ICALEO 2010; 864-870https://doi.org/10.2351/1.5062129

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Low temperature wafer-level packaging of mems using selective laser bonding

Norbert Lorenz; Martin D. Smith; Duncan P. Hand

ICALEO 2010; 871-876https://doi.org/10.2351/1.5062130

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser splicing technology for thermoplastic film material

Naoyuki Matsuo; Mayu Shimoda; Ryuta Kibe; Atsushi Hino; Peter Abels; Andreas Roesner; Alexander Olowinsky

ICALEO 2010; 877-883https://doi.org/10.2351/1.5062131

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 5: Surface Microstructuring and Modification II

Permanent marking on stainless steels for corrosion resistance through control of oxide growth

Hongqiang Chen; Geoff Shannon; Mark Brodsky

ICALEO 2010; 884-889https://doi.org/10.2351/1.5062132

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser fabrication of nanobump arrays on Si substrate via optical near-field enhancement

X. C. Wang; H. Y. Zheng; C. W. Tan; F. Wang; H. Y. Yu; K. L. Pey

ICALEO 2010; 890-895https://doi.org/10.2351/1.5062133

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microlens arrays fabricated on polycarbonate sheets via pulsed laser maskless interference patterning

Rui Guo; Dajun Yuan; Suman Das

ICALEO 2010; 896-899https://doi.org/10.2351/1.5062134

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fabrication of hierarchical microstructures on metals by means of direct laser interference patterning

Matthias Bieda; Andrés F. Lasagni; Eckhard Beyer

ICALEO 2010; 900-907https://doi.org/10.2351/1.5062135

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Picosecond Laser 4-beam interference ablation of metal films for microstructuring

B. Voisiat; M. Gedvilas; G. Raciukaitis

ICALEO 2010; 908-916https://doi.org/10.2351/1.5062136

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-induced plasma investigations during material processing

David Diego-Vallejo; David Ashkenasi; Gerd Illing; Hans Joachim Eichler

ICALEO 2010; 917-924https://doi.org/10.2351/1.5062137

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Investigations on the laser induced polymerization of organic-inorganic hybrid oligomers for micro stereo lithography applications

André Neumeister; Martina Carsjens; Florian Pape; Lutz Rissing; Rainer Kling

ICALEO 2010; 925-932https://doi.org/10.2351/1.5062139

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser materials synthesis of a wide bandgap energy convertor with embedded concentrator and DC-AC inverter

A. Kar; N. Quick

ICALEO 2010; 933-939https://doi.org/10.2351/1.5062140

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 6: Pulse-Shape & Tailored-Beam Control of Laser Interaction

Laser ablation by optical vortex beams

Takashige Omatsu

ICALEO 2010; 940-941https://doi.org/10.2351/1.5062141

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Application of a pulse programmable fiber laser to a broad range of micro-processing applications

M. Rekow; R. Murison; T. Panarello; C. Dunsky; C. Dinkel; S. Nikumb

ICALEO 2010; 942-950https://doi.org/10.2351/1.5062142

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Pulse shape control of a MOPA fiber laser for marking of stainless steel and other materials

Sami T. Hendow; Paulo T. Guerreiro; Niels Schilling; Jan Rabe

ICALEO 2010; 951-958https://doi.org/10.2351/1.5062143

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 7: Micromachining of Brittle Materials

Optimization of UV laser scribing process for led sapphire wafers

Ashwini Tamhankar; Rajesh Patel

ICALEO 2010; 959-965https://doi.org/10.2351/1.5062144

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Suppression of laser plasma melting side walls in laser drilling high aspect ratio microvias

V. N. Tokarev; V. A. Shmakov; V. A. Yamschikov; R. R. Khasaya; S. I. Mikolutskiy; V. Yu. Khomich

ICALEO 2010; 966-975https://doi.org/10.2351/1.5062146

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Multi-wavelength micromachining of silicon and glass by Q-switched short pulsed lasers

Shiva Gadag; Radovan Kovacevic

ICALEO 2010; 976-983https://doi.org/10.2351/1.5062147

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Design of a microdistillation column

Matti Manninen; Aarne Sundberg; Heidi Piili; Antti Salminen

ICALEO 2010; 984-993https://doi.org/10.2351/1.5062148

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Micromachining of glassy carbon toolsets for micro embossing applications

P. Chopra; Kun Li; William O’Neill; Jack Gabzdyl

ICALEO 2010; 994-996https://doi.org/10.2351/1.5062149

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 8: Chemical and Media-Assisted Laser Microprocessing

Laser micromachining of silicon substrates: Investigation and utilisation of assist media

Alan Conneely; Sedao; Natalie Haustrup; Gerard M. O’Connor

ICALEO 2010; 997-1004https://doi.org/10.2351/1.5062150

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

3D-microstructuring of sapphire using high power fs-laser radiation and selective etching

Maren Hörstmann-Jungemann; Jens Gottmann

ICALEO 2010; 1005-1011https://doi.org/10.2351/1.5061931

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser scribing of stainless steel with and without work media

Anna Unt; Heidi Piili; Marika Hirvimäki; Matti Manninen; Antti Salminen

ICALEO 2010; 1012-1021https://doi.org/10.2351/1.5061932

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 9: Micromaching and Drilling

Micro-cutting with nanosecond pulsed fiber lasers

Jack Gabzdyl; Mark Brodsky

ICALEO 2010; 1022-1027https://doi.org/10.2351/1.5061934

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fibre laser material processing of aerospace composites

Paul French; Mo Naeem; Alexander Wolynski; Martin Sharp

ICALEO 2010; 1028-1035https://doi.org/10.2351/1.5061935

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mixed mode ablation used for improvements in laser machining

E. Gounaris; D. Casioppo; P. Denney

ICALEO 2010; 1036-1045https://doi.org/10.2351/1.5061937

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micro machining of glass, ceramics and metals utilizing trepanning optics

David Ashkenasi; Tristan Kaszemeikat; Norbert Mueller; Hans Joachim Eichler; Gerd Illing

ICALEO 2010; 1046-1054https://doi.org/10.2351/1.5061938

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

On the percussion drilling of Si using a 20W MOPA based Yb fiber laser

Kun Li; William O’Neill; Jack Gabzdyl

ICALEO 2010; 1055-1063https://doi.org/10.2351/1.5061939

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 10: Microprocessing of Glasses and Other Transparent Materials

Novel processes in laser microfabrication and microjoining

Kazuyoshi Itoh; Yasuyuki Ozeki

ICALEO 2010; 1064-1068https://doi.org/10.2351/1.5061940

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Transmission welding of glasses by femtosecond laser: Structural and mechanical properties

Panjawat Kongsuwan; Y. Lawrence Yao

ICALEO 2010; 1069-1078https://doi.org/10.2351/1.5061941

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Femtosecond laser machining of SiO₂ microfluidic devices for cellular imaging during chemotaxis analysis

L. Costa; A. Terekhov; W. Hofmeister; D. Rajput; K. Lansford; D. Jowhar; C. Janetopoulos

ICALEO 2010; 1079-1083https://doi.org/10.2351/1.5061942

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Picosecond laser-induced color centers in glass optics

David Ashkenasi; Andreas Lemke

ICALEO 2010; 1084-1091https://doi.org/10.2351/1.5061943

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 11: Laser Processing of Silicon Solar Cells

Beam delivery techniques for laser fired contacts

Zhenyan Hua; Edward W. Reutzel; Lian Zou

ICALEO 2010; 1092-1098https://doi.org/10.2351/1.5061944

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Process optimization for improving drilling efficiency in EWT solar cell manufacturing

Henrikki Pantsar; Thomas Eisenbeis; Mathew Rekow; Richard Murison; Hans Herfurth; Stefan Heinemann

ICALEO 2010; 1099-1106https://doi.org/10.2351/1.5061945

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Concept and realization of a high-rate laser drilling process reaching for ten thousand holes per second and beyond

Malte Schulz-Ruhtenberg; Tobias Baier; Ernst-Wilhelm Boeckler; Christoph Siebert

ICALEO 2010; 1107-1110https://doi.org/10.2351/1.5061946

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Picosecond ablation of silicon nitride using 532 nm master oscillator fiber power amplifier for patterning crystalline silicon photovoltaic cells

Brian Baird; Tim Gerke

ICALEO 2010; 1111-1114https://doi.org/10.2351/1.5061947

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Depth selective laser scribing of thin-film silicon solar cells on foil

Laurie Wipliez; Jochen Löffler; Martijn de Keijzer; Wim Soppe; homas Sebastien; Aart Schoonderbeek; Oliver Haupt; Uwe Stute

ICALEO 2010; 1115-1123https://doi.org/10.2351/1.5061948

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 12: Biomedical Applications

Micropillar fabrication on bovine cortical bone by direct write femtosecond laser ablation

Y. C. Lim; K. Altman; D. F. Farson; K. M. Flores

ICALEO 2010; 1124-1132https://doi.org/10.2351/1.5061950

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optical micro/nanopatterning on curved Ti surfaces by transported, flexible micro-particle lens array

Ashfaq Khan; Zengbo Wang; Mohammad A. Sheikh; David J. Whitehead; Lin Li

ICALEO 2010; 1133-1138https://doi.org/10.2351/1.5061951

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Metal and stent cutting using water jet-guided laser technology

A. Pauchard; M. Gobet; F. Juvet; A. Schreiner

ICALEO 2010; 1139-1145https://doi.org/10.2351/1.5061952

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

CO₂ whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability

David G. Waugh; Jonathan Lawrence

ICALEO 2010; 1146-1155https://doi.org/10.2351/1.5061953

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Using UV laser surface treatment to modify the wettability characteristics of polyamide 6, 6 and its effects on osteoblast cell activity

David G. Waugh; Jonathan Lawrence

ICALEO 2010; 1156-1165https://doi.org/10.2351/1.5061954

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Patterning of magnesium with silver nanoparticles using laser assisted direct writing

Ehsan Foroozmehr; Hamidreza Alemohammad; Ehsan Toyserkani; Shahrzad Esmaeili

ICALEO 2010; 1166-1171https://doi.org/10.2351/1.5061955

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comparison of dry and wet fibre laser precision cutting for coronary stent manufacture

N. Muhammad; D. Whitehead; A. Boor; L. Li

ICALEO 2010; 1172-1180https://doi.org/10.2351/1.5061956

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LMF 13: Laser Processing of Thin-Film Solar Cells And LCDs

Refractive field mapping beam shaping optics: Important features for a right choice

Alexander Laskin; Vadim Laskin

ICALEO 2010; 1181-1189https://doi.org/10.2351/1.5061957

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Femtosecond laser ablation of indium tin oxide (ITO) glass for fabrication of thin film solar cells

Q. Bian; X. Shen; S. Chen; Z. Chang; S. Lei

ICALEO 2010; 1190-1198https://doi.org/10.2351/1.5061958

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Application of induced laser ablation with ultra short pulse lasers for high speed thin film solar cell processing

Gerhard Heise; Marcel Dickmann; Jan Konrad; Isabell Richter; Sebastian Sarrach; Andreas Heiss; Helmut Vogt; Heinz P. Huber

ICALEO 2010; 1199-1205https://doi.org/10.2351/1.5061959

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High precision scribing of solar cell films by a picosecond laser

Wenqian Hu; Yung C. Shin

ICALEO 2010; 1206-1209https://doi.org/10.2351/1.5061960

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Scribing of thin films with picosecond laser pulses for cigs solar cells

P. Gečys; G. Račiukaitis; M. Gedvilas; A. Braun; S. Ragnow

ICALEO 2010; 1210-1219https://doi.org/10.2351/1.5061961

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of wide operational range fiber laser for processing thin film photovoltaic panels

Shinobu Tamaoki; Yasuomi Kaneuchi; Motoki Kakui; Brian Baird; Naba R. Paudel; Kristopher Wieland

ICALEO 2010; 1220-1225https://doi.org/10.2351/1.5061963

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser structuring of thin films for organic solar cells

Aart Schoonderbeek; Maik Bärenklau; Roland Rösch; Burhan Muhsin; Oliver Haupt; Harald Hoppe; Dieter Teckhaus; Uwe Stute

ICALEO 2010; 1226-1234https://doi.org/10.2351/1.5061964

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Improving laser technologies in photovoltaics by refractive beam shapers

Alexander Laskin; Vadim Laskin

ICALEO 2010; 1235-1241https://doi.org/10.2351/1.5061965

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

NANOMANUFACTURING CONFERENCE

Nano 1: Direct Laser Writing in Nano Fabrication

Holographic lithography and two-photon lithography for the fabrication of waveguide defects in three-dimensional photonic crystals

Kris Ohlinger; Yuankun Lin; Faraon Torres; Karen Lozano; Di Xu; Kevin P. Chen

ICALEO 2010; 1242-1248https://doi.org/10.2351/1.5061966

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct-write femtosecond laser ablation and DNA combing and imprinting for fabrication of a nanofluidic device on ethylene glycol dimethacrylate polymer

Yong Chae Lim; Pouyan Bokany; Dave F. Farson; Lee J. Lee

ICALEO 2010; 1249-1256https://doi.org/10.2351/1.5061967

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Review of methods of direct laser surface nanostructuring of materials

V. N. Tokarev; V. A. Shmakov; V. A. Yamschikov; R. R. Khasaya; S. I. Mikolutskiy; S. V. Nebogatkin; V. Yu. Khomich

ICALEO 2010; 1257-1265https://doi.org/10.2351/1.5061968

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

EUV-pump-probe microscopy of fs-laser induced nano-structure formation

Dirk Wortmann; Martin Reininghaus; Larissa Juschkin; Ralf Freiberger

ICALEO 2010; 1266-1269https://doi.org/10.2351/1.5061969

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Nano 2: Nano Fabrication Using Ultrafast Lasers

Micro-hole drilling on cemented tungsten carbide by ultrashort laser pulses

Khai Pham Xuan; Kazuya Saginawa; Rie Tanabe; Yoshiro Ito

ICALEO 2010; 1270-1275https://doi.org/10.2351/1.5061970

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Nano 3: Direct Growth of Nano Structure Using Lasers

Fabricating active plasmonic structures by combining laser-, electron- and ion-beam techniques

Richard Haglund; Eugene Donev; Benjamin Lawrie; Richard Mu; Jae Suh

ICALEO 2010; 1276-1285https://doi.org/10.2351/1.5061971

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Precise growth and integration of carbon nanotubes through optical control

Yun Shen Zhou; Wei Xiong; Masoud Mahjouri-Samani; Matt Mitchell; Yong Feng Lu

ICALEO 2010; 1286-1295https://doi.org/10.2351/1.5061973

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Large area laser interference patterning for periodic growth of individual ZnO nanowires

Dajun Yuan; Rui Guo; Yaguang Wei; Wenzhuo Wu; Zhonglin Wang; Suman Das

ICALEO 2010; 1296-1302https://doi.org/10.2351/1.5061974

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Embedding laser-generated nanoparticles into bioactive polymers for medical devices

Stephan Barcikowski; Andreas Schwenke; Philipp Wagener

ICALEO 2010; 1303-1306https://doi.org/10.2351/1.5061975

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Growth of carbon nano-onions in open air by laser resonant excitation of ethylene precursor

Y. Gao; J. B. Park; Y. S. Zhou; X. N. He; Z. Q. Xie; Y. F. Lu

ICALEO 2010; 1307-1311https://doi.org/10.2351/1.5061976

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

POSTER PRESENTATION GALLERY

Wireless & powerless sensing node for laser welding monitoring

Giuseppe D’Angelo

ICALEO 2010; 1312-1316https://doi.org/10.2351/1.5061977

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

In-situ melt identification during laser beam welding

Michael F. Zaeh; Sonja Huber

ICALEO 2010; 1317-1322https://doi.org/10.2351/1.5061978

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser microprocessing powered by UV photons

Ralph Delmdahl; Rainer Paetzel

ICALEO 2010; 1323-1329https://doi.org/10.2351/1.5061979

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical modeling of direct metal deposition: Heat transfer/solute transport of ternary system

Hyung Min Chae; Jyoti Mazumder

ICALEO 2010; 1330-1335https://doi.org/10.2351/1.5061980

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Femtosecond laser near-field ablation mediated with Mie resonance scattering by high dielectric constant particles with small size parameter

Yuto Tanaka; Go Obara; Akira Zenidaka; Minoru Obara

ICALEO 2010; 1336-1342https://doi.org/10.2351/1.5061981

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High efficiency gas assisted cutting (HEGAC) with Yb-fibre laser

Ali Khan; Martin Sparkes; Bill O’Neill; David Richardson

ICALEO 2010; 1343-1349https://doi.org/10.2351/1.5061982

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Focal plane considerations for fiber laser wide field processing

Mark Brodsky; Jack Gabzdyl

ICALEO 2010; 1350-1355https://doi.org/10.2351/1.5061983

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Ultra short laser pulse generation of anti-ice surfaces

Daniel Arnaldo Del Cerro; G. R. B. E. Römer; A. J. Huis in ‘t Veld

ICALEO 2010; 1356-1360https://doi.org/10.2351/1.5061984

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Versatile cutting and welding using beam optimised high brightness fiber lasers

Paul Harrison; Andy Appleyard

ICALEO 2010; 1361-1366https://doi.org/10.2351/1.5061985

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A modeling of UV laser drilled microhole profiles

Frank F. Wu

ICALEO 2010; 1367-1376https://doi.org/10.2351/1.5061986

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comparison of the modeling and experimental data of UV laser drilled microhole profiles in the first region

Frank F. Wu

ICALEO 2010; 1377-1385https://doi.org/10.2351/1.5061987

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Automatic real-time guidance of laser machining with inline coherent imaging

Paul J. L. Webster; Logan G. Wright; Kevin D. Mortimer; Ben Y. Leung; Joe X. Z. Yu; James M. Fraser

ICALEO 2010; 1386-1393https://doi.org/10.2351/1.5061989

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Color change in laser cutting of paper material

Alexander Stepanov; Heidi Piili; Antti Salminen

ICALEO 2010; 1394-1403https://doi.org/10.2351/1.5061990

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Correlation between computer-based simulation model and practice of high-speed laser welding of polycarbonate

Heidi Piili; Lauri Taimisto; Tuomas Purtonen; Saara Ruotsalainen; Petri Laakso; Antti Salminen

ICALEO 2010; 1404-1412https://doi.org/10.2351/1.5061992

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Photoconductive properties of titanium dioxide film by femtosecond laser irradiation

Teppei Nomura; Masahiro Tsukamoto; Masanari Takahashi; Masayuki Fujita; Nobuyuki Abe

ICALEO 2010; 1413-1416https://doi.org/10.2351/1.5061993

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

New nozzle for high power CO₂ laser welding with Argon as shielding gas

Karim Chouf; Philippe Lefebvre; Gaia Ballerini; Francis Briand

ICALEO 2010; 1417-1425https://doi.org/10.2351/1.5061994

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Real-time control of polarisation in high-aspect-ratio ultra-short-pulse laser micro-machining

O. J. Allegre; W. Perrie; K. Bauchert; G. Dearden; K. G. Watkins

ICALEO 2010; 1426-1433https://doi.org/10.2351/1.5061995

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Purchasing the ounce of prevention: Vital tools for today’s industrial laser users

John McCauley

ICALEO 2010; 1434-1438https://doi.org/10.2351/1.5061997

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Surface analysis system by VUV photons-stimulated desorption

Masahito Katto; Atushi Yokotani; Masanori Kaku; Shoichi Kubodera; Nobuyoshi Miyabayashi; Wataru Sasaki

ICALEO 2010; 1439-1443https://doi.org/10.2351/1.5061998

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-induced resonant vibrational excitations of precursor molecules in multi-energy processing for diamond synthesis

Z. Q. Xie; X. N. He; Y. Gao; Y. S. Zhou; J. B. Park; T. Guillemet; Y. F. Lu

ICALEO 2010; 1444-1449https://doi.org/10.2351/1.5061999

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Embedding arrays of microspheres with optical trapping for micro scale device manufacture

J. Croft; S. P. Edwardson; C. J. Williams; O. J. Allegre; G. Dearden; K. G. Watkins

ICALEO 2010; 1450https://doi.org/10.2351/1.5062000

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser microwelding of radioactive microcapsules made of high-alloyd steel

I. Avarvarei; O. Dontu; D. Besnea; I. Voiculescu; R. Ciobanu; I. Popescu

ICALEO 2010; 1451-1455https://doi.org/10.2351/1.5062001

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser keyhole welding of galvanized high-strength steel in a gap-free lap joint configuration

Shanglu Yang; Blair Carlson; Radovan Kovacevic

ICALEO 2010; 1456-1462https://doi.org/10.2351/1.5062002

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid 4kW fiber laser-GMAW welding of half-inch mild steel

Shanglu Yang; Rouzbeh Sarrafi; Radovan Kovacevic

ICALEO 2010; 1463-1468https://doi.org/10.2351/1.5062003

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Characteristics of LAMP joining structures for several materials

Yousuke Kawahito; Seiji Katayama

ICALEO 2010; 1469-1473https://doi.org/10.2351/1.5062004

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Picosecond laser fabrication of nitinol for coronary stent applications

N. Muhammad; D. Whitehead; F. Viejo; R. Abuaisha; A. Boor; W. Oppenlaendar; Z. Liu; L. Li

ICALEO 2010; 1474-1479https://doi.org/10.2351/1.5062005

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Application of air pomp in the laser drilling due to solve mud circulation problem in oil wells drilling industry

Mahdi Bakhtbidar; Mohsen Ghorbankhani; Siyamak Moradi

ICALEO 2010; 1480-1485https://doi.org/10.2351/1.5062006

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Variation of topography on the Ti-based bulk metallic glass after femtosecond laser irradiation

Togo Shinonaga; Masahiro Tsukamoto; Daisuke Tone; Sayaka Maruyama; Nobuhiro Matsushita; Takeshi Wada; Xinmin Wang; Hiroshi Honda; Shinji Motokoshi; Masayuki Fujita; Nobuyuki Abe

ICALEO 2010; 1486-1490https://doi.org/10.2351/1.5062007

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micro processing using a high repetition rate femto second laser

J. Schille; U. Loeschner; R. Ebert; P. Scully; N. Goddard; H. Exner

ICALEO 2010; 1491-1499https://doi.org/10.2351/1.5062008

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical investigation of the efffect of the pulse format on drilling performance

Joonghan Shin; Jyoti Mazumder

ICALEO 2010; 1500-1510https://doi.org/10.2351/1.5062010

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Thermal lensing compensation objective for high power lasers

Michael Scaggs; Gil Haas

ICALEO 2010; 1511-1517https://doi.org/10.2351/1.5062011

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser surface alloying of Mn-Ni-Al bronze for cavitation erosion resistance

C. T. Kwok; P. K. Wong; W. K. Chan; F. T. Cheng; H. C. Man

ICALEO 2010; 1518-1524https://doi.org/10.2351/1.5062012

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Welding with high brilliance lasers and high power density

Andreas Patschger; Markus Franz; Jens Bliedtner; Jean Pierre Bergmann

ICALEO 2010; 1525-1532https://doi.org/10.2351/1.5062013

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser direct deposition of carbon steel machining waste

Khalid Mahmood; Waheed UI Haq Syed; Andrew J. Pinkerton

ICALEO 2010; 1533-1540https://doi.org/10.2351/1.5062014

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Evaluation of optical sensors for laser welding in a technical cognitive environment

Lukas Lohaus; Thibault Bautze; Klaus Diepold

ICALEO 2010; 1541-1546https://doi.org/10.2351/1.5062015

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser parallel micro/nano patterning of hydrophobic surfaces in optical near fields

Ashfaq Khan; Zengbo Wang; Mohammad A. Sheikh; David J. Whitehead; Lin Li

ICALEO 2010; 1547-1551https://doi.org/10.2351/1.5062016

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hydrodynamic behavior induce laser dirlling on steel aluminum carbone and zirconia

Matthieu Schneider; Laurent Berthe

ICALEO 2010; 1552-1558https://doi.org/10.2351/1.5062017

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A study on laser cutting of textiles

Nukman Yusoff; Noor Azuan Abu Osman; Khairi Safwan Othman; Harizam Mohd Zin

ICALEO 2010; 1559-1566https://doi.org/10.2351/1.5062018

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text