Volumes | ICALEO | AIP Publishing

Skip to Main Content

Skip Nav Destination

ICALEO 2006: 25th International Congress on Laser Materials Processing and Laser Microfabrication

LASER MATERIALS PROCESSING CONFERENCE MANUSCRIPTS

Fundamentals of Laser Welding

Analysis of basic processes inside the keyhole during deep penetration Nd-YAG cw laser welding

Rémy Fabbro; Sonia Slimani; Frédéric Coste; Francis Briand; Bruno Dlubak; Guillaume Loisel

ICALEO 2006; 101https://doi.org/10.2351/1.5060748

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Holographic diffractive optical elements allow improvements in conduction laser welding of steels

James Kell; John Tyrer; Rebecca Higginson; Rachel Thomson; John Jones; Sara Noden

ICALEO 2006; 102https://doi.org/10.2351/1.5060749

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of welding parameters on keyhole behavior in CO₂-laser welding

Antti Salminen; Anna Fellman

ICALEO 2006; 103https://doi.org/10.2351/1.5060750

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of alloying elements on porosity formation in laser welding of heavy section steel plates

Susumu Tsukamoto; Goro Arakane; Kazuhiro Kojima; Tadayuki Otani; Shigeru Ohkita

ICALEO 2006; 104https://doi.org/10.2351/1.5060751

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Avoiding hot cracking by induction based change of thermal strains during laser welding

Gunther Göbel; Berndt Brenner

ICALEO 2006; 105https://doi.org/10.2351/1.5060752

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Which laser process for steel to aluminium joining?

Guillaume Sierra; Patrice Peyre; Frédéric Deschaux-Beaume; David Stuart; Cyril Bordreuil; Gilles Fras

ICALEO 2006; 106https://doi.org/10.2351/1.5060753

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser joining of steel-aluminum joints in T configuration

J. van Tienhoven; B. Pathiraj; J. Meijer

ICALEO 2006; 107https://doi.org/10.2351/1.5060754

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Experimental study of magnesium and aluminium alloys absorption and keyhole evolution during laser interaction Nd:YAG interaction

Nicolas Pierron; Pierre Sallamand; Simone Matteï

ICALEO 2006; P536https://doi.org/10.2351/1.5060944

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fibre coupled diode laser welding of lead alloy

Caroline Décombard; Olivier Amiot; Jacqueline Clémencelle; Christophe De Boyer D’Eguilles; Yvan Brunelliere

ICALEO 2006; P537https://doi.org/10.2351/1.5060945

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Cladding for Tooling & Moulds & Laser Assisted Deposition

Hard, wear resistant metal surfaces for industrial applications through laser powder deposition

James Sears; Aaron Costello; Jerrod Roalstad; Sudip Bhattacharya; Stanley Howard

ICALEO 2006; 201https://doi.org/10.2351/1.5060808

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser deposition of stainless and tool steel on a copper-beryllium alloy for plastic injection mould improvement

José Greses; Jesús M. Sampedro; Vicente Climent; José A. Ramos-de-Campos

ICALEO 2006; 202https://doi.org/10.2351/1.5060809

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Defining coating material for aluminum die casting molds using a laser cladding process

Jaby Mohammed; Suraj M. Alexander

ICALEO 2006; 203https://doi.org/10.2351/1.5060810

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advances in 3D laser processing in mold technology

Henrikki Pantsar; Reino Ruusu; Petri Laakso; Anssi Jansson

ICALEO 2006; 204https://doi.org/10.2351/1.5060811

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Repair of cemented carbide tools using laser cladding

Christ P. Paul; Hamidreza Alemohammad; Ehsan Toyserkani; Amir Khajepour; Stephen Corbin

ICALEO 2006; 205https://doi.org/10.2351/1.5060812

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of a laser assisted material spray process

Matthew Bray; Steven Celotto; William O’Neill

ICALEO 2006; 206https://doi.org/10.2351/1.5060813

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Processing in the Aerospace, Defence & Space Industries

Microstructure and mechanical properties of laser net shape manufactured inconel 718 and Ti-6Al-4V components

Yong Liu; Xiaoping Huang; Yanmin Li; Henry Peng; Huan Qi; Magdi Azer

ICALEO 2006; 301https://doi.org/10.2351/1.5060814

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology

Andrew J. Pinkerton; Richard Moat; Lin Li; Michael Preuss; Philip Withers

ICALEO 2006; 302https://doi.org/10.2351/1.5060815

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Results on laser direct manufacturing of graded materials

Patrice Peyre; Pascal Aubry; Chedly Braham; Rémy Fabbro

ICALEO 2006; 303https://doi.org/10.2351/1.5060816

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of porosity formation during laser welding of Ti6Al4V

Steffen Mueller; Eric Stiles; Ralph Dienemann

ICALEO 2006; 304https://doi.org/10.2351/1.5060817

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Repair opportunities for aerospace components through laser powder deposition

Aaron Costello; James Sears

ICALEO 2006; 305https://doi.org/10.2351/1.5060818

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Beneficial pre-stress in laser fabricated, metallic, square cellular sandwich panels

Stephen Copley; Peter Vigna; Eduard Ventsel

ICALEO 2006; 306https://doi.org/10.2351/1.5060819

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser percussion drilling of aerospace material using high peak power fiber delivered lamp-pumped pulsed Nd: YAG laser

Mohammed Naeem

ICALEO 2006; 308https://doi.org/10.2351/1.5060820

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Drilling routine for estimating, analyzing and modeling of laser processing

Tom Eppes; Ivana M. Milanovic; Devdas Shetty; Jason Bornas

ICALEO 2006; 309https://doi.org/10.2351/1.5060821

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Investigation into the influence of pulse shaping on drilling efficiency

P. W. French; M. Naeem; M. Sharp; K. G. Watkins

ICALEO 2006; 310https://doi.org/10.2351/1.5060822

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-processing of turbine components advances in part-programming strategies

John Stackhouse; David Suttie

ICALEO 2006; 311https://doi.org/10.2351/1.5060823

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Financing strategies used by small and mid-sized firms using laser manufacturing technology to supply the aerospace industry

Susan Coleman; Devdas Shetty; Tom Eppes

ICALEO 2006; P520https://doi.org/10.2351/1.5060932

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Cutting

An evaluation of the cutting potential of different types of high power lasers

Flemming Olsen

ICALEO 2006; 401https://doi.org/10.2351/1.5060824

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Inert cutting of medium section stainless steel using a 2.2kW high brightness fibre laser

Martin Sparkes; Markus Gross; Steven Celotto; Tao Zhang; William O’Neill

ICALEO 2006; 402https://doi.org/10.2351/1.5060825

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Melt flow in narrow thick section kerfs

Markus S. Gross; Steven Celotto; William O’Neill

ICALEO 2006; 403https://doi.org/10.2351/1.5060826

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cutting of stainless steel with fiber and disk laser

Catherine Wandera; Antti Salminen; Flemming O. Olsen; Veli Kujanpää

ICALEO 2006; 404https://doi.org/10.2351/1.5060827

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A new approach to 3D laser cutting

Jochen Deile; Greg LaManna; Michael Fritz; Axel Fischer

ICALEO 2006; 405https://doi.org/10.2351/1.5060828

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cutting of 2024-T3 aeronautic aluminium alloy

A. Riveiro; J. Pou; F. Lusquiños; M. Boutinguiza; F. Quintero; R. Soto; R. Comesaña; M. Pérez-Amor

ICALEO 2006; 406https://doi.org/10.2351/1.5060829

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Investigation of laser cutting quality of aluminium

Aristidis Stournaras; Panagiotis Stavropoulos; George Chryssolouris

ICALEO 2006; 407https://doi.org/10.2351/1.5060830

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cutting of variable thickness materials - Understanding the problem

M. Sobih; P. L. Crouse; L. Li

ICALEO 2006; 408https://doi.org/10.2351/1.5060831

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Multifunctional hand-held laser processing device

Christian Hennigs; Oliver Meier; Andreas Ostendorf; Heinz Haferkamp

ICALEO 2006; 410https://doi.org/10.2351/1.5060832

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cutting of mineral pigment coated papers

Heidi Malmberg; Antti Salminen; Veli Kujanpää

ICALEO 2006; P510https://doi.org/10.2351/1.5060924

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

On the fly cutting of silicon ribbon

Rob Janoch

ICALEO 2006; P533https://doi.org/10.2351/1.5060943

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cutting of natural stone slabs

A. Riveiro; M. Boutinguiza; R. Soto; F. Lusquiños; F. Quintero; J. Pou; M. Pérez-Amor

ICALEO 2006; P544https://doi.org/10.2351/1.5060948

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Processing in the Automotive Sector

Fault-tolerant laser welding in automotive industries

Michael Schmidt; Andreas Otto; Alexander Grimm; Christian Kägeler

ICALEO 2006; 501https://doi.org/10.2351/1.5060833

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of processing parameters on zero-gap laser welds made on multi-coated steel

Ashish Dasgupta; Jyoti Mazumder

ICALEO 2006; 502https://doi.org/10.2351/1.5060834

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Nd:YAG laser welding of AZ31 sheet for car industry

Mok-Young Lee; Woong-Seong Chang; Byung-Hyun Yoon

ICALEO 2006; 504https://doi.org/10.2351/1.5060835

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser roll welding of dissimilar metal joint of zinc coated steel and aluminum alloy

Hitoshi Ozaki; Muneharu Kutsuna

ICALEO 2006; 505https://doi.org/10.2351/1.5060836

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Induction assisted laser welding of advanced high strength steels to increase the formability of welded automotive body structures

Axel Jahn; Berndt Brenner; Eckhard Beyer

ICALEO 2006; 1701https://doi.org/10.2351/1.5060784

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser beam brazing of steel-aluminium tailored hybrid blanks

Lars Engelbrecht; Oliver Meier; Andreas Ostendorf; Heinz Haferkamp

ICALEO 2006; 1702https://doi.org/10.2351/1.5060785

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

An experimental investigation of remote welding with CO₂ and Nd:YAG laser-based systems

George Tsoukantas; Aristidis Stournaras; George Chryssolouris

ICALEO 2006; 1704https://doi.org/10.2351/1.5060786

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of the laser spot welded stainless steel panel for vehicle body

Masashi Oikawa; Katsuhiro Minamida; Hiroyuki Kumehara

ICALEO 2006; 1706https://doi.org/10.2351/1.5060787

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Set of a high power diode laser in order to enhance wettability conditions and process speed in a controlled short arc brazing process of zinc coated steels

Johannes Wilden; Jean Pierre Bergmann; Sebastian Reich; Lars Möller; Sven-Frithjof Goecke

ICALEO 2006; 1708https://doi.org/10.2351/1.5060788

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser brazing phenomena of galvanized steel and pit formation mechanism

Seita Kimura; Shinsuke Takemura; Masami Mizutani; Seiji Katayama

ICALEO 2006; P528https://doi.org/10.2351/1.5060939

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Welding of Polymers & Plastics

Through-transmission welding of polymers: Effects of particles on laser beam scattering

Mariana Ilie; Jean-Cristophe Kneip; Simone Mattei; Alexandru Nichici

ICALEO 2006; 601https://doi.org/10.2351/1.5060837

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimizing weld joint design for bond strength and functional properties in laser welding of polymers

R. E. Mueller; H. Gu

ICALEO 2006; 602https://doi.org/10.2351/1.5060838

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A novel CO₂ laser welding of plastics using a transparent solid heat sink without causing thermal damage

Yasuo Kurosaki; Tomoya Matayoshi; Kimitoshi Sato

ICALEO 2006; 603https://doi.org/10.2351/1.5060839

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of direct laser joining for metal and plastic

Yousuke Kawahito; Akio Tange; Shyuji Kubota; Seiji Katayama

ICALEO 2006; 604https://doi.org/10.2351/1.5060840

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fiber laser pick-and-join tool for welding of thermoplastics

Andrei Boglea; Luedger Bosse; Alexander Olowinsky; Silvia Bou

ICALEO 2006; 605https://doi.org/10.2351/1.5060841

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The use of overlapping Nd:YAG laser spot welds to butt weld steelite, a metal polymer laminate

H. L. Gower; R. R. G. M. Pieters; I. M. Richardson

ICALEO 2006; P519https://doi.org/10.2351/1.5060931

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Process Monitoring & Control

Applicable sensor for a multivariate process controller

Simon Dietrich; Andreas Otto

ICALEO 2006; 701https://doi.org/10.2351/1.5060842

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optics evalutation for multikilowatt solid state and fiber lasers

Reinhard Kramer; Harald Schwede; Volker Brandl; Stefan Wolf; Otto Märten

ICALEO 2006; 702https://doi.org/10.2351/1.5060843

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Improving the analysis of laser welding process by the reassigned time-frequency representations

Giuseppe D’Angelo; Giorgio Pasquettaz; Andrea Terreno

ICALEO 2006; 703https://doi.org/10.2351/1.5060844

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advanced process control in laser materials processing – Advantages in combining various sensor technologies

Markus Kogel-Hollacher; Jürgen Müller-Borhanian; Christoph Dietz; Thomas Nicolay; Axel Kattwinkel

ICALEO 2006; 704https://doi.org/10.2351/1.5060845

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Using machine vision for observation of phenomena during laser hybrid welding

Anna Fellman; Henri Fennander; Antti Salminen; Ville Kyrki

ICALEO 2006; 705https://doi.org/10.2351/1.5060846

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Self guided laser welding

Boris Regaard; Stefan Kaierle; Reinhart Poprawe

ICALEO 2006; 706https://doi.org/10.2351/1.5060847

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A novel non-intrusive technique for CO₂ laser on-line beam monitoring

Martin Sparkes; Markus Gross; William O’Neill

ICALEO 2006; 1401https://doi.org/10.2351/1.5060766

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optical inspection of laser drilled cooling holes in jet engine blades

Devdas Shetty; Tom Eppes; Nikolay Nazaryan; Claudio Campana; Jun Kondo

ICALEO 2006; 1402https://doi.org/10.2351/1.5060767

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Sensing and experimental based modeling of direct metal deposition

Lijun Song; Jyoti Mazumder

ICALEO 2006; 1403https://doi.org/10.2351/1.5060768

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Camera based feedback control of the laser cladding process

J. T. Hofman; D. F. de Lange; J. Meijer

ICALEO 2006; 1404https://doi.org/10.2351/1.5060769

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

In situ evaluation of metallic coatings via laser plasma spectroscopy

Pamela Benicewicz; Pingfan Wu; Pavel Fomitchov; Bhupendra Gupta; Elena Rozier; John Viertl; Tymm Schumaker

ICALEO 2006; 1405https://doi.org/10.2351/1.5060770

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of parameter changes in CO₂ laser welding on spectra

Anna Fellman; Ville Heikkinen; Antti Salminen; Jouni Hiltunen; Birgitta Martinkauppi; Markku Hauta-Kasari

ICALEO 2006; P502https://doi.org/10.2351/1.5060918

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modelling of Laser Processes

Experimental verification of multi-physical modelling of the keyhole laser welding process

B. J. Aalderink; D. F. de Lange; R. G. K. M. Aarts; J. Meijer

ICALEO 2006; 801https://doi.org/10.2351/1.5060848

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Interaction between laser beam, process effects and structural properties during welding using models based on the FEA

Loucas Papadakis; Tobias Hornfeck; Michael F. Zaeh

ICALEO 2006; 802https://doi.org/10.2351/1.5060849

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Three-dimensional finite element models for the calculation of temperature and residual stress fields in laser cladding

Augusto M. Deus; Jyoti Mazumder

ICALEO 2006; 803https://doi.org/10.2351/1.5060850

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

An analytical model of the combined powder-wire deposition process

Andrew J. Pinkerton; Waheed Ul Haq Syed; Lin Li

ICALEO 2006; 804https://doi.org/10.2351/1.5060851

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Experimental and computational investigation of fusion zone geometries during autogenous keyhole mode laser welds

R. Rai; S. M. Kelly; R. P. Martukanitz; T. DebRoy

ICALEO 2006; 805https://doi.org/10.2351/1.5060852

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Theoretical and experimental investigation of pulsed laser grooving process

Aristidis Stournaras; Panagiotis Staropoulos; George Chryssolouris

ICALEO 2006; 806https://doi.org/10.2351/1.5060853

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fibre Laser Processing

Phenomena of welding with high-power fiber laser

Keisuke Kinoshita; Masami Mizutani; Yousuke Kawahito; Seiji Katayama

ICALEO 2006; 902https://doi.org/10.2351/1.5060854

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Humping in welding with single-mode fiber lasers

Claus Thomy; Thomas Seefeld; Florian Wagner; Frank Vollertsen

ICALEO 2006; 903https://doi.org/10.2351/1.5060855

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The role of strong focusability on the welding process

Jan Weberpals; Friedrich Dausinger; Gunther Göbel; Berndt Brenner

ICALEO 2006; 905https://doi.org/10.2351/1.5060856

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fiber laser welding of 780MPa high strength steel

Zhongjie Liu; Muneharu Kutsuna; Guojian Xu

ICALEO 2006; 1101https://doi.org/10.2351/1.5060755

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimization of parameters for effective welding of aerospace components

Adil Widaatalla; Devdas Shetty; Tom Eppes

ICALEO 2006; 1104https://doi.org/10.2351/1.5060756

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Applications review: Materials processing with fiber lasers under 1kW

Vijay Kancharla

ICALEO 2006; 1301https://doi.org/10.2351/1.5060762

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-speed fiber laser welding for fuel cell components

Stanley Ream

ICALEO 2006; 1302https://doi.org/10.2351/1.5060763

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Integration of a flexible, pulsed high power single transverse mode Yb-doped fiber laser system

Tim Lauterborn; Stefan Heinemann; Almantas Galvanauskas

ICALEO 2006; 1304https://doi.org/10.2351/1.5060764

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High average power, low non-linearity Ytterbium fiber amplifier using spectral compression

Yoann Zaouter; Eric Cormier; Pierre Rigail; Clemens Hönninger; Eric Mottay

ICALEO 2006; 1305https://doi.org/10.2351/1.5060765

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Cladding

Laser cladding of Cu-NbC nanocomposite coatings

Amélia Almeida; Sónia Eugénio; Vanessa Livramento; Maria Teresa Marques; José Brito Correia; Rui Vilar

ICALEO 2006; 1001https://doi.org/10.2351/1.5060743

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cladding of multiple track composite NiCrBSi coatings

M. J. Tobar; J. M. Amado; J. C. Alvarez; A. Yañez

ICALEO 2006; 1002https://doi.org/10.2351/1.5060744

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cladding in practice of valuable products; the experience of a laser cladding job shop

Wim Husslage

ICALEO 2006; 1003https://doi.org/10.2351/1.5060745

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Improving laser cladding process conditions by inducing skin effect through high frequency magnetic field

Johannes Wilden; Jean-Pierre Bergmann; Markus Dolles

ICALEO 2006; 1005https://doi.org/10.2351/1.5060746

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comparison of laser cladding with powder and hot and cold wire techniques

Janne Nurminen; Jouko Riihimäki; Jonne Näkki; Petri Vuoristo

ICALEO 2006; 1006https://doi.org/10.2351/1.5060747

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Crack behavior and characteristics of laser clad layer with powder mixture of C_O-based alloy and WC

Guojian Xu; Munaharu Kutsuna; Zhongjie Liu; Leiquan Sun

ICALEO 2006; P509https://doi.org/10.2351/1.5060923

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of laser cladding repair system for damaged alloy 600 heat exchanger tubes

Won-Jin Han; Woo-Sung Kim; Seon-Ho Lee

ICALEO 2006; P522https://doi.org/10.2351/1.5060933

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct Metal Deposition

Mechanical performance of laser deposition repairing of in 738 on directionally solidified superalloy blade

Xiaofeng Zhu; Minlin Zhong; Wenjin Liu; Jinjiang He; Hongjun Zhang

ICALEO 2006; 1202https://doi.org/10.2351/1.5060757

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct manufacturing of aeronautical components by laser metal deposition of Ti-6Ai-4V

Julie Maisonneuve; Christophe Colin; Yves Bienvenu; Pascal Aubry

ICALEO 2006; 1203https://doi.org/10.2351/1.5060758

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Absorption coefficient characterization in Ti-6Al-4V laser additive manufacturing

M. Keller; A. Chaudhary; S. Kelly; S. Medieros

ICALEO 2006; 1204https://doi.org/10.2351/1.5060759

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Qualification of Nd:YAG laser direct metal deposition techniques for repair of nickel superalloy components

A. A. Lugan; P. A. Hilton; G. B. Melton; C. Rinaldi

ICALEO 2006; 1205https://doi.org/10.2351/1.5060760

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser consolidation of net-shape shells for flextensional sonar projectors

Lijue Xue; Chris Purcell

ICALEO 2006; 1206https://doi.org/10.2351/1.5060761

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Lasers in Bio-Medicine

Microstructure and mechanical properties of laser–deposited Ti–6Al–4V scaffold

Guru Prasad Dinda; Jyoti Mazumder; Lijun Song

ICALEO 2006; 1501https://doi.org/10.2351/1.5060771

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Production of biofibers by laser spinning

F. Quintero; J. Pou; F. Lusquiños; A. Riveiro; A. B. Mann

ICALEO 2006; 1503https://doi.org/10.2351/1.5060772

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Plasma spray hydroxyapatite coating on laser surface nitrided Ti6Al4V alloy

H. C. Man; Sen Yang; Xuebin Zheng

ICALEO 2006; 1504https://doi.org/10.2351/1.5060773

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-induced wettability characteristics modification and the effect thereof on cell response on a titanium alloy

J. Lawrence; L. Hao

ICALEO 2006; 1505https://doi.org/10.2351/1.5060774

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

CO₂ laser irradiation of a magnesia partially stabilized zirconia (MGO-PSZ) bioceramic and the subsequent improvements in human osteoblast cell adhesion

L. Hao; J. Lawrence

ICALEO 2006; 1506https://doi.org/10.2351/1.5060775

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

3-D biomimetic micro-channel network by laser direct writing

Dong Hyuck Kam; Jyoti Mazumder

ICALEO 2006; 1508https://doi.org/10.2351/1.5060776

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser surface modification of NiTi with Mo and Zr

K. W. Ng; H. C. Man; T. M. Yue

ICALEO 2006; P540https://doi.org/10.2351/1.5060947

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cladding from marine wastes for biomedical applications

F. Lusquiños; R. Comesaña; A. Riveiro; F. Quintero; J. Pou

ICALEO 2006; P545https://doi.org/10.2351/1.5060949

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Surface Treatment

Optimisation of production rate in diode laser hardening

Edoardo Capello; Moreno Castelnuovo; Barbara Previtali

ICALEO 2006; 1601https://doi.org/10.2351/1.5060777

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Dual function laser surface treatment improves die casting die life

Zhiyue Xu; Claude B. Reed

ICALEO 2006; 1602https://doi.org/10.2351/1.5060778

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Experimental analysis of laser stripping effects on thin composites

E. W. Reutzel; K. Knock; M. R. Wool; K. C. Meinert

ICALEO 2006; 1603https://doi.org/10.2351/1.5060779

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Integrated heat treatment – Comparison of different machine concepts

Steffen Bonss; Jan Hannweber; Udo Karsunke; Marko Seifert; Berndt Brenner; Eckhard Beyer

ICALEO 2006; 1604https://doi.org/10.2351/1.5060780

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Empirical modelling of laser texturing of 304L stainless steel

A. Soveja; E. Cicală; G. Duffet; B. Martin; D. Grevey; J. M. Jouvard

ICALEO 2006; 1605https://doi.org/10.2351/1.5060781

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Surface layer modification of AlSi6Cu4 aluminium alloy via CO₂ laser treatment

K. Bartkowiak; J. Borowski; A. Wołyński; L. Foltynowicz

ICALEO 2006; 1606https://doi.org/10.2351/1.5060782

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of the surface morphology and mechanical properties of yttria-stabilized zirconia (YSZ) thin films fabricated by pulsed laser deposition

Joonghan Shin; Peng Li; J. Mazumder

ICALEO 2006; 1608https://doi.org/10.2351/1.5060783

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser bending of thin metal plate: Effects of two beams and single line beam on bending characteristics based on buckling mode

Toshiyuki Miyazaki; Tadashi Misu; Osamu Yamazaki; Masanobu Nagahama; Shunro Yoshioka; Tsuyoshi Tokunaga; Yoshihiro Tanaka

ICALEO 2006; P501https://doi.org/10.2351/1.5060917

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser peening systems for preventive maintenance against stress corrosion cracking in nuclear power reactors

Takuya Uehara; Naruhiko Mukai; Yuji Sano; Masaki Yoda; Itaru Chida; Hiromi Kato; Tetsuo Yamamoto

ICALEO 2006; P503https://doi.org/10.2351/1.5060919

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Correction of distortion and design shape in aluminium structures using laser forming

G. Dearden; S. P. Edwardson; E. Abed; K. Bartkowiak; K. G. Watkins

ICALEO 2006; P505https://doi.org/10.2351/1.5060920

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

An analysis of crack and porosity formation in laser surface treated magnesia partially stabilized zirconia (MgO-PSZ) and methods for alleviation

J. Lawrence; D. W. Evans; J. Kell; J. R. Tyrer

ICALEO 2006; P506https://doi.org/10.2351/1.5060921

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Precision adjustment of spring contacts using laser forming

D. O. MacCallum; G. A. Knorovsky; J. A. Palmer; J. D. Arvizu

ICALEO 2006; P507https://doi.org/10.2351/1.5060922

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mechanism of anisotropic stress generation in laser peening process

Koji Hirano; Atsushi Sugihashi; Hirofumi Imai; Naoya Hamada

ICALEO 2006; P511https://doi.org/10.2351/1.5060925

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Spring-back control in laser assisted mechanical forming of dual phase steels

Pablo M. Romero; Germán J. Rodríguez; Jorge L. Arias; Joaquín Vázquez

ICALEO 2006; P513https://doi.org/10.2351/1.5060926

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effects of laser forming on superelastic NiTi shape memory alloys

Andrew J. Birnbaum; Y. Lawrence Yao

ICALEO 2006; P529https://doi.org/10.2351/1.5060940

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The influence of the cooling rate on structure of laser boronizing layer on nodular iron

Marta Paczkowska; Włodzimierz Waligóra

ICALEO 2006; P549https://doi.org/10.2351/1.5060950

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Rapid Prototyping, Sintering & Powder Bed Technology

Development of laser-based techniques for rapid prototyping of printed wiring boards

Nicholas Dellas; Brock Golesich; Kenneth Meinert; Suzanne Mohney

ICALEO 2006; 1801https://doi.org/10.2351/1.5060789

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of the process of rapid prototyping with laser beam

V. Kovalenko; M. Anyakin; P. Kondrashov; A. Mukhoid; A. Stepura; R. Zhuk

ICALEO 2006; 1802https://doi.org/10.2351/1.5060790

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Analysis of the laser sintering process for direct manufacturing of mould

Nadine Coulon; Yorris Lafaye; Pascal Aubry

ICALEO 2006; 1803https://doi.org/10.2351/1.5060791

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Parametric analysis of selective laser melting technology

I. Yadroitsev; Ph. Bertrand; I. Smurov

ICALEO 2006; 1805https://doi.org/10.2351/1.5060792

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A study on the selective dual laser sintering process for the solid freeform fabrication system

Dong Soo Kim; Young Jin Ahn; Sung Woo Bae; Byung Oh Choi; Kyung Hyun Choi

ICALEO 2006; 1806https://doi.org/10.2351/1.5060793

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of polyamide-6 powders and its effect on the fabrication by selective laser sintering

Dong Soo Kim; Young Jin Ahn; Sung Woo Bae; Chung-Hwan Kim; Hyung-Il Kim

ICALEO 2006; 1807https://doi.org/10.2351/1.5060794

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Three - dimensional prototyping from metallic powder: Melting by cw/pulsed Nd:YAG laser with electric heater

Teruyuki Hayashi; Toshiyuki Miyazaki; Tsuyoshi Tokunaga; Yota Mizukami

ICALEO 2006; P515https://doi.org/10.2351/1.5060928

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Research on sintering parameters and prototyping quality of SLS polymer powders

Pengcheng Wang; Xiaocheng Li; Junjie Xiao; Fushun Zhu; Yan Yang

ICALEO 2006; P517https://doi.org/10.2351/1.5060930

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Research on application of DSPC via SLS

Pengcheng Wang; Junjie Xiao; Xiaocheng Li; Fushun Zhu; Xiaonan Wang

ICALEO 2006; P524https://doi.org/10.2351/1.5060935

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Application of SLS technique in manufacturing alkaili-corrosive resisting valve pieces

Pengcheng Wang; Fushun Zhu; Junjie Xiao; Xiaocheng Li; Xiehan Chen

ICALEO 2006; P525https://doi.org/10.2351/1.5060936

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid Laser Welding

Dynamic behaviour of CO₂ laser GMA hybrid welding

Claus Thomy; Frank Vollertsen

ICALEO 2006; 1901https://doi.org/10.2351/1.5060795

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Gap tolerant joining of aluminum with steel sheets using the hybrid technique

Michael Kreimeyer; Frank Vollertsen

ICALEO 2006; 1902https://doi.org/10.2351/1.5060796

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Production of sound deep-penetration hybrid weld in aluminum alloy with YAG laser and MIG arc

Seiji Katayama; Satoru Uchiumi; Francis Briand

ICALEO 2006; 1903https://doi.org/10.2351/1.5060797

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Observation of the phenomena of CO₂ laser-mag hybrid welding

Anna Fellman; Antti Salminen

ICALEO 2006; 1904https://doi.org/10.2351/1.5060798

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid laser welding and friction stir welding applied to 6056 aluminium alloy

Jo Verwimp; Jan Gedopt; Eric Geerinckx; Wim Van Haver

ICALEO 2006; 1905https://doi.org/10.2351/1.5060799

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Continued experimental analysis of practical aspects of hybrid welding of thick sections

E. W. Reutzel; L. A. Kern; J. F. Tressler

ICALEO 2006; 1906https://doi.org/10.2351/1.5060800

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Failure criteria for laser and hybrid welded sandwich panels

Kenneth C. Meinert, Jr.; Richard P. Martukanitz; Donald A. Koss

ICALEO 2006; 1907https://doi.org/10.2351/1.5060801

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modelling of Powder Deposition Processes

Development of new material systems for direct laser freeform fabrication

Maren Petersen; Claus Emmelmann

ICALEO 2006; 2002https://doi.org/10.2351/1.5060802

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fully coupled temperature-stress finite element analysis for thermal stresses in laser aided dmd process

Suhash Ghosh; Joohyun Choi

ICALEO 2006; 2003https://doi.org/10.2351/1.5060803

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Real-time prediction of dilution for automated laser powder deposition process

Alireza Fathi; Ehsan Toyserkani; Amir Khajepour

ICALEO 2006; 2004https://doi.org/10.2351/1.5060804

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Finite element analysis of laser powder deposition of titanium

Antonio Crespo; Augusto Deus; Rui Vilar

ICALEO 2006; 2005https://doi.org/10.2351/1.5060805

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modeling of geometry and temperature during direct metal deposition

Xiuli He; Jyoti Mazumder

ICALEO 2006; 2006https://doi.org/10.2351/1.5060806

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

On the 3D modeling of geometrical formation in laser solid freeform fabrication process

Masoud Alimardani; Ehsan Toyserkani

ICALEO 2006; 2007https://doi.org/10.2351/1.5060807

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fabrication of Fe-based bulk metallic glass components using laser additive manufacturing

S. M. Kelly

ICALEO 2006; P539https://doi.org/10.2351/1.5060946

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LASER MICROPROCESSING CONFERENCE MANUSCRIPTS

Laser Micromachining

High repetition rate ps- and fs-lasers for micromachining

Gediminas Raciukaitis; Mikhail Grishin; Romas Danielius; Jonas Pocius; Linas Giniunas

ICALEO 2006; M1001https://doi.org/10.2351/1.5060857

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of laser wavelength on machining characteristics of aluminum nitride in micro-boring

Norio Kataoka; Yasuhiro Okamoto; Yoshiyuki Uno; Itaru Tanino

ICALEO 2006; M1002https://doi.org/10.2351/1.5060858

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Improved picosecond laser radiation for micromachining

Thomas Herrmann; Hatim Haloui; Ralf Knappe; Bernhard Henrich; Achim Nebel

ICALEO 2006; M1003https://doi.org/10.2351/1.5060859

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Machinability of laser heated silicon nitride ceramics during a turning process

M. Jankowiak; K. Bartkowiak

ICALEO 2006; M1005https://doi.org/10.2351/1.5060860

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Femtosecond laser machining of dielectric materials for biomedical applications

Hae Woon Choi; Burr Zimmerman; Jeremey Steach; Dave F. Farson; Jeffery J. Chalmers; Susan V. Olesik

ICALEO 2006; M1006https://doi.org/10.2351/1.5060861

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser engraving reflective metals to create scanner readable barcodes

Paul M. Harrison; Jozef Wendland; Matthew Henry

ICALEO 2006; P516https://doi.org/10.2351/1.5060929

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A system for the removal of debris produced during laser micromachining

C. F. Dowding; J. Lawrence

ICALEO 2006; P523https://doi.org/10.2351/1.5060934

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Drilling strategies for metals with pulsed YAG lasers

Rene Liebers; Ulrich Dürr; Lena Trippe; Wolfgang Schultz

ICALEO 2006; P530https://doi.org/10.2351/1.5060941

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser drilling of pet-backed unfired ceramic

Leonard Migliore

ICALEO 2006; P532https://doi.org/10.2351/1.5060942

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Microprocessing

A microfluidic bioarray system using laser-machined surface microstructures

Tadatake Sato; Tomas Gumpenberger; Ryozo Kurosaki; Aiko Narazaki; Yoshizo Kawaguchi; Hiroyuki Niino

ICALEO 2006; M101https://doi.org/10.2351/1.5060862

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fabrication, characterization and simulation of noval 3-D photonic bandgap structures using laser chemical vapor deposition

H. Wang; Y. F. Lu; Z. Y. Yang

ICALEO 2006; M102https://doi.org/10.2351/1.5060863

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microstructures and mechanical properties of laminated structural Nb-Ti-Al composites fabricated by laser deposition

Jinjiang He; Minlin Zhong; Wenjin Liu; Hongjun Zhang

ICALEO 2006; M103https://doi.org/10.2351/1.5060864

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-assisted combustion-flame synthesis of diamond films

Y. X. Han; H. Ling; Y. F. Lu

ICALEO 2006; M104https://doi.org/10.2351/1.5060865

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Analysis of modified layer formation into silicon wafer by permeable nanosecond laser

Etsuji Ohmura; Kenshi Fukumitsu; Naoki Uchiyama; Kazuhiro Atsumi; Masayoshi Kumagai; Hideki Morita

ICALEO 2006; M105https://doi.org/10.2351/1.5060868

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimisation of TiN thin film synthesis by a novel combined laser/sol-gel processing technique

Tamer Ezz; Philip Crouse; Lin Li; Zhu Liu

ICALEO 2006; M106https://doi.org/10.2351/1.5060870

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Industrial applications of laser micro/nano material processing

Wenwu Zhang; Magdi Azer; Pamela Benicewicz; Marshall Jones; Long Que

ICALEO 2006; M401https://doi.org/10.2351/1.5060890

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Compact QCW laser arrays for use in demanding environments

R. N. Pathak; C. Cao; J. Helmrich; B. Caliva; F. Lapinski; P. Thiagarajan; R. Walker; M. McElhinney

ICALEO 2006; M402https://doi.org/10.2351/1.5060891

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser drilling of single crystal silicon carbide substrates

Chong Zhang; Nathaniel R. Quick; Aravinda Kar

ICALEO 2006; M403https://doi.org/10.2351/1.5060892

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Corrosion behavior of laser-oxidized NiTi in hanks’ solution

M. H. Wong; F. T. Cheng; H. C. Man

ICALEO 2006; M404https://doi.org/10.2351/1.5060893

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

KrF excimer laser processing of human dental hard tissues

M. Sivakumar; V. Oliveira; S. Eugénio; R. Vilar

ICALEO 2006; M405https://doi.org/10.2351/1.5060894

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-assisted micro-forming with laser strucutred sapphire dies

Katja Samm; Mahdi Terzi; Andreas Ostendorf; Jens Wulfsberg

ICALEO 2006; M601https://doi.org/10.2351/1.5060898

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of laser forming of thin section materials using rapid scanning optics for macro-applications

K. Bartkowiak

ICALEO 2006; M602https://doi.org/10.2351/1.5060899

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comparative study of symmetric and asymmetric deformation of Al single crystal under micro scale laser shock peening

Sinisa Vukelic; Youneng Wang; Jeffrey W. Kysar; Y. Lawrence Yao

ICALEO 2006; M604https://doi.org/10.2351/1.5060900

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Waterjet as a multimode waveguide-theoretical and experimental investigation of modal noise and beam propagation in material processing with lasermicrojet

Joseph Battaglia; Tuan Anh Mai; Delphine Perrottet; Bernold Richerzhagen

ICALEO 2006; M605https://doi.org/10.2351/1.5060901

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser fabrication of silicon carbide light emitting diodes

Sachin Bet; Nathaniel Quick; Aravinda Kar

ICALEO 2006; M606https://doi.org/10.2351/1.5060902

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The role of fiber lasers in generative manufacturing

John Tinson

ICALEO 2006; M607https://doi.org/10.2351/1.5060903

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mechanism and prediction of laser wet cleaning of marble encrustation

Jie Zhang; Andrew J. Birnbaum; Y. Lawrence Yao; Fen Xu; John R. Lombard

ICALEO 2006; P514https://doi.org/10.2351/1.5060927

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical modeling for embedding of fiber Bragg grating sensors within metallic structures using laser solid freeform fabrication

Hamidreza Alemohammad; Ehsan Toyserkani

ICALEO 2006; P526https://doi.org/10.2351/1.5060937

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Lasers in Nanotechnology

Nanostructuring in Si using a femtosecond laser

Ming Li

ICALEO 2006; M1101https://doi.org/10.2351/1.5060871

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Sintering nano-particles on low temperature materials

Michael Carter; Jacob Colvin; James Sears

ICALEO 2006; M1102https://doi.org/10.2351/1.5060872

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct laser pyrolysis of nanostructured micro components

Johannes Wilden; Jean Pierre Bergmann; Sebastian Schlichting; Markus Dolles

ICALEO 2006; M1103https://doi.org/10.2351/1.5060873

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Raman mapping of single-wall carbon nanotubes at nanoscales with micro-Raman

K. J. Yi; Y. F. Lu; J. Shi

ICALEO 2006; M1104https://doi.org/10.2351/1.5060874

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Connection of macro-sized double-walled carbon nanotube strands by current-assisted laser irradiation

Tao Gong; Yong Zhang; Wenjin Liu; Jinquan Wei; Kunlin Wang; Dehai Wu; Minlin Zhong

ICALEO 2006; M1105https://doi.org/10.2351/1.5060875

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Aligned synthesis of carbon nanotubes by laser-assisted chemical vapor deposition

J. Shi; Y. S. Zhou; Y. F. Lu; K. J. Yi

ICALEO 2006; M1106https://doi.org/10.2351/1.5060876

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Light emission characterization from multiwalled carbon nanotubes under CO₂ laser irradiation

Yong Zhang; Tao Gong; Wenjin Liu; Minlin Zhong; Dehai Wu

ICALEO 2006; M1107https://doi.org/10.2351/1.5060877

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Lasers in Diagnostics

Study of magnetic confinement in laser-induced plasmas by optical emission spectroscopy and fast photography

X. K. Shen; Y. F. Lu; T. Gebre

ICALEO 2006; M1202https://doi.org/10.2351/1.5060878

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of hole properties in percussion regime with a new analysis method

M. Schneider; M. Muller; R. Fabbro; L. Berthe

ICALEO 2006; M1203https://doi.org/10.2351/1.5060879

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The transition from qualitative plexiglas burn-ins to quantitative electronic data acquisition for beam diagnostics (evaluation, benchmark)

Reinhard Kramer; Otto Märten; Harald Schwede; Stefan Wolf; Volker Brandl

ICALEO 2006; P527https://doi.org/10.2351/1.5060938

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Ultrafast Laser Processing

3D-laser nanofabrication: Diffractive holography versus femtosecond direct writing

Peter R. Herman; Debashis Chanda; Ladan Abolghasemi

ICALEO 2006; M201https://doi.org/10.2351/1.5060880

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of the repetition rate on self organized surface structuring during femtosecond pulsed laser ablation

Max Groenendijk; Johan Meijer

ICALEO 2006; M202https://doi.org/10.2351/1.5060881

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Femtosecond laser structuring of PCL and PET electrospun nanofiber mesh

Hae Woon Choi; Jed Johnson; Dave F. Farson; John Lannutti

ICALEO 2006; M203https://doi.org/10.2351/1.5060882

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High energy diode-pumped femtosecond oscillator with 1 µJ pulse energy at 9 MHz pulse repetition rate

Clemens Hönninger; Eric Mottay

ICALEO 2006; M204https://doi.org/10.2351/1.5060883

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microstructures on metal plate produced with femtosecond laser

Masahiro Tsukamoto; Keita Asuka; Hitoshi Nakano; Yuichi Komizo; Toshiya Shibayanagi; Masayuki Fujita; Masaki Hashida; Masahito Katto; Nobuyuki Abe

ICALEO 2006; M205https://doi.org/10.2351/1.5060884

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

1 mJ, multi-kHz, sub-500 fs diode-pumped Ytterbium laser amplifier

Clemens Hönninger; Antoine Courjaud; Eric Mottay; Martin Delaigue; Inka Manek-Hönninger

ICALEO 2006; M206https://doi.org/10.2351/1.5060885

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modeling of ultrafast laser ablation into vacuum

Mark Squires; Cho Lik Chan

ICALEO 2006; M302https://doi.org/10.2351/1.5060886

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Picosecond laser material processing - Prospects and limitations

Ulrich Klug; Beatrix Kamlage-Rahn; Jürgen Koch; Ralf Knappe; Uwe Stute; Boris Chichkov

ICALEO 2006; M303https://doi.org/10.2351/1.5060887

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Patterning of ITO on glass with picosecond lasers for oleds

Gediminas Raciukaitis; Marijus Brikas; Mindaugas Gedvilas; Gediminas Darcianovas

ICALEO 2006; M304https://doi.org/10.2351/1.5060888

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Post processing of EDM-machined microstructures by ultra short pulsed laser ablation

Sebastian Haupt; Jürgen Schmidt; Jürgen Fleischer

ICALEO 2006; M305https://doi.org/10.2351/1.5060889

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Micropackaging

Development of DPSS-laser-based ito patterning system for large-scale FPD’s

Naoaki Fukuda

ICALEO 2006; M502https://doi.org/10.2351/1.5060895

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Nanoscale analysis of laser ablated thin films used in industrial manufacturing of flat panel displays

Matt Henry; Jozef Wendland; Paul M. Harrison

ICALEO 2006; M503https://doi.org/10.2351/1.5060896

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A laser selective etching process for next-generation flexible display

K. R. Kim; K. Y. Baek; J. W. Kim; S. C. Oh; C. H Cho; H. S. Kang; S. K. Hong; Y. W. Choi; S. S. Yoon; J. H. Son

ICALEO 2006; M504https://doi.org/10.2351/1.5060897

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Recent advances in laser micromachining for semiconductor and microfluidic applications

Robert F. Hainsey; Andrew E. Hooper; Edward J. Swenson; Michael S. Nashner

ICALEO 2006; M701https://doi.org/10.2351/1.5060904

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advanced fiber laser marking on very small IC packages and microprocessing of very thin films

R. Bhandari; T. Kamiya

ICALEO 2006; M702https://doi.org/10.2351/1.5060905

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser processing for back-contacted silicon solar cells

P. Engelhart; R. Grischke; S. Eidelloth; R. Meyer; A. Schoonderbeek; U. Stute; A. Ostendorf; R. Brendel

ICALEO 2006; M703https://doi.org/10.2351/1.5060906

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser technology for cost reduction in silicon solar cell production

Aart Schoonderbeek; Uwe Stute; Andreas Ostendorf; Rainer Grischke; Peter Engelhart; Rüdiger Meyer; Rolf Brendel

ICALEO 2006; M704https://doi.org/10.2351/1.5060907

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advances in laser singulation of silicon

Leonard Migliore; Kang-Soo Lee; Kim Jeong-Moog; Choi Byung-Kew

ICALEO 2006; M902https://doi.org/10.2351/1.5060914

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

To advent of portable MEMS devices in spectroscopy applications

Mouli Ramani

ICALEO 2006; M904https://doi.org/10.2351/1.5060915

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Synova has re-invented the laser: No heat damage, no beam divergence, no cutting gas, no deposition

Joseph Battaglia; Delphine Perrottet; Roy Housh; Bernold Richerzhagen

ICALEO 2006; M905https://doi.org/10.2351/1.5060916

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Micro-Cladding & Welding

Direct fabrication of thermosensors by laser micro-cladding functional materials

Xiaoyan Zeng; Zhigang Dai; Xiangyou Li

ICALEO 2006; M801https://doi.org/10.2351/1.5060908

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Tribaloy-800 coatings on steel substrates by means of laser cladding: Dilution effects on the microstructure and coating performance

M. J. Tobar; C. Montero; J. M. Amado; C. Alvarez; A. Yañez

ICALEO 2006; M802https://doi.org/10.2351/1.5060909

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comparison of different process monitoring methods for laser beam micro welding

Jens Gedicke; Boris Regaard; Kilian Klages; Alexander Olowinsky; Stefan Kaierle

ICALEO 2006; M803https://doi.org/10.2351/1.5060910

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Micro edge welding of thin Ni based alloy foils with direct diode laser processing and its application

Yoshinori Funada; Nobuyuki Abe; Masahiro Tsukamoto

ICALEO 2006; M804https://doi.org/10.2351/1.5060911

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Shadow^® – New applications in electronics and micromechanics

A. Olowinsky; K. Klages; J. Gedicke; A. Gillner; R. Poprawe

ICALEO 2006; M805https://doi.org/10.2351/1.5060912

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Metal micromachining with a new high average power picosecond pulse fiber laser

Jukka Kongas; Tiina Amberla; Matt Rekow

ICALEO 2006; M806https://doi.org/10.2351/1.5060913

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text