Volumes | ICALEO | AIP Publishing

Skip to Main Content

Skip Nav Destination

ICALEO 2005: 24th International Congress on Laser Materials Processing and Laser Microfabrication

PLENARY SESSION MANUSCRIPTS

Diode lasers for industrial applications

Martin Behringer; Harald König

ICALEO 2005; 1https://doi.org/10.2351/1.5060461

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fibre lasers: The new wave in material processing

David Parker; David N. Payne

ICALEO 2005; 9https://doi.org/10.2351/1.5060525

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LASER MATERIALS PROCESSING CONFERENCE MANUSCRIPTS

Laser Forming

Laser forming of thin section non ferrous metals with a ND:YAG laser source

K. Bartkowiak; J. Borowski; S. P. Edwardson; G. Dearden; C. Carey; K. G. Watkins

ICALEO 2005; 101https://doi.org/10.2351/1.5060407

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effects of clamping on the laser forming process

Andrew J. Birnbaum; Peng Cheng; Y. Lawrence Yao

ICALEO 2005; 102https://doi.org/10.2351/1.5060408

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microstructure integrated finite element modelling of laser forming of particle reinforced aluminium matrix composite sheets

F. R. Liu; K. C. Chan; C. Y. Tang

ICALEO 2005; 103https://doi.org/10.2351/1.5060409

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Thermal forming process design

David P. Mika; Michael E. Graham

ICALEO 2005; 104https://doi.org/10.2351/1.5060410

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Spinning of thin metal plate with diode laser

Toshiyuki Miyazaki; Tadashi Misu; Masanobu Nagahama; Shunro Yoshioka; Tsuyoshi Tokunaga; Yoshihiro Tanaka

ICALEO 2005; 105https://doi.org/10.2351/1.5060411

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of beam geometry on stress distribution in laser bending of tubes

Shakeel Safdar; Lin Li; M. A. Sheikh; Zhu Liu

ICALEO 2005; 106https://doi.org/10.2351/1.5060412

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Large diameter and thin wall laser tube bending

Wenwu Zhang; Marshall Jones; Michael Graham; Brian Farrell; Magdi Azer; Carl Erikson; Jie Zhang; Y. L. Yao

ICALEO 2005; 107https://doi.org/10.2351/1.5060413

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cutting & Drilling Processes & Systems

Chemistry in laser material processing

Wolfgang Danzer

ICALEO 2005; 201https://doi.org/10.2351/1.5060466

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Enhanced cutting of polycrystalline diamond with a q-switched diode pumped solid state laser

Paul Harrison; Matthew Henry; Jozef Wendland

ICALEO 2005; 202https://doi.org/10.2351/1.5060467

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of metal drilling characteristics with Q-switched CO₂ laser

Atsushi Sugihashi; Koji Hirano; Motoi Kido; Naoya Hamada

ICALEO 2005; 205https://doi.org/10.2351/1.5060468

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The combi-head – truly flexible laser processing by cutting and welding in a single machine with a single tool

Dirk Petring; Frank Schneider; Christian Benter; Reinhart Poprawe

ICALEO 2005; 207https://doi.org/10.2351/1.5060469

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

An exploratory study on the capabilities of lasers to cut granite plates

M. Boutinguiza; R. Soto; F. Lusquiños; F. Quintero; J. Pou; M. Pérez-Amor

ICALEO 2005; P537https://doi.org/10.2351/1.5060595

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid Laser Welding

Laser-tig hybrid welding of very thin austenitic stainless steel sheets

Jorge L. Arias; Pablo Romero; Ambroise Vandewynckèle; Joaquín Vázquez

ICALEO 2005; 301https://doi.org/10.2351/1.5060482

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fundamental study on welding phenomena in pulsed laser-gma hybrid welding

Tomohiro Sugino; Susumu Tsukamoto; Terumi Nakamura; Goro Arakane

ICALEO 2005; 302https://doi.org/10.2351/1.5060483

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A study of the phenomenon of CO2-laser welding with filler wire and mag hybrid welding

Anna Fellman; Antti Salminen

ICALEO 2005; 303https://doi.org/10.2351/1.5060484

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Metallurgical study on laser-mag hybrid welding of HSLA-590 steel

Zhongjie Liu; Muneharu Kutsuna

ICALEO 2005; 304https://doi.org/10.2351/1.5060485

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser - mig hybrid weldability of high stregnth steel for car industry

Mok-Young Lee; Woong-Seong Chang; Young-Gak Kweon; Dong-Won Lee

ICALEO 2005; 305https://doi.org/10.2351/1.5060486

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Experimental analysis of practical aspects of hybrid welding of thick sections

E. W. Reutzel; S. M. Kelly; J. F. Tressler; R. P. Martukanitz

ICALEO 2005; 306https://doi.org/10.2351/1.5060487

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid bifocal laser welding of aluminum

Andreas Trautmann; Michael F. Zaeh

ICALEO 2005; 307https://doi.org/10.2351/1.5060488

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

CO₂ laser beam welding of aluminum alloys with electric current addition

R. S. Xiao; T. C Zuo; G. Ambrosy; H. Hügel

ICALEO 2005; P519https://doi.org/10.2351/1.5060583

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of process parameters on the gap bridging capability for CO2 laser-gma hybrid welding

Hyunbyung Chae; Cheolhee Kim; Jeonghan Kim; Sehun Rhee

ICALEO 2005; P520https://doi.org/10.2351/1.5060584

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser and hybrid welding of high strength steel. Application to pressure vessel manufacturing

Frederic Coste; Remy Fabbro; Cyprien Allais; Jean Paul Mas

ICALEO 2005; P546https://doi.org/10.2351/1.5060600

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effects of hybrid welding parameters on porosity formation IN C-Mn steel for shipbuilding

Seung-Gab Hong; Jong-Bong Lee

ICALEO 2005; P554https://doi.org/10.2351/1.5060605

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Characterisation of Al-Mg alloys mig-laser CO₂ combined welding

Giuseppe Casalino; Antonio Ludovico; Giuseppe Chieco

ICALEO 2005; P564https://doi.org/10.2351/1.5060610

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Super High Efficiency Diode Sources (SHEDS)

High power conversion efficiency diode lasers for pumping high power solid state laser systems

M. Kanskar; T. Goodnough; E. Stiers; D. Botez; L. J. Mawst

ICALEO 2005; 401https://doi.org/10.2351/1.5060489

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

> 76% CW wall-plug efficiency at high powers from 0.98-µM emitting laser diodes sheds shows route to 1kW CW diode laser bar

Paul Crump; Weimin Dong; Shiguo Zhang; Mike Grimshaw; Mark DeFranza; Sandrio Elim; Damian Wise; Guokui Kuang; Jun Wang; Suhit Das; Jason Farmer; Mark DeVito

ICALEO 2005; 402https://doi.org/10.2351/1.5060490

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-efficiency, high power laser diodes

Matthew Peters; Victor Rossin; Erik Zucker; Bruno Acklin

ICALEO 2005; 403https://doi.org/10.2351/1.5060491

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High power, high efficiency vertical cavity surface emitting laser for diode pumping

Jean-Francoise Seurin; L. Arthur D’Asaro; Jongwoo Kim; Delai Zhou; James D. Wynn; John Boardman; Chuni Ghosh

ICALEO 2005; 404https://doi.org/10.2351/1.5060492

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High power, high efficiency vcsel arrays with narrow emission spectrum

J. Watson; A. Mooradian; R. Nabiev; G. Carey; S. Hallstein; B. Cantos; W. Hitchens; M. Jansen; F. Fang; K. Scholtz

ICALEO 2005; 405https://doi.org/10.2351/1.5060493

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Large-area, semiconductor transverse Bragg resonance (TBR) lasers for efficient, high power operation

John M. Choi; Lin Zhu; William M. J. Green; Guy DeRose; Amnon Yariv

ICALEO 2005; 406https://doi.org/10.2351/1.5060494

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Spectral stabilization of high efficiency diodes and diode bars by external Bragg resonator

Leonid Glebov; George Venus

ICALEO 2005; 407https://doi.org/10.2351/1.5060495

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-power diode laser array metrology

Chris Cromer; Xiaoyu Li

ICALEO 2005; 409https://doi.org/10.2351/1.5060496

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Applications of Fiber Lasers

Feasibility investigation of laser welding aluminum alloy 7075-T6 through the use of a 300 W, single-mode, ytterbium fiber optic laser

A. G. Paleocrassas; J. F. Tu

ICALEO 2005; 503https://doi.org/10.2351/1.5060497

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Combining high-speed laser perforation and cold roll forming for the production of bio-medical micro-filtration membranes

M. Baumeister; K. Dickmann; A. P. Hoult

ICALEO 2005; 504https://doi.org/10.2351/1.5060498

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Welding with fiber lasers from 200 to 17000 W

Frank Vollertsen; Claus Thomy

ICALEO 2005; 506https://doi.org/10.2351/1.5060499

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of spot size and laser beam quality on welding performance when using high-power continuous wave solid-state lasers

Geert Verhaeghe; Paul Hilton

ICALEO 2005; 507https://doi.org/10.2351/1.5060500

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Flexible Yb-doped fiber laser generating a single-transverse mode beam with up to 0.5mJ/11W

Tim Lauterborn; Stefan Heinemann; Almantas Galvanauskas

ICALEO 2005; 508https://doi.org/10.2351/1.5060501

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

In-process monitoring and adaptive control in YAG laser butt micro-welding of titanium

Yousuke Kawahito; Masayuki Kito; Seiji Katayama; Hiroshi Nakamura

ICALEO 2005; P504https://doi.org/10.2351/1.5060571

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Process Sensing, Monitoring & Control

Expansion of trinocular CCD-based optical detector to multi-track laser cladding real-time monitoring

Mehrdad Iravani-Tabrizipour; Ehsan Toyserkani; Mathew Asselin; Amir Khajepour

ICALEO 2005; 535https://doi.org/10.2351/1.5060502

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Experimental observations of the laser keyhole welding process of AA5182

B. J. Aalderink; R. G. K. M. Aarts; J. B. Jonker; J. Meijer

ICALEO 2005; 1801https://doi.org/10.2351/1.5060448

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Results on process control for YAG steel welding

Mehdi Guiraud; Pascal Aubry

ICALEO 2005; 1802https://doi.org/10.2351/1.5060449

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser shock peening plasma diagnostics sensors for real-time process monitoring

Pamela Benicewicz; Magdi Azer; John Deaton; Pingfan Wu; Todd Rockstroh

ICALEO 2005; 1803https://doi.org/10.2351/1.5060450

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Low cost camera based sensor system for advanced laser heat treatment processes

Steffen Boyanss; Marko Seifert; Jan Hannweber; Udo Karsunke; Eckhardt Beyer

ICALEO 2005; 1804https://doi.org/10.2351/1.5060451

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Vision-Based dual feedback control of deposition height for laser consolidation

Guo-Shuang Cai; Bing-Ran Zuo; Robert W. Tait; Kevin G. Harding; Henry Peng; Magdi Azer

ICALEO 2005; 1805https://doi.org/10.2351/1.5060452

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Robust process-controller for Nd:YAG welding

M. W. de Graaf; J. Olde Benneker; R. G. K. M. Aarts; J. Meijer; J. B. Jonker

ICALEO 2005; 1806https://doi.org/10.2351/1.5060453

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of transfer functions for controlling fabrication of components by laser net shape deposition (LNSM)

Huan Qi; Magdi Azer; John Deaton

ICALEO 2005; 1807https://doi.org/10.2351/1.5060454

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Beam monitoring benefits for shop floor laser applications

J Gabzdyl; M Sparkes; W O’Neill

ICALEO 2005; 1808https://doi.org/10.2351/1.5060455

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Sensor integration for robotic laser welding processes

Dimitrios Iakovou; Ronald Aarts; Johan Meijer

ICALEO 2005; 2301https://doi.org/10.2351/1.5060477

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Monitoring laser cladding

K. H. Leong; K. L. Ho; H. C. Man

ICALEO 2005; 2302https://doi.org/10.2351/1.5060478

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Monitoring of Nd:YAG laser spot welding: Detection of porosity defect by weld sound

S. Yoshioka; T. Misu; Y. Kitamura; T. Tokunaga; T. Miyazaki

ICALEO 2005; 2304https://doi.org/10.2351/1.5060479

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

In-process monitoring and adaptive control for lap welds of aluminum alloy sheets

Yousuke Kawahito; Seiji Katayama

ICALEO 2005; 2305https://doi.org/10.2351/1.5060480

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advantages of coaxial external illumination for monitoring and control of laser materials processing

Boris Regaard; Stefan Kaierle; Wolfgang Schulz; Anas Moalem

ICALEO 2005; 2307https://doi.org/10.2351/1.5060481

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Visualization of interaction between laser beam and YAG-laser-induced plume

Kawahito Yousuke; Kinoshita Keisuke; Katayama Seiji; Tsubota Shuho; Ishide Takashi

ICALEO 2005; P530https://doi.org/10.2351/1.5060589

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct Fabrication / Rapid Prototyping Processes & Systems

New trends in laser sintering : Analysis of the process and new applications

Nadine Coulon; Pascal Aubry; Patrick Teulet

ICALEO 2005; 601https://doi.org/10.2351/1.5060503

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development and performance evaluation of industrial 3D real object duplication system by selective dual-laser sintering process

Dong Soo Kim; Young Jin An; Kyung Hyun Choi

ICALEO 2005; 602https://doi.org/10.2351/1.5060504

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Recent developments in metal laminated tooling

Thomas Himmer; Anja Techel; Steffen Nowotny; Eckhard Beyer

ICALEO 2005; 603https://doi.org/10.2351/1.5060505

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Tool path generation for 3D laser cladding using adaptive slicing technology

Michael Kerschbaumer; Georg Ernst; Paul O’Leary

ICALEO 2005; 604https://doi.org/10.2351/1.5060506

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser net shape manufacturing of metallic materials with CO₂ and fiber laser

Yanmin Li; Xiaoping Huang; Yong Liu; Henry Peng; Magdi Azer

ICALEO 2005; 605https://doi.org/10.2351/1.5060507

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Investigation on toolpath geometries for surface quality improvement in laser net shape manufacturing

Prabhjot Singh; Prashant Kulkarni; Huan Qi; Vinod Kumar; Magdi Azer

ICALEO 2005; 606https://doi.org/10.2351/1.5060508

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microstructure study of direct laser fabricated compositionally graded ti alloys using simultaneous feed of powder and wire

Fude Wang; Junfa Mei; Xinhua Wu

ICALEO 2005; 607https://doi.org/10.2351/1.5060509

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser rapid forming of graded TI6AL4V/RENE88DT alloy

Xin Lin; T. M. Yue; Haiou Yang; Weidong Huang

ICALEO 2005; 608https://doi.org/10.2351/1.5060510

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser consolidation of Al 4047 alloy

Lijue Xue; Jianyin Chen; Andre Theriault

ICALEO 2005; 609https://doi.org/10.2351/1.5060511

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser deposition of refractory Mo-Ni alloys

Ting Huang; Minlin Zhong; Wenjin Liu; Jinjiang He; Hongjun Zhang

ICALEO 2005; 610https://doi.org/10.2351/1.5060512

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mechanical properties optimization in stereolithographic process

Sabina Luisa Campanelli; Antonio Domenico Ludovico; Caterina Casavola

ICALEO 2005; P549https://doi.org/10.2351/1.5060602

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Business Development

International linking of research and development on the model of laser centre hanover

Klaus-Dieter Nowitzki; Olaf Boedecker

ICALEO 2005; 701https://doi.org/10.2351/1.5060513

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Specialty manufacturing..partnering, making money and having fun

Lori Beer; Mike Adelstein

ICALEO 2005; 703https://doi.org/10.2351/1.5060514

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Is your business missing the stage?

William E. Lawson, P.E.

ICALEO 2005; 704https://doi.org/10.2351/1.5060515

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Polymer Joining Processes

Quasi-simultaneous laser welding of polymers - the process and applications for mass-production

Anssi Jansson; Saara Kouvo; Veli Kujanpää

ICALEO 2005; 801https://doi.org/10.2351/1.5060516

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effects of laser beam scattering on through-transmission welding of polymers

Mariana Ilie; Jean-Cristophe Kneip; Simone Mattei; Alexandru Nichici

ICALEO 2005; 802https://doi.org/10.2351/1.5060517

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser welding of polymers – new innovations for joining 3D geometries

Saara Kouvo; Anssi Jansson; Antti Salminen

ICALEO 2005; 803https://doi.org/10.2351/1.5060518

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A 2-D thermal model for laser transmission welding of thermoplastics

L. S. Mayboudi; A. M. Birk; G. Zak; P. J. Bates

ICALEO 2005; 805https://doi.org/10.2351/1.5060519

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Diode Lasers & Diode Processing

Development trends of high power diode lasers and resulting perspectives for applications

Reinhart Poprawe; Peter Loosen; Dieter Hoffmann; Christian Wessling; Martin Traub

ICALEO 2005; 901https://doi.org/10.2351/1.5060520

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Heat conduction welding of thin foils with elliptical beam of direct diode laser

Nobuyuki Abe; Masahiro Tsukamoto; Takashi Imanaka; Yoshinori Funada

ICALEO 2005; 902https://doi.org/10.2351/1.5060521

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Highly reliable diode ensembles for direct diode applications and pumping solid-state lasers

Andrew Leuzinger

ICALEO 2005; 903https://doi.org/10.2351/1.5060522

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Productivity issues in diode laser transformation hardening

Henrikki Pantsar

ICALEO 2005; 905https://doi.org/10.2351/1.5060523

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High power diode laser-assisted fiber placement of composite structure

John M. Haake

ICALEO 2005; 907https://doi.org/10.2351/1.5060524

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser modification of hot-work tool steels gradient layers P551

Leszek A. Dobrzański; Mirosław Bonek; Marek Piec; Eugeniusz Hajduczek; Andrzej Klimpel

ICALEO 2005; P551https://doi.org/10.2351/1.5060604

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Surface treatment of welded duplex stainless steels by diode laser

Edoardo Capello; Moreno Castelnuovo; Barbara Previtali; Maurizio Vedani

ICALEO 2005; P565https://doi.org/10.2351/1.5060611

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Process Modeling & Simulation

Assist gas behaviours in the cutting groove of different thickness

Takeji Arai; Noritaka Asano

ICALEO 2005; 1001https://doi.org/10.2351/1.5060402

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Phase-field model for microstructure evolution of laser cladding process

Y. Cao; J. Choi

ICALEO 2005; 1002https://doi.org/10.2351/1.5060403

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Wave-solid interactions in shock induced deformation processes

Yajun Fan; Youneng Wang; Sinisa Vukelic; Y. Lawrence Yao

ICALEO 2005; 1003https://doi.org/10.2351/1.5060404

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A microstructure model for laser processing of Ti-6Al-4V

S. M. Kelly; S. S. Babu; S. A. David; T. Zacharia; S. L. Kampe

ICALEO 2005; 1005https://doi.org/10.2351/1.5060405

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical modeling of molten pool formation during an interaction of a pulse laser (Nd:YAG) with an aluminum sheet

Nicolas Pierron; Pierre Sallamand; Simone Matteï

ICALEO 2005; 1006https://doi.org/10.2351/1.5060406

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effects of thermal History on microstructures of direct-laser-fabricated Ti-6Al-4V alloy

L. Qian; J. Mei; Xinhua Wu

ICALEO 2005; 1301https://doi.org/10.2351/1.5060428

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modeling laser keyhole-welding with adaptive mesh refinement

Peng Li; Hyungson Ki; Jyoti Mazumder

ICALEO 2005; 1302https://doi.org/10.2351/1.5060429

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mathematical model based on kinetics and thermodynamics for estimating the properties of laser hardened surfaces

Henrikki Pantsar

ICALEO 2005; 1303https://doi.org/10.2351/1.5060430

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of an empirical model for laser forming of austenitic stainless steels

Jack Pennuto, Jr.; Joohyun Choi

ICALEO 2005; 1304https://doi.org/10.2351/1.5060431

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-gma hybrid welding: Distortion analysis and design optimization modelling techniques

M. M. Bugarewicz; S. M. Kelly; P. Michaleris; E. W. Reutzel; R. P. Martukanitz

ICALEO 2005; 1305https://doi.org/10.2351/1.5060432

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimisation of t-joint properties in Al-Mg-Si alloy laser welding

E. Cicala; G. Duffet; H. Andrzjewski; D. Grevey

ICALEO 2005; P525https://doi.org/10.2351/1.5060586

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Deposition Processes

Results on process engineering and control of single crystal blades laser repairing

Thierry Malot; Pascal Aubry

ICALEO 2005; 1101https://doi.org/10.2351/1.5060414

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser clads for application as bearing materials: Microstructure and tribologicalproperties

Rolf Galun; Gunar Bergmann; Detlef Weinhausen

ICALEO 2005; 1102https://doi.org/10.2351/1.5060415

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

In-situ cladding of leading edge of lp turbine blades using fibre delivered diode laser

M. Brandt; J. Harris; S. Sun; B. Dempster; N. Alam; A. Bishop

ICALEO 2005; 1103https://doi.org/10.2351/1.5060416

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Scientific and technological landscape of laser cladding: A bibliometric analysis of patents and publications

J. Archambeault; L. Dubourg

ICALEO 2005; 1104https://doi.org/10.2351/1.5060417

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Pitting resistance of laser clad alloys 625, C-276, 59, and 686

Eric Whitney; Seanda Williams; Brad Krantz

ICALEO 2005; 1105https://doi.org/10.2351/1.5060418

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Synthesis of Nb₃Al high temperature intermetallic compound by laser deposition

Jinjiang He; Minlin Zhong; Wenjin Liu; Hongjun Zhang; Ting Huang

ICALEO 2005; 1106https://doi.org/10.2351/1.5060420

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Phase transformations of rapidly solidified nickel based superalloy

Akeel Dhahir Subhi; Mohammed Jasim Kadhim; Ahmed Ali Moosa

ICALEO 2005; 1401https://doi.org/10.2351/1.5060433

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of process parameters on residual stresses within an inconel 718 part produced by the direct laser deposition process

Andrew J. Pinkerton; Judith Shackleton; Richard Moat; Lin Li; Philip Withers; Michael Preuss; Jeffrey Allen; Paul Hilton; Robert Folwell

ICALEO 2005; 1402https://doi.org/10.2351/1.5060434

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser clad WC reinforced Ni-Based intermetallic-matrix composites to improve cavitation erosion resistance

M. Duraiselvam; R. Galun; V. Wesling; B. L. Mordike

ICALEO 2005; 1403https://doi.org/10.2351/1.5060435

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High efficiency laser cladding at elevated processing speed

K. Partes; T. Seefeld; G. Sepold; F. Vollertsen

ICALEO 2005; 1404https://doi.org/10.2351/1.5060436

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Residual stresses in HPDL and ND:YAG laser cladded coatings

Jari Tuominen; Petri Vuoristo; Tapio Mäntylä

ICALEO 2005; P510https://doi.org/10.2351/1.5060575

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cladding of inconel 617

Mohammed Jasim Kadhim; Akeel Dhahir Subhi; Ahmed Ali Moosa

ICALEO 2005; P521https://doi.org/10.2351/1.5060585

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

On the wear properties of laser coatings with high carbide concentrations

Janne Nurminen; Jonne Näkki; Petri Vuoristo

ICALEO 2005; P533https://doi.org/10.2351/1.5060592

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cladding on cast iron substrates

Janne Nurminen; Jonne Näkki; Petri Vuoristo

ICALEO 2005; P534https://doi.org/10.2351/1.5060593

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mechanical properties of the laser cladded alloys Ti-6Al-4V and inconel 718

Ingomar Kelbassa; Ernst Wolfgang Kreutz; Patrick Albus; Leping Zhu

ICALEO 2005; P536https://doi.org/10.2351/1.5060594

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of laser developed Al-Cr surface alloys: Microstructure, mechanical and wear behavior

Amelia Almeida; Patrícia Carvalho; Rui Vilar

ICALEO 2005; P568https://doi.org/10.2351/1.5060613

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Novel Processes

Surface modification by chemical-slurry laser coating

Tamer Ezz; Philip Crouse; Lin Li; Zhu Liu

ICALEO 2005; 1202https://doi.org/10.2351/1.5060421

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Active control of heat induced deformation in a laser deposition process

Umesh A. Korde; Michael A. Langerman; Matthew E. Hainy; Travis J. Zelfer; James W. Sears

ICALEO 2005; 1203https://doi.org/10.2351/1.5060422

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

CO₂ laser welding fused silica

D. O. MacCallum; G. A. Knorovsky; S. T. Reed

ICALEO 2005; 1204https://doi.org/10.2351/1.5060423

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser drilling of natural granite plates

R. Soto; M. Boutinguiza; A. Riveiro; F. Lusquiños; F. Quintero; J. Pou; M. Pérez-Amor

ICALEO 2005; 1205https://doi.org/10.2351/1.5060424

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cost effective laser shock processing development at Ge aircraft engines

T. J. Rockstroh

ICALEO 2005; 1206https://doi.org/10.2351/1.5060425

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Active stressing and the control of macro-scale damage in unsupported ceramics during laser machining

A. E. Segall; G. Cai; R. Arakrapu; S. Pullford; P. Brugan

ICALEO 2005; 1207https://doi.org/10.2351/1.5060426

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of the laser stir welding process for aluminum laser beam welding

R. P. Martukanitz; I. Stol; J. F. Tressler; C. J. Warren

ICALEO 2005; 1208https://doi.org/10.2351/1.5060427

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser assisted turning of hardened steel

Sakai Katsuhiko; Suzuki Yasuo

ICALEO 2005; P516https://doi.org/10.2351/1.5060580

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Two-dimensional modeling of laser spallation drilling of rocks

Zhiyue Xu; Yuichiro Yamashita; Claude B. Reed

ICALEO 2005; P532https://doi.org/10.2351/1.5060591

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Sealing of human dentinal tubules by KrF 248 nm laser radiation

M. Sivakumar; V. Oliveira; R. Vilar

ICALEO 2005; P569https://doi.org/10.2351/1.5060614

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optics

CO₂ laser beam caustic measument with focal spot analyser

Flemming Ove Olsen; Hui Gong; Claus Bagger

ICALEO 2005; 1501https://doi.org/10.2351/1.5060437

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Non-contact measurement of central lens thickness

Matthias Kunkel; Jochen Schulze; Markus Kogel-Hollacher; Susan Sprentall

ICALEO 2005; 1502https://doi.org/10.2351/1.5060438

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optical characteristics of Nd:YAG optics and distortions at high power

Dirk F. de Lange; Johannes T. Hofman; Johan Meijer

ICALEO 2005; 1503https://doi.org/10.2351/1.5060439

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Novel focusing optics for IR lasers

Gary Herrit; Alan Hedges; Herman Reedy

ICALEO 2005; 1504https://doi.org/10.2351/1.5060440

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Surface Treatment & Modification

Crystalline controlled cladding of Ni-base single crystal superalloy by diode laser

Yoshihiro Fujita; Kazuyoshi Saida; Kazutoshi Nishimoto

ICALEO 2005; 1601https://doi.org/10.2351/1.5060441

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Improvement of IGC resistance of SUS 304 stainless steel by laser surface melting based on grain boundary engineering

Sen Yang; Hiroyuki Kokawa; Zhanjie Wang

ICALEO 2005; 1602https://doi.org/10.2351/1.5060442

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser strengthening of air-cooled diesel engine phosphorus cast iron cylinder liner and its friction & wear properties

Sanhuan Wang; Wenjin Liu; Minlin Zhong; Chaofeng Wu; Weiming Zhang; Hongjun Zhang

ICALEO 2005; 1603https://doi.org/10.2351/1.5060443

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mono-and multi-layer magnesium alloys laser (Nd:YAG) cladding using aluminum based powders

Sorin Ignat; Pierre Sallamand; Dominique Grevey

ICALEO 2005; 1604https://doi.org/10.2351/1.5060444

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Single-step graded surface coating using combined wire and powder feeding laser clading

Waheed Ul Haq Syed; Andrew Pinkerton; Zhu Liu; Lin Li

ICALEO 2005; 1606https://doi.org/10.2351/1.5060445

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser surface melting of high-speed steels for enhancing surface properties

C. T. Kwok; F. T. Cheng; H. C. Man; K. I. Leong

ICALEO 2005; P507https://doi.org/10.2351/1.5060573

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Corrosion properties of thermally sprayed in-situ laser remelted Ni-based coatings

Jyrki Suutala; Jari Tuominen; Petri Vuoristo

ICALEO 2005; P508https://doi.org/10.2351/1.5060574

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Researches of cast iron piston rings strengthened by laser

Qingmao zhang; Wenjin Liu; Jianhong Liao; Xiwei Zhang

ICALEO 2005; P572https://doi.org/10.2351/1.5060616

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Lasers & Systems Technology

Laser tool control recommendations

Manfred Berger; Martin Benzing; Klaus G. Hänsel

ICALEO 2005; 1701https://doi.org/10.2351/1.5060446

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle

Andrew J Pinkerton; Waheed Ul Haq Syed; Mallikarjun Karadge; Lin Li

ICALEO 2005; 1702https://doi.org/10.2351/1.5060447

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Industrial Processes & Technology

Deep engraving of metals for the automotive sector using high average power diode pumped solid state lasers

Jozef Wendland; Paul M. Harrison; Matthew Henry; Michael Brownell

ICALEO 2005; 1901https://doi.org/10.2351/1.5060456

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Challenges in laser cooling water systems

Lars Capener; James Dillon; Brian Jenkins

ICALEO 2005; 1902https://doi.org/10.2351/1.5060457

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser welding for coil joining in a steel mill: Technical advantages and economics

Robert Mueller; Andy Lee; Deni Bellai

ICALEO 2005; 1903https://doi.org/10.2351/1.5060458

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

How laser production systems are being employed to effectively machine, weld and repair turbine engine components

John Stackhouse; Martin Bull; Mike Wakeham

ICALEO 2005; 1904https://doi.org/10.2351/1.5060459

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High performance scanner for remote welding with Nd:YAG lasers

Jannis Stemmann; Claus Emmelmann

ICALEO 2005; 1905https://doi.org/10.2351/1.5060460

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Welding & Brazing

Laser fabricated metallic cellular sandwich panels

Stephen Copley; Eduard Ventsel; Peter Vigna

ICALEO 2005; 2001https://doi.org/10.2351/1.5060462

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Intelligent laser joining in the automotive industry

Jean-Paul Boillot; Frederic Arsenault; Anne-Gaelle Defachelles; Jeffrey Noruk

ICALEO 2005; 2002https://doi.org/10.2351/1.5060463

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser braze welding using hot (88%-aluminum,12%-silicon) filler material to join steel with aluminum

Alexandre Mathieu; Simone Matteï; Jean –Claude Viala; Dominique Grevey

ICALEO 2005; 2005https://doi.org/10.2351/1.5060464

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Distortion minimization and shielding gas flow optimistion in CO₂-laser remote welding of steel

Steffen Neumann; Claus Thomy; Thomas Seefeld; Frank Vollertsen

ICALEO 2005; 2006https://doi.org/10.2351/1.5060465

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Rationalizing requirements for gaps, surface offsets and edge radii in miniature laser welded components

G. A. Knorovsky; J. T. Norris; R. A. Roach; C. V. Robino

ICALEO 2005; 2201https://doi.org/10.2351/1.5060472

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Induction assisted laser beam welding of high strength steel sheets

Oliver Meier; Heinz Haferkamp; Andreas Ostendorf; Axel Bormann

ICALEO 2005; 2202https://doi.org/10.2351/1.5060473

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Tandem laser brazing of heat-resistant alloys using precious filler metals

Kazuyoshi Saida; Woohyun Song; Kazutoshi Nishimoto

ICALEO 2005; 2204https://doi.org/10.2351/1.5060474

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Melt pool dynamics in high speed welding with modern high power solid state lasers

Klaus Behler; Peter Schäfer

ICALEO 2005; 2205https://doi.org/10.2351/1.5060475

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-Frequency beam oscillating to increase the process stability during laser welding with high melt pool dynamics

Olaf Berend; Heinz Haferkamp; Oliver Meier; Lars Engelbrecht

ICALEO 2005; 2206https://doi.org/10.2351/1.5060476

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Solidification rate in laser welding and its influence on AA 2024 weld quality

Bin Hu; Ian M. Richardson

ICALEO 2005; P511https://doi.org/10.2351/1.5060576

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

ND:YAG laser welding of AA6061: Experimental differences between the TEE and LAP joint configurations

L. Dubourg

ICALEO 2005; P515https://doi.org/10.2351/1.5060579

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

An innovative joining strategy in order to join zinc coated steels with minimized damaging of the coating

Johannes Wilden; Jean Pierre Bergmann; Markus Dolles; Sebastian Reich

ICALEO 2005; P550https://doi.org/10.2351/1.5060603

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Process parameters effects on Al-Mg alloys mig-laser CO₂ welding

Giuseppe Casalino; Francesco Lobifaro

ICALEO 2005; P563https://doi.org/10.2351/1.5060609

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of an advanced dual beam head for laser lap joining of zinc coated steel sheet without gap at the interface

Mariana G. Forrest; Feng Lu

ICALEO 2005; P567https://doi.org/10.2351/1.5060612

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Plasma, Gas & Keyhole Effects

Importance of the coupling between the induced vapor plume and the melt pool, for Nd-YAG CW laser welding

Rémy Fabbro; Sonia Slimani; Ivan Doudet; Frédéric Coste; Francis Briand

ICALEO 2005; 2101https://doi.org/10.2351/1.5060470

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The rapid manufacture of micro hierarchical structures by selective laser melting

C. Sutcliffe; W. Brooks; W. Cantwell; P. Fox; J. Todd; R. Mines

ICALEO 2005; 2102https://doi.org/10.2351/1.5060471

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

2D effect during the propagation of schock wave induced by laser plasma : Application for laser adherence test (LASAT)

Laurent Berthe; Cyril Bolis; Michel Boustie; Michel Arrigoni; Sophie Barradas; Michel Jeandin

ICALEO 2005; P556https://doi.org/10.2351/1.5060606

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Gas investigation on laser drilling

Matthieu Schneider; Rémy Fabbro; Laurent Berthe; Maryse Muller; Mariette Nivard

ICALEO 2005; P559https://doi.org/10.2351/1.5060608

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Measurement & Characterization

Spectroscopic study of magnetically-confined laser induced aluminium plasma

Y. X. Han; Y. F. Lu; T. Gebre

ICALEO 2005; M501https://doi.org/10.2351/1.5060549

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Measuring UV-Lasers in focus within a few seconds basis for laser micro manufacturing

Harald Schwede; Reinhard Kramer; Stefan Wolf; Volker Brandl; Otto Märten

ICALEO 2005; M502https://doi.org/10.2351/1.5060550

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Stochastic heating in laser materials processing

W. W. Duley

ICALEO 2005; M503https://doi.org/10.2351/1.5060551

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Magnetic confinement of plasmas in laser-induced breakdown spectroscopy for improving sensitivity and accuracy

T. Gebre; Y. F. Lu; Y. X. Han

ICALEO 2005; P517https://doi.org/10.2351/1.5060581

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LASER MICROFABRICATION CONFERENCE MANUSCRIPTS

Glass Micromachining

Laser processing of optical material: Drilling, dicing and modifying thin glass

David Ashkenasi

ICALEO 2005; M103https://doi.org/10.2351/1.5060526

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

New ultrafast high-energy laser concepts and their applications

Wolfgang Seitz; Heinz Huber; Max J. Lederer; Daniel Kopf; Alexander Killi; Uwe Morgner

ICALEO 2005; M105https://doi.org/10.2351/1.5060527

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Research on direct laser patterning of thin films for flat-panel display

Reo Usui; Ryohei Satoh; Yoshiharu Iwata; Koji Nakagawa; Eiji Morinaga; Satoru Takaki

ICALEO 2005; M106https://doi.org/10.2351/1.5060528

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct write patterning of ito film by femtosecond laser ablation

Hae woon Choi; Dave Farson; Kwang-Ryul Kim; Soon-Kug Hong

ICALEO 2005; M107https://doi.org/10.2351/1.5060529

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Marking glass with continuous and pulsed CO₂ laser radiation

Ana Rolo; João Coelho; Margarida Pires

ICALEO 2005; P506https://doi.org/10.2351/1.5060572

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Micro Cutting, Drilling & Shaping

High power dpss laser micromachining of silicon, tungsten and stainless steel for device singulation

Dimitris Karnakis; Graham Rutterford; Martyn Knowles

ICALEO 2005; M201https://doi.org/10.2351/1.5060530

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

UV-micromachining by excimer laser

Rainer Paetzel; Thorsten Geuking; Jan Brune; Helmut Schillinger

ICALEO 2005; M202https://doi.org/10.2351/1.5060531

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of beam angle on heat affected zone, recast and oxide layer in laser drilling of thermal barrier coated nickel alloys

H. K. Sezer; Lin Li; B. Anderson; P. Williams; M. Schmidt

ICALEO 2005; M203https://doi.org/10.2351/1.5060532

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Feasibility study of laser ablation using long-pulsed, 300W, CW single-mode fiber laser

J. R. Dilwith; W. R. Harp; J. F. Tu

ICALEO 2005; M204https://doi.org/10.2351/1.5060533

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optical trepaning using axicon lenses

D. Zeng; W. P. Latham; P. F. Jacobs; A. Kar

ICALEO 2005; M205https://doi.org/10.2351/1.5060534

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Water-jet guided fiber lasers for mask cutting

Delphine Perrottet; Simone Amorosi; Bernold Richerzhagen

ICALEO 2005; M206https://doi.org/10.2351/1.5060535

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microshaping of densely sintered zirconia ceramic using femtosecond lasers

Niko Bärsch; Kristian Werelius; Stephan Barcikowski; Fernando Liebana; Uwe Stute; Andreas Ostendorf

ICALEO 2005; M207https://doi.org/10.2351/1.5060536

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of recombination on ultrashort pulse laser material removal by Coulomb explosion

Rohit B. Viegas; Cho Lik Chan

ICALEO 2005; M208https://doi.org/10.2351/1.5060537

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micro adjustment – from new basic process knowledge to the application

Michael Schmidt; Manfred Dirscherl; Matthias Rank; Maik Zimmermann

ICALEO 2005; M209https://doi.org/10.2351/1.5060538

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of polymers laser grooving by using the analysis of variance method

Adelina Han; Dominique Grevey; Alexandru Nichici; Gianni Pillon

ICALEO 2005; P526https://doi.org/10.2351/1.5060587

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High rep rate picosecond laser materials processing

Chuck Ratermann; Ralf Knappe; Thomas Herrmann; Bernhard Henrich; Achim Nebel

ICALEO 2005; P539https://doi.org/10.2351/1.5060596

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Using neural networks and dempster-shafer theory for failure detection and diagnosis of excimer laser ablation

Ronald Setia; Gary S. May

ICALEO 2005; P570https://doi.org/10.2351/1.5060615

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Novel Micro/Nanoscale Processing & Fabrication

Micro welding of thin metals with low power pulsed Nd: YAG laser

Mohammed Naeem; Peter Collins

ICALEO 2005; M302https://doi.org/10.2351/1.5060539

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Electron beam welding vs. laser beam welding for air bearing shaft

M. Naeem; Steve Lock; Peter Collins; Geoff Hooley

ICALEO 2005; M305https://doi.org/10.2351/1.5060540

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-Assisted imprinting of self-assembled nanostructures

H. Wang; K. K. Mendu; Y. F. Lu

ICALEO 2005; M306https://doi.org/10.2351/1.5060541

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

“The influence of the low-energy, monochromatic radiancein blue spectral range upon vital functions of rabbits organisms, (comparative analysis)”

Leonid A. Linnik; Olexander S. Pekaryk

ICALEO 2005; P528https://doi.org/10.2351/1.5060588

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct-patterning of silicon carbide by nanosphere-assisted pulsed laser

Arvind Battula; Senthil Theppakuttai; Shaochen Chen

ICALEO 2005; P543https://doi.org/10.2351/1.5060598

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Near-Field nano-molding of gold thin films by a pulsed laser

Dongbing Shao; Shifeng Li; Shaochen Chen

ICALEO 2005; P544https://doi.org/10.2351/1.5060599

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The novel process of microstructures production by laser direct patterning

Dumitru Ulieru; Alina Ciuciumis

ICALEO 2005; P558https://doi.org/10.2351/1.5060607

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Ultrafast Laser Processing

Realization of precision shaped-hole drilling using ultra-fast lasers

Chen-Hsiung Cheng; Xinbing Liu

ICALEO 2005; M401https://doi.org/10.2351/1.5060542

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct writing of buried waveguides in hybrid organic-inorganic sol-gel by femtosecond laser pulses

David K. Y. Low; Xiao Zhang; Hong Xie; Zhongli Li; G. C. Lim; Santosh K. Pani; Chee C. Wong

ICALEO 2005; M402https://doi.org/10.2351/1.5060543

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Processing of polymers by UV picosecond lasers

Gediminas Raciukaitis; Mindaugas Gedvilas

ICALEO 2005; M403https://doi.org/10.2351/1.5060544

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of ionization on femtosecond laser pulse propagation in silicon

Huayu Li; Hyungson Ki

ICALEO 2005; M405https://doi.org/10.2351/1.5060545

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Femtosecond bulk laser micromachining of microfluid channels in PMMA

Dave Farson; Hae Choi; Chun Lu

ICALEO 2005; M406https://doi.org/10.2351/1.5060546

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Ultrashort pulse laser micromachining performance enhancements

Benjamin R. Campbell; Vladimir V. Semak; Jeffery G. Thomas

ICALEO 2005; M407https://doi.org/10.2351/1.5060547

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microstructuring using femtosecond pulsed laser ablation

Max Groenendijk; Johan Meijer

ICALEO 2005; M408https://doi.org/10.2351/1.5060548

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Intensity modulated focus: A virtual ‘tool-tip’ for femtosecond laser direct writing

K. J. Moh; D. K. Y. Low; Z. L. Li; Y. Y. Tan; X.-C. Yuan

ICALEO 2005; P518https://doi.org/10.2351/1.5060582

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Analysis of microspike array formation on tungsten surface with femtosecond laser

Etsuji Ohmura; Yasumitsu Nomura; Tomokazu Sano; Hiroyuki Hayashi; Yoshinori Hirata

ICALEO 2005; P542https://doi.org/10.2351/1.5060597

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microprocessing of various materials using femtosecond laser pulses

Udo Loeschner; Andy Engel; Steffen Weissmantel; Guenter Reisse

ICALEO 2005; P548https://doi.org/10.2351/1.5060601

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Surface Processing

Nd:YAG laser surface treatment of coating on polyimide substrate

Z. Tian; A. Kar

ICALEO 2005; M601https://doi.org/10.2351/1.5060552

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of pulsing parameters on laser ablative cleaning of copper oxides

Jie Zhang; Youneng Wang; Peng Cheng; Y. Lawrence Yao

ICALEO 2005; M602https://doi.org/10.2351/1.5060553

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Controlled laser cleaning of artworks with low resolution libs and linear correlation analysis

Marco Lentjes; Klaus Dickmann; Johan Meijer

ICALEO 2005; M603https://doi.org/10.2351/1.5060554

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser surface texturing of Ti-6Al-4V and controlled oxide formation for improving biocompatibility

N. Mirhosseini; P. L. Crouse; M. J. J. Schmidt; L. Li; M. Soufian

ICALEO 2005; M604https://doi.org/10.2351/1.5060555

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser fabricated porous coating on niti shape memory alloy

H. C. Man; S. Zhang

ICALEO 2005; M605https://doi.org/10.2351/1.5060556

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Studies of frequency-tripled ND:YAG laser in laser structuring process

Bin Zhang; Kam Cheun Yung

ICALEO 2005; P501https://doi.org/10.2351/1.5060570

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct micro laser cladding with microscale nanophased powders

O. Meier; Peter Stippler; Andreas Ostendorf; Stefan Czerner; Paolo Matteazzi

ICALEO 2005; P512https://doi.org/10.2351/1.5060577

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Silicon laser surface alloying for resistance to metal dusting

M. Ejaz; R. Prescott; Z. Liu

ICALEO 2005; P531https://doi.org/10.2351/1.5060590

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Nano-Machining & Processing

Laser synthesis of aligned ZnO nano crystals for large area UV emitter

Tatsuo Okada

ICALEO 2005; M701https://doi.org/10.2351/1.5060557

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Carbon nanotube-based coatings for laser power and energy measurements

John Lehman; Natalia Varaksa; Theo Theocharous; Anne Dillon

ICALEO 2005; M703https://doi.org/10.2351/1.5060558

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Catalyst deposition and carbon nanotubes synthesis by laser-assisted chemical vapor deposition

J. Shi; Y. F. Lu; K. Tan; X. W. Wang

ICALEO 2005; M704https://doi.org/10.2351/1.5060559

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser thin film deposition on plastic substrates using silicon nanoparticles for flexible electronics

Sachin Bet; Nathaniel Quick; Aravinda Kar

ICALEO 2005; M705https://doi.org/10.2351/1.5060560

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser sintering of silver nano-particle inks deposited by direct write technology

Jacob Colvin; Michael Carter; Jan Puszynski; James Sears

ICALEO 2005; M706https://doi.org/10.2351/1.5060561

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Continuous production and online-characterization of nanoparticles from ultrafast laser ablation and laser cracking

Stephan Barcikowski; Niko Bärsch; Michael Hustedt; Ramin Sattari; Andreas Ostendorf

ICALEO 2005; M707https://doi.org/10.2351/1.5060562

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Nanometer ablation and precision processing control using NSOM-delivered femtosecond laser pulses

Chen-Hsiung Cheng; Ming Li

ICALEO 2005; M708https://doi.org/10.2351/1.5060563

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Microfabrication in Electronics

Direct fabrication of conductive lines and resistors on insulator boards by laser micro-cladding electronic pastes

Xiaoyan Zeng; Xiangyou Li

ICALEO 2005; M801https://doi.org/10.2351/1.5060564

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser microtechnologies for passive elements of electronic circuits

Ryszard Pawlak; Franciszek Kostrubiec; Mariusz Tomczyk; Maria Walczak

ICALEO 2005; M802https://doi.org/10.2351/1.5060565

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Two-dimensional transient modeling of CO₂ laser drilling of microvias in high density flip chip substrates

Chong Zhang; Islam A.Salama; Nathaniel R. Quick; Aravinda Kar

ICALEO 2005; M803https://doi.org/10.2351/1.5060567

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cutting flexible printed circuit board with a 532NM Q-switched diode pumped solid state laser

Matt Henry; Paul Harrison; Jozef Wendland; Duncan Parsons-Karavassilis

ICALEO 2005; M804https://doi.org/10.2351/1.5060568

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser imaging system for flat panel display industry

K. R. Kim; I. T. Park; H. W. Kim; Y. W. Lee; C. H. Cho; H. S. Kang; S. K. Hong; S. B. Lee

ICALEO 2005; M807https://doi.org/10.2351/1.5060569

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser processing of solder mask

Antti Salminen; Tony Vesterinen

ICALEO 2005; P513https://doi.org/10.2351/1.5060578

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text