Volumes | ICALEO | AIP Publishing

Skip to Main Content

Skip Nav Destination

ICALEO 2004: 23rd International Congress on Laser Materials Processing and Laser Microfabrication

LASER MATERIALS PROCESSING

Fiber & Disc Lasers

Laser welding efficiency and cost: CO₂, YAG, fiber, and disc

Stanley L. Ream

ICALEO 2004; 1https://doi.org/10.2351/1.5060242

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High power high brightness industrial fiber laser technology

W. O’Neill; M. Sparkes; M. Varnham; R. Horley; M. Birch; S. Woods; A. Harker

ICALEO 2004; 301https://doi.org/10.2351/1.5060263

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Welding of aluminium and steel with high-power fibre lasers

Claus Thomy; Michael Grupp; Matthias Schilf; Thomas Seefeld; Frank Vollertsen

ICALEO 2004; 302https://doi.org/10.2351/1.5060264

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Single transversal mode yb-doped fiber laser exceeding 800 watts of output power

B. Ehlers; S. Heinemann; F. Doerfel; C. H. Liu; A. Galvanauskas

ICALEO 2004; 303https://doi.org/10.2351/1.5060265

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fiber lasers for industrial cutting applications

Vijay Kancharla

ICALEO 2004; 304https://doi.org/10.2351/1.5060266

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Disk laser enables application advancements

Timothy Morris; Kurt Mann

ICALEO 2004; 305https://doi.org/10.2351/1.5060267

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Welding & Brazing

CO₂ laser welding with double beam optics

Thomas Seefeld; Jens von Beren; Frank Vollertsen; Damian Piontek; Ulrich Dilthey

ICALEO 2004; 101https://doi.org/10.2351/1.5060186

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Pulsed Nd:YAG laser welding of Al-Si controlled expansion alloys and aluminum 4047

Geoff J Shannon

ICALEO 2004; 102https://doi.org/10.2351/1.5060187

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Formation mechanism and prevention of weld defects in full penetration laser welding of thick steel plates

Susumu Tsukamoto; Goro Arakane; Hiroshi Honda; Seiji Kuroda

ICALEO 2004; 103https://doi.org/10.2351/1.5060188

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical modeling of laser welding process for high restraint joints

D. Mark Douglass; Gonghyun Jung; Shuchi Khurana; Robert N. Yancey

ICALEO 2004; 104https://doi.org/10.2351/1.5060189

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-Strength titanium laser welding with a subsequent combination of mechanical and laser heat treatment

B. Block; H. Haferkamp; A. Ostendorf; J. Bunte; J. Huang; T. Hassel; C. Bruns

ICALEO 2004; 106https://doi.org/10.2351/1.5060190

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Heterogeneous pulsed Nd: YAG laser welding of tantalum with TA6V titanium alloy

C. Décombard; C-R. Farys; A. Masson

ICALEO 2004; 108https://doi.org/10.2351/1.5060191

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advanced micro-welding strategies with pulsed Nd:YAG lasers

Ulrich Dürr; Ronald Holtz; Matthias Jokiel; Rene Liebers; Dave Lavoie

ICALEO 2004; 109https://doi.org/10.2351/1.5060192

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser beam welding of metal-supported automotive catalytic converters

H. El Kadiri; M. Dahmen; Y. Bienvenu; T. Malot; M. Horstemeyer

ICALEO 2004; 701https://doi.org/10.2351/1.5060288

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of shielding nozzles for CO₂ laser welding

Georges Caillibotte; Francis Briand; Kharim Chouf; Eric Verna; Charles Caristan

ICALEO 2004; 704https://doi.org/10.2351/1.5060289

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Local deposition of diamond-like carbon films on tungsten tips by KrF excimer laser

J. Shi; Y. F. Lu; R. S. Cherukuri; K. K. Mendu

ICALEO 2004; 705https://doi.org/10.2351/1.5060290

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser hot-wire welding for minimizing defects

Marshall Jones; Carl Erikson; Daniel Nowak; Ganjiang Feng

ICALEO 2004; 706https://doi.org/10.2351/1.5060291

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of a new joining technology for hybrid metal aircraft structures

Rainer Kocik; Sebastian Kaschel; Michael Kreimeyer; Jörg Schumacher; Frank Vollertsen

ICALEO 2004; 707https://doi.org/10.2351/1.5060292

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of porosity formation in CO₂ laser welding of magnesium alloys

Muneharu Kutsuna; Toshiaki Kurokawa

ICALEO 2004; 708https://doi.org/10.2351/1.5060293

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fatigue life prediction of HSLA-65 welds made by laser/GMAW processes

Vince Caccese; Paul A. Blomquist; Nelson J. Orozco; Keith A. Berube

ICALEO 2004; 709https://doi.org/10.2351/1.5060294

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimization of aluminium laser welding using Taguchi and EM methods

L. Dubourg; B. Des Roches; A. Couture; D. Bouchard; H. R. Shakeri

ICALEO 2004; P501https://doi.org/10.2351/1.5060357

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advanced dual beam laser welding of zinc-coated steel sheets in lap joint configuration with zero gap at the interface

M. G. Forrest; F. Lu

ICALEO 2004; P508https://doi.org/10.2351/1.5060360

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Nd: YAG laser welding of aluminium to low carbon steel

Guillaume Sierra; Patrice Peyre; Frédéric Deschaux Beaume; David Stuart; Frédéric Coste; Gilles Fras

ICALEO 2004; P510https://doi.org/10.2351/1.5060362

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Response of thin films and substrate to micro scale laser shock peening

Youneng Wang; Hongqiang Chen; Jeffrey W. Kysar; Y. Lawrence Yao

ICALEO 2004; P511https://doi.org/10.2351/1.5060363

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of Nd-YAG laser welding of Zn-coated steel thin sheets

Remy Fabbro; Frederic Coste; Dominique Goebels; Mathieu Kielwasser

ICALEO 2004; P515https://doi.org/10.2351/1.5060365

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser brazing of steel-aluminum assembly

Alexandre Mathieu; Simone Matteï; Luis Rodriguez; Alexis Deschamps; Michel Suery; Jean-Claude Viala; Bruno Martin; Dominique Grevey

ICALEO 2004; P525https://doi.org/10.2351/1.5060374

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Methods to influence the meltpool dynamics and the element distribution in laser welding of aluminium alloys with filler wire

Markus Leimser; Andreas Ruß; Friedrich Dausinger; Helmut Hügel

ICALEO 2004; P531https://doi.org/10.2351/1.5060379

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser welding process parameter effects on hot tearing of an aerospace aluminium alloy

E. Cicală; G. Duffet; H. Andrzejewski; D. Grevey; S. Ignat

ICALEO 2004; P539https://doi.org/10.2351/1.5060383

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of gas shielding delivery mode on high power CO₂ laser welding

M. Hamadou; R. Fabbro; G. Caillibotte

ICALEO 2004; P541https://doi.org/10.2351/1.5060385

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Three dimensional robot laser welding of aluminum 6063-T6 pipes with filler wire

Kyoung-Don Lee; Ki-Young Park; In-Chul Ha

ICALEO 2004; P545https://doi.org/10.2351/1.5060389

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Pulsed laser welding of metal-polymer sandwich materials using pulse shaping

Heather Gower; Raph Pieters; Ian Richardson

ICALEO 2004; P548https://doi.org/10.2351/1.5060390

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The comparison of the effects of welding parameters on weld quality and hardness of T-butt joints welded with CO₂ laser, Nd:YAG laser and CO₂ laser-GMA hybrid welding

Anna Fellman; Antti Salminen; Veli Kujanpää

ICALEO 2004; P560https://doi.org/10.2351/1.5060397

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid Laser Welding

Laser hybrid welding of advanced high strength steels for potential automotive applications

Craig Bratt; Jack Noel

ICALEO 2004; 201https://doi.org/10.2351/1.5060248

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Stabilization of pulsed gmaw in titanium welds with low-power lasers

Paul E. Denney; Brandon W. Shinn; P. Mike Fallara

ICALEO 2004; 202https://doi.org/10.2351/1.5060249

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Magnetic stirring during laser welding of aluminium

Frank Vollertsen; Claus Thomy

ICALEO 2004; 203https://doi.org/10.2351/1.5060250

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid Nd:YAG laser-mag welding of thick section steel with adaptive control

Steve G Shi; Paul Hilton; Steve Mulligan; Geert Verhaeghe

ICALEO 2004; 205https://doi.org/10.2351/1.5060251

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Sensing for monitoring of the laser-GMAW hybrid welding process

D. Travis; G. Dearden; K. G. Watkins; E. W. Reutzel; R. P. Martukanitz; J. F. Tressler

ICALEO 2004; 206https://doi.org/10.2351/1.5060252

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of ambient atmosphere on penetration geometry in laser and hybrid welding

Yasuaki Naito; Masami Mizutani; Seiji Katayama; Han-Sur Bang

ICALEO 2004; 207https://doi.org/10.2351/1.5060253

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Real-time control of laser-hybrid welding using weld quality attributes

Nelson J. Orozco; Paul A. Blomquist; Robert B. Rudy; Steven R. Webber

ICALEO 2004; 208https://doi.org/10.2351/1.5060254

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser/TIG hybrid welding of pot for induction heater

Claus Bagger; Lars de Caldas Sondru; p Flemming Ove Olsen

ICALEO 2004; 209https://doi.org/10.2351/1.5060255

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

CO₂ laser beam welding of aluminum alloys with electric current addition

R. S. Xiao; T. C. Zuo; G. Ambrosy; H. Hügel

ICALEO 2004; P521https://doi.org/10.2351/1.5060370

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Penetration and welding phenomena in YAG laser-mig hybrid welding of aluminum alloy

Satoru Uchiumi; Jing-bo Wang; Seiji Katayama; Masami Mizutani; Toshinori Hongu; Kouji Fujii

ICALEO 2004; P530https://doi.org/10.2351/1.5060378

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Investigation of laser-induced material removal of stainless steel at the super-micron level

Ludwig A. Kern; Edward W. Reutzel; Christopher A. Sills

ICALEO 2004; P538https://doi.org/10.2351/1.5060382

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Forming

Line induced thermal strain forming

David Peck; Gerald Jones

ICALEO 2004; 401https://doi.org/10.2351/1.5060268

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Characteristics of parallel irradiations in laser forming of stainless steel

J. Pennuto, Jr.; J. Choi

ICALEO 2004; 402https://doi.org/10.2351/1.5060272

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical and experimental investigation of microstructure evolution and mechanical behavior of steel in laser forming

Yajun Fan; Zhishang Yang; Peng Cheng; Keith Egland; Y. Lawrence Yao

ICALEO 2004; 403https://doi.org/10.2351/1.5060273

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser forming: Industrial applications

Wenwu Zhang; Judson Marte; David Mika; Michael Graham; Brian Farrell; Marshall Jones

ICALEO 2004; 404https://doi.org/10.2351/1.5060274

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Iterative 3D laser forming of continuous surfaces

S. P. Edwardson; A. J. Moore; E. Abed; R. McBride; P. French; D. P. Hand; G. Dearden; J. D. C. Jones; K. G. Watkins

ICALEO 2004; 405https://doi.org/10.2351/1.5060275

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Utilising laser forming as a novel way of forming dual phase steel for automotive components

Annelize Els-Botes; Patrick J. McGrath

ICALEO 2004; 406https://doi.org/10.2351/1.5060276

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effects of multi-wavelength irradiation of polymers on the ablation threshold and ablation rate

Thorsten Temme; Andreas Ostendorf; Uwe Stute

ICALEO 2004; P509https://doi.org/10.2351/1.5060361

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of a combined joining-forming process for aluminum-steel joints

Michael Kreimeyer; Florian Wagner; Gerd Sepold

ICALEO 2004; P519https://doi.org/10.2351/1.5060368

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of 2D and 3D laser forming strategies for thin section materials using scanning optics

K. Bartkowiak; G. Dearden; S. P. Edwardson; K. G. Watkins

ICALEO 2004; P559https://doi.org/10.2351/1.5060396

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Polymer Joining Processes

Laser beam welding of thermoplastics parameter influence on weld seam quality - Experiments and modeling

Ulrich-Andreas Russek; Mirko Aden; Jens Poehler; Andre Palmen; Henrik Staub

ICALEO 2004; 501https://doi.org/10.2351/1.5060277

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

New laser systems for laser materials processing

Waldemar Sokolowski; Peter Bruns; Wieland Hill; Alexei Mikhailow; Maxim Darscht; Vitalij Lissotschenko

ICALEO 2004; 502https://doi.org/10.2351/1.5060278

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of simultaneous laser welding process applied to thermoplastic polymers

Stephane Abed; Wolfgang Knapp; Martin Traub; Dieter Hoffmann; Reinhart Poprawe; Peter Loosen

ICALEO 2004; 503https://doi.org/10.2351/1.5060279

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Preliminary investigations of laser welding of plastics in mass-production

Anssi Jansson; Saara Kouvo; Veli Kujanpää

ICALEO 2004; 504https://doi.org/10.2351/1.5060280

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Dynamic melt pool behaviour during laser transmission welding of thermoplastics

Heinz Haferkamp; Alexander von Busse; Mireia Fargas; Jens Bunte

ICALEO 2004; 505https://doi.org/10.2351/1.5060281

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of surface tension on melt ejection during micron-size laser spot welding

V. V. Semak; G. A. Knorovsky; D. O. MacCallum

ICALEO 2004; P544https://doi.org/10.2351/1.5060388

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Deposition Processes

Chromium thin film ablation with double pulse of femtosecond laser

Etsuji Ohmura; Tomohiro Okamoto; Seiji Fujiwara; Tomokazu Sano; Isamu Miyamoto

ICALEO 2004; 601https://doi.org/10.2351/1.5060282

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Computer generated holographic optics used in laser powder fusion

James Kell; John Tyrer; Rebecca Higginson; Rachel Thomson; John Jones; Sara Noden

ICALEO 2004; 603https://doi.org/10.2351/1.5060283

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fuzzy model and compact fuzzy model identification of laser cladding process

Majid Khadem Sameni; Ehsan Toyserkani; Amir Khajepour

ICALEO 2004; 604https://doi.org/10.2351/1.5060284

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The use of reactive gas shielding for production of hard coatings by laser surface alloying

S. S. Babu; S. M. Kelly; M. Murugananth; R. P. Martukanitz

ICALEO 2004; 606https://doi.org/10.2351/1.5060285

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical simulation of multi-material laser cladding by coaxial powder injection

Huan Qi; Hyungson Ki; Jyoti Mazumder

ICALEO 2004; 607https://doi.org/10.2351/1.5060286

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Combined wire and powder feeding laser direct metal deposition for rapid prototyping

Waheed Ul Haq Syed; Andrew J. Pinkerton; Lin Li

ICALEO 2004; 609https://doi.org/10.2351/1.5060287

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Comparison between continuous wave and pulsed Nd:YAG laser cladding of stellite 6

S. Sun; M. Brandt

ICALEO 2004; 901https://doi.org/10.2351/1.5060303

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser surface treatment for inhibition of metal dusting

K. T. Voisey; Z. Liu; F. H. Stott

ICALEO 2004; 902https://doi.org/10.2351/1.5060304

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Clack behavior and microstructure of clad layer in laser cladding of stellite 6 and WC powder

Munaharu Kutsuna; Guojian Xu

ICALEO 2004; 904https://doi.org/10.2351/1.5060305

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Application of laser aided manufacturing process (LAMP) for functionally graded thermal barrier coatings

Yashodhan Joshi; Vinay Kadekar; Frank Liou

ICALEO 2004; 905https://doi.org/10.2351/1.5060306

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Formation and Properties of TiO₂-ZrO₂-Zn layers by using high-power diode laser

Junji Morimoto; Tetuya Onoda; Nobuyuki Abe; Masahiro Tukamoto

ICALEO 2004; 906https://doi.org/10.2351/1.5060307

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study on laser cladding and tig cladding of stellite6 powder on martensitic stainless steel

Munaharu Kutsuna; Guojian Xu; Katsusige Yamada

ICALEO 2004; 907https://doi.org/10.2351/1.5060308

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hardness and wear behaviour of TiC-Al/Si composite coatings made by laser cladding onto AL substrate

L. Dubourg; F. Hlawka; A. Cornet

ICALEO 2004; 908https://doi.org/10.2351/1.5060309

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The influence of powder parameters on laser cladding process

Janne Nurminen; Jonne Näkki; Petri Vuoristo

ICALEO 2004; P507https://doi.org/10.2351/1.5060359

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends

Andrew J Pinkerton; Waheed Ul Haq Syed; Lin Li

ICALEO 2004; P514https://doi.org/10.2351/1.5060364

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

In-depth study of mechanical and physico-chemical properties of calcium phosphate coatings obtained by laser surface cladding

F. Lusquiños; J. Pou; M. Boutinguiza; F. Quintero; R. Soto; B. León; M. Pérez-Amor

ICALEO 2004; P523https://doi.org/10.2351/1.5060372

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modeling & Simulation

Effects of scanning schemes on laser tube bending

Jie Zhang; Peng Cheng; Wenwu Zhang; Michael Graham; Jerry Jones; Marshall Jones; Y. Lawrence Yao

ICALEO 2004; 801https://doi.org/10.2351/1.5060295

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Monitoring of keyhole behavior in deep penetration laser welding

Hiroshi Honda; Susumu Tsukamoto; Isao Kawaguchi; Goro Arakane

ICALEO 2004; 802https://doi.org/10.2351/1.5060296

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modelling the effects of laser beam geometry on laser surface heating of metallic materials

Shakeel Safdar; Lin Li; M. A. Sheikh; M. J. Schmidt

ICALEO 2004; 803https://doi.org/10.2351/1.5060297

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

3D simulation of laser additive manufacturing

Anil Chaudhary; Carl Lombard

ICALEO 2004; 805https://doi.org/10.2351/1.5060298

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effects of electromagnetic force on melt flow and weld shape in laser keyhole welding

Jun Zhou; Hai-Lung Tsai; Pei-Chung Wang

ICALEO 2004; 806https://doi.org/10.2351/1.5060299

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Investigation of mixing phenomena in hybrid laser-MIG keyhole welding

Jun Zhou; Hai-Lung Tsai; Pei-Chung Wang

ICALEO 2004; 807https://doi.org/10.2351/1.5060300

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Modeling of frictions on keyhole walls during vapor flow in laser welding

El-Hachemi Amara; Rémy Fabbro; Louisa Achab; Farida Hamadi; Nawal Mebani

ICALEO 2004; 808https://doi.org/10.2351/1.5060301

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of keyhole behavior for full penetration Nd-YAG cw laser welding

Rémy Fabbro; Sonia Slimani; Fréderic Coste; Francis Briand

ICALEO 2004; 809https://doi.org/10.2351/1.5060302

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Numerical simulation of thermal branding of polymers with infrared laser

J. C. Kneip; A. Han; S. Matteï; D. Grevey

ICALEO 2004; 1102https://doi.org/10.2351/1.5060193

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Calibration of bending and membrane strains for iterative laser forming of non-developable surfaces

R. McBride; M. Gross; A. J. Moore; D. P. Hand; J. D. C. Jones

ICALEO 2004; 1104https://doi.org/10.2351/1.5060194

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Finite element modelling of laser peening and laser peen forming of materials

Patrice Peyre; Marie-Amélie Petit; Cyril Bolis; Eric Bartnicki; Rémy Fabbro; Iheb Chaieb; Chedly Braham

ICALEO 2004; 1106https://doi.org/10.2351/1.5060195

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A model of material removal mechanisms in pulsed laser cutting of ceramics

Félix Quintero; Fernando Varas; J. Pou; F. Lusquiños; M. Boutinguiza; R. Soto; M. Pérez-Amor

ICALEO 2004; 1107https://doi.org/10.2351/1.5060196

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Application of control volume method to modelling of laser cutting striation formations

Lee Mein Wee; Lin Li

ICALEO 2004; 1108https://doi.org/10.2351/1.5060197

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Temperature distribution in optical trepanning

D. Zeng; W. P. Latham; A. Kar

ICALEO 2004; 1109https://doi.org/10.2351/1.5060198

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A phase-field model for simulation of the laser cladding process using a discontinuous viscosity variable and its approximation by finite element method

Aaron Naber; Richard Martukanitz

ICALEO 2004; P536https://doi.org/10.2351/1.5060380

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Sensing, Monitoring & Control

Practical applications of in-process monitoring for laser processes - Not only for single welds and common materials

Joerg Beersiek; Thomas Devermann; Klaus Behler

ICALEO 2004; 1001https://doi.org/10.2351/1.5060179

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of the optical emissions during Nd:YAG laser welding of AA5182

B. J. Aalderink; R. G. K. M. Aarts; J. B. Jonker; J. Meijer

ICALEO 2004; 1002https://doi.org/10.2351/1.5060180

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Monitoring of high power diode laser sheet metal welding

Steffen Bonss; Udo Karsunke; Eckhardt Beyer; Karl-Hermann Richter

ICALEO 2004; 1003https://doi.org/10.2351/1.5060181

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Calorimetric system for measurement of net power in laser and arc welding and cladding

Valdemar Malin; Federico M. Sciammarella

ICALEO 2004; 1005https://doi.org/10.2351/1.5060182

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser ultrasonic inspection of laser cladded 316LSS and TI-6-4

Marvin Klein; James Sears

ICALEO 2004; 1006https://doi.org/10.2351/1.5060183

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of process monitoring devices on direct manufacturing by laser cladding for aeronautic components

T. Mutabue; C Colin; T. Malot; P Aubry

ICALEO 2004; 1007https://doi.org/10.2351/1.5060184

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Process control of laser keyhole welding

Fabrice Bardin; Adolfo Cobo; Jose M. Lopez-Higuera; Olivier Collin; Pascal Aubry; Thierry Dubois; Mats Högström; Per Nylen; Peter Jonsson; Julian D. C. Jones; Duncan P. Hand

ICALEO 2004; 1008https://doi.org/10.2351/1.5060185

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The influence of geometric errors in the nominal robot model on sensor-guided robotic laser welding

M. W. de Graaf; R. G. K. M. Aarts; J. Meijer; J. B. Jonker

ICALEO 2004; 1301https://doi.org/10.2351/1.5060207

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Weld optimization in the airbag inflator industry using the six sigma methodology

Max Hailey; Mike Sharp; Eric Lussier

ICALEO 2004; 1302https://doi.org/10.2351/1.5060208

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Camera based process monitoring of the CO₂ and Nd:YAG laser welding process: Experiences from applications in the automotive industry

Markus Kogel-Hollacher; Christoph Dietz; Thomas Nicolay; Axel Kattwinkel; Thomas Herzinger; Berthold Kessler; Bert Schürmann; Matthias Schmidt; Jürgen Müller-Borhanian

ICALEO 2004; 1303https://doi.org/10.2351/1.5060209

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Spatially resolved on-line monitoring during laser beam welding of steel and aluminum

Jürgen Müller-Borhanian; Christoph Deininger; Friedrich H. Dausinger; Helmut Hügel

ICALEO 2004; 1306https://doi.org/10.2351/1.5060210

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Experimental and simulation study of laser aided deposition process using image and temperature sensors

K. Phatak; L. Han; F. W. Liou

ICALEO 2004; 1307https://doi.org/10.2351/1.5060211

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of trinocular optical ccd-based detectors for real-time measurement of clad geometry

Ehsan Toyserkani; Amir Khajepour; Majid Khadem Sameni

ICALEO 2004; 1308https://doi.org/10.2351/1.5060212

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Real-time temperature measurement for process monitoring of laser conduction welding

Fabrice Bardin; Roy McBride; Andrew Moore; Stephen Morgan; Stewart Williams; Julian D. C. Jones; Duncan P. Hand

ICALEO 2004; 1309https://doi.org/10.2351/1.5060213

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Diode Laser Processing

High power diode laser beam scanning in multi-kilowatt range

M. Seifert; S. Bonß; B. Brenner; E. Beyer

ICALEO 2004; 1201https://doi.org/10.2351/1.5060199

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of material thickness and joint configuration on high power diode laser welding of steel

Antti Salminen; Anna Fellman; Veli Kujanpää

ICALEO 2004; 1202https://doi.org/10.2351/1.5060200

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Transformation hardening with high power diode laser systems using single and multiple tracks

Guy Claus

ICALEO 2004; 1203https://doi.org/10.2351/1.5060201

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A basic study on the high power diode laser welding of a titanium alloy

Francesco Curcio; Fabrizio Memola Capece Minutolo; Andrzej Klimpel; Aleksander Lisiecki

ICALEO 2004; 1204https://doi.org/10.2351/1.5060202

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct diode laser system requirements for long life micro channel coolers

John M. Haake; Brian Faircloth

ICALEO 2004; 1205https://doi.org/10.2351/1.5060203

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimisation of the laser-based grout removal

K. Minami; M. J. J. Schmidt; L. Li

ICALEO 2004; 1206https://doi.org/10.2351/1.5060204

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A high power diode laser (HPDL)-based technique for the bonding of composite patches to aluminium alloys on various military aircraft

Jonathan Lawrence

ICALEO 2004; 1207https://doi.org/10.2351/1.5060205

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Study of titanium sheets HPDL welding phenomenon

Andrzej Klimpel; Aleksander Lisiecki; Damian Janicki; Francesco Curcio; Fabrizio Memola Capece Minutolo; Tadeusz Kruczek

ICALEO 2004; 1208https://doi.org/10.2351/1.5060206

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Novel Processes

The influence of spot overlap and laser flence on the high cycle fatigue (HCF) strength of aircraft engine fan blades

Magdi N. Azer; Doug Scheidt

ICALEO 2004; 1401https://doi.org/10.2351/1.5060214

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Evaluation of high power ytterbium fiber lasers for rock cutting and removal applications

Samih Batarseh; Brian C. Gahan; Bhargav Sharma; Sherif Gowelly

ICALEO 2004; 1402https://doi.org/10.2351/1.5060215

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser decontamination R&D in South Africa

W. Klopper; D. E. Roberts; S. L. Pityana

ICALEO 2004; 1403https://doi.org/10.2351/1.5060216

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Dynamic absorption of a powder layer

R. P. Martukanitz; R. M. Melnychuk; M. S. Stefanski; S. M. Copley

ICALEO 2004; 1404https://doi.org/10.2351/1.5060217

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser paint stripping process Emissions: Q-switched vs. pulsed Nd:YAG laser

E. W. Reutzel; J. M. Keay; C. A. Sills

ICALEO 2004; 1405https://doi.org/10.2351/1.5060218

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Rock perforation by pulsed Nd:YAG laser

Zhiyue Xu; Claude B. Reed; Ramona Graves; Richard Parker

ICALEO 2004; 1406https://doi.org/10.2351/1.5060219

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-assisted writing of copper films through Nd:YAG laser radiation

R. Martukanitz; R. Harster; D. Conklin; S. Wagner

ICALEO 2004; 1801https://doi.org/10.2351/1.5060235

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser pressure welding of AZ31 magnesium and A6061 aluminum

Kouji Nishimoto; Hiroo Fujii; Ken Atagi; Masashi Oumi; Naoki Sei; Seiji Katayama

ICALEO 2004; 1802https://doi.org/10.2351/1.5060236

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser spallation of rocks for oil well drilling

Zhiyue Xu; Claude B. Reed; Richard Parker; Ramona Graves

ICALEO 2004; 1803https://doi.org/10.2351/1.5060237

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of texturing by laser Nd:YAG in the tribological behavior of a chromium electro-plated coating on carbon steel

Juliano A. Araújo; Adilson R. da Costa

ICALEO 2004; 1804https://doi.org/10.2351/1.5060238

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser processing of concrete structures

P. E. Denney; B. W. Shinn; P. M. Fallara; T. C. Huang; J. Eastman; G. E. Johnston; B. S. Johnson

ICALEO 2004; 1805https://doi.org/10.2351/1.5060239

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Adsorbed on the adsorbed protein layer formed on a laser modified zirconia bioceramic

Liang Hao; Jonathan Lawrence

ICALEO 2004; P506https://doi.org/10.2351/1.5060358

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser adhesion test: A tool for bond strength test using high-pressure shock induced by laser

Laurent Berthe; Cyril Bolis; Michel Boustie; Michel Arrigoni; Michel Jeandin; Sophie Barradas

ICALEO 2004; P518https://doi.org/10.2351/1.5060367

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of diode laser irradiation on ferroelectrics properties of PZT fimls produced by aerosol depositon method

Masahiro Tsukamoto; Masakazu Mori; So Baba; Nobuyuki Abe; Jun Akedo

ICALEO 2004; P527https://doi.org/10.2351/1.5060376

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid laser-microwave sintering of zirconia-base ceramics

Ramesh Peelamedu; Andrzej Badzian; Rustum Roy; Stephen M. Copley

ICALEO 2004; P556https://doi.org/10.2351/1.5060395

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Industrial Process Implementation

Laser drilling of TBC superalloy

M. Naeem

ICALEO 2004; 1501https://doi.org/10.2351/1.5060220

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Integrated laser system for heat treatment with high power diode laser

J. Hannweber; S. Bonss; B. Brenner; E. Beyer

ICALEO 2004; 1503https://doi.org/10.2351/1.5060221

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cladding of the titanium alloy TI6242 to restore damaged blades

Karl-Hermann Richter; Sven Orban; Steffen Nowotny

ICALEO 2004; 1506https://doi.org/10.2351/1.5060222

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cladding and primer application as a one-step process

Eric Stiles; Christian Walz; Eckhard Beyer

ICALEO 2004; 1507https://doi.org/10.2351/1.5060223

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Environmental & Safety

Laser safety officer (LSO) responsibilities

Jay Jamali, CSP, CHMM, CHCM EHS Director

ICALEO 2004; 1601https://doi.org/10.2351/1.5060224

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Protection of the environment and saving costs using electronic nose during laser material processing of polymers and wood composites

Heinz Haferkamp; Andreas Ostendorf; Ramin Sattari; Stephan Barcikowski; Jens Bunte

ICALEO 2004; 1602https://doi.org/10.2351/1.5060225

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct Fabrication Processes

Three dimensional transient finite element analysis for solidification microstructure and thermal stresses in multi-pass laser aided dmd process

Suhash Ghosh; Joohyun Choi

ICALEO 2004; 1702https://doi.org/10.2351/1.5060226

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Analysis of the powder flow characteristics for the direct laser deposition process

Yogesh Thakar; Heng Pan; Frank Liou

ICALEO 2004; 1703https://doi.org/10.2351/1.5060227

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Direct diode laser deposition of titanium alloys

I. R. Pashby; S. H. Mok; J. Folkes

ICALEO 2004; 1704https://doi.org/10.2351/1.5060228

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Diode pumped fiber laser in direct metal laser sintering (DMLS) process

T. Syvänen; Martin Heugel; Robert Domröse

ICALEO 2004; 1705https://doi.org/10.2351/1.5060229

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser consolidation of TI-6AL-4V alloy to build functional net-shape airfoils with embedded cooling channels

Lijue Xue; Andre Theriault; Mahmud-Ul Islam; Marshall Jones; Hsin-Pang Wang

ICALEO 2004; 1706https://doi.org/10.2351/1.5060230

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Adaptive dmd process using a fuzzy logic-based controller

Yusheng Hua; Joohyun Choi

ICALEO 2004; 1707https://doi.org/10.2351/1.5060231

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optimisation of layer height control in direct laser deposition

E. Fearon; K. G. Watkins

ICALEO 2004; 1708https://doi.org/10.2351/1.5060232

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Metal laminated tooling - A quick and flexible tooling concept

Thomas Himmer; Anja Techel; Steffen Nowotny; Eckhard Beyer

ICALEO 2004; 1709https://doi.org/10.2351/1.5060233

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Hybrid manufacturing process for rapid high performance tooling combining high speed milling and laser cladding

Michael Kerschbaumer; Georg Ernst

ICALEO 2004; 1710https://doi.org/10.2351/1.5060234

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Results on laser sintering system for direct manufacturing of metallic or ceramic components

N. Coulon; P. Aubry

ICALEO 2004; P543https://doi.org/10.2351/1.5060387

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Optics

Intelligent self – Monitoring laser optics: Straight communication between optical element and NC controller

Klaus G. Hänsel; Manfred Berger; Martin Benzing

ICALEO 2004; 1901https://doi.org/10.2351/1.5060240

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effective focusing optics for stack-bar laser diodes

H. Imai; M. Kido; T. Sakai; A. Sugihashi; H. Hamamura; S. Yamaguchi; K. Minamida; N. Hamada

ICALEO 2004; 1903https://doi.org/10.2351/1.5060241

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Near field intensity and mode confinement analysis in gan based blue laser diode at 507 nm wavelength

D. S. Patil; Kundan Dhande; E. P. Samuel; M. P. Bhole; S. A. Gaikwad; D. K. Gautam

ICALEO 2004; P517https://doi.org/10.2351/1.5060366

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Delivery of high energy light through pbg fiber for laser machining

Jonathan D. Shephard; B. J. Mangan; Julian D. C. Jones; Geraud Bouwmans; Phillip St. J. Russell; Jonathan C. Knight; Duncan P. Hand

ICALEO 2004; P563https://doi.org/10.2351/1.5060399

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser Surface Treatment & Alloying

Laser alloyed hot-work tool steels with WC carbides

Leszek A. Dobrzański; Mirosław Bonek; Eugeniusz Hajduczek; Andrzej Klimpel

ICALEO 2004; 2001https://doi.org/10.2351/1.5060243

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Effect of processing parameters on the microstructure and hardness of laser transformation hardened tool steel

Henrikki Pantsar; Veli Kujanpää

ICALEO 2004; 2002https://doi.org/10.2351/1.5060244

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Magnesium alloys laser (Nd:YAG) cladding with side injection of aluminium based powder

Sorin Ignat; Pierre Sallamand; Dominique Grevey; Michel Lambertin

ICALEO 2004; 2004https://doi.org/10.2351/1.5060245

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser modification of the wettability characteristics of a biological stainless steel

Jonathan Lawrence; Liang Hao

ICALEO 2004; 2005https://doi.org/10.2351/1.5060246

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fundamental understanding of corrosion performances of laser-melted metallic alloys

Z. Liu; P. H. Chong; P. Skeldon; P. A. Hilton; J. T. Spencer

ICALEO 2004; 2007https://doi.org/10.2351/1.5060247

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Diode laser surface treatment of magnesium alloy AZ61

Ghazanfar Abbas; Lin Li; Zhu Liu; Waheed Ul Haq Syed

ICALEO 2004; P520https://doi.org/10.2351/1.5060369

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Electrochemical potentiokinetic reactivation study of laser-surface-melted 3CR12 steel

P. H. Chong; Z. Liu; P. Skeldon; P. A. Hilton; R. C. Newman

ICALEO 2004; P537https://doi.org/10.2351/1.5060381

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Use of DIC imaging in examining phase transformations in diode laser surface hardening

Henrikki Pantsar

ICALEO 2004; P564https://doi.org/10.2351/1.5060400

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cutting & Drilling Processes & Systems

Laser cutting of paper

Jari Hovikorpi; Petri Laakso; Heidi Malmberg; Veli Kujanpää; Nina Miikki

ICALEO 2004; 2103https://doi.org/10.2351/1.5060256

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Carbon fiber reinforced polymers (CFRP) Nd:YAG laser machining

Antonio J. García; M. Pilar Villar; Daniel Araújo; J. Fabián García-Motolinia; Elisabet Ribera; Carlos Díez; Clarisa López-Gascón; Carlos Estepa; José I. Peña; Rafael García

ICALEO 2004; 2104https://doi.org/10.2351/1.5060257

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micromachining of thin metals

R. Schaeffer; G. Kardos; O. Derkach

ICALEO 2004; 2105https://doi.org/10.2351/1.5060258

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The effect of gas jet and melt flow on laser drilling of thermal barrier coated nickel alloys

H. K. Sezer; Lin Li; P. Byrd

ICALEO 2004; 2106https://doi.org/10.2351/1.5060259

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cutting of silica glasses by using the controlled fracture technique

Chwan-Huei Tsai; Bor-Chang Lin

ICALEO 2004; 2107https://doi.org/10.2351/1.5060260

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Advances in process control for laser drilling

Terry L. VanderWert; Mark W. Barry

ICALEO 2004; 2108https://doi.org/10.2351/1.5060261

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Mechanism of dross formation in laser cutting

Takeji Arai; Noritaka Asano

ICALEO 2004; 2110https://doi.org/10.2351/1.5060262

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Cutting of mullite-alumina ceramic plates with CO₂ laser

F. Quintero; J. Pou; F. Lusquiños; M. Boutinguiza; R. Soto; M. Pérez-Amor; F. Wagner

ICALEO 2004; P522https://doi.org/10.2351/1.5060371

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser cutting of pigment coated boards

Heidi Malmberg; Petri Laakso; Jari Hovikorpi; Veli Kujanpää; Nina Miikki; Minna Kurittu

ICALEO 2004; P524https://doi.org/10.2351/1.5060373

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-drilling through plasma-sprayed thermal barrier coatings on nickel based superalloys

I. R. Pashby; C. A. McNally

ICALEO 2004; P526https://doi.org/10.2351/1.5060375

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Parametric study of drilling with new innovative laser source: Application to percussion regime

Matthieu Schneider; Rémy Fabbro; Laurent Berthe; Laeticia Landais; Mariette Nivard; Patricia Laurens

ICALEO 2004; P540https://doi.org/10.2351/1.5060384

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Melt ejection during laser drilling

D. F. de Lange; A. Schoonderbeek; J. Meijer

ICALEO 2004; P542https://doi.org/10.2351/1.5060386

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

LASER MICROFABRICATION CONFERENCE PAPERS

Laser-Nanofabrication

Laser nanomachining and nanoprocessing ñ frontiers beyond the optical diffraction limit

Y. F. Lu

ICALEO 2004; M101https://doi.org/10.2351/1.5060310

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High resolution sub-diffraction material processing with femtosecond lasers

Jürgen Koch; Frank Korte; Carsten Fallnich; Andreas Ostendorf; Boris N. Chichkov

ICALEO 2004; M103https://doi.org/10.2351/1.5060311

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Nanostructure fabrication using pulsed lasers combined with scanning probes

David J. Hwang; Anant Chimmalgi; Costas P. Grigoropoulos

ICALEO 2004; M104https://doi.org/10.2351/1.5060312

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Three-dimensional micro-and nanofabrication of photosensitive materials by two-photon polymerization with femtosecond laser pulses

Aleksandr Ovsianikov; Jesper Serbin; Carsten Fallnich; Andreas Ostendorf; Boris Chichkov

ICALEO 2004; M105https://doi.org/10.2351/1.5060313

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser based fabrication of micro and nano-structures using sacrificial layers

Andrew. J. Lee; Michael. J. Withford; Judith. M. Dawes

ICALEO 2004; M106https://doi.org/10.2351/1.5060314

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser-assisted nanoimprinting of self-assembled single size and binary-size nanoparticles on silicon and aluminum substrates

L. P. Li; Y. F. Lu; D. W. Doerr; D. R. Alexander

ICALEO 2004; P550https://doi.org/10.2351/1.5060392

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fabrication of 3-D photonic bandgap structures on silicon using laser assisted-nanoimprinting

K. K. Mendu; Y. F. Lu; L. P. Li; D. W. Doerr; D. R. Alexander

ICALEO 2004; P554https://doi.org/10.2351/1.5060393

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Precise Drilling & Cutting

Investigation of movement of the melting front to analyse the formation of hole geometry during single pulse drilling with Nd:YAG laser radiation

Lena Trippe; Jens Willach; Jochen Petereit; Ernst Wolfgang Kreutz; Wolfgang Schulz; Reinhart Poprawe

ICALEO 2004; M201https://doi.org/10.2351/1.5060315

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Influence of micro supersonic jets on micro percussion drilling of 316L stainless steel using nanosecond 355nm laser radiation

A. H. Khan; W. O’Neill; L. Tunna; C. J. Sutcliffe

ICALEO 2004; M202https://doi.org/10.2351/1.5060316

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser choices for micromachining: Drilling speed and quality comparison

L. Migliore; G. Kardos; A. Ozkan; O. Derkach; R. Schaeffer; C. Dunsky

ICALEO 2004; M203https://doi.org/10.2351/1.5060317

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Precision micro cutting of thin steel plate with newly designed laval nozzle by pulsed YAG laser

Yasuhiro Okamoto; Yoshiyuki Uno; Masayoshi Hosogaya; Naoki Miyanagi

ICALEO 2004; M204https://doi.org/10.2351/1.5060318

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Thermal stress analysis on laser scribing of glass

Koji Yamamoto; Noboru Hasaka; Hideki Morita; Etsuji Ohmura

ICALEO 2004; M205https://doi.org/10.2351/1.5060319

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

The development of laser microprocessing in China

Zuo Tiechuan; Chen Jimin

ICALEO 2004; M206https://doi.org/10.2351/1.5060320

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Chemical Assisted Laser Processing

3D microstructuring and selective metallization of photosensitive glass by photochemical reaction using femtosecond laser

Koji Sugioka; Ya Cheng; Katsumi Midorikawa

ICALEO 2004; M302https://doi.org/10.2351/1.5060321

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fabrication of metallic micro channels of high aspect ratio using laser-assisted thermochemical wet etching

Seungwoo Son; Sungho Jeong

ICALEO 2004; M303https://doi.org/10.2351/1.5060322

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Micro-mirror steering of diode array beams

K. H. Leong; M. A. Dugan; R. W. Wallace; A. A. Said; R. Shaffer; Ph. Bado; B. D. Wright

ICALEO 2004; M305https://doi.org/10.2351/1.5060323

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser doping of silicon carbon and pin diode fabrication

Z. Tian; N. R. Quick; A. Kar

ICALEO 2004; M306https://doi.org/10.2351/1.5060324

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser direct write for release of SiO₂ MEMS and nano-scale devices with an eye to intergration with standard Si based electronics fabrication

Meg Abraham; Henry Helvajian

ICALEO 2004; M307https://doi.org/10.2351/1.5060325

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Ablation

Photographic laser absorption spectroscopy used for 3D-resolved measurement of the laser ablation plasma

Peng Li; Jyoti Mazumder

ICALEO 2004; M401https://doi.org/10.2351/1.5060326

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser ablation with water micro-drop for dicing of silicon wafer

Kouki Shimizu; Kunimitsu Takahashi; Hiroshi Morikazu; Nobumori Ogoshi; Koichi Takeyama; Yoji Wakayama; Tetsuro Obara

ICALEO 2004; M404https://doi.org/10.2351/1.5060327

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

A study of direct writing conductive lines by laser etching

Junpeng Lei; Xiaoyan Zeng; Huiling Li; Yaobing Li

ICALEO 2004; M405https://doi.org/10.2351/1.5060328

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser processing of PCB

Antti Salminen; Tony Vesterinen

ICALEO 2004; M408https://doi.org/10.2351/1.5060329

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micro machining - tool check: Camera-based focal diagnostics in the 10 microns range

Reinhard Kramer; Harald Schwede; Volker Brandl; Klaus Hänsel; Mike Klos

ICALEO 2004; M409https://doi.org/10.2351/1.5060330

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microjoining

Micro welding with pulsed single mode fiber lasers

Klaus F. Kleine; William J. Fox; Ken G. Watkins

ICALEO 2004; M501https://doi.org/10.2351/1.5060331

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micro welding of dissimilar metals

Michael Schmidt; Bernd Jahrsdörfer; Ihor Mys; Gerd Eßer

ICALEO 2004; M502https://doi.org/10.2351/1.5060332

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microwelding using a Q-switched laser

D. O. MacCallum; G. A. Knorovsky; B. M. Nowak-Neely

ICALEO 2004; M503https://doi.org/10.2351/1.5060333

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Microclear – A novel method for diode laser welding of transparent micro structured polymer chips

Thomas Klotzbuecher; Torsten Braune; Marion Ritzi; Klaus-Stephan Drese; Ulrich Teubner

ICALEO 2004; M504https://doi.org/10.2351/1.5060334

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Fabrication of a miniaturized dewar module

Arvind Bharti

ICALEO 2004; M505https://doi.org/10.2351/1.5060335

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Pulse forming at laser beam micro welding

Kilian Klages; Jens Gedicke; Alexander Olowinsky

ICALEO 2004; M506https://doi.org/10.2351/1.5060336

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Micromachining with high beam quality and high pulse frequency Nd: YAG laser

M. Naeem

ICALEO 2004; M507https://doi.org/10.2351/1.5060337

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Joining challenges in the packaging of biomems

H. J. Herfurth; R. Witte; S. Heinemann; G. Newaz; A. Mian; D. Georgiev; G. Auner

ICALEO 2004; M508https://doi.org/10.2351/1.5060338

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Processing Using Ultrashort Laser Pulses

Chromium thin film ablation with double pulse of femtosecond laser

Etsuji Ohmura; Tomohiro Okamoto; Seiji Fujiwara; Tomokazu Sano; Isamu Miyamoto

ICALEO 2004; M601https://doi.org/10.2351/1.5060339

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

An improved two-temperature model for metal thin film heating by femtosecond laser pulses

Lan Jiang; Hai-Lung Tsai

ICALEO 2004; M602https://doi.org/10.2351/1.5060340

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Ablation of silicon by picosecond pulses of laser radiation

Gediminas Račiukaitis; Vida Kazlauskienė; Juozas Miškinis

ICALEO 2004; M603https://doi.org/10.2351/1.5060341

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Directly diode pumped high power femtosecond laser for high precision materials processing

Philippe Féru; Mingwei Li; Arnd Krueger

ICALEO 2004; M604https://doi.org/10.2351/1.5060342

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Predication of ablation depth and crater shape in femtosecond laser micromachining of wide bandgap materials

Lan Jiang; Hai-Lung Tsai

ICALEO 2004; M605https://doi.org/10.2351/1.5060343

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Active waveguides written in rare-earth doped materials with femtosecond laser pulses

Martin Ams; Michael J. Withford; Judith M. Dawes; James A. Piper

ICALEO 2004; M606https://doi.org/10.2351/1.5060344

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Femtosecond laser machining of glass using single and few pulses

Stuart Campbell; Duncan P. Hand; Derryck T. Reid

ICALEO 2004; M607https://doi.org/10.2351/1.5060345

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Compact, high average power semiconductor laser system for ultrashort pulse ablation

Michael Mielke; Richard Stoltz; Jeff Bullington; Peter J. Delfyett

ICALEO 2004; M608https://doi.org/10.2351/1.5060346

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Laser micromachining of pyrex and quartz glass using femtosecond-lasers

Tino Petsch; Bernd Keiper; Günter Reiße; Steffen Weißmantel; Robby Ebert; Horst Exner

ICALEO 2004; M609https://doi.org/10.2351/1.5060347

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Micro-machining using high energy picosecond laser pulses a cause-effect consideration

Andreas Ostendorf; Frank Siegel

ICALEO 2004; M610https://doi.org/10.2351/1.5060348

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Surface Processes

Carbon microstructure fabrication by laser-induced chemical vapor deposition

Masato Yoshida; Hirofumi Hidai; Hitoshi Tokura

ICALEO 2004; M701https://doi.org/10.2351/1.5060349

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Lap welding with direct diode laser of thin foil on thick substrate

Yoshinori Funada; Nobuyuki Abe

ICALEO 2004; M702https://doi.org/10.2351/1.5060350

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Local deposition of diamond-like carbon films on tungsten TIPS by krf excimer laser

J. Shi; Y. F. Lu; R. S. Cherukuri; K. K. Mendu

ICALEO 2004; M704https://doi.org/10.2351/1.5060351

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Industrial laser micro sintering

T. Petsch; P. Regenfuß; R. Ebert; L. Hartwig; S. Klötzer; Th. Brabant; H. Exner

ICALEO 2004; M705https://doi.org/10.2351/1.5060352

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Development of industrial 3D real object duplication system by selective multi-laser sintering process

DongSoo Kim; SungJong Kim

ICALEO 2004; M706https://doi.org/10.2351/1.5060353

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Steam laser cleaning of nanoparticles from silicon substrates

N. Batta; Y. F. Lu; D. W. Doerr; D. R. Alexander

ICALEO 2004; P555https://doi.org/10.2351/1.5060394

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Glass and Optical Company Manufacturing

Comparison of beam homogenizers for use in a refractive laser surgical system

Mark Arnoldussen, Ph.D.

ICALEO 2004; M802https://doi.org/10.2351/1.5060354

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

CO₂ laser processing of optical fibers

Marc Levesque; Alain Cournoyer; Luc Lévesque

ICALEO 2004; M803https://doi.org/10.2351/1.5060355

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

High-performance light-shaper modules with acylindrical microlens arrays

Oliver Homburg; Wieland Hill; Dirk Hauschild; Vitalij Lissotschenko

ICALEO 2004; M804https://doi.org/10.2351/1.5060356

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

2-D laser forming comparative study on Nd:YAG of titanium alloy Ti-6Al-4V

Konrad Bartkowiak; S. P. Edwardson; G. Dearden; K. G. Watkins

ICALEO 2004; P528https://doi.org/10.2351/1.5060377

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Local deposition of diamond-like carbon films on tungsten tips by KRF excimer laser

J. Shi; Y. F. Lu; R. S. Cherukuri; K. K. Mendu

ICALEO 2004; P549https://doi.org/10.2351/1.5060391

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

New developments in the process of the laser powder surfacing

Andrzej Klimpel; Aleksander Lisiecki; Damian Janicki

ICALEO 2004; P561https://doi.org/10.2351/1.5060398

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

Particle-free semiconductor dicing using the water jet guided laser technology

Delphine Perrottet; Akos Spiegel; Frank Wagner; Roy Housh; Bernold Richerzhagen; John Manley

ICALEO 2004; P565https://doi.org/10.2351/1.5060401

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text