Skip to Main Content
Umbrella Alt Text
header search
Search
Advanced Search |Citation Search
Skip Nav Destination

Investigation on synchronization of the offset printing process for fine patterning and precision overlay

J. Appl. Phys. 115, 234908 (2014)
This article has been cited by the following articles in journals that are participating in CrossRef Cited-by Linking.
Transfer of Micro‐LEDs with Roll‐Based Direct Overlay Alignment for Manufacturing Transparent Displays
  • Sung‐Uk Yoon
  • Yun Hwangbo
  • Bongkyun Jang
  • Hyeon‐Don Kim
  • Jae‐Hyun Kim
Advanced Electronic Materials (2024) 10 (11)
Arc-to-sheet printer for high-precision patterning with positional errors below 6 ppm at 3σ level: Trochoidal trajectory mechanism for rotary motion of arc
  • Yasuyuki Kusaka
  • Atsushi Hirata
  • Akihiko Ohgata
  • Nobuko Fukuda
Precision Engineering (2023) 83: 192.
Fully roll-to-roll gravure printed electronics: challenges and the way to integrating logic gates
  • Tiara A. M.
  • Hyeokgyun Moon
  • Gyoujin Cho
  • Jinkee Lee
Japanese Journal of Applied Physics 61, SE0802 (2022)
Actively compensated precision overlay in a reverse-offset printing system for realizing printed electronics of a large-area and multi-layer structure
  • Dongwoo Kang
  • Hyunchang Kim
  • Hyuntae Kim
  • Jeongdai Jo
  • Taik-Min Lee
Flexible and Printed Electronics 7, 014010 (2022)
Escape dynamics of liquid droplets confined between soft interfaces: non-inertial coalescence cascades
  • Maciej Chudak
  • Jesse S. Kwaks
  • Jacco H. Snoeijer
  • Anton A. Darhuber
Soft Matter 16, 1866 (2020)
Distortion mechanism of patterning positions in the soft roller printing process for realizing large-area overlay printing
  • Dongwoo Kang
  • Eonseok Lee
  • Hyunchang Kim
  • Seung-Hyun Lee
  • Taik-Min Lee
Journal of Micromechanics and Microengineering 30, 045012 (2020)
Decomposition of pattern distortions by the Spread polynomial model in roll-to-sheet reverse offset printing
  • Yasuyuki Kusaka
  • Nobuko Fukuda
Journal of Micromechanics and Microengineering 30, 095007 (2020)
High-Precision Roller Supported by Active Magnetic Bearings
  • Cheol Hoon Park
  • Tae Gwang Yoon
  • Dongwoo Kang
  • Hugo Rodrigue
Applied Sciences 9, 4389 (2019)
Low-Temperature Sintering Characteristics of Ag-Based Complex Inks Using Transient Melting and Joining of Sn–58Bi Nanoparticles
  • Woo Lim Choi
  • Jong-Hyun Lee
Metals and Materials International 25, 1388 (2019)
Printing Speed and Quality Enhancement by Controlling the Surface Energy of Cliché in Reverse Offset Printing
  • Young Cho
  • Yeonho Jeong
  • Youn Kim
  • Sin Kwon
  • Seung-Hyun Lee
  • Kwang Kim
  • Dongwoo Kang
  • Taik-Min Lee
Applied Sciences 7, 1302 (2017)
Enhancement of printing overlay accuracy by reducing the effects of mark deformations
  • Eonseok Lee
  • Young-Man Choi
  • Seung-Hyun Lee
  • Sin Kwon
  • Taik-Min Lee
  • Dongwoo Kang
Microelectronic Engineering (2017) 180: 8.
High-Precision Printing Force Control System for Roll-to-Roll Manufacturing
  • Young-Man Choi
  • Dongwoo Kang
  • Sungsoo Lim
  • Moon Gu Lee
  • Seung-Hyun Lee
IEEE/ASME Transactions on Mechatronics 22, 2351 (2017)
Rewetting of semi-dried ink patterns by vapour annealing for developing a reflow process in reverse offset printing
  • Yasuyuki Kusaka
  • Kazuyoshi Sugihara
  • Masayoshi Koutake
  • Hirobumi Ushijima
Journal of Micromechanics and Microengineering 27, 017002 (2017)
Roll-to-roll gravure printing of thick-film silver electrode micropatterns for flexible printed circuit board
  • Kee-Hyun Shin
  • Ho Anh Duc Nguyen
  • Janghoon Park
  • Dongjun Shin
  • Dongjin Lee
Journal of Coatings Technology and Research 14, 95 (2017)
Direct observation of microcontact behaviours in pattern-generation step of reverse offset printing
  • Yasuyuki Kusaka
  • Shusuke Kanazawa
  • Noritaka Yamamoto
  • Hirobumi Ushijima
Journal of Micromechanics and Microengineering 27, 015003 (2017)
Selective Light-Induced Patterning of Carbon Nanotube/Silver Nanoparticle Composite To Produce Extremely Flexible Conductive Electrodes
  • Inhyuk Kim
  • Kyoohee Woo
  • Zhaoyang Zhong
  • Eonseok Lee
  • Dongwoo Kang
  • Sunho Jeong
  • Young-Man Choi
  • Yunseok Jang
  • Sin Kwon
  • Jooho Moon
ACS Applied Materials & Interfaces 9, 6163 (2017)
Pattern size tolerance of reverse offset printing: a proximity deformation effect related to local PDMS slipping
  • Yasuyuki Kusaka
  • Shusuke Kanazawa
  • Masayoshi Koutake
  • Hirobumi Ushijima
Journal of Micromechanics and Microengineering 27, 105018 (2017)
Flexible ultraviolet photodetectors with ZnO nanowire networks fabricated by large area controlled roll-to-roll processing
  • Janghoon Park
  • Jongsu Lee
  • Youngwook Noh
  • Kee-Hyun Shin
  • Dongjin Lee
Journal of Materials Chemistry C 4, 7948 (2016)
A study on the enhancement of the reliability in gravure offset roll printing with blanket swelling control
  • Ga Eul Kim
  • Kyoohee Woo
  • Dongwoo Kang
  • Yunseok Jang
  • Young-Man Choi
  • Moon G Lee
  • Taik-Min Lee
  • Sin Kwon
Journal of Micromechanics and Microengineering 26, 105014 (2016)
Push-pull process for contact defect-free patterning in reverse offset printing
  • Yasuyuki Kusaka
  • Kazuyoshi Sugihara
  • Hirobumi Ushijima
Flexible and Printed Electronics 1, 045004 (2016)
Development of a precision reverse offset printing system
  • Hyunchang Kim
  • Eonseok Lee
  • Young-Man Choi
  • Sin Kwon
  • Seunghyun Lee
  • Jeongdai Jo
  • Taik-Min Lee
  • Dongwoo Kang
Review of Scientific Instruments (2016) 87 (1)
Patterning Processes for Flexible Electronics
  • Bruce E. Kahn
Proceedings of the IEEE 103, 497 (2015)
Fabrication of embedded electrodes by reverse offset printing
  • Yasuyuki Kusaka
  • Masayoshi Koutake
  • Hirobumi Ushijima
Journal of Micromechanics and Microengineering 25, 045017 (2015)
  • Online ISSN 1089-7550
  • Print ISSN 0021-8979

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

  • © Copyright AIP Publishing LLC
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal