Volumes | ICALEO | AIP Publishing

Skip to Main Content

Skip Nav Destination

ICALEO 2002: 21st International Congress on Laser Materials Processing and Laser Microfabrication

LASER MATERIALS PROCESSING CONFERENCE

Section B - Surface Modification

Use of fiber lasers for micro cutting applications in the medical device industry

K. F. Kleine; B. Whitney; K. G. Watkins

ICALEO 2002; 70https://doi.org/10.2351/1.5065757

View Articletitled, Use of fiber lasers for micro cutting applications in the medical device industry

The absorption of a diode laser beam in laser surface hardening of a low alloy steel

Henrikki Pantsar; Veli Kujanpää

ICALEO 2002; 185https://doi.org/10.2351/1.5065721

View Articletitled, The absorption of a diode laser beam in laser surface hardening of a low alloy steel

Practical aspects of laser cladding with high power lasers

Trevor Anderson

ICALEO 2002; 24212https://doi.org/10.2351/1.5065730

View Articletitled, Practical aspects of laser cladding with high power lasers

Development of an ultra short wavelength solid state laser

M. M. S. Gualini

ICALEO 2002; 48674https://doi.org/10.2351/1.5065742

View Articletitled, Development of an ultra short wavelength solid state laser

Writing buried optical waveguides: Contrasts in ultrafast and ultraviolet lasers

Peter R. Herman; Midori X. Wei; Dragan Coric; Jianzhou Li; Amir Nejad-Malayeri; Paul B. Corkum; Ravi Bhardwaj; David M. Rayner

ICALEO 2002; 54499https://doi.org/10.2351/1.5065748

View Articletitled, Writing buried optical waveguides: Contrasts in ultrafast and ultraviolet lasers

Comparison of CO₂ and high power diode laser (HPDL) cladding

J. Tuominen; J. Laurila; J. Vihinen; P. Vuoristo; T. Mäntylä; L. Olaussen; T. Peltola

ICALEO 2002; 140316https://doi.org/10.2351/1.5066123

View Articletitled, Comparison of CO<sub>2</sub> and high power diode laser (HPDL) cladding

Reliable refractive-index adjustment in Ge-doped silica-core planar waveguides by high-repetition rate femtosecond laser pulses

Kunihiko Washio; Hikaru Kouta; Yutaka Urino; Kazuyuki Hirao

ICALEO 2002; 145627https://doi.org/10.2351/1.5066125

View Articletitled, Reliable refractive-index adjustment in Ge-doped silica-core planar waveguides by high-repetition rate femtosecond laser pulses

Nd:YAG laser cladding of Al/Si and Al7075 powder on Al7050 and Al7075 substrates

M. Brandt; Y. Durandet; Qianchu Liu

ICALEO 2002; 147199https://doi.org/10.2351/1.5065593

View Articletitled, Nd:YAG laser cladding of Al/Si and Al7075 powder on Al7050 and Al7075 substrates

Laser synthesizing particulate reinforced NiAl intermetallic matrix composite

Xiangyang Xu; Minlin Zhong; Wenjin Liu; Hongqing Sun

ICALEO 2002; 153729https://doi.org/10.2351/1.5065600

View Articletitled, Laser synthesizing particulate reinforced NiAl intermetallic matrix composite

Computational process parameter optimization for laser beam transformation hardening

Gunther Goebel; Steffen Bonss; Berndt Brenner; Eckhard Beyer

ICALEO 2002; 156139https://doi.org/10.2351/1.5065604

View Articletitled, Computational process parameter optimization for laser beam transformation hardening

Coaxial laser cladding nozzle for use with a high power diode laser

Paul Hayhurst; Jari Tuominen; Petri Vuoristo; Tapio Mäntylä

ICALEO 2002; 156745https://doi.org/10.2351/1.5065608

View Articletitled, Coaxial laser cladding nozzle for use with a high power diode laser

The effect of beam shape in laser surface treatment of ceramics

D. Triantafyllidis; L. Li; F. H. Stott

ICALEO 2002; 156846https://doi.org/10.2351/1.5065609

View Articletitled, The effect of beam shape in laser surface treatment of ceramics

UV (ultraviolet) ps (picosecond)-laser with high peak power for micromachining

Saulius Jacinavičius; Gediminas Račiukaitis

ICALEO 2002; 156947https://doi.org/10.2351/1.5065610

View Articletitled, UV (ultraviolet) ps (picosecond)-laser with high peak power for micromachining

Laser-induced thermochemical wet etching of titanium foil for fabrication of microstructures

Sungho Jeong; Yongsan Shin; Seungwoo Son

ICALEO 2002; 157150https://doi.org/10.2351/1.5065611

View Articletitled, Laser-induced thermochemical wet etching of titanium foil for fabrication of microstructures

Design and performance of multilevel phase fan-out diffractive optical elements for laser materials processing

Keiji Fuse; Takayuki Hirai; Toshihiko Ushiro; Takeshi Okada; Kenichi Kurisu; Keiji Ebata

ICALEO 2002; 157251https://doi.org/10.2351/1.5065612

View Articletitled, Design and performance of multilevel phase fan-out diffractive optical elements for laser materials processing

Writing refractive index gratings in perspex and polymer optical fibres using femto-second laser irradiation

D. Jones; P. J. Scully; D. A. Jaroszynski

ICALEO 2002; 157614https://doi.org/10.2351/1.5066131

View Articletitled, Writing refractive index gratings in perspex and polymer optical fibres using femto-second laser irradiation

Laser ablative micro-machining and its applications for rapid fabrication of micro-fluidic components

Tuan-Anh Mai; Stephen Wan; G. C. Lim

ICALEO 2002; 157915https://doi.org/10.2351/1.5066133

View Articletitled, Laser ablative micro-machining and its applications for rapid fabrication of micro-fluidic components

Laser induced chemical etching of THz waveguides and quasi optical devices in silicon

Christian Y. Drouët d’Aubigny; Christopher K. Walker

ICALEO 2002; 158669https://doi.org/10.2351/1.5065622

View Articletitled, Laser induced chemical etching of THz waveguides and quasi optical devices in silicon

High average power femtosecond laser source for micromachining

E. Baubeau; F. Saviot; E. Marquis; M. Schwarz; A. Brignon; N. Huot; E. Audouard; P. Laporte

ICALEO 2002; 159177https://doi.org/10.2351/1.5065625

View Articletitled, High average power femtosecond laser source for micromachining

Surface melting of aluminium alloys using an ultra-super-pulsed CO₂ laser

M. Tsagkarakis; F. Villarreal; D. R. Hall; H. J. Baker; S. Williams

ICALEO 2002; 159280https://doi.org/10.2351/1.5065626

View Articletitled, Surface melting of aluminium alloys using an ultra-super-pulsed CO<sub>2</sub> laser

Laser processing of photonics components using multiple UV wavelength source

E. K. Illy; H. J. Booth; M. R. H. Knowles

ICALEO 2002; 160518https://doi.org/10.2351/1.5066136

View Articletitled, Laser processing of photonics components using multiple UV wavelength source

Recurrent neural network based analysis for laser cladding dynamic model identification

E. Toyserkani; A. Khajepour; S. Corbin

ICALEO 2002; 160610https://doi.org/10.2351/1.5066137

View Articletitled, Recurrent neural network based analysis for laser cladding dynamic model identification

Determination of clad characteristics in real-time

E. Toyserkani; A. Khajepour; S. Corbin

ICALEO 2002; 160615https://doi.org/10.2351/1.5066138

View Articletitled, Determination of clad characteristics in real-time

A 3-D transient finite element model for laser cladding by powder injection

E. Toyserkani; A. Khajepour; S. Corbin

ICALEO 2002; 160616https://doi.org/10.2351/1.5066139

View Articletitled, A 3-D transient finite element model for laser cladding by powder injection

Time resolved optomechanical investigations on the interaction of laser radiation with glass in the femtosecond regime

A. Horn; H. Khajehnouri; E. W. Kreutz; R. Poprawe

ICALEO 2002; 160910https://doi.org/10.2351/1.5066141

View Articletitled, Time resolved optomechanical investigations on the interaction of laser radiation with glass in the femtosecond regime

Fabrication of high-aspect-ratio microstructures using excimer lasers

Ying-Tung Chen; Kung-Jeng Ma; Ampere A. Tseng

ICALEO 2002; 161118https://doi.org/10.2351/1.5066142

View Articletitled, Fabrication of high-aspect-ratio microstructures using excimer lasers

High power laser diode system for surface treatment

Mark S. Zediker; John M. Haake

ICALEO 2002; 162314https://doi.org/10.2351/1.5066148

View Articletitled, High power laser diode system for surface treatment

Laser structuring and modification of surfaces for medical and micro chemical components

A. Gillner; E. Bremus-Köbberling; P. Jacobs; Li-Ya Yeh

ICALEO 2002; 162713https://doi.org/10.2351/1.5066149

View Articletitled, Laser structuring and modification of surfaces for medical and micro chemical components

Comparison excimer laser – Solid state laser

Rainer Paetzel

ICALEO 2002; 163015https://doi.org/10.2351/1.5066151

View Articletitled, Comparison excimer laser – Solid state laser

Effect of laser hardening on fracture toughness of steel

Jari Rämö; Jyrki Latokartano; Tuomo Tiainen

ICALEO 2002; 163915https://doi.org/10.2351/1.5066158

View Articletitled, Effect of laser hardening on fracture toughness of steel

Theoretical study on SHG conversion efficiency for Gaussian beam and control of its decline

Kazufumi Nomura; Etsuji Ohmura; Isamu Miyamoto

ICALEO 2002; 164716https://doi.org/10.2351/1.5066165

View Articletitled, Theoretical study on SHG conversion efficiency for Gaussian beam and control of its decline

Microstructure and toughness of laser welded joint of 400MPa ultra-fine grained steel

Xudong Zhang; Wuzhu Chen; Cheng Wang; Yun Peng; Zhiling Tian

ICALEO 2002; 164924https://doi.org/10.2351/1.5066166

View Articletitled, Microstructure and toughness of laser welded joint of 400MPa ultra-fine grained steel

Laser casting and laser clad-casting: New processes for rapid prototyping and production

J. Powell; H. Gedda; A. Kaplan

ICALEO 2002; 165410https://doi.org/10.2351/1.5066171

View Articletitled, Laser casting and laser clad-casting: New processes for rapid prototyping and production

A process efficiency comparison of Nd:YAG and CO₂ laser cladding

H. Gedda; J. Powell; A. Kaplan

ICALEO 2002; 165411https://doi.org/10.2351/1.5066172

View Articletitled, A process efficiency comparison of Nd:YAG and CO<sub>2</sub> laser cladding

A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders

Andrew J. Pinkerton; Lin Li

ICALEO 2002; 165517https://doi.org/10.2351/1.5066173

View Articletitled, A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders

Laser based hybrid techniques for surface coating

St. Nowotny; S. Scharek; T. Naumann; R. Zieris; E. Beyer

ICALEO 2002; 166018https://doi.org/10.2351/1.5066178

View Articletitled, Laser based hybrid techniques for surface coating

Fundamental investigations on process monitoring in the laser cladding process

D. Salehi; M. Brandt; M. Kogel-Hollacher; J. Schmid

ICALEO 2002; 168222https://doi.org/10.2351/1.5066192

View Articletitled, Fundamental investigations on process monitoring in the laser cladding process

Diamond micro-optics for high-power lasers

Mikael Karlsson; Fredrik Nikolajeff

ICALEO 2002; 168725https://doi.org/10.2351/1.5066197

View Articletitled, Diamond micro-optics for high-power lasers

Geometrical modeling of laser ablation

S. R. Vatsya; E. V. Bordatchev; S. K. Nikumb

ICALEO 2002; 169123https://doi.org/10.2351/1.5066199

View Articletitled, Geometrical modeling of laser ablation

Study on laser surface modification and repair welding techniques for neutron irradiated austenitic stainless steels

Masanori Kanno; Tsuneyuki Hashimoto; Wataru Kouno; Masato Koshiishi

ICALEO 2002; 170511https://doi.org/10.2351/1.5066205

View Articletitled, Study on laser surface modification and repair welding techniques for neutron irradiated austenitic stainless steels

Effect of water film, graphite coating and multiple passes on the tile grout removal using high power diode laser

K. Minami; J. Lawrence; L. Li; R. E. Edwards; A. W. Gale

ICALEO 2002; 170826https://doi.org/10.2351/1.5066207

View Articletitled, Effect of water film, graphite coating and multiple passes on the tile grout removal using high power diode laser

Micromachining of microfluidic devices using a high-brightness diode-pumped Nd:YAG laser

D. Lim; B. Cho; S. Takayama; J. Mazumder

ICALEO 2002; 171328https://doi.org/10.2351/1.5066208

View Articletitled, Micromachining of microfluidic devices using a high-brightness diode-pumped Nd:YAG laser

Materials modeling for advanced coating systems

R. P. Martukanitz; S. S. Babu

ICALEO 2002; 183524https://doi.org/10.2351/1.5066216

View Articletitled, Materials modeling for advanced coating systems

Surface modification of 347 stainless steel by rapid mirror scanning of a high power CO₂ laser

Jorge A. Ramos; David L. Bourell; Madhav Rao Govindaraju

ICALEO 2002; 186471https://doi.org/10.2351/1.5065722

View Articletitled, Surface modification of 347 stainless steel by rapid mirror scanning of a high power CO<sub>2</sub> laser

Dimensional and material characteristics of direct deposited tool steel by CO₂ laser

J. Choi; Y. Hua

ICALEO 2002; 237126https://doi.org/10.2351/1.5065728

View Articletitled, Dimensional and material characteristics of direct deposited tool steel by CO<sub>2</sub> laser

Fiber laser technology with temporal pulse shaping from femtosecond to nanosecond for “tailoring” flexible laser material processing

Jim Bovatsek; Heinrich Endert; Rajesh Patel; Michelle L. Stock

ICALEO 2002; 363112https://doi.org/10.2351/1.5065736

View Articletitled, Fiber laser technology with temporal pulse shaping from femtosecond to nanosecond for “tailoring” flexible laser material processing

Laser applications by using third harmonic Nd:YAG lasers

Wentao Hu; Kunal Shah; Qiang Fu

ICALEO 2002; 593302https://doi.org/10.2351/1.5065752

View Articletitled, Laser applications by using third harmonic Nd:YAG lasers

Laser safety in the high school classroom

Pearl John; Richard Shanks; Renee Holtzhauser; Meadow Woodbury; Kenneth Cannole

ICALEO 2002; 633243https://doi.org/10.2351/1.5065753

View Articletitled, Laser safety in the high school classroom

Effect of zirconia on laser cladding of hydroxyapatite bioceramic on Ti-alloy

Jae-Do Kim; Jiachen Liu

ICALEO 2002; 695133https://doi.org/10.2351/1.5065756

View Articletitled, Effect of zirconia on laser cladding of hydroxyapatite bioceramic on Ti-alloy

Laser roll bonding of mild steel to aluminum and control of intermetallic compound layer

Kutsuna Muneharu; Rathod Manoj; Ammar Azar

ICALEO 2002; 737166https://doi.org/10.2351/1.5065761

View Articletitled, Laser roll bonding of mild steel to aluminum and control of intermetallic compound layer

Laser-based micro-manufacturing of complex micro structures

Hongseok Choi; Yong Yang; Xiaochun Li

ICALEO 2002; 801195https://doi.org/10.2351/1.5065763

View Articletitled, Laser-based micro-manufacturing of complex micro structures

Spot size measurements for ultra-small laser welds

Danny O. MacCallum; Gerald A. Knorovsky

ICALEO 2002; 828167https://doi.org/10.2351/1.5065765

View Articletitled, Spot size measurements for ultra-small laser welds

Laser surface nitriding and texturing of NiTi shape memory alloy for bonding with bioactive glass

H. C. Man; Z. D. Cui; T. M. Yue

ICALEO 2002; 840197https://doi.org/10.2351/1.5065766

View Articletitled, Laser surface nitriding and texturing of NiTi shape memory alloy for bonding with bioactive glass

Laser surface aluminizing of mild steel: Microstructural and corrosion characteristics

C. T. Kwok; H. C. Man; F. T. Cheng

ICALEO 2002; 840270https://doi.org/10.2351/1.5065767

View Articletitled, Laser surface aluminizing of mild steel: Microstructural and corrosion characteristics

Cavitation erosion and corrosion behaviors of stainless steel 316 laser surface-alloyed with WC

K. H. Lo; F. T. Cheng; H. C. Man; C. T. Kwok

ICALEO 2002; 840271https://doi.org/10.2351/1.5065768

View Articletitled, Cavitation erosion and corrosion behaviors of stainless steel 316 laser surface-alloyed with WC

Industrial applications of laser cladding

Thierry Marchione

ICALEO 2002; 850223https://doi.org/10.2351/1.5065770

View Articletitled, Industrial applications of laser cladding

Microscopic analysis of the segregation in direct laser fabrication (DLF) of alloys

J. Mei; A. Davidson; X. Wu

ICALEO 2002; 902172https://doi.org/10.2351/1.5065774

View Articletitled, Microscopic analysis of the segregation in direct laser fabrication (DLF) of alloys

Section C - Sensing Monitoring and Modeling

The application of optical signal detection for characterizing transitions during laser beam welding

D. Pfluger; D. Harris; J. C. Ion

ICALEO 2002; 115https://doi.org/10.2351/1.5065584

View Articletitled, The application of optical signal detection for characterizing transitions during laser beam welding

In process laser beam diagnostics

M. Sparkes; W. O'Neill; J. Gabzdyl

ICALEO 2002; 224https://doi.org/10.2351/1.5065727

View Articletitled, In process laser beam diagnostics

Determination of weld quality in pulsed Nd:YAG laser welds using IR and acoustic sensors

Gregory Bates; Girish Kelkar

ICALEO 2002; 8460https://doi.org/10.2351/1.5065769

View Articletitled, Determination of weld quality in pulsed Nd:YAG laser welds using IR and acoustic sensors

Plume attenuation under high power Nd:YAG laser welding

J. Greses; P. A. Hilton; C. Y. Barlow; W. M. Steen

ICALEO 2002; 47727https://doi.org/10.2351/1.5065740

View Articletitled, Plume attenuation under high power Nd:YAG laser welding

Beam diagnostics enable high effiency laser beam welding of sandwich panels serial production for shipyard industries

R. Kramer; K. Hänsel; H. Schwede; V. Brandl; M. Klos

ICALEO 2002; 51722https://doi.org/10.2351/1.5065745

View Articletitled, Beam diagnostics enable high effiency laser beam welding of sandwich panels serial production for shipyard industries

Logarithmic CMOS camera microscope for beam diagnostics – Profiling of high power Q-switch lasers

R. Kramer; K. Hänsel; H. Schwede; V. Brandl; M. Klos

ICALEO 2002; 51778https://doi.org/10.2351/1.5065746

View Articletitled, Logarithmic CMOS camera microscope for beam diagnostics – Profiling of high power Q-switch lasers

Crack-free welding of low weldability carbon steel by high power diode laser

A. Sánchez-Castillo; J. Pou; M. Rodríguez-Lage; F. Lusquiños; F. Quintero; R. Soto; M. Boutinguiza; M. Pérez-Amor

ICALEO 2002; 109525https://doi.org/10.2351/1.5066119

View Articletitled, Crack-free welding of low weldability carbon steel by high power diode laser

Pore formation and prevention in deep penetration pulsed laser welding

W. H. Zhang; H. L. Tsai

ICALEO 2002; 139710https://doi.org/10.2351/1.5066121

View Articletitled, Pore formation and prevention in deep penetration pulsed laser welding

The physics of laser material processing from art to technology

Martien H. H. van Dijk; Paul Bant

ICALEO 2002; 141448https://doi.org/10.2351/1.5065590

View Articletitled, The physics of laser material processing from art to technology

An approach to consider the results of previous forming processes in the simulation of laser beam welding

M. F. Zäh; F. Auer

ICALEO 2002; 157352https://doi.org/10.2351/1.5065613

View Articletitled, An approach to consider the results of previous forming processes in the simulation of laser beam welding

Influences on hole quality in high precision drilling of steel with ultra-short pulsed laser systems

Christian Föhl; Detlef Breitling; Friedrich Dausinger

ICALEO 2002; 157512https://doi.org/10.2351/1.5066130

View Articletitled, Influences on hole quality in high precision drilling of steel with ultra-short pulsed laser systems

New aspects of monitoring with a CMOS camera for laser materials processing

J. Beersiek

ICALEO 2002; 157756https://doi.org/10.2351/1.5065617

View Articletitled, New aspects of monitoring with a CMOS camera for laser materials processing

Evaluation of coaxial process control systems for Nd:YAG laser welding in aeronautics application

F. Bardin; P. Aubry; W. Knapp; O. Collin; W. S. O. Rodden; A. Cobo; J. M. Lopez-Higuera; J. D. C. Jones; D. P. Hand

ICALEO 2002; 159382https://doi.org/10.2351/1.5065628

View Articletitled, Evaluation of coaxial process control systems for Nd:YAG laser welding in aeronautics application

Process control in pulsed laser welding of electronics

Michael Schmidt

ICALEO 2002; 159585https://doi.org/10.2351/1.5065629

View Articletitled, Process control in pulsed laser welding of electronics

Monitoring of laser welding process using PCA based 2-step sensor fusion

Xichu Chen; Elijah Kannatey-Asibu, Jr.

ICALEO 2002; 160089https://doi.org/10.2351/1.5065631

View Articletitled, Monitoring of laser welding process using PCA based 2-step sensor fusion

Generation of flat-top focussed beams for percussion drilling of ceramic and metal

D. W. Coutts; M. J. Withford; J. A. Piper; G. Rutterford; A. I. Bell; M. R. H. Knowles

ICALEO 2002; 160514https://doi.org/10.2351/1.5066135

View Articletitled, Generation of flat-top focussed beams for percussion drilling of ceramic and metal

Study of assist gas flow behavior during laser welding

M. Hamadou; R. Fabbro; G. Caillibotte; K. Chouf; F. Briand

ICALEO 2002; 160826https://doi.org/10.2351/1.5066140

View Articletitled, Study of assist gas flow behavior during laser welding

A system for dynamic shape measurements during laser processing

Mark Reeves; Maria D Stoikou; Andrew J Moore; Duncan P Hand; J. R. Cho; S. P. Edwardson; K. G. Watkins; G. Dearden; P. French; Julian D C Jones

ICALEO 2002; 161311https://doi.org/10.2351/1.5066144

View Articletitled, A system for dynamic shape measurements during laser processing

New method for beam profiling high power CO2 lasers with an IR camera-based system

Lawrence I. Green

ICALEO 2002; 163117https://doi.org/10.2351/1.5066152

View Articletitled, New method for beam profiling high power CO2 lasers with an IR camera-based system

Beam characterization for Nd:YAG spot welding lasers

P. W. Fuerschbach; J. T. Norris

ICALEO 2002; 163218https://doi.org/10.2351/1.5066153

View Articletitled, Beam characterization for Nd:YAG spot welding lasers

Lubricated adjustable optical wedge beam steerers

George Dubé; Roland Juhala; Samuel W. Bross

ICALEO 2002; 163319https://doi.org/10.2351/1.5066154

View Articletitled, Lubricated adjustable optical wedge beam steerers

High aspect-ratio laser-drilling of micro-holes with a Nd:YAG master-oscillator power-amplifier (MOPA) system

Alexander Binder; Thomas Metzger; David Ashkenasi; Gerhard Müller; Thomas Riesbeck; Hans-J. Eichler

ICALEO 2002; 163511https://doi.org/10.2351/1.5066156

View Articletitled, High aspect-ratio laser-drilling of micro-holes with a Nd:YAG master-oscillator power-amplifier (MOPA) system

Overcoming the difficulty of gap formation between the conductor junction areas during laser spot micro-welding

A. Ostendorf; K. Körber; J. Zeadan

ICALEO 2002; 164015https://doi.org/10.2351/1.5066159

View Articletitled, Overcoming the difficulty of gap formation between the conductor junction areas during laser spot micro-welding

Validating predictions of keyholing phenomenon in laser weld models

Aaron Hall; Allen Roach; Gerald Knorovsky

ICALEO 2002; 164515https://doi.org/10.2351/1.5066163

View Articletitled, Validating predictions of keyholing phenomenon in laser weld models

Laser-material interaction and process sensing in underwater Nd:YAG laser welding

Xudong Zhang; Wuzhu; Eiji Ashida; Fukuhisa Matsuda

ICALEO 2002; 164925https://doi.org/10.2351/1.5066167

View Articletitled, Laser-material interaction and process sensing in underwater Nd:YAG laser welding

Energy coupling and process efficiency in double-focus welding with Nd:YAG

Wolfgang Gref; Bernd Hohenberger; Friedrich Dausinger; Helmut Hügel

ICALEO 2002; 165116https://doi.org/10.2351/1.5066168

View Articletitled, Energy coupling and process efficiency in double-focus welding with Nd:YAG

Real-time classification of laser welding process irregularities by using multivariate statistics

Hans Kurt Tönshoff; Andreas Ostendorf; Oliver Hillers

ICALEO 2002; 165317https://doi.org/10.2351/1.5066170

View Articletitled, Real-time classification of laser welding process irregularities by using multivariate statistics

Increased performance and flexibility of process monitoring for deep penetration laser welding

H. K. Tönshoff; K. Körber; T. Hesse; M. Stallmach

ICALEO 2002; 165617https://doi.org/10.2351/1.5066175

View Articletitled, Increased performance and flexibility of process monitoring for deep penetration laser welding

Feedback control for optimal production speed in laser beam welding of mild steel

Sjoerd Postma; Ronald G. K. M. Aarts; Johan Meijer; Ben Jonker

ICALEO 2002; 166319https://doi.org/10.2351/1.5066180

View Articletitled, Feedback control for optimal production speed in laser beam welding of mild steel

The arc image processing of hybrid welding

Yanbin Chen; Jie Chen; Lin Wu; Liqun Li

ICALEO 2002; 167127https://doi.org/10.2351/1.5066185

View Articletitled, The arc image processing of hybrid welding

In process laser beam diagnostics (403)

M. Sparkes; W. O'Neill; J. Gabzdyl

ICALEO 2002; 167922https://doi.org/10.2351/1.5066191

View Articletitled, In process laser beam diagnostics (403)

Optimized laser applications with lamp-pumped pulsed Nd:YAG lasers

Ronald Holtz; Matthias Jokiel

ICALEO 2002; 170024https://doi.org/10.2351/1.5066204

View Articletitled, Optimized laser applications with lamp-pumped pulsed Nd:YAG lasers

Laser weld chaos control for defect reduction

M. H. Cho; D. F. Farson; J. I. Kim

ICALEO 2002; 384184https://doi.org/10.2351/1.5065738

View Articletitled, Laser weld chaos control for defect reduction

Laser joining of non-metallics for optoelectronic and biomedical applications

Hans J. Herfurth; Reiner Witte; Ingo Bauer

ICALEO 2002; 533161https://doi.org/10.2351/1.5065747

View Articletitled, Laser joining of non-metallics for optoelectronic and biomedical applications

Fusion zone behavior in micron-size laser welding

G. A. Knorovsky; V. V. Semak; D. O. MacCallum

ICALEO 2002; 711194https://doi.org/10.2351/1.5065758

View Articletitled, Fusion zone behavior in micron-size laser welding

New innovations in diode laser cladding

A. Groth; C. Walz; S. Naegeler

ICALEO 2002; 980261https://doi.org/10.2351/1.5065775

View Articletitled, New innovations in diode laser cladding

Section A - Welding

Failure recognition and online process control in laser beam welding

J. Petereit; P. Abels; S. Kaierle; C. Kratzsch; E. W. Kreutz

ICALEO 2002; 240https://doi.org/10.2351/1.5065729

View Articletitled, Failure recognition and online process control in laser beam welding

Ultrashort pulse laser material removal

Engracia Dang; Cho Lik Chan

ICALEO 2002; 21695https://doi.org/10.2351/1.5065726

View Articletitled, Ultrashort pulse laser material removal

Laser welding of tailored blanks

Tomas Forsman

ICALEO 2002; 40525https://doi.org/10.2351/1.5065739

View Articletitled, Laser welding of tailored blanks

Exploiting optical fringes methods to realize a laser adaptive control

M. M. S. Gualini; S. A. Mehmood; I. Awan

ICALEO 2002; 48675https://doi.org/10.2351/1.5065743

View Articletitled, Exploiting optical fringes methods to realize a laser adaptive control

Laser direct write microprocessing of diamond: Generation of highly conductive tracks in diamond like carbon (DLC) and polycrystalline freestanding diamond films

I. A. Salama; N. R. Quick; A. Kar

ICALEO 2002; 119793https://doi.org/10.2351/1.5065585

View Articletitled, Laser direct write microprocessing of diamond: Generation of highly conductive tracks in diamond like carbon (DLC) and polycrystalline freestanding diamond films

Laser consolidation of Ti-6Al-4V alloy for the manufacturing of net-shape functional components

Lijue Xue; Jianyin Chen; Andre Theriault

ICALEO 2002; 151867https://doi.org/10.2351/1.5065595

View Articletitled, Laser consolidation of Ti-6Al-4V alloy for the manufacturing of net-shape functional components

Study of CO₂ laser welding to suppress the defects in thick steel plates welding bead

A. Sugihashi; M. Kido; Y. Kawai; Y. Yano

ICALEO 2002; 156240https://doi.org/10.2351/1.5065605

View Articletitled, Study of CO<sub>2</sub> laser welding to suppress the defects in thick steel plates welding bead

Influence of the process parameters on the welding results of laser-GMA welding

E. Schubert; B. Wedel; G. Köhler

ICALEO 2002; 156442https://doi.org/10.2351/1.5065606

View Articletitled, Influence of the process parameters on the welding results of laser-GMA welding

Blast and impact resistance studies of laser welded and riveted panel structures

G. Dearden; M. C. Simmons; P. Okon; G. K. Schleyer; K. G. Watkins

ICALEO 2002; 157457https://doi.org/10.2351/1.5065614

View Articletitled, Blast and impact resistance studies of laser welded and riveted panel structures

Laser vacuum welding of aluminium, kovar and Ni-Fe alloys for hermetic incapsulation of electronic components

Tuan-Anh Mai; Giok Hong Tay; Ee Wee Koh; G. C. Lim

ICALEO 2002; 157914https://doi.org/10.2351/1.5066132

View Articletitled, Laser vacuum welding of aluminium, kovar and Ni-Fe alloys for hermetic incapsulation of electronic components

Laser welding of aluminium alloy 5083

P. Okon; G. Dearden; K. Watkins; M. Sharp; P. French

ICALEO 2002; 158364https://doi.org/10.2351/1.5065620

View Articletitled, Laser welding of aluminium alloy 5083

Femtosecond pulsed laser processing of thin films for MEMS devices

Michael Stock; Pal Molian; Christian Zorman

ICALEO 2002; 158568https://doi.org/10.2351/1.5065621

View Articletitled, Femtosecond pulsed laser processing of thin films for MEMS devices

High speed videography of microvia formation and melt ejection

Francisco Villarreal; Kiran Gulia; Howard J. Baker; Duncan P. Hand; Denis R. Hall

ICALEO 2002; 159281https://doi.org/10.2351/1.5065627

View Articletitled, High speed videography of microvia formation and melt ejection

Increased seam quality for laser-GMA hybrid welding of zinc-coated steel

H. Haferkamp; A. Ostendorf; J. Bunte; J. Szinyur; M. Höfemann; P. Cordini

ICALEO 2002; 163410https://doi.org/10.2351/1.5066155

View Articletitled, Increased seam quality for laser-GMA hybrid welding of zinc-coated steel

Specially developed glass fabrics for ultimate small diameter hole of high density board by laser drilling method

Yasuyuki Kimura; Yoshinori Gondoh

ICALEO 2002; 164115https://doi.org/10.2351/1.5066160

View Articletitled, Specially developed glass fabrics for ultimate small diameter hole of high density board by laser drilling method

A comparison study of micromachining using mode-locked and Q-switched diode pumped solid state ultraviolet laser

Mingwei Li; Andrew Held; Mark Keirstead

ICALEO 2002; 164415https://doi.org/10.2351/1.5066162

View Articletitled, A comparison study of micromachining using mode-locked and Q-switched diode pumped solid state ultraviolet laser

Laser induced shock cleaning of silicon wafers

J. M. Lee; S. H. Cho; J. G. Park; S. H. Lee; Y. J. Kang; Y. P. Han; S. Y. Kim

ICALEO 2002; 164616https://doi.org/10.2351/1.5066164

View Articletitled, Laser induced shock cleaning of silicon wafers

A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle

Andrew J. Pinkerton; Lin Li

ICALEO 2002; 165528https://doi.org/10.2351/1.5066174

View Articletitled, A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle

Laser welding application for side panel in car body manufacturing

Chang Ho Jung; Heui Bom Lee; I. S. Chang; Tae Yong Kwon

ICALEO 2002; 165717https://doi.org/10.2351/1.5066176

View Articletitled, Laser welding application for side panel in car body manufacturing

Processing of laser joined aluminum-steel tailored blanks in overlap and butt joint configuration

Michael Kreimeyer; Gerd Sepold

ICALEO 2002; 165818https://doi.org/10.2351/1.5066177

View Articletitled, Processing of laser joined aluminum-steel tailored blanks in overlap and butt joint configuration

Preparation of polyperinaphthalenic organic semiconductive nano particles by excimer

Satoru Nishio; Kazuyuki Tamura; Jun Murata; Junko Kitahara; Teruhiko Kan; Akiyoshi Matsuzaki; Nobuo Ando; Yukinori Hato; Hiroshi Fukumura

ICALEO 2002; 166519https://doi.org/10.2351/1.5066181

View Articletitled, Preparation of polyperinaphthalenic organic semiconductive nano particles by excimer

Analysis of deformation behavior of pipe under laser welding

Hideaki Shirai; Setsuo Sawamoto; Takafumi Sato; Masao Toyoda; Masahito Mochizuki

ICALEO 2002; 166825https://doi.org/10.2351/1.5066183

View Articletitled, Analysis of deformation behavior of pipe under laser welding

Shock pressure measurements for the removal of particles of sub-micron dimensions from silicon wafers

C. Curran; K. G. Watkins; J. M. Lee

ICALEO 2002; 167020https://doi.org/10.2351/1.5066184

View Articletitled, Shock pressure measurements for the removal of particles of sub-micron dimensions from silicon wafers

Measurement of focused beam waist of UV pulse laser and material processing threshold

Lian Zou; Weisheng Lei

ICALEO 2002; 167221https://doi.org/10.2351/1.5066186

View Articletitled, Measurement of focused beam waist of UV pulse laser and material processing threshold

Processing of silicon by Nd:YAG-lasers with harmonics generation

Klotzbach Udo; Panzner Michael; Kasper Jörg; Wust Hendrik; Kuntze Thomas; Volker Franke; Beyer Eckhard

ICALEO 2002; 167421https://doi.org/10.2351/1.5066188

View Articletitled, Processing of silicon by Nd:YAG-lasers with harmonics generation

Laser marking of materials by means of micro mirror array

Thomas Kuntze; Michael Panzner; Udo Klotzbach; Eckhard Beyer

ICALEO 2002; 167521https://doi.org/10.2351/1.5066189

View Articletitled, Laser marking of materials by means of micro mirror array

Welding of thick austenitic stainless steel using Nd:YAG -laser with filler wire and hybrid process

Tommi Jokinen; Miikka Karhu; Veli Kujanpää

ICALEO 2002; 168322https://doi.org/10.2351/1.5066193

View Articletitled, Welding of thick austenitic stainless steel using Nd:YAG -laser with filler wire and hybrid process

Advanced laser applications in microelectronics and data storage devices

Y. F. Lu; W. D. Song; Z. M. Ren; C. W. An; D. M. Liu; W. J. Wang; B. J. Cho; J. N. Zeng; C. F. Tan

ICALEO 2002; 168523https://doi.org/10.2351/1.5066194

View Articletitled, Advanced laser applications in microelectronics and data storage devices

From macro to micro – The development of laser ablation

Michael Kuhl

ICALEO 2002; 168615https://doi.org/10.2351/1.5066196

View Articletitled, From macro to micro – The development of laser ablation

High-performance beam positioning in laser micromachining

Corey Dunsky

ICALEO 2002; 168923https://doi.org/10.2351/1.5066198

View Articletitled, High-performance beam positioning in laser micromachining

Laser beam welding of aircraft fuselage panels

Jörg Schumacher; Ingo Zerner; Gerhard Neye; Kai Thormann

ICALEO 2002; 169323https://doi.org/10.2351/1.5066201

View Articletitled, Laser beam welding of aircraft fuselage panels

Keyhole laser spot welding

Alexander F. H. Kaplan; Masami Mizutani; Seiji Katayama; Akira Matsunawa

ICALEO 2002; 169925https://doi.org/10.2351/1.5066203

View Articletitled, Keyhole laser spot welding

Progress in laser annealing for low-temperature semiconductor processing and its application to advanced electronics and display devices

T. Sameshima

ICALEO 2002; 170626https://doi.org/10.2351/1.5066206

View Articletitled, Progress in laser annealing for low-temperature semiconductor processing and its application to advanced electronics and display devices

Microstructures of laser welded steels

N. A. McPherson; H. Samson; T. N. Baker; N. Suarez-Fernandez

ICALEO 2002; 172028https://doi.org/10.2351/1.5066212

View Articletitled, Microstructures of laser welded steels

Micro-structuring of photo resists by UV laser radiation

Andreas Ostendorf; Klaus Körber; Frank Meyer

ICALEO 2002; 186530https://doi.org/10.2351/1.5066218

View Articletitled, Micro-structuring of photo resists by UV laser radiation

Laser welding of aluminum alloys: Problems, approaches for improvement and applications

Friedrich Dausinger; Peter Berger; Helmut Hügel

ICALEO 2002; 287255https://doi.org/10.2351/1.5065733

View Articletitled, Laser welding of aluminum alloys: Problems, approaches for improvement and applications

Physics, chemistry and microwelding

W. W. Duley

ICALEO 2002; 339177https://doi.org/10.2351/1.5065735

View Articletitled, Physics, chemistry and microwelding

Basic processes in deep penetration laser welding

Rémy Fabbro

ICALEO 2002; 380288https://doi.org/10.2351/1.5065737

View Articletitled, Basic processes in deep penetration laser welding

Laser enhanced processing methods for FPD manufacturing

Brian Hoekstra; Roger Flannigan; Dan Wegerif

ICALEO 2002; 566233https://doi.org/10.2351/1.5065749

View Articletitled, Laser enhanced processing methods for FPD manufacturing

Laser machining of silicon using diode-pumped solid state & CO₂ lasers

T. Corboline; A. P. Hoult

ICALEO 2002; 584220https://doi.org/10.2351/1.5065750

View Articletitled, Laser machining of silicon using diode-pumped solid state & CO<sub>2</sub> lasers

High quality laser microcutting of difficult-to-cut materials - Copper and silicon wafer

G. C. Lim; Tuan Anh Mai; David Low; Qiong Chen

ICALEO 2002; 806103https://doi.org/10.2351/1.5065764

View Articletitled, High quality laser microcutting of difficult-to-cut materials - Copper and silicon wafer

Dicing of gallium arsenide (GaAs) wafers with the laser MicroJet^® challenges, improvements and safety issues

Natalia M. Dushkina; Bernold Richerzhagen

ICALEO 2002; 851160https://doi.org/10.2351/1.5065771

View Articletitled, Dicing of gallium arsenide (GaAs) wafers with the laser MicroJet<sup>®</sup> challenges, improvements and safety issues

Section E - Forming Cutting Drilling and Other Applications

The effect of temporal pulse shape on drilling efficiency

Cho Lik Chan; David W. Campbell; Andrew E. Palu

ICALEO 2002; 21694https://doi.org/10.2351/1.5065725

View Articletitled, The effect of temporal pulse shape on drilling efficiency

Towards a solution of laser welding of zinc coated steel sheets

M. M. S. Gualini; S. A. Mehmood; I. Awan

ICALEO 2002; 48673https://doi.org/10.2351/1.5065741

View Articletitled, Towards a solution of laser welding of zinc coated steel sheets

Advantages of clearweld technology for polyamides

Val A. Kagan; Nicole M. Woosman

ICALEO 2002; 65923https://doi.org/10.2351/1.5065754

View Articletitled, Advantages of clearweld technology for polyamides

Nanostructuring of metal layers and transparent materials with femtosecond laser pulses

F. Korte; J. Koch; S. Nolte; C. Fallnich; A. Ostendorf; B. N. Chichkov

ICALEO 2002; 102823https://doi.org/10.2351/1.5066115

View Articletitled, Nanostructuring of metal layers and transparent materials with femtosecond laser pulses

Orthotropic automotive frame design considerations (without hydroforming)

ICALEO 2002; 105126https://doi.org/10.2351/1.5066116

View Articletitled, Orthotropic automotive frame design considerations (without hydroforming)

Line induced thermal strain forming

David E. Peck; Gerald Jones; Michele Mossman

ICALEO 2002; 105863https://doi.org/10.2351/1.5065579

View Articletitled, Line induced thermal strain forming

High speed drilling of metals with a long pulse XeCl excimer laser

Aart Schoonderbeek; Cornelis A. Biesheuvel; Ramon M. Hofstra; Klaus-J. Boller; Johan Meijer

ICALEO 2002; 115127https://doi.org/10.2351/1.5065583

View Articletitled, High speed drilling of metals with a long pulse XeCl excimer laser

Atmospheric affects on ultrashort-pulsed material processing

Larry A. Walker, II; Robert L. Maynard; William Clark

ICALEO 2002; 144419https://doi.org/10.2351/1.5066124

View Articletitled, Atmospheric affects on ultrashort-pulsed material processing

A thin-film model for flow of molten metal on a substrate during pulsed laser micromachining

Vladimir S. Ajaev; David A. Willis

ICALEO 2002; 149317https://doi.org/10.2351/1.5066126

View Articletitled, A thin-film model for flow of molten metal on a substrate during pulsed laser micromachining

Optimal process planning for laser forming of doubly curved shapes

Chao Liu; Y. Lawrence Yao; Vijay Srinivasan

ICALEO 2002; 152131https://doi.org/10.2351/1.5065596

View Articletitled, Optimal process planning for laser forming of doubly curved shapes

Effects of gas medium on femtosecond laser beam delivery

J. Sun; J. P. Longtin

ICALEO 2002; 155734https://doi.org/10.2351/1.5065601

View Articletitled, Effects of gas medium on femtosecond laser beam delivery

Forming characteristics of thin metal plate with diode laser beam

Toshiyuki Miyazaki; Tadashi Misu; Shunro Yoshioka; Tsuyoshi Tokunaga; Masatoshi Saito

ICALEO 2002; 155937https://doi.org/10.2351/1.5065602

View Articletitled, Forming characteristics of thin metal plate with diode laser beam

Strain gauge analysis of laser forming

S. P. Edwardson; K. G. Watkins; G. Dearden; P. French; J. Magee

ICALEO 2002; 156643https://doi.org/10.2351/1.5065607

View Articletitled, Strain gauge analysis of laser forming

Modeling thermal effects produced by nanosecond and femtosecond laser pulses applied to metals

S. Valette; R. Le Harzic; E. Audouard; N. Huot; R. Fortunier

ICALEO 2002; 159786https://doi.org/10.2351/1.5065630

View Articletitled, Modeling thermal effects produced by nanosecond and femtosecond laser pulses applied to metals

Laser rock drilling by a super-pulsed CO₂ laser beam

Z. Xu; C. B. Reed; R. A. Parker; B. C. Gahan; R. M. Graves; H. Figueroa

ICALEO 2002; 160291https://doi.org/10.2351/1.5065633

View Articletitled, Laser rock drilling by a super-pulsed CO<sub>2</sub> laser beam

Numerical and experimental investigation of laser-driven micro-airplane

Takashi Yabe; Yoichi Ogata; Masashi Yamaguchi; Ryo Nakagawa; Keiichi Aoki

ICALEO 2002; 161511https://doi.org/10.2351/1.5066145

View Articletitled, Numerical and experimental investigation of laser-driven micro-airplane

Laser welding of dissimilar alloys

Arvind Bharti; N. D. Pandey

ICALEO 2002; 163612https://doi.org/10.2351/1.5066157

View Articletitled, Laser welding of dissimilar alloys

Increasing the accuracy of 3-D laser cutting using CAD model/workpiece adjustment

H. K. Tönshoff; A. Ostendorf; J. Werhahn

ICALEO 2002; 164315https://doi.org/10.2351/1.5066161

View Articletitled, Increasing the accuracy of 3-D laser cutting using CAD model/workpiece adjustment

Characterization of laser bending under different cooling conditions

Liqun Li; Yanbin Chen; Shangyang Lin; Dayong Guo

ICALEO 2002; 167621https://doi.org/10.2351/1.5066190

View Articletitled, Characterization of laser bending under different cooling conditions

Numerical simulation of an impinging water jet applied to cooling human skin

Pezhman Akbari; Mohammad B. Shafii

ICALEO 2002; 169623https://doi.org/10.2351/1.5066202

View Articletitled, Numerical simulation of an impinging water jet applied to cooling human skin

Numerical analyses on texture formation on the silicon surface irradiated by nanosecond laser

Jun Maehara; Takashi Yabe; Ryuusuke Komura

ICALEO 2002; 171411https://doi.org/10.2351/1.5066209

View Articletitled, Numerical analyses on texture formation on the silicon surface irradiated by nanosecond laser

Welding thermoplastic elastomers to polypropylene with a diode laser

Bobbye Baylis; Ying Ping Huang; Dan Watt

ICALEO 2002; 171828https://doi.org/10.2351/1.5066211

View Articletitled, Welding thermoplastic elastomers to polypropylene with a diode laser

The effect of diode laser wavelength on the clearweld^™ welding process

A. P. Hoult; M. Burrell

ICALEO 2002; 584221https://doi.org/10.2351/1.5065751

View Articletitled, The effect of diode laser wavelength on the clearweld<sup>™</sup> welding process

Optimisation of laser percussion drilling for improved reliability

G. K. L. Ng; L. Li

ICALEO 2002; 799189https://doi.org/10.2351/1.5065762

View Articletitled, Optimisation of laser percussion drilling for improved reliability

Continuing development of a laser line forming system

E. W. Reutzel; J. U. Aburdene; K. J. Gombotz; J. P. Magnusen; R. P. Martukanitz; P. Michaleris; L. Zhang

ICALEO 2002; 867242https://doi.org/10.2351/1.5065772

View Articletitled, Continuing development of a laser line forming system

Section D - Laser Systems and Applications

Laser welding using Nd:YAG lasers up to 12 kW. Application to high thickness welding

F. Coste; F. Janin; L. Jones; R. Fabbro

ICALEO 2002; 26826https://doi.org/10.2351/1.5065732

View Articletitled, Laser welding using Nd:YAG lasers up to 12 kW. Application to high thickness welding

Cutting 50mm shipbuilding parts with less than 2kW of CO2 laser power

J. T. Gabzdyl; W. Penn; P. Cahill; J. Koch

ICALEO 2002; 106325https://doi.org/10.2351/1.5066117

View Articletitled, Cutting 50mm shipbuilding parts with less than 2kW of CO2 laser power

Measurement of the thermal properties of slate by the laser flash method

M. Boutinguiza; F. Lusquiños; J. Pou; R. Soto; F. Quintero; M. Pérez-Amor

ICALEO 2002; 109520https://doi.org/10.2351/1.5066118

View Articletitled, Measurement of the thermal properties of slate by the laser flash method

Laser welding of metal catalytic converters

A. S. Salminen; R. Lylykangas; H. Tuomola

ICALEO 2002; 119918https://doi.org/10.2351/1.5066120

View Articletitled, Laser welding of metal catalytic converters

Laser forming of metal foil by upsetting mechanism

R. Oba; S. Yoshioka; T. Miyazaki; K. Nakamura

ICALEO 2002; 152725https://doi.org/10.2351/1.5066127

View Articletitled, Laser forming of metal foil by upsetting mechanism

Monitoring of YAG laser spot welding-detection of porosity defect by acoustic signal-

Yukimichi Sasaki; Tadashi Misu; Shunro Yoshioka; Toshiyuki Miyazaki

ICALEO 2002; 152726https://doi.org/10.2351/1.5066128

View Articletitled, Monitoring of YAG laser spot welding-detection of porosity defect by acoustic signal-

Influence of process gases in welding with diode lasers

J. Berkmanns; W. Danzer; J. Härtl

ICALEO 2002; 156038https://doi.org/10.2351/1.5065603

View Articletitled, Influence of process gases in welding with diode lasers

Applicability of a high power diode laser to aluminum alloy welding

Abe Nobuyuki; Morikawa Atsuhito; Maeda Koichi; Namba Keizo

ICALEO 2002; 158972https://doi.org/10.2351/1.5065623

View Articletitled, Applicability of a high power diode laser to aluminum alloy welding

Laser fabrication of a hermetic, injectable medical stimulator package

J. Singh; G. E. Loeb

ICALEO 2002; 160197https://doi.org/10.2351/1.5065632

View Articletitled, Laser fabrication of a hermetic, injectable medical stimulator package

Nd:YAG and Nd:YAP solid-state laser systems with high beam quality and high average output power by fiber phase conjugate mirrors

Thomas Riesbeck; Hans-J. Eichler; Enrico Risse; Alexander Binder; Thomas Metzger; David Ashkenasi; Gerhard Müller

ICALEO 2002; 161219https://doi.org/10.2351/1.5066143

View Articletitled, Nd:YAG and Nd:YAP solid-state laser systems with high beam quality and high average output power by fiber phase conjugate mirrors

Finite element modeling of thermal behavior of molten pool in closed-loop controlled laser-based additive manufacturing

Dongming Hu; Radovan Kovacevic

ICALEO 2002; 162813https://doi.org/10.2351/1.5066150

View Articletitled, Finite element modeling of thermal behavior of molten pool in closed-loop controlled laser-based additive manufacturing

New developments in laser cladding for tool repair

H. Haferkamp; A. Ostendorf; J. Bunte; H. Becker; J. Werhahn; K. Lindemann; S. Czerner

ICALEO 2002; 165216https://doi.org/10.2351/1.5066169

View Articletitled, New developments in laser cladding for tool repair

Recent developments in laminated tooling by multiple laser processing

St. Nowotny; Th. Himmer; A. Techel; E. Beyer

ICALEO 2002; 166023https://doi.org/10.2351/1.5066179

View Articletitled, Recent developments in laminated tooling by multiple laser processing

Laser surface alloying of Mo - WC on titanium alloys

W. Pang; H. C. Man; T. M. Yue

ICALEO 2002; 166619https://doi.org/10.2351/1.5066182

View Articletitled, Laser surface alloying of Mo - WC on titanium alloys

High power disk laser technology – Design and potential for laser macro applications

Claus Emmelmann; Sönke Lunding

ICALEO 2002; 169223https://doi.org/10.2351/1.5066200

View Articletitled, High power disk laser technology – Design and potential for laser macro applications

Fiber-coupled high brightness, high power diode laser for solid-state laser pumping and material processing

Bodo Ehlers; Stefan Heinemann

ICALEO 2002; 173065https://doi.org/10.2351/1.5065717

View Articletitled, Fiber-coupled high brightness, high power diode laser for solid-state laser pumping and material processing

High-power, tunable, picosecond laser user facility

Michael J. Kelley; the Jefferson Lab FEL Team

ICALEO 2002; 682269https://doi.org/10.2351/1.5065755

View Articletitled, High-power, tunable, picosecond laser user facility

Section E - Forming Cutting Drilling and Other Application

The effects of steel composition on the laser cut edge quality of carbon and C-Mn steels

A. Lugan; P. A. Hilton; D. W. Taylor

ICALEO 2002; 161912https://doi.org/10.2351/1.5066146

View Articletitled, The effects of steel composition on the laser cut edge quality of carbon and C-Mn steels

Science of laser welding - Mechanisms of keyhole and pool dynamics

Akira Matsunawa

ICALEO 2002; 290https://doi.org/10.2351/1.5065734

View Articletitled, Science of laser welding - Mechanisms of keyhole and pool dynamics

Recent advancements of optical interferometry applied to medicine

M. M. S. Gualini; W. A. Khan; W. Sixt; H. Steinbichler

ICALEO 2002; 48676https://doi.org/10.2351/1.5065744

View Articletitled, Recent advancements of optical interferometry applied to medicine

Laser-Absorption dependence of SHG conversion efficiency by nonlinear optical crystal

Etsuji Ohmura; Kazufumi Nomura; Isamu Miyamoto

ICALEO 2002; 101418https://doi.org/10.2351/1.5066114

View Articletitled, Laser-Absorption dependence of SHG conversion efficiency by nonlinear optical crystal

Quantitative characterization of keyhole absorption mechanisms in 20 kW-class CO₂ laser welding processes

Jay F. Tu; Takashi Inoue; Isamu Miyamoto

ICALEO 2002; 140115https://doi.org/10.2351/1.5066122

View Articletitled, Quantitative characterization of keyhole absorption mechanisms in 20 kW-class CO<sub>2</sub> laser welding processes

Microscale laser shock processing (LSP) of metal thin films

Wenwu Zhang; Y. Lawrence Yao

ICALEO 2002; 153520https://doi.org/10.2351/1.5066129

View Articletitled, Microscale laser shock processing (LSP) of metal thin films

Study of optical property change in organic materials induced by ti:sapphire femtosecond laser

Liming He; Kok Ann Ngoi; Mufei Gong; Yuanzi Deng; Qi Yuan; Lee Huat Koh

ICALEO 2002; 159029https://doi.org/10.2351/1.5066134

View Articletitled, Study of optical property change in organic materials induced by ti:sapphire femtosecond laser

Laser integrated dry cleaning of mass production parts: Innovative solutions complete classic cleaning technologies

Wolfgang Schmidt

ICALEO 2002; 167321https://doi.org/10.2351/1.5066187

View Articletitled, Laser integrated dry cleaning of mass production parts: Innovative solutions complete classic cleaning technologies

In the beginning……..

P A Hilton

ICALEO 2002; 171727https://doi.org/10.2351/1.5066210

View Articletitled, In the beginning……..

Laser-matter interaction and applications to in-process monitoring in keyhole laser welding

Isamu Miyamoto

ICALEO 2002; 172629https://doi.org/10.2351/1.5066213

View Articletitled, Laser-matter interaction and applications to in-process monitoring in keyhole laser welding

Precision microwelding of thin metal sheet with fiber laser

Isamu Miyamoto; Seo-jeong Park; Toshihiko Ooie

ICALEO 2002; 172631https://doi.org/10.2351/1.5066214

View Articletitled, Precision microwelding of thin metal sheet with fiber laser

Hybrid welding of a large hollow section beam structure for a telescopic lifter

Jernström, P.J

ICALEO 2002; 183429https://doi.org/10.2351/1.5066215

View Articletitled, Hybrid welding of a large hollow section beam structure for a telescopic lifter

Functionally graded copper – steel using laser engineered net shaping^™ process

Fredrick F. Noecker, II; John N. DuPont

ICALEO 2002; 185430https://doi.org/10.2351/1.5066217

View Articletitled, Functionally graded copper – steel using laser engineered net shaping<sup>™</sup> process

Excimer-Laser activation of dopants in silicon for ultra-shallow junction application

Julien Venturini; Miguel Hernandez; Dorian Zahorski; Cyrille Laviron

ICALEO 2002; 187931https://doi.org/10.2351/1.5066219

View Articletitled, Excimer-Laser activation of dopants in silicon for ultra-shallow junction application

Introduction to micromachining with femtosecond laser pulses

Philippe Bado; Ali Said; William Clark

ICALEO 2002; 250279https://doi.org/10.2351/1.5065731

View Articletitled, Introduction to micromachining with femtosecond laser pulses

Studying of laser processed material optical parameter dependencies from temperature

V. Kovalenko; M. Anyakin; J. Meijer; A. Degtyarev; A. Kozyrev

ICALEO 2002; 726315https://doi.org/10.2351/1.5065759

View Articletitled, Studying of laser processed material optical parameter dependencies from temperature

Material processing with super-modulation

Tom Kugler; Mohammed Naeem

ICALEO 2002; 733150https://doi.org/10.2351/1.5065760

View Articletitled, Material processing with super-modulation

Role of recoil pressure, multiple reflections, and free surface evolution during laser keyhole welding

Jyotirmoy Mazumder; Hyungson Ki; Pravansu S. Mohanty

ICALEO 2002; 881291https://doi.org/10.2351/1.5065773

View Articletitled, Role of recoil pressure, multiple reflections, and free surface evolution during laser keyhole welding

LASER MICROFABRICATION CONFERENCE

Section A - Fundamental Investigations

A comparative study of the forming of EN3 mild steel sheets with CO₂ and high power diode lasers

J. Lawrence

ICALEO 2002; 162012https://doi.org/10.2351/1.5066147

View Articletitled, A comparative study of the forming of EN3 mild steel sheets with CO<sub>2</sub> and high power diode lasers