Skip Nav Destination

Laser Manufacturing for Future Mobility

This special issue highlights the newest advancements in laser material processing for the electric vehicle (EV) manufacturing industry, including laser welding, cutting, drilling, surface treatment and drying, and additive manufacturing techniques.

Guest Editors:
Barbara Previtali, Politecnico di Milano
Ali Gökhan Demir, Politecnico di Milano
Joerg Volpp, Luleå University of Technology
Christian Hagenlocher, Universität Stuttgart

Technical Articles

Characterization and simulation of AlSi10Mg reinforcement structures by direct energy deposition by means of laser beam and powder

Francesco Bruzzo; Matteo Alberghini; Andrea Bertinetti; Alessio Tommasi; Mirko Riede; Daniele Pullini; Elena López

https://doi.org/10.2351/7.0001416

Technical Articles

Laser powder bed fusion of a nanocrystalline Finemet Fe-based alloy for soft magnetic applications

S. Sadanand; M. Rodríguez-Sánchez; A. Ghavimi; R. Busch; P. Sharangi; P. M. Tiberto; E. Ferrara; G. Barrera; L. Thorsson; H. J. Wachter; I. Gallino; M. T. Pérez-Prado

https://doi.org/10.2351/7.0001391

Technical Articles

Study of burst mode for enhancing the ps-laser cutting performance of lithium-ion battery electrodes

Pourya Heidari Orojloo; Ali Gökhan Demir

https://doi.org/10.2351/7.0001417

Technical Articles

Investigating the ability of deep learning to predict welding depth and pore volume in hairpin welding

Amena Darwish; Stefan Ericson; Rohollah Ghasemi; Tobias Andersson; Dan Lönn; Andreas Andersson Lassila; Kent Salomonsson

https://doi.org/10.2351/7.0001509

Technical Articles

Hybrid use of a robotic welding system in remote laser separation of thin-sheet Al casings for the recycling of battery packs

Simone D’Arcangelo; Matteo Busatto; Leonardo Caprio; Barbara Previtali; Ali Gökhan Demir

https://doi.org/10.2351/7.0001359

Technical Articles

CFD modeling for predicting imperfections in laser welding and additive manufacturing of aluminum alloys

Ivan Bunaziv; Even Wilberg Hovig; Omar E. Godinez Brizuela; Kai Zhang; Xiang Ma; Xiaobo Ren; Magnus Eriksson; Paal Skjetne

https://doi.org/10.2351/7.0001401

Technical Articles

Material incorporation in powder sheet additive manufacturing toward lightweight designs for future mobility

Wenyou Zhang; Daniele Pullini; Matteo Alberghini; Andrea Bertinetti; Alessio Tommasi; Asli Coban; Seán McConnell; Himani Naesstroem; Ramesh Padamati Babu; Joerg Volpp; Rocco Lupoi

https://doi.org/10.2351/7.0001348

Technical Articles