... to emotions just coming “along for the ride” as epistemological stances shift. Jaber and co-authors similarly discuss affect as entangled with conceptual understandings and epistemologies for both individual learners (e.g., Jaber and Hammer, 2016a ; and Radoff et al., 2019 ) and for groups...

... to the ship,” used by the interviewer in the prompt, does not seem to cue an operational definition but, rather, is interpreted as a prompt for describing the subjective experience of a person riding on the ship. As with responses to other tasks shared previously, the student's reasoning seems rooted...

... in a collaborative group ( Zhang and Norman, 1994 ; and Zhang, 1997 ). To encourage individual learning and discourage free-riding, it is important for students to take on different roles every week and that the groups change members about every three weeks. Heller and Hollabaugh found that when using collaborative...

..., and tertiary ESS frequency control, respectively, range from 5 to 30 s to 40 to 60 min ( ReuB et al., 2017 ). Low voltage ride-through: Grid breakdown results in voltage dips. The ESS technology must have a very high power density and a rapid response time when there is a low voltage ride-through...

.../sciadv.aav7412 Wenyong , G.   , “ Enhancing low-voltage ride-through capability and smoothing output power of DFIG with a superconducting fault-current limiter-magnetic energy storage system ,” IEEE Trans. Energy Convers.   27 ( 2 ), 277 – 295 ( 2012 ). 10.1109/TEC.2012.2187654 Xhenhui , L...

... at the substrate-film interface. A longer Fe tail was observed due to the increase in the total surface riding Fe because of this delta doping ( Kalarickal et al., 2020 ). Alloys and Heterostructures Alloying of semiconductors allows for tuning of key properties like bandgap and lattice constant...

.... This is due to the Fe surface-riding effect during the growth of the epitaxial layers. High substrate temperature leads to an extension of the Fe tail deeper into the film ( Wong et al., 2015 ; and Mauze et al., 2019 ). To study how deep the Fe profile extends into an MOCVD-grown layer...

... to curb silicon surface riding. Also, the composition of β-(Al_xGa_1-x)₂O₃ barrier was maintained at or below 25% to maintain phase purity. Similar to MBE growth, SiO₂ hard mask was used to pattern and etch the Ohmic regions. 150 nm thick n...

..., whether on playground swings or on large pendulum rides in amusement parks, can be illustrated with simple equipment like a short slinky or a mug of water. The forces can also be measured with smartphones or other sensors moving with you. Mathematical relations between pendulum length and period can...

... for fault ride-through ,” Renew. Power Gener. IET   7 , 18 – 27 ( 2013 ). 10.1049/iet-rpg.2012.0130 Carrasco , J. M. , Franquelo , L. G. , Bialasiewicz , J. T. , Galvan , E. , Guisado , R. C. P. , and Prats , M. A. M. , “ Power-electronic systems for the grid integration...

...Introduction The integration of a large amount of wind turbine (WT) generators into the power grids in recent years, specifically distribution networks, introduced several challenges to the network operators, which has become a key problem; thus, new grid codes have been proposed. Fault ride...

.... Chapter 11: Provides a comprehensive overview of the role of Internet of Things and Big Data Analytics in optimization and management of future distribution networks. Chapter 12: Proposes control techniques for fault ride through capability improvement of wind turbines in distribution networks. I would...