This paper investigates the parameter optimization of isotropic bulk silicon microscale etching using an inductively coupled plasma-deep reactive ion etching (ICP-DRIE) system. Etch profile characteristics, depending on the process and feature size, have been studied. The authors report detailed observations of the results for various etching parameters, including pressure from 30 to 70 mTorr, sulfur hexafluoride flow rate from 100 to 500 sccm, platen power from 20 to 150 W, and ICP power from 2000 to 2500 W. The goal here is to present anisotropic and isotropic etch processes for a wide range of applications in microfluidics, microelectromechanical-systems, and micro-optoelectronic mechanical system fabrication. A deep anisotropic etch through a 1.4 mm thick silicon wafer with smoothly etched surfaces has been achieved. Isotropic plasma etching is obtained, including a relation between the etching depth, the undercut, and the normalized radius of curvature of the profile. The authors have demonstrated an isotropic plasma potential that is much higher than those that can be produced by isotropic wet etching of silicon for the generation of more complex forms such as the manufacturing microlens molds. In particular, the authors have presented the possibility of creating aspheric shapes with a desirable negative conic constant (k<0) and a potential high numerical aperture. The choice of using photoresist masks provides better flexibility and economical processing. The presented results can be valuable for a wide range of applications, thus allowing a massive production using only a single commercial ICP-DRIE tool, which is of low cost and is compatible with an industrial perspective.

1.
M.
Mita
,
Y.
Mita
,
H.
Toshiyoshi
, and
H.
Fujita
,
IEEJ Trans. Sensors Micromach.
120
,
493
(
2000
).
2.
S. C.
Chen
,
Y. C.
Lin
,
J. C.
Wu
,
L.
Horng
, and
C. H.
Cheng
,
Microsyst. Technol.
13
,
465
(
2006
).
3.
Y.
Mita
,
M.
Kubota
,
T.
Harada
,
F.
Marty
,
B.
Saadany
,
T.
Bourouina
, and
Tadashi
Shibata
,
J. Micromech. Microeng.
16
,
S135
(
2006
).
4.
J.
Ohara
,
Y.
Takeuchi
, and
K.
Sato
,
J. Micromech. Microeng.
19
,
095022
(
2009
).
5.
V. M.
Donnelly
and
A.
Kornblit
,
J. Vac. Sci. Technol. A
31
,
050825
(
2013
).
6.
H. V.
Jansen
,
M. J. d.
Boer
,
S.
Unnikrishnan
,
M. C.
Louwerse
, and
M. C.
Elwenspoek
,
J. Micromech. Microeng.
19
,
033001
(
2009
).
7.
P. B.
Vigneron
,
F.
Joint
,
N.
Isac
,
R.
Colombelli
, and
E.
Herth
,
Microelectron. Eng.
202
,
42
(
2018
).
8.
H.
Lavasani
,
R.
Abdolvand
, and
F.
Ayazi
,
IEEE Trans. Ultrason. Ferroelectr. Freq. Control
62
,
802
(
2015
).
9.
E.
Herth
,
L.
Valbin
,
F.
Lardet-Vieudrin
, and
E.
Algré
,
Microsyst. Technol.
23
,
9
(
2015
).
10.
Z.
Xiong
,
E.
Mairiaux
,
B.
Walter
,
M.
Faucher
,
L.
Buchaillot
, and
B.
Legrand
,
Sensors
14
,
20667
(
2014
).
11.
J.
Rutkowski
et al.,
Sens. Actuators A
216
,
386
(
2014
).
12.
H.
Berthet
,
J.
Jundt
,
J.
Durivault
,
B.
Mercier
, and
D.
Angelescu
,
Lab Chip
11
,
215
(
2011
).
13.
S.
Petralia
,
G.
Panvini
, and
G.
Ventimiglia
,
BioNanoScience
5
,
150
(
2015
).
14.
M. J. d.
Boer
,
R. W.
Tjerkstra
,
J. W.
Berenschot
,
H. V.
Jansen
,
G. J.
Burger
,
J. G. E.
Gardeniers
,
M.
Elwenspoek
, and
A. v. d.
Berg
,
J. Microelectromech. Syst.
9
,
94
(
2000
).
15.
J.
Marzouk
,
S.
Arscott
,
A.
El Fellahi
,
K.
Haddadi
,
C.
Boyaval
,
S.
Lepilliet
,
T.
Lasri
, and
G.
Dambrine
,
Sens. Actuators A
238
,
51
(
2016
).
16.
J.
Albero
,
L.
Nieradko
,
C.
Gorecki
,
H.
Ottevaere
,
V.
Gomez
,
H.
Thienpont
,
J.
Pietarinen
,
B.
Päivänranta
, and
N.
Passilly
,
Opt. Express
17
,
6283
(
2009
).
17.
K. P.
Larsen
,
J. T.
Ravnkilde
, and
O.
Hansen
,
J. Micromech. Microeng.
15
,
873
(
2005
).
18.
K. P.
Larsen
,
D. H.
Petersen
, and
O.
Hansen
,
J. Electrochem. Soc.
153
,
G1051
(
2006
).
19.
B.
Hanrahan
,
C. M.
Waits
, and
R.
Ghodssi
,
J. Micromech. Microeng.
24
,
015021
(
2014
).
20.
J.
Lullin
,
S.
Bargiel
,
P.
Lemoal
,
S.
Perrin
,
J.
Albero
,
N.
Passilly
,
Luc
Froehly
,
F.
Lardet-Vieudrin
, and
C.
Gorecki
,
J. Micromech. Microeng.
25
,
115013
(
2015
).
21.
T.
Zhu
,
P.
Argyrakis
,
E.
Mastropaolo
,
K. K.
Lee
, and
R.
Cheung
,
J. Vac. Sci. Technol. B
25
,
2553
(
2007
).
22.
C.
Iliescu
,
J.
Jing
,
F. E. H.
Tay
,
J.
Miao
, and
T.
Sun
,
Surf. Coat. Technol.
198
,
314
(
2005
).
23.
E.
Herth
,
N.
Rolland
, and
T.
Lasri
,
IEEE Antennas Wirel. Propag. Lett.
9
,
934
(
2010
).
24.
V.
Agache
,
E.
Quévy
,
D.
Collard
, and
L.
Buchaillot
,
Appl. Phys. Lett.
79
,
3869
(
2001
).
25.
E.
Herth
,
F.
Lardet-Vieudrin
,
L.
Valbin
, and
G.
Lissorgues
,
2016 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP)
, Budapest, Hungary, 30 May–2 June 2016 (IEEE, New York, 2016), pp. 1–4.
26.
E.
Herth
,
F.
Lardet-Vieudrin
,
F.
Deux
,
L.
Valbin
,
E.
Algré
,
J.
Schell
, and
H.
Steger
,
2016 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP)
, Budapest, Hungary, 30 May–2 June 2016 (IEEE, 2016), pp. 1–4.
27.
R. J.
Belen
,
S.
Gomez
,
M.
Kiehlbauch
,
D.
Cooperberg
, and
E. S.
Aydil
,
J. Vac. Sci. Technol. A
23
,
99
(
2005
).
28.
R. J.
Belen
,
S.
Gomez
,
M.
Kiehlbauch
, and
E. S.
Aydil
,
J. Vac. Sci. Technol. A
24
,
2176
(
2006
).
29.
S.
Gomez
,
R.
Jun Belen
,
M.
Kiehlbauch
, and
E. S.
Aydil
,
J. Vac. Sci. Technol. A
22
,
606
(
2004
).
30.
Z.
Ouyang
,
D. N.
Ruzic
,
M.
Kiehlbauch
,
A.
Schrinsky
, and
K.
Torek
,
J. Vac. Sci. Technol. A
32
,
041306
(
2014
).
31.
G. T. A.
Kovacs
,
N. I.
Maluf
, and
K. E.
Petersen
,
Proc. IEEE
86
,
1536
(
1998
).
32.
D.
Galayko
,
A.
Kaiser
,
L.
Buchaillot
,
B.
Legrand
,
D.
Collard
, and
C.
Combi
,
J. Micromech. Microeng.
13
,
134
(
2003
).
33.
F.
Marty
,
L.
Rousseau
,
B.
Saadany
,
B.
Mercier
,
O.
Français
,
Y.
Mita
, and
T.
Bourouina
,
Microelectron. J.
36
,
673
(
2005
).
34.
J.
Parasuraman
,
A.
Summanwar
,
F.
Marty
,
P.
Basset
,
D. E.
Angelescu
, and
T.
Bourouina
,
Microelectron. Eng.
113
,
35
(
2014
).
35.
R.
Legtenberg
,
H.
Jansen
,
M. d.
Boer
, and
M.
Elwenspoek
,
J. Electrochem. Soc.
142
,
2020
(
1995
).
36.
R. K.
Chutani
,
M.
Hasegawa
,
V.
Maurice
,
N.
Passilly
, and
C.
Gorecki
,
Sens. Actuators A
208
,
66
(
2014
).
37.
V.
Maurice
,
J.
Rutkowski
,
E.
Kroemer
,
S.
Bargiel
,
N.
Passilly
,
R.
Boudot
,
R.
Chutani
,
S.
Galliou
, and
C.
Gorecki
, “
Microfabricated vapor cells for miniature atomic clocks based on post-sealing activated cesium dispensers
,” in
International Frequency Control Symposium (IFCS), Joint with the 31st European Frequency and Time Forum (EFTF)
, Besançon, France, 9-13 July 2017 (IEEE, 2017), pp. 636–637.
38.
P.
Dixit
,
S.
Vähänen
,
J.
Salonen
, and
P.
Monnoyer
,
ECS J. Solid State Sci. Technol.
1
,
P107
(
2012
).
39.
R.
Li
,
Y.
Lamy
,
W. F. A.
Besling
,
F.
Roozeboom
, and
P. M.
Sarro
,
J. Micromech. Microeng.
18
,
125023
(
2008
).
40.
Z.
Yifan
,
C.
Sihai
,
S.
Edmond
, and
A.
Bosseboeuf
,
Jpn. J. Appl. Phys.
52
,
076503
(
2013
).
41.
J.
Albero
et al.,
Opt. Express
23
,
11702
(
2015
).
42.
D. G.
Abdelsalam
,
M. S.
Shaalan
,
M. M.
Eloker
, and
D.
Kim
,
Opt. Lasers Eng.
48
,
643
(
2010
).
43.
H.-D.
Ngo
et al.,
J. Phys.: Conf. Ser.
34
,
271
(
2006
).
44.
J.
Chung
,
C. P.
Grigoropoulos
, and
R.
Greif
,
Rev. Sci. Instrum.
74
,
2911
(
2003
).
You do not currently have access to this content.