In this article, the authors describe new approaches to synthesize and pattern surfaces with poly[oligo(ethylene glycol) methyl methacrylate] (POEGMA) polymer brushes synthesized by surface-initiated atom transfer radical polymerization. These patterned coatings confer “nonfouling” properties protein and cell resistance—to the surface in a biological milieu. The versatile routes for the synthesis of POEGMA demonstrated here offer clear advantages over other techniques previously used in terms of their simplicity, reliability, and ability to pattern large-area substrates. They also demonstrate that POEGMA polymer brushes can be patterned directly by photolithography, plasma ashing, and reactive ion etching to create patterns at the micro- and nanoscale over large areas with high throughput and repeatability, while preserving the protein and cell resistance of the POEGMA brush.
Skip Nav Destination
,
,
,
,
,
,
,
,
Article navigation
Research Article|
June 10 2009
Versatile synthesis and micropatterning of nonfouling polymer brushes on the wafer scale Open Access
Angus Hucknall;
Angus Hucknall
1Department of Biomedical Engineering,
Duke University
, Box 90281, Durham, North Carolina 277082Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 27708
Search for other works by this author on:
Andrew J. Simnick;
Andrew J. Simnick
1Department of Biomedical Engineering,
Duke University
, Box 90281, Durham, North Carolina 277082Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 27708
Search for other works by this author on:
Ryan T. Hill;
Ryan T. Hill
1Department of Biomedical Engineering,
Duke University
, Box 90281, Durham, North Carolina 277082Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 27708
Search for other works by this author on:
Ashutosh Chilkoti;
Ashutosh Chilkoti
a)
1Department of Biomedical Engineering,
Duke University
, Box 90281, Durham, North Carolina 277082Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 27708
Search for other works by this author on:
Andres Garcia;
Andres Garcia
2Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 277083Department of Mechanical Engineering and Materials Science,
Duke University
, Box 9030, Durham, North Carolina 27708
Search for other works by this author on:
Matthew S. Johannes;
Matthew S. Johannes
2Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 277083Department of Mechanical Engineering and Materials Science,
Duke University
, Box 9030, Durham, North Carolina 27708
Search for other works by this author on:
Robert L. Clark;
Robert L. Clark
2Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 277083Department of Mechanical Engineering and Materials Science,
Duke University
, Box 9030, Durham, North Carolina 27708
Search for other works by this author on:
Stefan Zauscher;
Stefan Zauscher
b)
2Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 277083Department of Mechanical Engineering and Materials Science,
Duke University
, Box 9030, Durham, North Carolina 27708
Search for other works by this author on:
Buddy D. Ratner
Buddy D. Ratner
4Department of Bioengineering and Chemical Engineering, UWEB,
University of Washington
, Seattle, Washington 98195
Search for other works by this author on:
Angus Hucknall
1,2
Andrew J. Simnick
1,2
Ryan T. Hill
1,2
Ashutosh Chilkoti
1,2,a)
Andres Garcia
2,3
Matthew S. Johannes
2,3
Robert L. Clark
2,3
Stefan Zauscher
2,3,b)
Buddy D. Ratner
4
1Department of Biomedical Engineering,
Duke University
, Box 90281, Durham, North Carolina 27708
2Center for Biologically Inspired Materials and Material Systems,
Duke University
, Durham, North Carolina 27708
3Department of Mechanical Engineering and Materials Science,
Duke University
, Box 9030, Durham, North Carolina 27708
4Department of Bioengineering and Chemical Engineering, UWEB,
University of Washington
, Seattle, Washington 98195a)
Author to whom correspondence should be addressed; electronic mail: [email protected]
b)
Author to whom correspondence should be addressed; electronic mail: [email protected]
Biointerphases 4, FA50–FA57 (2009)
Article history
Received:
April 24 2009
Accepted:
May 15 2009
Citation
Angus Hucknall, Andrew J. Simnick, Ryan T. Hill, Ashutosh Chilkoti, Andres Garcia, Matthew S. Johannes, Robert L. Clark, Stefan Zauscher, Buddy D. Ratner; Versatile synthesis and micropatterning of nonfouling polymer brushes on the wafer scale. Biointerphases 1 June 2009; 4 (2): FA50–FA57. https://doi.org/10.1116/1.3151968
Download citation file:
Citing articles via
Drug-eluting contact lenses: Progress, challenges, and prospects
Dongdong Gao, Chunxiao Yan, et al.
Surface potential modulates fibronectin adsorption and molecular interaction on graphene-based materials
Rohit, Rachayita Bharadwaj, et al.
Related Content
Efficient creation of cellular micropatterns with long-term stability and their geometric effects on cell behavior
Biointerphases (October 2011)
Comparative assessment of the stability of nonfouling poly(2-methyl-2-oxazoline) and poly(ethylene glycol) surface films: An in vitro cell culture study
Biointerphases (May 2014)
Micro- and Nanostructured Poly[oligo(ethylene glycol)methacrylate] Brushes Grown From Photopatterned Halogen Initiators by Atom Transfer Radical Polymerization
Biointerphases (February 2011)
Atomistic insight towards the impact of polymer architecture and grafting density on structure-dynamics of PEGylated bovine serum albumin and their applications
J. Chem. Phys. (February 2021)
Impacts of cross-linker chain length on the physical properties of polyampholyte hydrogels
Biointerphases (May 2019)