Challenges in measuring and quantifying sonic booms from Falcon-9 booster landings Free

Sonic booms from Falcon-9 booster landings contribute to the overall noise of the vehicle, but obtaining high-fidelity acoustical measurements and robust metric calculations of each sonic boom pose several challenges. This paper discusses three such challenges: sonic boom metric variability from differences in vehicle trajectory and meteorology, poor low-frequency response of low-sensitivity microphones, and contamination of the sonic boom by the landing burn noise. To quantify the variability between measurements, boom metrics are compared across four separate launches from Vandenberg Space Force Base. Boom metrics calculated from microphone stations at the same location differ by as much as 10 dB from launch to launch. Next, a digital pole-shift filter helps correct the low-frequency response of low-sensitivity microphones near the pad. These filters are adjusted so the waveforms more closely match those from microphones with a superior low-frequency response. Last, to obtain a clean sonic boom waveform, tracking the noise source location and peak frequency may help to distinguish where the sonic boom ends and landing burn noise starts. However, due to similar frequency content and close spacing in time, separating the boom from the landing burn noise near the pad remains a challenge for some booms. [Work supported by USACE.]