Existing diffraction correction models for ultrasonic transmit-receive measurement systems rely on simplifying assumptions with respect to the boundary conditions at the transmitter or receiver. Common simplifications include approximating the sound field radiated by a piezoelectric transducer using a baffled piston model and assuming that the receiver's electrical response is proportional to the spatially averaged free-field pressure over its front surface. In many applications, such simplifications may be adequate, but their validity and accuracy need to be evaluated and quantified. Here, a diffraction correction model utilizing the full set of electrical and mechanical boundary conditions at the transmitter and receiver is presented, avoiding these simplifications. The model is based on finite element modeling of coaxially aligned piezoelectric transducers in a fluid medium. Comparison is made with existing models for an example case of cylindrical piezoelectric ceramic disk transducers operating in air at 50–300 kHz and 0.03–2 m apart, relevant for, e.g., sound velocity and absorption measurements in fluids and ultrasonic gas flow metering. In the near-field, errors introduced by the simplifications are up to 3 dB and 47° for the first radial resonance. Generally, such errors are application-specific and depend on distance, frequency, transducer construction, vibration pattern, and medium properties.
Skip Nav Destination
Article navigation
October 2023
October 09 2023
Finite element-based diffraction correction for piezoelectric transducers accounting for diffraction at transmission, propagation, and reception
Eivind Nag Mosland
;
Eivind Nag Mosland
a)
1
Department of Physics and Technology, University of Bergen
, P.O. Box 7803, N-5020 Bergen, Norway
Search for other works by this author on:
Per Lunde;
Per Lunde
1
Department of Physics and Technology, University of Bergen
, P.O. Box 7803, N-5020 Bergen, Norway
Search for other works by this author on:
Jan Kocbach
Jan Kocbach
2
NORCE Norwegian Research Centre AS
, P.O. Box 22 Nygårdstangen, N-5838 Bergen, Norway
Search for other works by this author on:
a)
Email: [email protected]
J. Acoust. Soc. Am. 154, 2177–2190 (2023)
Article history
Received:
February 10 2023
Accepted:
September 21 2023
Citation
Eivind Nag Mosland, Per Lunde, Jan Kocbach; Finite element-based diffraction correction for piezoelectric transducers accounting for diffraction at transmission, propagation, and reception. J. Acoust. Soc. Am. 1 October 2023; 154 (4): 2177–2190. https://doi.org/10.1121/10.0021305
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
Vowel signatures in emotional interjections and nonlinguistic vocalizations expressing pain, disgust, and joy across languages
Maïa Ponsonnet, Christophe Coupé, et al.
The alveolar trill is perceived as jagged/rough by speakers of different languages
Aleksandra Ćwiek, Rémi Anselme, et al.
A survey of sound source localization with deep learning methods
Pierre-Amaury Grumiaux, Srđan Kitić, et al.
Related Content
Diffraction correction in high-precision pulse-echo and multiple-reflection ultrasonic measurement systems for fluids
J. Acoust. Soc. Am. (September 2024)
Finite element modeling of ultrasound measurement systems for gas. Comparison with experiments in air
J. Acoust. Soc. Am. (October 2018)
Errors using the spatially averaged free-field pressure approximation for description of the receiving properties of piezoelectric transducers
J Acoust Soc Am (October 2022)
Pulse duration, frequency band, and sweep direction effects on crosstalk in wideband backscattering measurements
J. Acoust. Soc. Am. (July 2024)
Ion Bernstein wave heating research—a review
AIP Conference Proceedings (September 1987)