Among the various techniques available, ultrasonic Lamb waves offer a convenient method of evaluating composite materials. Since the Lamb wave velocity depends on the elastic properties of a structure, an effective tool exists to monitor damage in composites by measuring the velocity of these waves. Lamb wave measurements can propagate over long distances and are sensitive to the desired in-plane elastic properties of the material. This paper describes two studies which monitor fatigue damage and two studies which monitor thermal damage in composites using Lamb waves. In the fatigue studies, the Lamb wave velocity is compared to modulus measurements obtained using strain gage measurements in the first experiment and the velocity is monitored along with the crack density in the second. In the thermal damage studies, one examines samples which were exposed to varying temperatures for a three minute duration and the second includes rapid thermal damage in composites by intense laser beams. In all studies, the Lamb wave velocity is demonstrated to be an excellent method to monitor damage in composites.
REFERENCES
1.
I. M. Daniel and O. Ishai, Engineering Mechanics of Composite Materials (Oxford U. P., New York, 1994), pp. 3–76.
2.
D. Stover, senior editor, “Composites Use Increases on New Commercial Transports…,” Advanced Composites 6, 30–40 (1991).
3.
Composites News, “Boron/Epoxy System to Repair Entire B-1 Fleet,” Advanced Composites 6, 18–20 (1991).
4.
T. K.
O’Brien
, M.
Rigamonti
, and C.
Zanotti
, “Tension fatigue analysis and life prediction for composite laminates
,” Int. J. Fatigue
11
, 379
–393
(1989
).5.
A. Charewicz and I. M. Daniel, “Damage mechanisms and accumulation in graphite/epoxy laminates,” in Composite Materials: Fatigue and Fracture, ASTM STP 907, edited by H. T. Hahn (American Society for Testing and Materials, Philadelphia, 1986), pp. 274–297.
6.
S. L.
Ogin
, P. A.
Smith
, and P. W. R.
Beaumont
, “Matrix cracking and stiffness reduction during the fatigue of a (0/90)s GFRP laminate
,” Compos. Sci. Technol.
22
, 23
–31
(1985
).7.
S. L.
Ogin
, P. A.
Smith
, and P. W. R.
Beaumont
, “A stress intensity factor approach to the fatigue growth of transverse ply cracks
,” Compos. Sci. Technol.
24
, 47
–59
(1985
).8.
S. G.
Lim
and C. S.
Hong
, “Prediction of transverse cracking and stiffness reduction in cross-ply laminated composites
,” J. Compos. Mater.
23
, 695
–713
(1989
).9.
N.
Laws
and G. J.
Dvorak
, “Progressive transverse cracking in composite laminates
,” J. Compos. Mater.
22
, 900
–916
(1988
).10.
K. N.
Street
, A. J.
Russell
, and F.
Bonsang
, “Thermal damage effects on delamination toughness of a graphite/epoxy composite
,” Compos. Sci. Technol.
32
, 1
–14
(1988
).11.
C. T.
Herakovich
and M. W.
Hyer
, “Damage-induced property changes in composites subjected to cyclic thermal loading
,” Eng. Fract. Mech.
25
, 779
–791
(1986
).12.
P. G. Ermer and S. Mall, “Damage mechanisms in a unidirectional metal matrix composite during thermal cycling,” in American Society for Composites, Technical Conference, 5th, East Lansing, MI, June 12–14, 1990, Proceedings (A91-26701 10-4) (Technomic, Lancaster, PA, 1990), pp. 528–536.
13.
K. E. Stansfield and E. Pritchard, “Damage Generation and Healing During Composite Thermal Spikes,” in Proceedings of the International SAMPE Technical Conference, 21st, Atlantic City, NJ, 25–28 Sept. 1989, pp. 120–129.
14.
M. J. Salkind, “Early Detection of Fatigue Damage in Composite Materials,” AIAA Paper No. 75-772, AIAA/ASME/SAE 16th Structures, Structural Dynamics, and Materials Conference (Denver, Colorado, 27–29 May 1975), pp. 1–8.
15.
W. W.
Stinchcomb
, “Nondestructive evaluation of damage accumulation processes in composite laminates
,” Compos. Sci. Technol.
25
, 103
–118
(1986
).16.
I. M. Daniel, S.-C. Wooh, and J.-W. Lee, “Nondestructive evaluation of damage development in composite materials,” in Elastic Waves and Ultrasonic Nondestructive Evaluation, edited by S. K. Datta, J. D. Achenbach, and Y. S. Rajapakse (Elsevier Science, Amsterdam, 1990), pp. 183–189.
17.
V. Dayal and V. K. Kinra, “Ultrasonic NDE of Composites for Transverse Cracking,” in Optical Methods in Composites; Proceedings of the SEM Fall Conference on Experimental Mechanics, Keystone, CO, 2–5 Nov. 1986 (A88-13876 03-24) (Society for Experimental Mechanics, Inc., Bethel, CT, 1986), pp. 17–22.
18.
B.
Tang
and E. G.
Henneke
II, “Lamb-wave monitoring of axial stiffness reduction of laminated composite plates
,” Mater. Eval.
47
, 928
–934
(1989
).19.
V. Dayal, V. Iyer, and V. K. Kinra, “Ultrasonic evaluation of microcracks in composites,” in Advances in Fracture Research; Proceedings of the Seventh International Conference on Fracture (ICF7), Houston, TX, 20–24 Mar. 1989, Vol. 5 (A90-41276 18-39) (Pergamon, Oxford, 1989), pp. 3291–3300.
20.
M. R.
Karim
, A. K.
Mal
, and Y.
Bar-Cohen
, “Inversion of leaky Lamb wave data by simplex algorithm
,” J. Acoust. Soc. Am.
88
, 482
–491
(1990
).21.
A. K. Mal, M. R. Gorman, and W. H. Prosser, “Material characterization of composite laminates using low-frequency plate wave dispersion data,” in Review of Progress in Quantitative Nondestructive Evaluation, edited by D. O. Thompson and D. E. Chimenti (Plenum, New York, 1992), Vol. 11, pp. 1451–1458.
22.
C. C.
Habeger
, R. W.
Mann
, and G. A.
Baum
, “Ultrasonic plate waves in paper
,” Ultrasonics
17
, 57
–62
(1979
).23.
R. A. Kline and M. M. Doroudian, “Ultrasonic evaluation of adhesively bonded composites using guided waves,” in Advances in Composite Materials and Structures (A91-23701 08-24) (American Society of Mechanical Engineers, New York, 1989), pp. 63–67.
24.
P. N. Dewen and P. Cawley, “An ultrasonic scanning technique for the quantitative determination of the cohesive properties of adhesive joints,” in Review of Progress in Quantitative Nondestructive Evaluation, edited by D. O. Thompson and D. E. Chimenti (Plenum, New York, 1992), Vol. 11, pp. 1253–1260.
25.
M. J. S.
Lowe
and P.
Cawley
, “The applicability of plate wave techniques for the inspection of adhesive and diffusion bonded joints
,” J. Nondestruct. Eval.
13
, 185
–200
(1994
).26.
Keun J. Sun, “Application of guided acoustic waves to delamination detection,” in Review of Progress in Quantitative Nondestructive Evaluation, edited by D. O. Thompson and D. E. Chimenti (Plenum, New York, 1992), Vol. 11, pp. 1213–1219.
27.
N.
Guo
and P.
Cawley
, “The interaction of Lamb waves with delaminations in composite laminates
,” J. Acoust. Soc. Am.
94
, 2240
–2246
(1993
).28.
N. Guo and P. Cawley, “Lamb waves for the NDE of composite laminates,” in Review of Progress in Quantitative Nondestructive Evaluation, edited by D. O. Thompson and D. E. Chimenti (Plenum, New York, 1992), Vol. 11, pp. 1443–1450.
29.
Y. Bar-Cohen and D. E. Chimenti, “NDE of defects in composites using leaky Lamb waves,” in Symposium on Nondestructive Evaluation, 15th, San Antonio, TX, 23–25 April 1985, Proceedings (A86-47129 22-38) (Nondestructive Testing Information Analysis Center, San Antonio, TX, 1986), pp. 202–208.
30.
K. Balasubramaniam and J. L. Rose, “Guided Plate Wave Potential for Damage Analysis of Composite Materials,” in Review of Progress in Quantitative Nondestructive Evaluation, edited by D. O. Thompson and D. E. Chimenti (Plenum, New York, 1990), Vol. 9, pp. 1505–1512.
31.
Y. J.
Lee
, B. T.
Khuri-Yakub
, and K. C.
Saraswat
, “Temperature measurements in rapid thermal processing using acoustic techniques
,” Rev. Sci. Instrum.
65
, 974
–976
(1994
).32.
J.
Pei
, F.
Levent Degertekin
, B. T.
Khuri-Yakub
, and K. C.
Sarawsat
, “In situ thin film thickness measurement with acoustic Lamb waves
,” Appl. Phys. Lett.
66
, 2177
–2179
(1995
).33.
J. J. Ditri, A. Pilarski, B. Pavlakovic, and J. L. Rose, “Generation of guided waves in a plate by axisymmetric normal surface loading,” in Review of Progress in Quantitative Nondestructive Evaluation, edited by D. O. Thompson and D. E. Chimenti (Plenum, New York, 1994), Vol. 13, pp. 133–140.
34.
W. H. Prosser, “The propagation of characteristics of the plate modes of acoustic emission waves in thin aluminum plates and thin graphite/epoxy composite plates and tubes,” Ph.D. thesis, The Johns Hopkins University, 1991.
35.
K.
Balasubramaniam
and J. L.
Rose
, “Physically based dispersion curve feature analysis in the NDE of composites
,” Res. Nondestruct. Eval.
3
, 41
–67
(1991
).36.
S. B.
Dong
and K. H.
Huang
, “Edge vibrations in laminated composite plates
,” J. Appl. Mech.
52
, 433
–438
(1985
).37.
S. K. Datta, A. H. Shah, and W. Karunasena, “Wave propagation in composite media and material characterization,” in Elastic Waves and Ultrasonic Nondestructive Evaluation, edited by S. K. Datta, J. D. Achenbach, and Y. S. Rajapakse (Elsevier Science, Amsterdam, 1990), pp. 159–167.
38.
M.
Caslini
, C.
Zanotti
, and T. K.
O’Brien
, “Study of matrix cracking and delamination in glass/epoxy laminates
,” J. Composites Technol. Res.
9
, 121
–130
(1987
).39.
W. H. Prosser, “Ultrasonic characterization of the nonlinear elastic properties of unidirectional graphite/epoxy composites,” NASA Contractor Report 4100, NASA Langley Research Center, October, 1987, p. 65.
This content is only available via PDF.
© 1998 Acoustical Society of America.
1998
Acoustical Society of America
You do not currently have access to this content.
