Social progress is inseparable from the utilization of energy, signals of extreme consumption of fossil energy and energy crisis appear frequently around the world. Human beings are paying more and more attention to new technologies and the sustainable development of energy collection and conversion. The emergence of piezoelectric, electromagnetic, electrostatic, and triboelectric mechanisms provides a variety of effective methods for new environmental energy collection and conversion technologies. Among them, the piezoelectric–electromagnetic hybrid energy harvester (P-EHEH) has been widely studied due to its high output power, simple structure, and easy miniaturization. Continuous progress has been made in the research of P-EHEH through theoretical exploration, structural optimization, and performance improvement. This Review focuses on the review of P-EHEH at the application level. A detailed introduction summarizes the research status of P-EHEH applied to human body devices, monitoring sensors, and power supply devices, as well as the development status of back-end electronic modules and interface circuits. The future challenges and development prospects of P-EHEH are anticipated.
Skip Nav Destination
A review of piezoelectric–electromagnetic hybrid energy harvesters for different applications
Article navigation
October 2023
Review Article|
October 05 2023
A review of piezoelectric–electromagnetic hybrid energy harvesters for different applications
Yuhang Han
;
Yuhang Han
(Conceptualization, Data curation, Formal analysis, Investigation, Software, Validation, Writing – original draft, Writing – review & editing)
1
School of Mechatronic Engineering, Changchun University of Technology
, Changchun, Jilin 130012, China
Search for other works by this author on:
Lipeng He
;
Lipeng He
a)
(Conceptualization, Funding acquisition, Resources, Supervision)
1
School of Mechatronic Engineering, Changchun University of Technology
, Changchun, Jilin 130012, China
2
Key Laboratory of CNC Equipment Reliability, Ministry of Education, Jilin University
, Changchun, Jilin 130022, China
a)Authors to whom correspondence should be addressed: lipeng_he@126.com
Search for other works by this author on:
Lei Sun;
Lei Sun
(Resources, Validation, Writing – review & editing)
1
School of Mechatronic Engineering, Changchun University of Technology
, Changchun, Jilin 130012, China
Search for other works by this author on:
Hongxin Wang;
Hongxin Wang
(Validation, Writing – review & editing)
1
School of Mechatronic Engineering, Changchun University of Technology
, Changchun, Jilin 130012, China
Search for other works by this author on:
Zhonghua Zhang
;
Zhonghua Zhang
(Project administration, Writing – review & editing)
3
Institute of Precision Machinery, Zhejiang Normal University
, Jinhua, Zhejiang 321004, China
Search for other works by this author on:
Guangming Cheng
Guangming Cheng
(Conceptualization, Funding acquisition)
3
Institute of Precision Machinery, Zhejiang Normal University
, Jinhua, Zhejiang 321004, China
Search for other works by this author on:
a)Authors to whom correspondence should be addressed: lipeng_he@126.com
Rev. Sci. Instrum. 94, 101501 (2023)
Article history
Received:
June 12 2023
Accepted:
September 20 2023
Citation
Yuhang Han, Lipeng He, Lei Sun, Hongxin Wang, Zhonghua Zhang, Guangming Cheng; A review of piezoelectric–electromagnetic hybrid energy harvesters for different applications. Rev. Sci. Instrum. 1 October 2023; 94 (10): 101501. https://doi.org/10.1063/5.0161822
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Sign in via your Institution
Sign in via your InstitutionPay-Per-View Access
$40.00
396
Views