Triggered gas switches with trigger electrodes, such as three-electrode spark switches and trigatron type spark switches, have been widely used in repetitive operating Marx generators due to their large current flowing capability. However, the ablation of trigger electrodes during repetitive operation is inevitable, which reduces the working life of triggered gas switches. In this paper, we introduced an over-voltage triggering method for two-electrode spark switches by replacing one of the charging inductors of the Marx generator with a pulse generator. The experimental results showed that a high-voltage trigger pulse with an amplitude of 60 kV and a rising speed of 7.65 kV/100 ns was obtained from a single stackable module with a 12 V lithium battery pack as the energy source. Due to the absence of trigger electrodes, the triggering method is beneficial to extend the lifetime of switches and realize a maintenance-free repetitive operating Marx generator.

Topics
Transformer, Electrodes, Electronic circuits, Pulse circuits, Pulse generators, Semiconductor switch, Sparkgap switches, Electric discharges, High voltage technology, Batteries
1.
G.
 
Mesyats
,
Pulsed Power
(
Springer
,
Berlin
,
2004
).
Google Scholar
 
2.
R.
 
Pecquois
,
L.
 
Pecastaing
,
M.
 
Rivaletto
,
A. S.
 
De Ferron
, and
R.
 
Vezinet
, “
MOUNA: An autonomous, compact, high-power, and wideband electromagnetic source based on a novel resonant pulsed transformer
,”
IEEE Trans. Plasma Sci.
 
40
,
1407
–
1415
(
2012
).
https://doi.org/10.1109/tps.2012.2189138
Google Scholar
Crossref
Search ADS
 
3.
G.
 
Winands
,
Z.
 
Liu
,
A.
 
Pemen
 et al., “
Long lifetime, triggered spark-gap switch for repetitive pulsed power applications
,”
Rev. Sci. Instrum.
 
76
,
085107
(
2005
).
https://doi.org/10.1063/1.2008047
Google Scholar
Crossref
Search ADS
 
4.
D.
 
Bhasavanich
,
S. S.
 
Hitchcock
, and
P. M.
 
Creel
, “
Development of a compact, high-energy spark gap switch and trigger generator system
,” in
IEEE International Pulsed Power Conference
(
IEEE
,
1991
), pp.
343
–
345
.
Google Scholar
Crossref
Search ADS
 
5.
C. M.
 
Xie
,
X. H.
 
Tan
, and
T.
 
Du
, “
Research on electrode ablation of gas spark switch
,”
High Power Laser Part. Beams
 
26
,
248
–
255
(
2014
).
https://doi.org/10.3788/hplpb20142601.15003
Google Scholar
Crossref
Search ADS
 
6.
M. B.
 
He
,
T.
 
Li
,
G. H.
 
Wu
,
C.
 
Jiang
, and
Z. P.
 
Li
, “
Trigger system of two-electrode gas spark switch
,”
High Power Laser Part Beams
 
6
,
951
–
955
(
2009
).
Google Scholar
 
7.
M.
 
Sack
,
C.
 
Schultheiss
, and
H.
 
Bluhm
, “
Wear-less trigger method for Marx generators in repetitive operation
,” in
14th IEEE International Pulsed Power Conference
(
IEEE
,
2003
), pp.
1415
–
1418
.
Google Scholar
Crossref
Search ADS
 
8.
L.
 
Yang
,
L.
 
Cheng
,
J. J.
 
Huang
,
D. G.
 
Lai
,
S. Q.
 
Ren
,
Y. Y.
 
Zhang
, and
Y. M.
 
Zhang
, “
The synchronous triggering system of the gas main switch of the flash No. 2 accelerator
,”
High Power Laser Part. Beams
 
019
(
6
),
997
–
1000
(
2006
).
Google Scholar
 
9.
R.
 
Chen
,
J. H.
 
Yang
,
X. B.
 
Cheng
, and
B. L.
 
Qian
, “
Preliminary study of all solid-state pulse drive source based on fractional ratio saturable pulse transformer
,”
High Power Laser Part. Beams
 
32
(
2
),
50
–
55
(
2020
).
https://doi.org/10.11884/HPLPB202032.190327
Google Scholar
 
10.
J. Y.
 
Geng
,
Research on Low Jitter Triggered Main Switch and Trigger Pulse
(
The University of Defense Technology
,
2018
) (in Chinese).
Google Scholar
 
11.
M.
 
Sack
 and
G.
 
Mueller
,
Testing of a modular over-voltage trigger device for Marx generators
, in
2014 International Conference on Optimization of Electrical and Electronic Equipment(OPTIM)
(
IEEE
,
2014
), pp.
33
–
34
.
Google Scholar
Crossref
Search ADS
 
© 2022 Author(s). Published under an exclusive license by AIP Publishing.
2022
Author(s)
You do not currently have access to this content.