A novel standing wave linear ultrasonic motor with double driving feet based on longitudinal-bending coupling mode is designed in this study. The motor adopts the bonded-type structure, and four pieces of piezoelectric ceramics on a metal beam are divided into two groups. Two voltages with 90° phase difference are applied to two groups of Pb-based lanthanumdoped zirconate titanates ceramics, respectively. Then the first longitudinal and second bending modes generated are superimposed on the stator, which can produce elliptical motion trajectories on the driving feet. The excitation method and driving mechanism of the motor are illustrated in detail. A finite model of the stator is established in the ANSYS parametric design language interface, and the operating mode of the stator and motion trajectories on the driving feet are discussed. The prototype is fabricated, and its impedance characteristics and mechanical output performance are tested. The results show that the maximal no-load velocity of the motor is ∼147.78 mm/s under a voltage of 200 V and a preload of 3 N. The maximum thrust force is ∼1.1 N when the voltage and preload are 200 V and 6 N, respectively.
Skip Nav Destination
Article navigation
February 2022
Research Article|
February 08 2022
A novel hybrid mode linear ultrasonic motor with double driving feet Available to Purchase
Daokuo Fu;
Daokuo Fu
School of Mechanical and Automotive Engineering, University of Engineering Science
, Shanghai 201620, China
Search for other works by this author on:
Pingqing Fan
;
Pingqing Fan
a)
School of Mechanical and Automotive Engineering, University of Engineering Science
, Shanghai 201620, China
a)Author to whom correspondence should be addressed: [email protected]
Search for other works by this author on:
Tao Yuan;
Tao Yuan
School of Mechanical and Automotive Engineering, University of Engineering Science
, Shanghai 201620, China
Search for other works by this author on:
Yansong Wang
Yansong Wang
School of Mechanical and Automotive Engineering, University of Engineering Science
, Shanghai 201620, China
Search for other works by this author on:
School of Mechanical and Automotive Engineering, University of Engineering Science
, Shanghai 201620, China
a)Author to whom correspondence should be addressed: [email protected]
Rev. Sci. Instrum. 93, 025003 (2022)
Article history
Received:
May 19 2021
Accepted:
January 16 2022
Citation
Daokuo Fu, Pingqing Fan, Tao Yuan, Yansong Wang; A novel hybrid mode linear ultrasonic motor with double driving feet. Rev. Sci. Instrum. 1 February 2022; 93 (2): 025003. https://doi.org/10.1063/5.0057254
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
Overview of the early campaign diagnostics for the SPARC tokamak (invited)
M. L. Reinke, I. Abramovic, et al.
Automated polarization rotation for multi-axis rotational-anisotropy second harmonic generation experiments
Karna A. Morey, Bryan T. Fichera, et al.
Refurbishment and commissioning of a dual-band 23/31 GHz tipping
radiometer at potential radio astronomical sites
J. Cuazoson, D. Hiriart, et al.
Related Content
A miniature longitudinal-bending hybrid linear ultrasonic motor inspired by the planar hinged five bar mechanism
Rev. Sci. Instrum. (May 2023)
Design and characteristic analysis of multi-degree-of-freedom ultrasonic motor based on spherical stator
Rev. Sci. Instrum. (February 2022)
A novel thin single-phase drive linear ultrasonic motor
Rev. Sci. Instrum. (March 2023)
A dual-stator threaded linear ultrasonic motor with preload mechanism
Rev. Sci. Instrum. (October 2024)
Design, fabricate, and experimental verification of an ultrasonic linear motor derived from V-type motors
Rev. Sci. Instrum. (April 2020)