This research work demonstrates an innovative technique to measure the thermal conductivity of a small volume of non-volatile liquids. The method utilizes a micro-pipette thermal sensor (MPTS) (tip diameter < 2 μm) and is based on laser point heating thermometry and transient heat transfer. A laser beam is irradiated at the sensor tip immersed in a few microliters of the test fluid and the transient temperature change is recorded with the sensor. This temperature change is dependent on the surrounding fluid’s thermal properties, such as thermal conductivity and diffusivity. The numerical solution for transient temperature profile for a point source is obtained using the finite element method in the COMSOL software. To determine the optimizing parameters such as thermal conductivity and power absorbed at the sensor tip, the multi-parameter fitting technique is used in MATLAB, which will fit the COMSOL simulation result with the experimental data. Three liquids with known thermal conductivity were tested to verify that the technique can be used to determine the thermal conductivity with high accuracy, and in addition, the thermal conductivity of growth media and serum used for culturing cancer cells is estimated. With the sensor size of 1-2 μm, we demonstrate the possibility of using this described method as the MPTS technique for measuring the thermal properties of microfluidic samples and biological fluids.
Skip Nav Destination
Article navigation
November 2018
Research Article|
November 09 2018
A micro-pipette thermal sensing technique for measuring the thermal conductivity of non-volatile fluids
R. Shrestha
;
R. Shrestha
1
Department of Mechanical and Energy Engineering, University of North Texas
, Denton, Texas 76207, USA
Search for other works by this author on:
R. Atluri;
R. Atluri
1
Department of Mechanical and Energy Engineering, University of North Texas
, Denton, Texas 76207, USA
Search for other works by this author on:
D. P. Simmons;
D. P. Simmons
2
Department of Chemistry, University of North Texas
, Denton, Texas 76201, USA
Search for other works by this author on:
D. S. Kim;
D. S. Kim
3
Department of Mechanical Engineering, POSTECH
, Pohang, Gyungbuk 790-784, South Korea
Search for other works by this author on:
T. Y. Choi
T. Y. Choi
1
Department of Mechanical and Energy Engineering, University of North Texas
, Denton, Texas 76207, USA
Search for other works by this author on:
Rev. Sci. Instrum. 89, 114902 (2018)
Article history
Received:
June 11 2018
Accepted:
October 22 2018
Citation
R. Shrestha, R. Atluri, D. P. Simmons, D. S. Kim, T. Y. Choi; A micro-pipette thermal sensing technique for measuring the thermal conductivity of non-volatile fluids. Rev. Sci. Instrum. 1 November 2018; 89 (11): 114902. https://doi.org/10.1063/1.5044214
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
An instrumentation guide to measuring thermal conductivity using frequency domain thermoreflectance (FDTR)
Dylan J. Kirsch, Joshua Martin, et al.
Overview of the early campaign diagnostics for the SPARC tokamak (invited)
M. L. Reinke, I. Abramovic, et al.
Optical prechamber-equipped high-pressure large-bore optical combustor for fundamental combustion studies
Daipayan Sen, Sayan Biswas
Related Content
Vibration study of the piezodriven pipettes immersed in viscous liquids
J. Appl. Phys. (October 2006)
Universal handheld micropipette
Rev. Sci. Instrum. (November 2016)
A study of the zona piercing process in piezodriven intracytoplasmic sperm injection
J. Appl. Phys. (August 2008)