This paper first presents a 3D analytical model for analyzing the radial air-gap magnetic field between the inner and outer magnetic rotors of the permanent magnet couplings by using the Amperian current model. Based on the air-gap field analysis, the eddy current loss in the isolation cover is predicted according to the Maxwell’s equations. A 3D finite element analysis model is constructed to analyze the magnetic field spatial distributions and vector eddy currents, and then the simulation results obtained are analyzed and compared with the analytical method. Finally, the current losses of two types of practical magnet couplings are measured in the experiment to compare with the theoretical results. It is concluded that the 3D analytical method of eddy current loss in the magnet coupling is viable and could be used for the eddy current loss prediction of magnet couplings.

1.
Y.
Kawase
,
T.
Yamaguchi
,
S.
Sano
,
M.
Igata
,
K.
Ida
, and
A.
Yamagiwa
, “
3-D eddy current analysis in a silicon steel sheet of an interior permanent magnet motor
,”
IEEE Trans. Magn.
39
(
3
),
1448
1451
(
2003
).
2.
N.
Takahashi
,
H.
Shinagawa
,
D.
Miyagi
,
Y.
Doi
, and
K.
Miyata
, “
Analysis of eddy current losses of segmented Nd-Fe-B sintered magnets considering contact resistance
,”
IEEE Trans. Magn.
45
(
3
),
1234
1237
(
2009
).
3.
K.
Yamazaki
,
M.
Shina
,
Y.
Kanou
,
M.
Miwa
, and
J.
Hagiwara
, “
Effect of eddy current loss reduction by segmentation of magnets in synchronous motors: Difference between interior and surface types
,”
IEEE Trans. Magn.
45
(
10
),
4756
4759
(
2009
).
4.
M.
Mirzaei
,
A.
Binder
, and
C.
Deak
, “
3D analysis of circumferential and axial segmentation effect on magnet eddy current losses in permanent magnet synchronous machines with concentrated windings
,” in
International Conference on Electrical Machines
(
IEEE
, September
2010
), pp.
1
6
.
5.
B.
Scheerlinck
,
H.
De Gersem
, and
P.
Sergeant
, “
3-D eddy current and fringing-flux distribution in an axial-flux permanent-magnet synchronous machine with stator in laminated iron or SMC
,”
IEEE Trans. Magn.
51
(
11
),
1
4
(
2015
).
6.
M.
Hofmann
,
T.
Werle
,
R.
Pfeiffer
 et al., “
2D and 3D numerical field computation of eddy-current brakes for traction
,”
IEEE Trans. Magn.
36
(
4
),
1758
1763
(
2000
).
7.
H.
De Gersem
,
S.
Vanaverbeke
, and
G.
Samaey
, “
Three-dimensional–two-dimensional coupled model for eddy currents in laminated iron cores
,”
IEEE Trans. Magn.
48
(
2
),
815
818
(
2012
).
8.
X.
Jiang
,
Y.
Zeng
, and
H.
Li
, “
A 2D-3D hybrid FEM approach for fast analysis of eddy current loss in magnets of PMSM driven by a PWM inverter
,” in
2015 IEEE Magnetics Conference (INTERMAG)
,
May 2015
.
9.
L.
Chen
,
J.
Wang
, and
S. S.
Nair
, “
An analytical method for predicting 3D eddy current loss in permanent magnet machines based on generalized image theory
,”
IEEE Trans. Magn.
52
(
6
),
1
11
(
2016
).
10.
S. S.
Nair
,
J.
Wang
,
R.
Chin
 et al., “
3D analytical slotting-effect model for predicting magnet eddy current loss in surface mounted PM machines
,” in
2015 IEEE Magnetics Conference (INTERMAG)
,
May 2015
.
You do not currently have access to this content.