For the purpose of MOS doping profile evaluation and generation time constant analysis a pulse capacitance measurement setup has been developed. The principle of operation consists in the capacitance of MOS varactors tuning the resonant frequency of a parallel resonant circuit. The range of capacitance measurement is 0–1000 pF, corresponding to the MHz range. First the pulse voltage ranges from 0 to ±100 V, and second the resolution of time ranges from 1 msec to 100 sec. So MOS‐doping profiles as well as transients of capacitance are available. The accuracy of capacitance measurements is better than 0.1%. Output of data is done by punched tape for subsequent evaluation on a desk calculator.
REFERENCES
1.
K.
Ziegler
, E.
Klausmann
, and S.
Kar
, Solid‐State Electron.
18
, 189
(1975
).2.
3.
D. M.
Brown
, R. J.
Connery
, and P. V.
Gray
, J. Electrochem. Soc.
122
(1
), 121
(1975
).4.
5.
K. H.
Zaininger
and F. P.
Heiman
, 13
(6
), 46
(1970
).6.
R. W. Landee, D. C. Doris, and A. P. Albrecht, Electronic‐Designer’s Handbook (McGraw‐Hill, New York, 1957), pp. 6–14.
This content is only available via PDF.
© 1976 American Institute of Physics.
1976
American Institute of Physics
You do not currently have access to this content.