Sawtooth oscillations (STO) in the Ohmically heated (OH) WT‐3 tokamak [Plasma Physics and Controlled Nuclear Fusion Research 1988 (IAEA, Vienna, 1989), Vol. 1, p. 563] are strongly modified or suppressed by localized electron cyclotron resonance heating (ECH) near the q=1 surface, where q refers to the safety factor. The effect of ECH is much stronger when it is applied on the high‐field side, as compared to the low‐field side. Complete suppression of the STO is achieved for the duration of the ECH when it is applied on the high‐field side, in a low‐density plasma, provided the ECH power exceeds a threshold value. This threshold decreases with the increasing safety factor at the limiter qL and the complete stabilization of STO can be obtained even when ECH is applied on the low‐field side in the high‐qL region. It is noticeable that these complete stabilizations can be obtained only by the localized ECH with the elliptic antenna. The STO stabilization is attributed to a modification of the current density profile by high‐energy electrons generated by ECH, which reduces the shear in the q=1 region.
Skip Nav Destination
Article navigation
August 1991
Research Article|
August 01 1991
Sawtooth stabilization by electron cyclotron heating at the q=1 surface in the WT‐3 tokamak
S. Tanaka;
S. Tanaka
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
K. Hanada;
K. Hanada
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
H. Tanaka;
H. Tanaka
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
M. Iida;
M. Iida
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
S. Ide;
S. Ide
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
T. Minami;
T. Minami
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
M. Nakamura;
M. Nakamura
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
T. Maekawa;
T. Maekawa
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
Y. Terumichi;
Y. Terumichi
Department of Physics, Faculty of Science, Kyoto University, Kyoto 606, Japan
Search for other works by this author on:
M. Yamada;
M. Yamada
Plasma Physics Laboratory, Princeton University, P.O. Box 451, Princeton, New Jersey 08543
Search for other works by this author on:
J. Manickam;
J. Manickam
Plasma Physics Laboratory, Princeton University, P.O. Box 451, Princeton, New Jersey 08543
Search for other works by this author on:
R. B. White
R. B. White
Plasma Physics Laboratory, Princeton University, P.O. Box 451, Princeton, New Jersey 08543
Search for other works by this author on:
Phys. Fluids B 3, 2200–2204 (1991)
Article history
Received:
November 16 1990
Accepted:
April 19 1991
Citation
S. Tanaka, K. Hanada, H. Tanaka, M. Iida, S. Ide, T. Minami, M. Nakamura, T. Maekawa, Y. Terumichi, M. Yamada, J. Manickam, R. B. White; Sawtooth stabilization by electron cyclotron heating at the q=1 surface in the WT‐3 tokamak. Phys. Fluids B 1 August 1991; 3 (8): 2200–2204. https://doi.org/10.1063/1.859636
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Sign in via your Institution
Sign in via your InstitutionPay-Per-View Access
$40.00