Hydrogen sorption by nanostructures at low temperatures (Review article)

The features of hydrogen sorption by a wide range of nanostructures — fullerite C₆₀, carbon nanotubes, graphene structures, nanodispersed carbon, including Pd-containing nanoclusters, ordered silicon-oxide-based nanostructures (the MCM-41 family) and silicon-oxide aerogel — have been reviewed. Special attention is given to the sorption characteristics of carbon nanostructures that have been exposed to various modifying treatments (oxidation, gamma-ray irradiation in gas atmosphere, action of pulsed high frequency gas discharge). Two mechanisms of physical low-temperature sorption of hydrogen have been revealed to predominate in such nanostructures in different temperature intervals. At the lowest temperatures (8–12 K), the sorption can actually proceed without thermal activation: it is realized through the tunnel motion of hydrogen molecules along the nanostructure surfaces. The periodic structure of the potential relief, allowed by the surface frame of carbon and silicon-oxide nanostructures, along the rather low interpit barriers are beneficial for the formation of low-dimensional (including quantum) hydrogen-molecule systems practically without thermally activated diffusion. In such nanostructures, the hydrogen diffusion coefficients are actually independent of temperature at 8–12 K. At higher temperatures (12–295 K), a thermally activated mechanism of hydrogen diffusion prevails. The periodic structure of fullerite C₆₀ contains periodic interstitial cavities, separated by rather low potential barriers. Their sizes are sufficient to accommodate impurity hydrogen molecules and, thus, allow diffusion processes, which can also have a tunnel nature. It is shown that gamma-irradiation and high-frequency gas discharge processing increase markedly the quantity of hydrogen strongly bonded to carbon nanostructures.